I really can not emphasize enough how extremely grateful I am that you play absolutely no kind of music what so ever while you are verbally instructing and save it solely for interludes and transitions. I really enjoy the clarity of presentation I can absorb especially with my hearing condition. It is like chocolate for my brain.
@bubblezovlove72133 жыл бұрын
Yeah the overuse of music and various other production contaminants just isn't conducive to learning is it.....
@goutgang28752 жыл бұрын
I actually quiet enjoy the accompanying music normally it really gets me into what is being presented. However I can definitely see how it can be distracting for some to get their heads around. Good Commenting 🖐
@rorypenstock17632 жыл бұрын
I agree. And it would be even better with no music at all!
@thatfeeble-mindedboy2 жыл бұрын
@@goutgang2875
@thatfeeble-mindedboy2 жыл бұрын
Ytfp chris
@oldjavangelist557 Жыл бұрын
if every physics lesson in middle and high school had this clarity and narrative quality there would be a lot more physics majors in college. really enjoying this.
@markiobook8639 Жыл бұрын
100% agree. I had a physics teacher who taught us NOTHING that was on the final test for final year high school.
@skelitalmisfit126 жыл бұрын
Honestly, I think you are the one youtuber that I have ever been this satisfied with in regards to content. Your content is extremely thorough and very very interesting. You go in depth and extrapolate all the variables and interactions. I could not be happier watching your content Sir, thank you for doing what you're doing.
@AppliedScience6 жыл бұрын
Nice! Loading those magnets was definitely a nail-biter! Thanks for mentioning me. I can't wait to see your demos with this setup!
@jonholmes30136 жыл бұрын
Applied Science nice to see you here!!! I’m glad you as well are a viewer of this channel
@radicaicares6 жыл бұрын
Nail biter indeed.
@stuartpratt36626 жыл бұрын
I know I felt the magnetic tension and while I commend you on your bravery of handling the magnets like you did. I would have made a wooden jig that would fit the opening in such I would only need to push the magnet in with a controlled and safe manner
6 жыл бұрын
You know you've discovered a gem when Ben watches it.
@gilbertvelez47566 жыл бұрын
I really like your videos, Didn't know you were doing anything with magnetics, gotta check it out.
@rottenrobbie76 жыл бұрын
You, sir, are a top notch science communicator- and I don't say that lightly. Can't wait for the next instalment!
@TechIngredients6 жыл бұрын
Thank yo very much!
@lucaspatrick5425 жыл бұрын
Tech Ingredients: Greasing the channel before installment is necessary? It’s that strong?
@DKBrainard2 жыл бұрын
Totally agree that you are a great science communicator. I learned more about sound and electricity in your LRAD videos than just about all the reading I’ve done put together.
@kstricl6 жыл бұрын
Although scary, this certainly looks far better engineered and thought out than when Brainiac75 combined two 1200kg (2650lb) magnets. That or when the Waterjet channel cut a small neodymium magnet in half and the two halves accelerated apart like a bullet. I'm personally looking forward to more of this project.
@nebruin7776 жыл бұрын
Awesome video, your channel and Applied science are 2 of my favorite channels on youtube. Your's are one of the few doing real science and explaining it well
@DaLoopDiggerz6 жыл бұрын
Totally agree, no bs here. I'm guessing he is a professor somewhere ?
@andyjones71216 жыл бұрын
Agreed. I absolutely love this stuff. I've been researching magnets and building generators and motors with lots of big N52s for years but I've never seen real life gauss readings showing the effects of spacing and steel saturation. I'm glad you guys agree. I was beginning to think something was wrong with me :)
@brainiac756 жыл бұрын
Oh yes. Magnets of that size can give you a good workout. Nice to see how well-prepared you are (as always...). Otherwise this would have ended disastrous. Looking forward to more videos on this project!
@TechIngredients6 жыл бұрын
You would know about those challenges better than anyone and thanks, that's nice to hear!
