Tariff impact | 2025 Ford Superduty F250 F350 | Current rebates Incentives and discounts

[@tejaspics]

I can't wait to watch the tariff impact. Good luck!

[@CTECH-REVIEW]

Thanks for watching! We will be getting into the details on that!

[@dcl97]

I work at one of the big three. Production won't drop. The plants operate most efficiently at full rate production, so to offset some tariff costs they will probably be run at full rate for 8-9 months and then idled the rest of the year once days supply is 90+. The current plan is for a freeze on all new hires at plants, then offsetting production. So for example Warren will be idled and employees transferred to River Rouge, which itself will then get idled, employees transferred to Flat Rock, etc, etc. You will also see a mix of decontenting, price increases, and different incentives. Less "cash on the hood" and more lease renewal incentives, and long low interest loans. Why? Because those types of incentives also suppress the used market, and manufacturers need to keep moving new vehicles. If you can keep the monthly payments at or below a used car with loan rates and lease incentives a used car becomes less favorable to buyers.

[@CTECH-REVIEW]

Thanks for sharing this insider knowledge - it makes sense! I believe Ram is over 90 days currently of supply and Ford is close.

[@jetdoctn]

Just bought a 2024 F250 Tremor msrp was around 92,400 buying price was 85,415. It's one of the best equipped I could find that had no twin panel moonroof. Akins Ford in Winder, GA has a ton of F-250's and quite a few F-350's just not very many with cab lights and that was a must for me. Don't really see the prices coming down.

[@CTECH-REVIEW]

Congrats! It sounds like a great truck. I am still not seeing much in discounts beyound 1500-2500 in rebates.

[@NoLimitsCommemorativ]

Stellantis/Ram already proved the price gouging on these vehicles. The prices won't change, the CEO just won't be able to take home $39,000,000 again.

[@CTECH-REVIEW]

Going to be a wild market for automotive industry in 2025! Curious how this all plays out.

[@D3athM3tal-i4c]

Automakers created this issue by abandoning US workers for cheap labor in Mexico and not lowering prices

[@ril850_1]

How would you want prices to kept under control then?

[@CTECH-REVIEW]

Thank you for watching!

[@fozzybear9114]

Unions created this mess by getting drs wages doing a job ANYBODY can do. Getting free healthcare 10 yrs after employment doesnt seem to work?

[@scottsymons6152]

Here in Indiana...ton of inventory on all lots. Packed. Tariffs, won't just take off. Congress will throw their 2 cents in. Maybe a year away if it's implemented. Broncos are everywhere on lots. New and used.

[@CTECH-REVIEW]

Great to hear and thank you for watching in Indiana!

[@timdavison2417]

I DONT like the black out! They also try taking away options on the lower trim levels like no sattelite radio option. I dont want to be forced into a higher dollar pick up, and that is what they are pushing. I run regular cabs and I can't get near the options as i did in 21-22!!!

[@CTECH-REVIEW]

You are right about that, it makes it hard to get the truck you want!

[@texandy89]

You could also probably put a supercharger on the 7.3 liter Godzilla V8 man imagine the sound that would make and the horsepower too.

[@marcochavane3124]

The Whipple 3.0 makes around 750hp on a stock Godzilla.

[@CTECH-REVIEW]

7.3l supercharged is incredible!

[@texandy89]

@@CTECH-REVIEW oh yeah 👍

[@molin2]

Great info on the Mexican motor production. Is the 7.3 L engine also made in Mexico? Would make a great video to expand on the components in the Super Duty made outside the USA. I'm looking at an F350 SD to buy in 2025.

[@CrazyRedneck007]

Windsor, Ontario Canada for the 7.3 L

[@CTECH-REVIEW]

Made in Canada!

[@molin2]

@@CTECH-REVIEW Thanks for the info. So, the 7.3 L might cost more if USA invokes tariffs on Canada as well.

[@BryanVercoe]

My base 2024 Lariat has a dummy hub on the passenger side and pulls to the right on the highway quite significantly!

[@CTECH-REVIEW]

wow no joke, thank you for sharing.

