Test Review NEW MILWAUKEE M18 FMTIW2F12 FUEL MID-TORQUE IMPACT WRENCH WITH FRICTION RING.

And if you want a new personalized phone cover, order it here: www.makephonecase.com/
Ideal size to performance ratio.
M18 FMTIW2F12-502X M18 FMTIW2P12-502X (US modell): 2962-22 and 2962-20
I am pleasantly surprised. Ideal tool
Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque
Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces.
4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility.
Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.
Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening.
Tri-LEDs deliver high definition lighting to increase workspace visibility.
½″ square friction ring.
Reversible belt hook.
Integrates three MILWAUKEE®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite.
Flexible battery system: works with all MILWAUKEE® M18™ batteries.
PRODUCT SPECIFICATI
Article Number 4933478450, 4933478451
Battery pack capacity (Ah) 5.0
Battery type Li-ion
Impact rate (ipm) 0-900 / 0-2100 / 0-3100
Kit included 2 x M18 B5 Battery packs, M12-18 FC Charger, HD Box
Max. bolt diameter M22
Max. fastening torque (Nm) 745
Max. torque (Nm) 475 / 610 / 745 / 47
No load speed (rpm) 0-1200 / 0-1950 / 0-2575 / 0-1325
No. of batteries supplied 2
Nut-busting torque (Nm) 881
Supplied in HD Box HD Box
Tool reception ½″ square
Voltage (V) 18
Weight with battery pack (kg) 2.3

[@bestbuildpc]

What a monster machine! I can't believe it.

[@user-wf7kv8pi8k]

I used kzbin.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell

[@huwjones5879]

Nice to see this being used on rusty fasteners.

[@martylucas8557]

Why are you so surprised that it’s an ideal tool? Milwaukee make awesome tools. I recently bought the M18 Fuel Gen 2- 18 Gauge Brad Nailer. It’s an awesome tool. Same with the M18 Fuel Router, M12 23 Gauge Pin Nailer and M18 Random Orbit Sander. All very good tools!

[@wackey3455]

Great review i don't have to watch any more videos that's all I need to see

[@ievabalode2698]

Beast!!

[@robertfrate9738]

Hi, excellent video ty so much, this is what I want it’s worth the price and it’s all in one case, excellent performance, I’m ok with the price, you get what you pay for, the warranty is outstanding and Milwaukee stands behind their product I’ve always used Milwaukee and hilti, regards, Bob,

[@piotryczek9114]

Super tool Nr.1👍💪👍

[@mygoogle592]

MUSIC IS NOT ANNOYING WHATS SO EVER

[@tisoy909]

What are you demonstrating when loosening fasteners on the low power setting?

[@whatusername1234]

Today September 1st 2021, the Milwaukee mid torque + 5ah battery is selling for (219 +tax at home depot). [The dewalt mid torque + tool bag + 5ah + 3/8 dcf890 150 ft/lb impact wrench + charger dcb107 ] is selling for 250 +tax at Lowe's...

[@omcustoms2469]

Izskatās, ka kautko tas Milwaukee var atskrūvēt !

[@zoeylouise1990]

Hi do you have movement in the anvil at the end ? Sent mine off for repair and they’ve sent it back exactly the same

[@vanblue7317]

I think the Anvil is normal like that.

[@48retrop]

I don't recognize the model number on that tool. It looks totally different and it is packed in a black plastic box. I am guessing this comes from Europe or Asia, not the U.S.

[@Popajaja]

Question for Milwaukee specialists: I have a Milwaukee M18 FMTIW2F12 that has an interesting bug. When I press the switch, the machine spins and diode number 3 (third gear) lights up for a long time. Only when the diode turns off is it possible to change the direction of rotation and start again. In addition, the maximum speed (diode number 3) cannot be changed. In order for it to work at all and not to wait for diode number 3 to go out, I remove and put back the battery. That means to change the wheels on a car that has 5 screws, I have to remove and put back the battery 10 times. Once I press the switch, I must not stop until the job is done, otherwise there will be a long pause or re-inserting and removing the battery.

[@Popajaja]

Eureka! I repaired my impact wrench today. The error was in the brown main switch. To make it even more fun, I found the machine and the spare part in the trash. Maybe my experience will help someone who has similar problems? greetings from Switzerland

[@rasmuspoulsen2621]

i just watched a review where he torqued it to 500 pounds = 678 nm and it removed them much more easily than this idk why

[@wzazza]

Because this is real-world scenario, where all those 600+ Nm claims does not work. They work only for marketing purposes. That’s all. When you really need to get that rusted bolt out, they just can’t do that. My calculation is to divide claimed torque by 3, that will give real world torque. If they say tool can get 600Nm so that would be around 200Nm in reality.

[@DiligentDave1966]

How about the fact that the tool is greatly affected by the battery. They get the most power from a freshly charged battery with 21700 cells.

[@ericfinn7905]

Anyone know anything about the speed not changing. My ones stuck on 1 and a friends is stuck on 3. Any help much appreciated

[@Tomasdj1]

Be careful what tools you use. Cr-Mo vs Cr-V Impact Sockets Cr-Mo - Chrome Molybdenum is used for impact tools

[@matthiasjahn5761]

Ich hab den größten Bruder geiles Teil und da kommt noch ein kleiner Bruder dazu

[@Maks-Lirshin2004]

Hi, is it brushless tool?

[@RAP-mx9un]

Yes it is M18 Fuel tools are brushless

[@jayjohn9831]

Where yu get the black case? 🤔👍

[@kvn024]

Europe Milwauke

[@mehmetkuntas5643]

How much price this tools?

[@wackey3455]

Would it literally take any bolt of a car thanks

[@HeadsUP253]

Video owner didn’t reply to you with answers to your question! What a jackass of him seriously.. anyway im an mechanic master technician at audi and Porsche dealership, i use m18 fuel mid torque wrench everyday and it removes pretty much any bolts and nuts in a sedans and coupes even suvs but im not sure with trucks but i prefer high torque impact wrench for trucks

[@alexajanedelacruz4514]

how much

[@bobbyu8991]

Music c'mon