With all the surfaces being flat, seems like you could quickly dry it with a window squeegee.
@oliverp73756 ай бұрын
and no risk of scratching the clear coat cause it doesn't have one
@peterdevita78607 ай бұрын
Now crazy Kyle can drive a clean truck back through the snow again.
@Notfiveo07 ай бұрын
Spray it with WD40. 🤣😂
@metalmike5706 ай бұрын
@@Notfiveo0 Well now, did he say if they ever put wax on it?
@diegon933227 ай бұрын
he single handedly wash that truck. impressive
@metalmike5706 ай бұрын
Geez Louise!
@Saberwing.6 ай бұрын
Lmao
@h8GW6 ай бұрын
As long as he keeps his good arm away from the power frunk
@metalmike5706 ай бұрын
@@h8GW Yep cause the other one can't get stuck there. 🤔And he could use someone to lend him a hand once in awhile!
@bazanime7 ай бұрын
I'll just say that cleaning your car after getting it quite dirty is very satisfying and therapeutic. It's great to see a nice fresh new vehicle. Then you go get it dirty again, rinse and repeat. At the very least between major washes, it's good to wipe clean the safety-related parts like the licence plates, lights, and cameras.
@RayNLA7 ай бұрын
Per Sandy Munro’s team. That piece near the caliper is suspected to aid in small overlap crash safety.
@jamesray90097 ай бұрын
as a former truck driver and a Cybertruck fan, I really wanna see what the chrome guys could do to it .. I have brought in some really REALLY bad company trucks before when I first started I would have my tractor detailed...Ya, I want a Mirror polished CyberBEAST with some old school KC highlighters on top sitting on Thornbirds .. Now I wanna see what one with a set of black bull bars (not horns) looks like on it
@jeffc68326 ай бұрын
DIY Detail KZbin channel is doing a Cybertruck detailing series, and they have a specific ceramic coating for metal. The prep was interesting as they had to do multiple passes with their panel prep spray in order to get it fully clean before coating. They specifically described to never use abrasives on it (like Barkeeper's Friend) because it will create an uneven finish on the stainless. The factory brushed finish was done with orbital sanders and that finish will be hard to duplicate until someone figures out what abrasives and process are used by the factory.
@d21mike7 ай бұрын
Based on your early recommendations for using Windex on stainless steal finger prints etc., I used it to get bugs off the front of my CT after a 330 mile (one way) trip from SOCAL to Monterey, CA and back. I just sprayed it heavily all over the front. Then used a soft cloth to easy wipe it off. Also, cleaned the big front windshield with it. Seems to be easy solution for me.
@davidlabelle39047 ай бұрын
Love that you keep on stanless, because my plan is to keep it original until i'm tired of the fridge look 😄
@Billyhime7 ай бұрын
Been using Simple Green since I first saw you use it in one of your first videos. Love it
@metalmike5706 ай бұрын
When I was in the Army we used Simple Green.
@momatedise7 ай бұрын
I'd say that the streaks on the frunk are silicone based, I work with sealing and bonding different pieces together and I've seen this happen when an area is contaminated with silicone. Most deodorants and such have silicone in them, but it can also be from some process in the factory. The only way to get it out is to wipe it down with IPA and a paper towel, wipe in one direction only and switch to a new towel each wipe, then you can test with a water film again and see if its gone. Repeat if necessary
@JohnFabrega7 ай бұрын
Took delivery of my CT in Jacksonville about 24 hours after yours. They pretty much admitted that they had virtually no training on prepping the trucks much less a seven stage process. Hopefully they will be able to address it for our trucks and going forward.
@Crunch_dGH6 ай бұрын
So..., PPF b4 taking delivery? Tesla can invoke digital color as well as subcontractors, right? Any flat yellows to help recall my old '56 'Vette? Not just for bugs, but to reflect heat away? Any parts that can be left bare to retain some of that Starship feel?
@TheQ1U1I1N1C1E6 ай бұрын
they definitely do not, ceramic spray wax and deliver...
@Bobbie-KaPanzies7 ай бұрын
Kyle I’ve been an avid fan of your channel for 8 months, love the content. Colten did an amazing job getting your CyberTruck all nice and spoiffy‼️ Colten really explains all the different products and methods he employed to get that baby back to spec. Curious about your ccomment that the cyber can’t off-road like the Rivian. Would love to see you do a Cyber Rivian challenge ‼️
@ThomasPatti5 ай бұрын
Question, 🙋🏽♂️ are you still using the bar keeps friend soft scrub or are you using the liquid form?
@kapteinsnute6 ай бұрын
Strangely satisfying watching someone wash their car
@DarkbaseTTV6 ай бұрын
Love the dynamic between the two of you. Great questions asked by the camera man and generally a cool video production!