[@JustAverageJeff]

These trucks should cost half as much as they do greedy greedy greedy.

[@CTECH-REVIEW]

Thank you for watching!

[@molin2]

It's not just the automakers greed though, the UAW has been squeezing the consumer and auto makers for years. I have a friend that works for Ford, they average 5-6 hours of work but get paid for 8 hrs. I have family members that work at Nissan, non-union plants, and the vehicles are lower cost and better made.

[@marthanewhouse7750]

Get rid of unions

[@TheDhagy]

Just so you know. Labor cost on vehicles is only 4-6% always has been. It stays the same while r&d are in the hundreds millions per model ​@@molin2

[@ril850_1]

Why is this even a thing, all I heard from the GOP was how expensive things were? It doesn’t matter where the car is made….a lot of parts and raw materials maybe sourced over seas.

[@CTECH-REVIEW]

I agree, it will be interesting to see what happens to car prices in 2025.

[@willito1211]

If that happens - wouldnt trade in values also go up? Reason being - lack of inventory - trade in value goes up. That was the whole COVID thing

[@CTECH-REVIEW]

I love that idea...and hopefully that is the case!

[@johnnyfreeman1018]

Do a 50% price increase on all the new trucks....at this point who cares?😂

[@CTECH-REVIEW]

That would be great...I just do not see it happening at this point!

[@brandonpittman5243]

Nobody buying shit right now only crazy people paying these prices

[@CTECH-REVIEW]

Shockingly be me all the sudden people are buying these 24 super duties. Everyone sees the big price increase on 2025 model year so they seem to be wanting to take advantage of the rebates right now. This is a confusing market!

[@brandonpittman5243]

@ not here inn the east coast. If they were selling there wouldn’t be 72 on the lot. Manufacturers have priced themselves outa customers. Even someone like me that can easily afford these trucks won’t buy one because 80k means more to me than any truck. You can’t devalue my money then expect me to be ok with the upcharge so I just will not buy. There are many just like me then there are the few that feels the need. The dealers and manufacturers are depending on that small percentage and it’s shrinking. Even business owners don’t see the point in spending that kind of money and in less than 50k miles it’s in the shop then when it’s outa warranty it needs an engine. We looked back at our service trucks and the older ones are still going all of our new trash was down it in the shop so we had to put our 01 7.3s and our 04 6.0 gas’s back in service. We lost over 500k in revenue plus down time and repairs trying to ruin these newer trucks. We spent 80k on 4 3500 gassers used in January 2023 just as a test and not one has had any issues to date. Every diesel from 2018 to 2023 has had something major go wrong before or after 100k miles except the duramax. We are getting a 7.3 gas ford in March I’ve heard good things abt it

[@jayb7102]

They will get rid of the dealers.

[@CTECH-REVIEW]

Thanks for watching!

[@aaronkelley8909]

Duramax is made in USA

[@CTECH-REVIEW]

Yes it is! Great motor too!

[@D3athM3tal-i4c]

Cummins engines for ram trucks are made in indiana

[@ril850_1]

@@aaronkelley8909 there’s more to a truck other than the drive train. What about hardware, metals, rubber, glass and interior. Ever take parts off your vehicle and see the made in “Mexico” or ________

[@itsallgood7483]

@@D3athM3tal-i4cthe Block is made in China I believe.

[@Liam-ql7tr]

LoL. … screw ford for over pricing trucks

[@CTECH-REVIEW]

Thank you for watching and the comment!

[@oddfish2560]

We have a 2024 F350 all this hoopla about the dummy hub is stupid, theres no “extra pull” or any other detrimental issues. The argument in and of itself is dumb🤦‍♂️

[@CTECH-REVIEW]

Great to hear, thank you for the comment. I haven't noticed it myself, but its always good to ask!

[@itsallgood7483]

There is a Ford TSB on the Dummy Hub issue. The dealer will revert back to the two Hub locking standards if there is a vibration/noise issue.

[@Tailwind1]

@@itsallgood7483 Please share the TSB #