@leibel14984 жыл бұрын
@@TechIngredients Thank you for your very educational and interesting videos I really appreciate it, but shouldn’t the effects of two magnets simply be the effects of the first and second magnet added together, I’m assuming that the charges/poles in a permanent magnet are fixed and don’t move in response to the field of another magnet, so shouldn’t it simply be a matter of adding up the force vectors (e.g. if two forces are equal but at right angles to each other then the final force should be 1.414 times as strong)
@awesomefeldmanfamily4 жыл бұрын
@brainiac lol I totally read that in your voice
@en2oh4 жыл бұрын
Neo magnets are pretty brittle.... did you crack any? What about thin sheet of teflon sheeting between the magnets and the yolk? Any reason not to use teflon?
@sempertard3 жыл бұрын
"Magnets of that size can give you a good workout." While you are running to the hand surgeon's office.
@TheVirindi6 жыл бұрын
What does the Gauss meter say when inserted into the large assembly? That's what we're all wondering :)
@RainbowSkyDancer6 жыл бұрын
Oh man, LOL yesss please :)
@andyjones71216 жыл бұрын
Wouldn't it be the same 550ish? Are you expecting it to be higher or lower? And why? This is the first comment I've read, so maybe I'll understand the rationale after reading the others :) I personally wouldn't expect it to change much, assuming the assembly has the same size and geometry of steel. Maybe the horizontal gaps between individual magnets change the overall field? Is that the theory?
@pyro13246 жыл бұрын
Andy Jones bigger magnets = stronger field
@glennlawrie-smith85706 жыл бұрын
It says... “Hello, I am Mr. Gauss. Can I talk to you today about Jesus your savior?”
@lorditsprobingtime66686 жыл бұрын
Glenn Lawrie-Smith. Good one. You made my day with that one lol.
@sashalofstrom66596 жыл бұрын
Wow...I'm in awe. So excited to see where this channel is headed, even moreso lately!!! Nice Applied Sci shout-out, too. Didn't know you guys knew each other. A collab would be scary awesome!
@sashalofstrom66596 жыл бұрын
Ahhhh man I can't wait for an update on the railgun...!!!! Gonna keep refreshing every day probably, lol. You're the only youtuber I can think of that would probably get it right!
@CaillouLP6 жыл бұрын
I clicked this at 3 am thinking this would be kind of boring and very complicated. But it was explained super well and definitely interesting.
@geneladner81235 жыл бұрын
I love watching a dedicated CRAFTSMAN at work, on ANYTHING, but especially so with MAGNETIC DYNAMICS!! Bravo, sir!!!
@elected0nes7413 жыл бұрын
The thing I've always found most fascinating about magnets is the repelling force you get when you face the same poles of two different magnets towards one another. As a kid I was never happy with just one magnet, I had to have a second one so that I could repel the other. lol, I'd never try and do that with magnets the size of the ones in this video though! 😉👍
@agranero6 Жыл бұрын
I love that natural way you explain without reading from a teleprompter like in a conversation over a coffee...you are a natural...I bet 1. You are a Physicist, maybe an Engineer 2. You were a teacher.
@alfredfazio6 жыл бұрын
No flux meter reading for the big guy? Interested to see what you guys do with this thing.
@ZigamusWizard Жыл бұрын
Thank you for displaying the proper amount of caution while handling those magnets. People need to realize that fingers have been totally smashed or severed by magnets this strong. THESE ARE NOT TOYS!!
@chewylewy17144 жыл бұрын
“Get it nice and slimy” *BREATHING INTENSIFIES*
@frtard4 жыл бұрын
*GRUNT" GOOD THING I GREASED IT
@BushCampingTools3 жыл бұрын
Quick question, (at 18:38) how did you calculate the attractive forces would be greater to the steel than between the poles at that gap distance? Did u do this simply by paper calculation knowing the field strengths or with some prior experimentation? Sorry for the dumb question.
@fusedglass015 жыл бұрын
Any luck on finishing this thing? Perhaps I just overlooked it. I'd love to see what it does with sea water running through it.
@jpendersen12945 жыл бұрын
Looking forward to part 3!!!
@ozne_23585 жыл бұрын
So do I
@mhenhawke5093 Жыл бұрын
I found myself really drawn to this channel, the more i watched , the more i was pulled in. Like a moth to a flame. The magnitude was over whelming, you now have a new subscriber.
@utubewillyman5 жыл бұрын
17:29 Why do I get the impression that he's trying to bolt it down before it becomes sentient and eats every magnet in sight?