@Noisy_Cricket7 ай бұрын
Been looking forward to this for awhile!
@mpow14047 ай бұрын
Coleton, Thanks for your informative and helpful content on how to keep Teslas looking nice. I have a 2023 S Plaid in black with cream interior. Your tips help me keep my Plaid looking good. Kyle, Thanks for all the great content. I plan to copy your wheel and tire choice: 20 x 10.5 Martian wheels, square set up with 295 Michelin 4S. But everything was on sale and now seems to be sold out. Question: do they plan on restocking?
@matthewpickron91032 ай бұрын
There is this product called NEVER DULL that is used in boat stainless for little spot checks. It’s great
@kennethogden87457 ай бұрын
Great Video... Please have more car care videos with Colton
@fcv19677 ай бұрын
I remember back in 2019 thinking it'd be cool to own a Cybertruck because you could just take it to a regular carwash and not have to worry about the brushes marring the finish. Now it turns out they will be harder to maintain than a normal painted car. The assumption back then was that a Cybertruck would never rust or scratch from anything of course.
@JohnFabrega6 ай бұрын
Actually the other CT owners in town and I decided to use car washes. Never did that with my MY or M3. On balance my CT may be clean more frequently than the others😊
@starshipdriver85366 ай бұрын
27:00 It’s easier to get rust dust off your cybertruck than a painted vehicle.
@retro11206 ай бұрын
Of course you can take it through a carwash, what are you saying?
@fcv19676 ай бұрын
@@retro1120 It will rust and scratch, apparently from what I've seen on news feeds etc
@JohnFabrega6 ай бұрын
@@fcv1967 apparently you've only read the click bait headlines not the thorough discussions.
@scrumpti0us7 ай бұрын
Can you use gasoline instead of soap? 1. The DeLorean owners manual specifies good ole gasoline as a choice of solvent. 2. Gasoline is very very strong so i think all that minor stains can be dissolved. Once you are done with cleaning what if you coat it with a thin layer of vegetable oil just like a cast iron pan would haha. It may help from developing a patina or stains
@jimmybobhere5 ай бұрын
Ha ha ha! Spend around $100,000 for an electric Cybertruck and wash it with gasoline! Sounds hypocritical to me.
@mini2nut677 ай бұрын
My Ryobi electric leaf blower does an excellent job of removing water after a wash.
@gstevens69487 ай бұрын
😂😂
@TesLatino6 ай бұрын
On March 13, I had the warning on my Cybertruck of the "tonneau cover used too many times. Wait before using again." Then on March 14 it stopped working altogether. Once I got back to Florida, Tesla service had to realign the tonneau cover twice in order to fixe it. It hasn't stopped working since they fixed it. I think it was just misaligned from the factory. Waiting to see if it fails again.
@LaOwlett6 ай бұрын
Think of rust like a mold. My kitchen sick never had any rust, until one day I left something rusty in it. Had I not sanded it out, it would eventually rust a hole. Bare stainless steel is only rust resistant until it comes into contact with something already rusting, like iron particles. The cybertruck (bare) is more vulnerable to contact rust.
@alexzahnd26427 ай бұрын
The ought extra piece is NOT a mud scrapper (at 3:40 in) but most likely part of the safety system once you had a frontal crash to crack the front wheel rim so that that wheel is NOT penetrating into the passenger cabin, thus keeping passengers safe.
@fieldlab46 ай бұрын
I would try finishing with jojoba oil. Environmenally safe. Could make a big difference in stain resistance. Food grade silicone. even carnuba or syntheic waxes, or ceramic finish could be good. Detilers will have it sorted out pretty fast and there will be some $100 special product.
@piemanklp7 ай бұрын
I'd love to see a video on different stainless sealers and protective layers a la "Everbrite ProtectaClear". Those guys come to mind because they're selling a kit specifically for CT. There's gotta be some sort of option out there for folks who want to maintain the raw look with minimal upkeep.
@jeffs60907 ай бұрын
Hopefully when you wrap it, you tint the front side windows too. I would also suggest a color (possibly matte colored) ppf vs a vinyl wrap.
@OtterFlash7 ай бұрын
24:50 talking about how hot the hood gets, how long until there is a video of frying an egg on it?
@bluescreen31165 ай бұрын
that could be a feature! interestingly someone posted the data to compare the cybertruck stainless with painted teslas. the results were 106f for stainless, 144f for solid black, 140f for midnight silver, 107f for white.
@feszty7 ай бұрын
A wrap on these trucks seems to be a must.
@darwinboor13007 ай бұрын
Awwwww that felt good! Now it's time for a Colorado mud bath. Perhaps a few laps around the local dirt track after a good rain or a heavy snow.
@tazeat7 ай бұрын
The original "shake and bake" is what the lead car does to disrupt the air to the following car to prevent them from drafting and launching themselves around to pass on the final lap. Shake off the follow car and bake toward the finish line keeping the lead.
