Another great product and video. It's the first time ever that I got a bunch of parts before I got the bike they're meant for. Can't wait to have my Interceptor 650 finally delivered.
@greentrumpet5 жыл бұрын
Really interested in the exhaust and filter. Can you clear up a couple of points please? The video shows 53 bhp and 55ft/lb vs standard 51.5 bhp and 53.5 bhp. RE's official figure is 47 bhp. Normally you'd expect real bhp to be less than claimed bhp however the graph says "extra fuel" so has the mapping/ecu been worked on? 8bhp over standard is a lot and very worth having on a 47 bhp machine and would put it on a par with an original 850 Commando which (when running) was an awesome machine.
@morrisminor565 жыл бұрын
Got one ready to put in soon as bike run in,along with your £300 S/S silencer :)
@AYACSM5 жыл бұрын
Me too. I am expecting delivery of my bike in September and can't wait to change exhaust pipes and airfilter.
@jayprashanth5 жыл бұрын
@@AYACSM I booked this bike after seeing George's Scrambler conversion.
@davidfletchfletcher5 жыл бұрын
Do you need to wait for run-in? Just wondering why. Cheers.
@morrisminor565 жыл бұрын
@@davidfletchfletcher just want to wait for 1600 miles full run in before changing gas flow.at 950 now....
@gertbfrobe45025 жыл бұрын
Can't wait until this and the sump guard are on the US site. Hope the development is going well on the 2 into 1!
@donaldweston97764 жыл бұрын
Just got mine from TecBikePartsUSA. Thanks for the installation vid and filter. Good stuff.
@zardportugal5 жыл бұрын
That´s a proper job. Congrats.
@pswstoreonline11213 жыл бұрын
Wonderful job!! great tips and nice video!! crystal clear
@davidquoniou2835 жыл бұрын
thanks from France. really interesting. the seat and the rack in your bike is so cool . I don't see this in your website. good job
@georgemilburn62135 жыл бұрын
will be available soon
@davidquoniou2835 жыл бұрын
@@georgemilburn6213 cool thanks
@rhugh025 жыл бұрын
We need this at tecbikepartsusa!!!
@donaldweston97764 жыл бұрын
rhugh02 Just got mine from TecBikePartsUSA today.
@geopoliticalchangeneeded4 жыл бұрын
Hi TBP, if the air flow increases with the after market air filter, wouldn't the engine run lean? and is there a way to map the proportion or fuel intake and air?
@markmasztal22535 жыл бұрын
Great job George!
@tinks435 жыл бұрын
A nice little growl 👍🏻
@azradreamer63144 ай бұрын
Thank you for video! But in case exhaust is stock do I need to make some ECM tuning with special electronic equipment ?
@motot3adventure5 жыл бұрын
Just terrific. Awaiting your filter for the scrambler 1200. Have a wonderful day.
@MeAndMyRoyalEnfield2 жыл бұрын
I installed the Bandidos Pitstop Belt Drive Conversion Kit and love it. The front to rear sprocket is different and gives more torque but decreased mileage. Would installing this air filter give me better fuel mileage? Also some say when putting high flow air filter on we should run at idle for ten minutes before riding for the ECU to adjust to the air filter. Do you agree?
@righteousimmortaldivine81744 жыл бұрын
would a reflash be necessary or will the ecu be able to adapt w/ the air flow change?
@Kenkalsi3 жыл бұрын
How if we just open cap of stock filter? It might be due to more air rather than filter.
@davidfletchfletcher5 жыл бұрын
Purchased!
@jitendrakhatri90185 жыл бұрын
Can you put the air filter with stock exhaust and engine mapping ? Will it harm or improve engine performance and efficiency?
@timfractor5 жыл бұрын
Jitendra Khatri but if you remap you will lost warranty no ?
@TECBikeParts5 жыл бұрын
Hi, Yes works well with standard exhaust and no re map required. but to get the best from this bike you really need to change the exhaust system as it is horribly restricted. if you had to put bike in for warranty you can simply put the stock filter back in, only takes a few minutes. but most dealers are buying these to fit for customers so I cannot see it being an issue.
@droptuned835 жыл бұрын
@@TECBikeParts George may I just say say that I only found your channel/company recently but am very impressed with your content and products and developments. I am thinking of buying an Interceptor and would probably like a blacked out scrambler eventually so it would be like your development bike. Can you recommend a dealer to buy from. I have visited my local dealer but am not a huge fan of this shop and dont mind travelling to a good dealer. Also do you ever sell your ex development bikes?
@georgemilburn62135 жыл бұрын
@@droptuned83 Hi My local dealer M+S motorcycles of Newcastle are a great and long established dealer ,and if you mention me, they will give you a great deal.
@bazlink18404 жыл бұрын
Should you oil the new filter before installing it and do you need to grease the back edge of the filter?
@slimturnpike3 жыл бұрын
It comes already oiled.