@Curious425 Жыл бұрын
I recall a pattern you can arrange several magnates, that make the set one sided. They use it in particle eccelorstors. Could you test the Flux density and consistency of this configuration as well, and compare it the these? Thanks.
@android612426 жыл бұрын
I just want to say thank you for making these fantastic videos. You are by far the best channel on this platform. You are knowledgeable, thorough, and precise. Can't wait for the next one!
@TechIngredients6 жыл бұрын
You're welcome! It's in the can.
@lunakid125 жыл бұрын
@@TechIngredients What happened to the follow-up? Did we just miss it somehow?
@Kaylem134 жыл бұрын
I'm glad people mess about and share interesting facts, science and entertainment rather than watching mind numbing TV. Thanks man.
@gilbertvelez47566 жыл бұрын
Dude, I've been deriving the EMF equation for ever and you've enlightened me. Correct me if I'm wrong, I'm pretty new at this, but doesn't that configuration resemble an air gap at the moment of flux, even displaying the fringe factor where the fields meet (@ "air gap"). That makes so much sense being the energy is stored is within the gap. So what you seem to have made is a static E core to focus your magnetic field. Nice! I can think of at least 5 applications for that magnetic circuit off the top of my head. Definitely getting a thumbs up and I'm subscribing. Can't wait to see what else you've got going on.
@toms.39774 жыл бұрын
I agree with a previous poster. You are a very good speaker. No hubris or hubbub. Love the science!
@ChimeraPrecision6 жыл бұрын
the pucker factor on insertion is off the charts
@Basement-Science6 жыл бұрын
definitely.
@MarkLawsonY3K6 жыл бұрын
Isn't that a lot of trauma to the N52 magnets? Losing control of the monster is never a good idea, say me of a 1000 pinches. How could we ease the "snap"? BTW thanks for the explainations.
@electronash6 жыл бұрын
I was imagining his thumb getting caught between the mag and the perspex. :o It could quite easily have happened there. Rather him than me. lol
@wellnix536 жыл бұрын
I just didn't understand the comments about the magnet flipping which seems impossible by observation.
@ddd2286 жыл бұрын
"Excuse me,professor,can you tell me what the fuck is going here?"
@TheJoktan Жыл бұрын
Awesome! Very enlightening, thought out, and explained so even a child can grasp the theory behind this important project ...Thank you
@bsrcat15 жыл бұрын
Dude, I love your videos. I don't know your background but you're a good teacher. Teaching has to do with being able to explain information in a way that others can understand it and I think you do a really good job with that. Personally I just like all your experiments. I wish I had Surplus time and money that I could invest in just saying what if.
@ahmedshinwari5 жыл бұрын
Thank you sir for educating us on how the concept of magnetic lines being taken into consideration. That representation of magnets behavior based upon the magnetic-lines is very clarifying.
@JohnsonLobster2 жыл бұрын
And years later, nothing came out of it...
@tyson941929 күн бұрын
He’s a clickbaiter!!
@powerbuilder0510 Жыл бұрын
where do you get magnets this strong from? been on the lookout for a while now for a project. gonna turn a 10hp 2 pole motor into a permanent magnet alternator by replacing the steel core rotor with a 2 pole magnet to generate a rotating magnetic field and produce electricity.
@lank_asif6 жыл бұрын
This channel is unbelievable! Thank you for posting the quality videos that you do.
@TechIngredients6 жыл бұрын
You're welcome!
@Undergroundgrows6 жыл бұрын
I second this whole heartedly, Im looking forward to more!
@1of400Elite Жыл бұрын
I have watched and learned so much from you... Grandmaster of Science is the terminology I used to describe you to others... Thank you
@iIiWARHEADiIi5 жыл бұрын
Why not to call video: Magnetohydrodynamics -part 2: strong magnets? It would be easy to find all videos from one series.
@OverNine9ousend5 жыл бұрын
This!