@Greg-om2hb7 ай бұрын
MUNRO spotted that “mud scraper” in their first look under the CT video and surmised it’s there to help the truck pass the NHTSA frontal offset crash test. Its job is to prevent the front wheel from entering the passenger compartment like a battering ram, either by breaking the rim and deflating the tire, or by breaking it off the spindle and directing the wheel outward in the event of a crash.
@Freylock7 ай бұрын
Thanks for this video im trying to track the best way to handle this truck till I take delivery. I was looking at your amazon list but I didn't see the turbo nozzle listed? which one specifically is used in this video?
@JRP37 ай бұрын
ProtectaClear after BKF seems like a good option.
@Hyper-Reality6 ай бұрын
I think the CT is far more resistant to road salt than people think. I also think it looks beautiful when it's dirty.
@jakgats14116 ай бұрын
49:26 thats why its called stainLESS steel and not stain proof steel. It stains less than normal steel.
@mvpsportscardsmore23126 ай бұрын
Kyle, what truck you like more. The Hummer ev launch or Tesla Cybertruck?
@robertmaxwell35485 ай бұрын
What happens in Salt air environment! Rust out in a Year?
@aguzman2227 ай бұрын
Why am I watching this? 😂😂😂😂😂
@Crunch_dGH6 ай бұрын
So..., PPF b4 taking delivery? Tesla can invoke digital color as well as subcontractors, right? Any flat yellows to help recall my old '56 'Vette? PPF not just for bugs, but to reflect heat away? Any parts that might be left bare to retain some of that Starship feel?
@R3dL1ght55 ай бұрын
Cleaned mine with the foam cannon and a microfiber dry, pretty easy but the wrap goes on next week 😅
@jamescardelli42544 ай бұрын
The funny thing is I am seeing images lifted from this video circulating on social media making fun of the CT because one died after going through an automatic car wash as if Colton had anything to do with that lol.
@Chunkylover123133 ай бұрын
You had the charge port open and a charger plugged in while cleaning? Isn't that a big no-no?
@matthewpickron91032 ай бұрын
Do not hand buff with bar keepers friend. Just scratched my cybertruck. Get a random orbital buffer. Worth it
@OutofSpecDetailing2 ай бұрын
I’ve never scratched the truck doing by hand 🤔
@nickolashaustein6 ай бұрын
Have you tried dawn dish soap for cleaning the truck. I know professional window cleaners that use it as their primary window cleaner. It might work for the stainless as well.
@billh38607 ай бұрын
Ooo... all without a glove on your hand..! (i've been using simple green for years now, but it sure extracts the oils from the skin!)
@SFzip7 ай бұрын
"get the mitt out again Colten"😂
@metalmike5706 ай бұрын
The small hand mitt?
@matthewpickron91032 ай бұрын
Also it seems like after I polished it with barkeepers then the spots came back harder and stronger.
@jihangaban7 ай бұрын
can you really charge the car while washing? Genuine question.
@MartinGalway7 ай бұрын
I've had my Tesla since 2013 and frequently charge it in heavy rain. It was a weird feeling at first to know you're dealing with 400V etc. - but never had any issue and no-one has ever been shocked. I would say it is OK to wash it while it's charging
@jihangaban7 ай бұрын
@@MartinGalway dripping water is fine, but water pressure still ok? i didnt see it but colton might've sprayed on the charging port.
@wjksea6 ай бұрын
If this were high grade stainless there wouldn’t be a discussion about stains etc. The only change over time would be micro scratches cutting against the original brushed metal in varied directions. Like a 70 year old stainless mixing bowel thats metal doesn’t look a year old. It’s apparent the cyber truck is a low grade stainless steel.
@MartinGalway7 ай бұрын
What is the PSI on your water jet? I'm thinking of buying one NVM I think I found out by looking in your Amazon store listings. 1600 😊
@benjaminvazquez6 ай бұрын
I just saw the movie 6 times in 3 days and I will continue watching the movie on theaters, I really love it!!!❤❤❤
@benban18637 ай бұрын
I couldn’t help notice that you had the beast still plugged in while putting foam on it.
@missingpiece20717 ай бұрын
you need an overhead spray arm like they have at car washes
@agordon1177 ай бұрын
So I looked up the rotating cone tip that you used here, and I am a little confused. The reviews are saying that the cone tips are 0 degree jets that rotate into a cone. Is this something that you only used because cybertruck has no paint? Or are these safe to use on painted vehicles as well? I also don't see it listed in the amazon list.
@loscanty6 ай бұрын
Yea this guy studied this not exactly when Elon first announced the truck but he's passionate with this
@bwheatley17 ай бұрын
very satisfying asmr up in here
@harleym65556 ай бұрын
@18:19 Charging and washing the cyber beast is wild
@torben7776 ай бұрын
Was the SS not supposed to require less cleaning and maintenance?