@kentishdawdler27663 жыл бұрын
Thanks for the video. Stuart Fillingham's DNA video recommends letting the bike run at tick-over for 10 minutes after fitting so that the ECU "learns" the change and adjusts accordingly. Do you recommend the same procedure?
@caslanidis61353 жыл бұрын
since it allows air to pass through well, so it allows dust to pass through, before you put on the filter, look through it, you will see small holes.
@mrsilbo64993 жыл бұрын
Wrong! The cotton weave vibrates, allowing increased airflow, whilst the lubricant traps dirt particles. This air filter doesn't work the same way a paper element does.
@caslanidis61353 жыл бұрын
@@mrsilbo6499 I ordered this filter, sent it back because of holes one millimeter thick!
@gt650johnn4 жыл бұрын
Hi, I have the Continental GT650 and I have been thinking of installing this filter with the stage 2 cover. However, I live in a country with really strong rainy seasons. Is there any risk to the filter and the engine if I use this configuration to drive while raining or if the bike is parked under the rain?
@hemantv.54095 жыл бұрын
How much cost of the DNA in India..? Please let me know
@andrewbull35374 жыл бұрын
Long time no see ,how are you and the family getting on George ?,ok i hope , See you later,....will there be a part 5 for the enfield? 👍👍🇬🇧🇬🇧🇫🇷
@timfractor5 жыл бұрын
Hello awesome video, do you need to remap after change exhaust and air filter ? Cause I ask Royal endfield and they told me I lost warranty if I remap....
@katana2585 жыл бұрын
any co will tell you if you change a light bulb your warranty is gone .. even if its a brake pad ..defect .. any thing to not fix any thing their fault ..
@sathya50575 жыл бұрын
@@katana258 lul
@luiscosta72535 жыл бұрын
the fuel consumption? changes? regards
@bryanmedway30224 жыл бұрын
please can you tell me by fitting the DNA High Performance to my RE 650CC Interceptor does it effect my Warrenty in any way? Regards Bryan Medway
@bryanmedway30224 жыл бұрын
thankyou for your reply I will take your advice Regards Bryan M
@chrisbell71912 жыл бұрын
Did you oil the filter before putting it in and if so what did you use.cheers
@RiverwalkFunHouse5 жыл бұрын
Awesome video! I can't find any stats on the Interceptor 650 performancewise. Any know the stock 0-60 on these?
@georgemilburn62135 жыл бұрын
Bike magazine and Cycle World have both done in depth performance test reviews on the interceptor
@RiverwalkFunHouse5 жыл бұрын
@@georgemilburn6213 And?
@georgemilburn62135 жыл бұрын
@@RiverwalkFunHouse times vary on who is testing but around 5.8 for stock bike
@RiverwalkFunHouse5 жыл бұрын
@@georgemilburn6213 Thanks! I had checked Cycle World's two online articles and they just said N/A on the times. Appreciate it.
@cristian49634 жыл бұрын
Beautiful seat. Where did u get? From tec?
@chrisgentle31955 жыл бұрын
Hi George, I'm from Australia and have noticed some pre-detonation when riding at higher altitudes (800-1000 meters) I was running 91 octane fuel at the time but do you think using this air filter would help to prevent pre-detonation by making more air available?? I have also started using high octane fuel (98 ron)
@ferrumignis5 жыл бұрын
Engines suffer from pre-ignition and/or detonation; there is no such thing as pre-detonation. Detonation typically occurs under high engine loads, in this case allowing even more air into the cylinder will make things worse.
@PrateekLalShah5 жыл бұрын
Can't say anything about the 'pre-detonation', but using higher octane fuel on this bike is a waste of money. It wont make any difference whatsoever. In India at least, and I think the specifications are the same across the world for this bike, 91ron is recommended by the manufacturer, and that's more than sufficient. Typically higher octane fuel is needed for engines with high compression ratio, which this bike doesn't have.
@georgemilburn62135 жыл бұрын
Hi, We are currently working with booster plug on a special version for the RE 650, and this should help
@loneridermukesh29285 жыл бұрын
Sir, please make/try a nice windshield for interceptor 650 like Givi Airflow A660. Waiting for your response/video.
@chriscoates23993 жыл бұрын
Since ordering a DNA filter which i look forwards to . I've seen many negative videos on K&N letting dirt in , and damaging engines . Q should I have concerns for this with a DNA filter ?
@charliekiger2 жыл бұрын
That's what I was thinking, too. K&N Filters will outperform stock, until their first clean, then they'll run just like the stock filter, then after the second wash you're better off with a paper filter as far as keeping out contaminants. "Lifetime" product that lasts twice as long as the OE part. However, if he's correct about the OE filter being 25-30 bucks, and this one is less than 60, you're better off. I wouldn't go past 2 cleanings before replacing their "lifetime" filter.
@Chips6905 жыл бұрын
I noticed the Scrambler in the background! It’s got a nice tidy arse end!!! How’s that product coming along?