@jaidenvperry30795 жыл бұрын
I mean, they're both in his "magnets" playlist
@iIiWARHEADiIi5 жыл бұрын
@@jaidenvperry3079 found them. But google usually shows on the right side next video with the same name. If videos have different names, user will have to go to authors list and check. All videos looks good, but they are randomly made :-(
@malectric2 жыл бұрын
Sort of a large disk drive voice coil magnet arrangement. What amazed me was that the magnets didn't break when they slammed together inside the assembly. Obviously not necessary in this case but maybe some thin padding on the end of each magnet might have been a useful safety feature? Can't wait to see what you're going to do with it.
@TechIngredients2 жыл бұрын
We are working on that very thing.
@jethrowbowdeen3 жыл бұрын
Great video bossman, its not every day that you can find technical thinkers like your self that can mentally see things on a complex and extremely detailed manner that most couldn't even fathom. Awesome videos 👍
@notlandyn76772 жыл бұрын
3:40 stainless "steel" is usually magnetic... I know that some types of stainless are not and I know it has to do with their structure (orientation of the iron in the structure) but Im curious is there a common type of stainless that is just known to be a non-magnetic stainless, or do you just take a magnet with you and check all the stainless bolts?
@TechIngredients2 жыл бұрын
18-8 and the other 300 stainless steel alloys are the most common and are very weakly magnetic.
@notlandyn76772 жыл бұрын
@@TechIngredients cool, thank you Your Channel is awesome BTW. I haven't found a video that isn't interesting and insightful yet
@sshuggi6 жыл бұрын
Love the content that you and other science KZbinrs are putting out. If you don't mind me asking, what industries did you work in to learn the myriad of things on your channel, or is it mostly self-taught?
@TechIngredients6 жыл бұрын
Just about every one you can think of except the fashion industry.
@spanky44466 жыл бұрын
Tech Ingredients what degrees did you get, if any? Im 21 and trying to decide which direction to go in education wise.
@teresashinkansen94026 жыл бұрын
Spanky444 Get a degree in something you have passion and like doing. So many people chase the money and end up having a dull life without even reaching its financial goals they wanted.
@spanky44466 жыл бұрын
Teresa Shinkansen true. I guess what I'm mostly concerned about is getting a degree is something that I'll end up hating in 10 years
@zachburke89066 жыл бұрын
Spanky444 that’s always a concern, no matter what degree you choose. I spent a lot of my high school years learning about subjects I enjoyed. I’ve probably got through the majority of them, most of them I decided against even tho they first appeared to be something I enjoyed. If whatever you think you want to do is something you can learn and experience at home I suggest spending some time doing that. It will greatly increase your chances of being happy with your choice.
@pinthunters99612 жыл бұрын
3:06 so if the fields can't cross (you should never try to cross any streams anyway), does that mean the fields also have an alternating north-south charge? and how does that work? how do the fields change orientation as they move from north to south?
@TechIngredients2 жыл бұрын
They don't cross, nor do they alternate. Field lines are an intellectual construct that help us visualize some of their properties. They don't actually exist.
@Freeknickers245 жыл бұрын
Where's that follow up video? It's been over a year!
@nandobarreto23 жыл бұрын
2 years now, and nothing :(
@WaqarAhmadA2 жыл бұрын
And 4 years now, still nothing :(
@Garnish4Zombies2 жыл бұрын
if it wasn't for the analogies I'd be lost. Promiscuous field lines! 100,000 thanks, T.I.! My ability to understand theory is dependant on my ability to visualise a process or structure, just a handful of well chosen words helps unlock a wealth of understanding for me.
@theroguetomato53625 жыл бұрын
Where's the follow-up video?
@Encyclopediaofbrilliantshoot6 жыл бұрын
man why is this channel so underrated?? this is one of the best channels on the interweb
@TechIngredients6 жыл бұрын
We're not under rated, we just have low exposure at this time. Please subscribe and spread the word. Thanks!
@Sepp20095 жыл бұрын
so where can I find the follow up video where you use that magnet apparatus?
@spudpud-T674 жыл бұрын
Still waiting for the rail gun.
@cubalibre8135 Жыл бұрын
Yeah, you really remind me of my grade 13 physics/algebra/calculus/functions and finite maths teacher. He instilled wonder in me exactly the same way you do. You are brilliant in the way you walk thru ALL of the steps, explaining in not only detal, but with different analogies to ensure the method gets across to as many people as possible. Fantastic work ! You have spectacular insight into how people learn and I'd say you're the best teacher I've EVER come across sir !