@BenJohnsonMD7 ай бұрын
Kyle, get a canvas bed liner so you can leave the tonneau open except maybe when parked for security. It should solve most of the efficiency loss. I get mine in June
@Greg-om2hb7 ай бұрын
Paint is a very effective coating. Especially if it’s applied at the factory.
@PeterparkerSlaps6 ай бұрын
There’s a post on facebook using this video thumbnail saying the truck shut down after wash lol
@JackOLanternBob5 ай бұрын
Got a link to the telescoping mop you used?
@FullSimDriving7 ай бұрын
Kyle, watch out, a better presenter is nearly here, well done Coulton
@yvesst-jacques39897 ай бұрын
You could take a look at DIY Detail metal coating to protect the stainless steel, they just release a video about it 😉
@OutofSpecDetailing7 ай бұрын
Ordered. And will be testing!
@jeffpapp17 ай бұрын
They were talking about the thing at 13:51 on Munro, probably for crashes to help sheer things off quickly. kzbin.info/www/bejne/p5OQpomJbqutb5Isi=OoYPA6f0zCMueAZA&t=474
@intelligentcomputing7 ай бұрын
Try nano-ceramic coating for metal (not the same as ceramic coating for plastic / paint)
@user-to2rf1rj5v7 ай бұрын
3:12 thanks for confirming that the "7 stage sanding" stuff was nonsense all along Kyle! There's just NO way they're doing this, at the SC's or the factory.
@brianbode127 ай бұрын
That weird piece in with the front wheel was looked at by Sandy Monroe on one of there break down videos either the underbody or suspension
@larrysorenson47895 ай бұрын
Two spotted recently. One white, one red.
@emanuellycabrera68596 ай бұрын
My buying simple green by the buckets now!
@randyshanofsky99037 ай бұрын
What are "D.A. marks" that you guys mentioned?
@moki123g7 ай бұрын
DA stands for Dual Action. He is talking about a random orbit DA sander. I guess the factory is using DA sanders to get the finish on the truck. They leave concentric swirls.
@dervonwilder96957 ай бұрын
Colten, what kind of rolling detail stool is that, does it also have lockable casters?
@malsawmhluakhiangte46107 ай бұрын
Nice truck ❤
@43lk6 ай бұрын
What about opening the bed after wash?
@user-to2rf1rj5v7 ай бұрын
17:03 those wheel well liners aren't made of carpet. They're a polyester fiber composite.
@Thrice-er6ry7 ай бұрын
Colon you is so handsome!
@PA30Crewchief7 ай бұрын
What waterless cleaner do you recommend?
@rory-red7 ай бұрын
WD-40 is the best thing to clean Stainless steel
@OutofSpecDetailing7 ай бұрын
Not on the CT unfortunately
@lebronthegamechanger88087 ай бұрын
Awesome video
@Curryolla7 ай бұрын
I'm curious how TarX and IronX plays with the stainless steel.
@heyfrancie7 ай бұрын
Another scrubadubdub asmr video from Coleton woohoo!
@edwardszane7 ай бұрын
Well done!
@jakenygren27987 ай бұрын
Curious about the Everbrite stainless coatings. It would be interesting to see a video on that
@CarlosThomas7 ай бұрын
That is what I have for my Cybertruck.
@jakenygren27987 ай бұрын
@@CarlosThomas in your experience how does it look and how is it holding up so far?
@CarlosThomas7 ай бұрын
Still sitting in a box. I have washed it once. The next time I wash it, I will then follow there instructions and barkeeper it, etc., then apply it. Then let it sit for 4 days. Just need to find the right aim to do it.
@malsawmhluakhiangte46107 ай бұрын
Can you drive with only one hand .is it difficult to drive
@larrysorenson47895 ай бұрын
Tesla instructs owners to remove bugs an bird poop off the stainless immediately. I wonder when Tesla will begin clear wrapping them at the factory?
@nealpatel55567 ай бұрын
I wonder how long the tires will last
@robnation24757 ай бұрын
Reminds me of the HON 700 Series🤔
@MrAgility8887 ай бұрын
9:30 What dilution ratio did you use for the carpro reset?
@myycomment6 ай бұрын
how many memory photos of family can fit on this
@MH-Tesla7 ай бұрын
Imagine, Tommy's Express car wash does this in under a minute.
@richardthomas15317 ай бұрын
This is one long commercial. The Black Model is shiny.
@laurencel.79807 ай бұрын
why do you say Rivian is better off road?
@KyleConner7 ай бұрын
Because it’s much smaller, has much more suspension articulation, and is built with off-road as a main design target with extra skid plates available from the factory etc