@georgemilburn62135 жыл бұрын
Sorry, some production delays, but should be ready soon
@jigmedewadorje22335 жыл бұрын
Do you know if I can find this in Toronto?
@TECBikeParts5 жыл бұрын
we can post from Uk, or our USA site will have them in October
@jigmedewadorje22335 жыл бұрын
TEC Bike Parts thanks
@geopoliticalchangeneeded4 жыл бұрын
Does run lean though??
@charliekiger2 жыл бұрын
No, fuel injection compensates for differences in air flow.
@joecamel68352 жыл бұрын
Yep
@michaelruatfelaralte845 жыл бұрын
I know its stupid but, please make a video on fixing the bar end mirror...i was told i need to drill.
@TECBikeParts5 жыл бұрын
We did one a few months ago, here is the link- kzbin.info/www/bejne/f4bdgXRvaqmZr7M
@JOPPEVANEENBERGEN5 жыл бұрын
Hi, which tires did you fit under this bike?
@katana2585 жыл бұрын
does the air box have a inside restrictor plate like the triumph ??
@georgemilburn62135 жыл бұрын
no plate inside but has long inlet tubes, we will be experimenting with different lengths when we do further tuning
@jigmedewadorje22335 жыл бұрын
Will it be bad for the bike if I cut the filter cover instead of buying a DNA filter
@TECBikeParts5 жыл бұрын
it does not work anywhere near as well as the DNA full kit
@jigmedewadorje22335 жыл бұрын
TEC Bike Parts thank you sir
@royalenfieldthug36514 жыл бұрын
Is there any mileage increase,if yes then how much? I have installed red rooster performance exhaust and planning to install these air filter too will these both together will increase my mileage or not?
@hiiiiivry4 жыл бұрын
I also waiting to get my dna air filter...with only RRP i felt power loss...but sounds grt
@hiiiiivry4 жыл бұрын
May power would increase if i install dna air filter with rrp...
@grahamtricker41035 жыл бұрын
If you allow more air to flow into the engine then surely you will need to remap the engine otherwise the extra air will weaken the mixture of fuel and air.
@katana2585 жыл бұрын
not always as the sensor can tell the ecu that more air is passing and thus more gas needed on some systems
@georgemilburn62135 жыл бұрын
Hi, that would be the case with a carb motor but EFI is not the same , as the motor knows what fuel it needs from the various sensor inputs.
@grahamtricker41035 жыл бұрын
@@georgemilburn6213 Only within very limited tolerances. Manufacturers including RE have to meet tight emission standards and do not account for owners who will modify from standard. Today's motorcycles are very sensitive of changes to exhaust and carburation and your RE will almost certainly need some adjustment to the fueling to prevent engine problems down the line.
@grahamtricker41035 жыл бұрын
@@katana258 to be sure you would need to put the bike on a rolling road and measure the fueling over the entire rev range. See my post above. The standard fuel injection only adjust for very small amounts of changes, not major changes.
@katana2585 жыл бұрын
I said on some systems .. not knowing r.e. system it was just a all around answer ... some do a wee bit some do not .. see the tec bike answer first hand to the bike as he rides it .. but I am sure with the mufflers and intake '' any '' remap will power up the bike for the better at higher rpm air intake ..but it seems it will be ok for now ..
@fasthracing5 жыл бұрын
Whats the air/fuel mix like with the part fitted?
@georgemilburn62135 жыл бұрын
Hi, We have checked A/F ratio on dyno with stock and aftermarket silencers, with DNA fitted and all run safe. As with all euro 4 bikes it would be very slightly better with a little more fuel during acceleration and we are developing a fuel device with boosterplug for this bike. But is safe to run with stock map,and bike runs well.
@DormanDiaries5 жыл бұрын
Tidy!
@logicalindian_7775 жыл бұрын
What tyres are you running?
@georgemilburn62135 жыл бұрын
K60 SCOUT
@andrewbull35375 жыл бұрын
Wouldn't the bike run better as well if you just left the air filter cover off ?? I'm not a mechanic but i thought it might work See you later mate
@ferrumignis5 жыл бұрын
Air filter cover? Do you mean the side panel?
@andrewbull35375 жыл бұрын
@@ferrumignis ,what i meant was the air filter intake ,(look at 2.10 seconds ) See you later, be safe on the road
@ferrumignis5 жыл бұрын
@@andrewbull3537 The cover holds the filter in and seals the end of the filter to the airbox so you have to have something there. This is why the metal plate from DNA is available as a replacement.
@andrewbull35375 жыл бұрын
@@ferrumignis ,yes you do need the replacement plate if you run the bike with an airfilter , But you could run the bike with no air filter (if your a savage like me ) See you on the road ,ride safe
@pascalbouldauduc42985 жыл бұрын
Hello from belgium, no problems whit afr ? To poor? Do you take the head temp before anb after filter placing? I don't think it is right for the motor without a afr calibration. Just my opinion...