@TechIngredients Жыл бұрын
Wow, thanks!
@cubalibre8135 Жыл бұрын
@@TechIngredients WELL deserved !!
@dhy53425 жыл бұрын
It's been one year since this video and I can't find any followup?
@waltergrimm71615 жыл бұрын
Hi, grear stuff, looking forward to part 2 with ways how it us used
@LFOD74915 жыл бұрын
Dear fellow, you are truly amazing! Many thanks for your awesome videos. I wish more YT creators would adopt your clear and concise demonstration and narration style.
@stevenV576 жыл бұрын
This subject has a lot of attraction.
@lorditsprobingtime66686 жыл бұрын
It's all down to his "magnetic" personality lol.
@MarkLawsonY3K6 жыл бұрын
sometimes you hear a joke and it hits you just at the right time so that it starts a giggle fit you can't stop. Not that funny but close. thanks.
Is there a maximum theoretical efficiency to these types of generators or is it only limited by the magnetic field strength?
@TechIngredients6 жыл бұрын
I'm sure there is, but the big hump that must first be crossed is the avoidance of electrolysis. It takes a lot of energy to tear apart the oxygen and hydrogen in a water molecule. Expelling this gas out of the generator unused, is costly. The trick is keeping an individual MHD cell at or below 1.2V of potential. Controlling the field, the velocity and possibly resorting to parallel cells operating in series are potential solutions.
@candykanefpv5 жыл бұрын
"The forces here can break fingers" except it's more like exploding your hand as if it were a tomato.
@sirplantain5 жыл бұрын
I haven't read through the comments so apologies if someone has already mentioned this; how would the magnet flip when there's a sheet of plastic above the magnet? Or is it just something said due to 'muscle memory' (previous experiments where magnets have flipped have been disastrous, etc)?
@TechIngredients5 жыл бұрын
If they remain intact then I agree, they won't flip. The key word is, if.
@sirplantain5 жыл бұрын
@@TechIngredients Thank you for responding. Has that ever happened to you? A magnet be damaged but then reform? I'm new to watching your videos - if you have a video of something like that happening, could you send me a link please :)
@TechIngredients5 жыл бұрын
When the magnets are contained within a channel, but not locked down, they can fragment and pieces can go just about anywhere or if they remain in the channel, then they can jam.
@nickparkin85275 жыл бұрын
" I need my non-magnetic wood bar"
@lumpyfishgravy6 жыл бұрын
I worked in a UK magnet factory for a summer in the late 80s. Neodymium was just coming in. I heard stories of broken fingers assembling filter grids for food processing. One time I was moving a neodymium based magnet around on a pallet truck. When I hoisted the assembly, the truck came with! That was through about an inch of soft pine making up the pallet. I had to jump on it to get it off. It was an interesting summer!
@RVAIndex6 жыл бұрын
FIRST! As is stated in half the comments in every one of your videos: This is by far one of the most informative, substance packed, and serious channels in youtube. You'll get a lot of subscribers in time. Preferably soon.
@rre91216 жыл бұрын
MVHiltunen dang it
@JagAgemo4 жыл бұрын
69th 😏👌
@robertl42 жыл бұрын
I have been working with and studying wind generators and such , this seems to have helped answer some questions and clearified some answers I have had . And of course many more to come
@gentleandkind6 жыл бұрын
Another great video. Please consider linking to your other channel/other videos in this series in the description of your video. Lots of people will click through to your other videos.
@TechIngredients6 жыл бұрын
Thank you! That's a good idea.
@chemicallust772 жыл бұрын
Those magnets are no joke...when I was a teenager, I used to tear down old IBM server drives with 12" - 14" platters in them and they had massive neo magnets in them...surprised I didn't lose a couple of fingers...lol
@anchorbait66626 жыл бұрын
My butt is puckered up soo tight right now. Geesh those magnets are thoroughly terrifying and awe inspiring.
@avael24513 жыл бұрын
Little bit late to this one but have you tried using any of these magnets in proton magnetometer or nuclear magnetic resonance? The small gap between two neodymium magnets is commonly used in the $20-100k benchtop NMR models.
