Teslong NTG500 / H Digital Borescope First Use Video Manual

This is the video manual for the Teslong NTG500/H borescopes. Watch this video to understand how to operate a Teslong NTG500/H - rigid or flexible - model firearm inspection camera. With an innovative close-focusing camera, this Teslong digital bore scope will help you inspect the inside of your gun barrel. This is a great tool to evaluate cleanliness, throat erosion, tool marks, rifling wear, chamber damage and fouling. Assess your cleaning regimen or diagnose firearm problems to SAVE time and money!
Buy an NTG500 here: teslong.com/collections/borescopes/products/ntg500-45-inch-flexible-rifle-borescope-with-5-inch-ips-screen
Buy an NTG500H here: teslong.com/collections/borescopes/products/ntg500h-rigid-rifle-borescope-with-5-inch-ips-screen
Table Of Contents - Skip ahead to whichever subject might best answer your questions!
0:00 - Intro
0:52 - The Monitor
1:21 - Assembly
1:38 - Startup
2:17 - Probes & Mirrors
3:25 - Capturing Content
3:39 - Viewing & Exporting Content
4:27 - Settings
4:49 - Cleaning
Disclaimer:
Under no circumstances will the KZbin channel Teslong USA, or its parent company Teslong Technology, be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Teslong USA or a third party. In no event shall Teslong USA be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Teslong USA, it cannot guarantee against improper use or unauthorized modifications of this information. Teslong USA assumes no liability for property damage or injury incurred due to any of the information contained in this video. Use this information at your own risk. Teslong USA recommends safe practices when performing any do-it-yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Teslong USA, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Teslong USA.

[@adrianbuckley8922]

I just received my rigid borescope but the ringlight doesn't work???? All instructions followed correctly? Any advice please

[@teslongusa]

If you are still having issues with your borescope, please contact our customer service department - 877.899.8809 or [e-mail] - and they can troubleshoot the problem or get you a replacement asap.

[@roberthancock7055]

will this fit a 204 Ruger barrel?

[@teslongusa]

I wouldn't recommend it. In theory it should because our probes usually measure about 0.196 dia., however because of tolerance stack up over the length of the barrel and the potential for there being carbon or lead build up in the barrel, I don't recommend it. The fit will be tight and it will get tighter the farther you go, the last thing we want is for it to get stuck in there. We do have a 0.15" (3.9mm) probe that will fit, but it does not have the side-view option, at least yet - so it will only look forward. We are working on that for all the 0.17 and 0.20 caliber fans out there, but it isn't ready yet.