@TechIngredients3 жыл бұрын
I haven't, but the principle is streight forward.
@avael24513 жыл бұрын
@@TechIngredients I've noticed there's a lack of information on it outside of acadamic resources, and much of that is based on more advanced magnetic resonance techniques than just aquiring CW signal, free induction decay, or a chemical shift specturm. There's a large number of papers and books published in the 70s and 80s particularly by organic chemists who due to financial constraints at the time built their own fourier transformer NMR spectrometers using quadrature detection and other techniques common to amateur radio yet not so much in the modern engineering world. I don't have a signal generator or spectrum analyzer so I can't conduct any magnetic resonance experiments until I either build or buy those peices of equipment. It seems pretty straightforward to do a demonstration of it and the existing resources, especially on youtube, either involve superconducting magnets used in organic chemistry research or are of poor quality. I've been dying to see a decent demo of it.
@LJCyrus15 жыл бұрын
Anyone else have a moment of Bob Ross nostalgia/déjà vu when he started applying the grease.
@MarkBTomlinson6 жыл бұрын
Pure joy watching this and I did laugh out loud each time the Mantrap snapped those magnets in place, I feel your fear. Thank you!
@bomber789635 жыл бұрын
So how and when can I signup for the Tech Ingredients graduate school?? This is seriously so interesting
@CIA_Alien Жыл бұрын
I have always been infatuated with magnets especially electromagnetic superinduction. There is so much you can do with magnets. High impulse gravitational wave generators have really caught my latest interest! Really looking forward to you finished project.
@rayniac2115 жыл бұрын
It's been almost a year and no follow up :(
@dean980525 жыл бұрын
You missed it kzbin.info/www/bejne/i2nQn6WFYsyAbtU
@lunakid125 жыл бұрын
@@dean98052 That's not the follow-up, that's an unrelated video about a completely different setup & procedure.
@SeaUsername5 жыл бұрын
i cant find the follow up either !
@John-1003 жыл бұрын
since we are talking magnets i got an idea for you, a Linear Permeant Magnet Mass Driver, the magnets are arranged such that they retract or brake away from the barrel as the projectile reaches set points along the acceleration path, so that the magnets do not hinder the forward velocity of the projectile. The magnets will operate on a trigger mechanism that are spring loaded such that they spring away very fast thus removing their influence on the projectile as it pass the magnet.
@toobmaniac4 жыл бұрын
Ooops, i need glasses !! Thought the title said " Extreme Midgets " lmao !!
@randomsnow65104 жыл бұрын
I am a very tall midget
@imark77777772 жыл бұрын
A while back I repurposed some neodymium magnets out of a hard drive with some standoffs to make a cassette tape eraser for microcassettes. I wonder how good this magnetic contraption would be at erasing a cassette?
@joohop6 жыл бұрын
Good Work Earthling , You Are Getting Close
@ExtantFrodo25 жыл бұрын
I know this is way off topic, but would it be possible to use neodymium magnets in dentures to keep them forced apart - pressed against the gums? I'm very curious to see if it would work, but only if the repulsive force would even theoretically be enough. I haven't been able to locate neodymium bar magnets that weren't magnetized along the short axis in order to test the push effect with any incidence of attraction getting in the mix (as teeth also move side to side when grinding).
@TechIngredients5 жыл бұрын
Yep, that's a little outside the usual envlope, but that is where just about every innovation originates. There are too challenges as I see it. The least is the susceptibility of neodymium to corrosion, the magnetswould have to be well protected. More problematic is the geometricly increasing repulsion. With your jaws far apart, the retaining force will be at it's lowest level, but you might find it difficult to approximate your teeth in order to chew. Also, strong magnets in your mouth would be a hazard if any feromagnetic objects got to close to your head.
@ExtantFrodo25 жыл бұрын
@@TechIngredients Plastic spoons only (you could always do that "spoon on cheek trick HAHA) . Yeah, I'd thought of the geometrically increasing repulsion and don't really know how much of a problem that would be. They'd probably need to be well engineered for each person's circumstances. For me perhaps a short upper plate magnet and a long lower plate magnet would travel more in parallel to the force lines to provide a more uniform push against the opposing plates. On the other note, I'd expect that being embedded in the acrylic it would not be subject corrosion. Thoughts? BTW, thank you for replying. Your videos are awesome!
@riccardocastelli32185 жыл бұрын
Part 3, please?
@BushCampingTools3 жыл бұрын
BTW did you make another video for the follow up, I couldn't find it?
@tomjones91376 жыл бұрын
"Good thing I greased it!"...I've been there brother.
@timwegman57765 жыл бұрын
LMAO
@leifnevener32134 жыл бұрын
Get the butter
@eeyorezeyore92154 жыл бұрын
I need MORE BUTTER!
@garychandler42966 жыл бұрын
Fascinating, and I finally know why door catch magnets have two steel plates beside them!
@roadkillscjim5 жыл бұрын
Love the over kill jig to load the mags, I got a couple 4" X 2" X 1" N52's...terrifying to hold one of them much less get them within a mile of each other :-)
@AKAKiddo4 жыл бұрын
It's R&D not mass production.
@frtard4 жыл бұрын
There's no such thing as overkill with this sort of stuff
@SnowingNapalm4 жыл бұрын
So 4x600lb neomidium magnetic feilds 2400lb magnetic feild output? Also when you're talking saturation of the iron connected to the magnet feilds for redirection i veiw it as a catalyst to the stored energy in the magnet simply being spread out like a rivers flow not being pinched causing rapids instead less constrainded by the volume of iron to store energy or voulome of water in
@nicholasjohnson100115 жыл бұрын
I'm so jealous of this guy's life... all I've ever wanted in life was to invent and play with science!
@jh99215 жыл бұрын
Then get smart
@JDLeeArt5 жыл бұрын
...err get economically free and fortunate. I won't make a judgement on your intelligence.
@JR.M.S2 жыл бұрын
I’ve enjoyed this channels videos for about the last two years. This video made me truly aware about the “Second law of thermodynamics”. With no malice intent 😊
@anchorbait66626 жыл бұрын
That was amazing. I dare someone to thumbs down this video. We will find you and tickle you without mercy until you retract you're wicked deed. Cheers :)
@ollieb98756 жыл бұрын
Any modestly subscribed channel will pick up some downvotes, luckily, KZbin counts either as "engagement" so it's not necessarily a bad thing .. it can also mean a bunch of other things, like the channel is popular and it shows up in more random people's feeds. Potentially more people that just aren't interested in, or using KZbin for science type of things, you know so they thumbs down just to get more of what they want, curated by the KZbin gremlins. Meh 🙃😀👍
@anchorbait66626 жыл бұрын
@@ollieb9875 yeah I have noticed that. Smaller channels with tight follows, like under 150k subs, they get ridiculously high ratios. But then when the channel gets more popular I see the up to down votes falling off a bit. I'm guessing that's just because of what you said. More randoms getting the video in their feeds or people finding links to it.
@gamernick15335 жыл бұрын
Every video I watch blows my mind and leads me down a rabbit hole of understanding gaps that need to be plugged. As a teacher I sometimes struggle to understand why my students can't keep up with the most basic concepts.. videos at the level of tech ingredients keeps me grounded ;)
@TechIngredients5 жыл бұрын
Thanks!
@gamernick15335 жыл бұрын
@@TechIngredients No, thank you! :)
@adriansaninja5 жыл бұрын
Did he just say rail gun project?!
@anpham5255 жыл бұрын
yes, he did
@timothyandrewnielsen5 жыл бұрын
Don't promote this video until it's over. No sharing. I don't want it taken down.
@ScarletFlames14 жыл бұрын
@Markus Patients At that period of time KZbin had a "bug" (read: badly disguised lie that blew up in their face) and has been demonetizing entire channels due to their AI catching any content related to guns. A couple months before that it was a different word that got caught by the AI. A couple months after, still same issue, but different word each time.
@robertjoseph48372 жыл бұрын
Julius Sumner Miller addicted me to the study of the phyical law of the universe. your videos just pump the the thrill of industrial physics experimentation back into me. Go Well, Work Safely. As long as we question gods mechina, we know we are alive.
@joeMopar4125 жыл бұрын
You had me at "Railgun project"...
@bbelcher43555 жыл бұрын
Yeah Joe that's what sucked me in too. Then he tells us....Well, he didn't really, but he did indicate it would be some time....hopefully before hell freezes over
@Hellsong896 жыл бұрын
Is there any good sources on learning how to control magnetic fields? Is it even possible to have magnet with only north pole, pushing another with north pole, with out field effecting surrounding area and other magnets any meaningful way? What materials are able to block magnetic fields?
@TechIngredients6 жыл бұрын
The magnetic field origenates from the spin of the electrons in the magnet. These are aligned when the magnet is produced to create a macroscopic field. There is no such thing as a monopole that only has one pole with out it's oposite. The field lines have to follow a closed loop.
@lucastseh47096 жыл бұрын
Magnets, man, How do they work?
@DasIllu6 жыл бұрын
Just fine.
@ElizabethGreene6 жыл бұрын
… By aligning the spin of electrons. Putting that to a beat exceeds my musical abilities.
@MysticalDork6 жыл бұрын
*mumbles* something-something-special relativity.
@rummy986 жыл бұрын
I'm pretty sure this channel doesn't attract many Juggalos lol.
@codetech55986 жыл бұрын
ask Ken Wheeler
@lezlezman18433 жыл бұрын
5:56 "...constructing a little magnetic yoke." No, thanks. I don't want all my eggs pointing north! [groans]
@RyanHeaney426 жыл бұрын
"Those are forces!"
@ThomSteff15 жыл бұрын
Thanks for your great work. What is that water tank in the box?
@MrRolnicek6 жыл бұрын
Speaking of powerful magnetic fields, I don't suppose you can get your hands on some Rebco superconductors, can you?
@williamkaukler92024 жыл бұрын
This is 2 years old...where is the next part of the build? Would like to see liquid metal moving. I recently have a project working with such pulse currents, z-pinch, high speed switches etc. and found you were looking at liquid metal unlike others.
@jdlives89926 жыл бұрын
End of the tip where the balls are. Hehe.
@SixTough6 жыл бұрын
Nice
@Nevir2025 жыл бұрын
Wait, after all this, did he never do anything with it? It’s been almost a year.
@TechIngredients5 жыл бұрын
I'm very busy, but slowly the projects involving that magnet are moving forward.
@MrAlbinopapa5 жыл бұрын
Was wondering the same, glad to see a quick response. Very interesting videos, I especially liked the speakers made from "trash" concept, might actually have to try it myself.
@MindKontrolleProject Жыл бұрын
Cool... what would you estimate the speed (if measured) of the magnetic attraction you had during the insertion of the magnets into the yoke?
@fun_ghoul6 жыл бұрын
Homeboy needs to moisturize.
@GregJoshuaW Жыл бұрын
God I am just DELIGHTED that this level of content is still available out here.
@designworksdw19496 жыл бұрын
Camera work is nauseating.
@tonyhallen10622 жыл бұрын
is the magnetic field of a magnet made up of discreet entities referred to as lines, or do lines represent an average stregth of a homogeneous magnetic field at an arbitrary point?
@TechIngredients2 жыл бұрын
They are imaginary constructs that help us visualize the field interaction and its strength.
@brentcairns39005 жыл бұрын
How the yoke design translate into a disk configuration? I am trying to maximised the magnetic pull of an Axial flux permanent magnet generator, for a wind turbine. Using a 40x20x10 N52 magnets, I assume the disk where the magnets are fixed, needs to match the thickness of the magnet, namely 10mm. The perimeter of the yoke to be the same, at 10mm & the gap between around the same?
@TechIngredients5 жыл бұрын
I can't address the gaps in your design, but the thickness of the steel should be at least equal to the thickness of those magnets.
@victoryfirst2878 Жыл бұрын
I am just amazed at the strength of the magnetic box you made Tech Ingredients. Look forward to see more great things from you soon !!!!!!!!
@WildRapier2 жыл бұрын
I've worked with those magnets during a pilot program at a wastewater plant for magnetite ballast recovery. They are finger smashers. I'm surprised you were able to get them together without annihilating each other. I saw the remnants of 2 that someone got a little too curious with. Watch your fingers, phones, computers, TV screens..........oh and any credit/debit card. Not sure if they can wipe a chipped card. It was a few years before chipped cards.