Darth Vader's Battle-Damaged Helmet from Obi-Wan Kenobi!

[@tested]

Learn more about FBFX’s work at www.fbfx.co.uk/

[@Lethgar_Smith]

In the first movie Vader wears his surcoat over the mantel. Then, in Empire and all other appearances, he wears it under the mantel. I've never seen this addressed before. Everyone seems to just pretend it was always worn under the mantel.

[@JacobHGamez]

Cool

[@hansolo374]

@@Lethgar_Smith I've always wondered why is it personal preference or most likely because it restricted movement in lightsaber duels and action scenes. Although they pulled it off in rogue one

[@SpicySteve-tz2so]

The amazing importance of using a "digital twin" is presented perfectly in this project. Thank you Adam for another fantastic video!

[@pballfin]

I can't even clearly express how much I love this discussion about the whole process. Seeing a hours long video on just how each detail is done and how it is dressed in to would be amazing, every minute of it! Thank you for this look in to Vader!

[@outlaw1179]

they dont do cool stuff like that anymore since George left lol

[@liquidbraino]

I saw another video that was just over an hour about one single scene in Episode III which only lasts one minute on film. An hour long documentary about one single minute from the movie.

[@pballfin]

@@liquidbraino That sounds like my kind of deep dive.

[@JockenN]

Perhaps a bit of the opposite direction, but the "Behind the Scenes" of the Lord of the Rings trilogy is astonishing to see, it's hours of this type of stuff and is nothing short of amazing. Back on topic what makes Adam so absolutely excellent at this type of content is that you can hear the admiration in his voice, which makes the people he talks to relax and just geek out. It's lovely to see!

[@martyguy8185]

The more the better!!!!! I could just watch this kinda stuff all day

[@Feintgames]

That scene when Vader says, "I'm not your failure, ObiWan. You didn't kill Anakin Skywalker...I did." with that sort of terrifying sadness followed by devilish glee in his voice, honestly, that's probably one of the best moments if not the best moment in all of the films. I was just so blown away by that episode and the emotion of it all. I read the description of the episode and thought, OK, we'll see. But yeah. I'm so glad these guys put in such hard work into the costume design and everything else. And Hayden killed it. He just owned the character in a way that wasn't possible before.

[@patrickbarnes9462]

That little smile on Vaders face as he said that....D8

[@SkaiCyan]

You shouldn't feel dumb for missing that painting on the face, imo. It's a really clever trick, it looks like it's just the lighting creating that difference.

[@EddyKorgo]

straight out of comics effect

[@cejaprime]

I didn’t notice until I bought a Black Series Vader and noticed it. I thought it was an error on the figure until I looked it up online. Mind blown! And now it’s hard to unsee it when I watch Return of the Jedi.

[@panamajack5972]

Imagine if the writers had this level of passion. Amazing work.

[@DanielGBenesScienceShows]

To be able to continually see fresh material and peaks behind the scenes of one of our favorite franchises that was first created in the 1970’s is just wonderful! Thank you Adam for these gems!

[@papahamdrew9962]

One of my favorite scenes in the show is when we see Vader’s mask split in live action. We saw it in rebels, when Ahsoka cut his mask open but we see clone wars Anakin (Matt Lanter) and he doesn’t look burnt, obviously because it’s a kids show. But in the kenobi show we see it in live action and we see Hayden Christensen burnt underneath, it was chilling and amazing to see. If I could have any Star Wars prop, I wouldn’t pick Yoda, or the Falcon or a lightsaber, I’d pick the split Vader helmet. Beautiful piece

[@robd1329]

That was crazy in Rebels and mind blowing in Obi Wan!

[@Nathan-bp8kg]

Yea, Vader's broken helmet is cool

[@David-nq8cv]

​​@@robd1329 also more symbolic, in Kenobi one half was shown on the helmet and in Rebels Ashoka managed to slice the other half but Luke was able to remove the helmet completely, like Obi-Wan and Ashoka can only bring Anakin back half way but Luke brought him back entirely to the light side again

[@robd1329]

@@David-nq8cv your right! Everything always happens in 3s!

[@chubby_artist]

I really really love these in depth Star Wars look ins

[@happyjohn1656]

Gotta wonder why Disney isn't doing any of these

[@AlphaMunky]

I love the cross between rogue one and a new hope design, with the hints of revenge of the sith. I can’t wait to get the hot toys figure of this suit

[@DiggitySlice]

There are differences?

[@AlphaMunky]

@@DiggitySlice it’s hard to tell with a black suit. But they’re very noticeable differences when you look close enough

[@southernvader]

@@DiggitySlice huge differences

[@Pantheragem]

When I built my life-sized Vader in 2005, I called him an Episode 3.5 Vader. He is mostly New Hope, but I really liked the chest box from RotS. So, that's the chest box he has. The rest of him is all New Hope, I did a weathered paint job and all.

[@AlphaMunky]

@@Pantheragem that sounds neat! Did the chest box light up? I’d love to get a Vader suit one day. Id probably go for rogue/new hope. But man I love slick symmetry with the ROTS version

[@dullahan7677]

From the time of my earliest memories, Darth Vader has always held a special place in my heart, as the original Kenner action figure was the first toy that I actually remember buying with my own money. In 1978, I was given 5$ by my grandfather(big bucks for the time), as a gift for my third birthday. I remember being overwhelmed by the seemingly infinite choices as I stood in the toy department of the local K-Mart. Overwhelmed, that is, until my gaze fell upon Darth Vader. At that moment, everything seemed to fall into place, and all of the other toys just fell away. The Sith Lord accompanied me on countless campaigns on numerous worlds, stretched far and wide across the universe. Whenever battle was joined, there you would find us, as we clashed with every faction you could conceivably find in the 1980s. Thundercats, the armies of Skeletor, Autobots, Decepticons, hell, even GIJoe and He-Man we're not immune to Vader's wrath. This gift was later made even more special, because my grandfather passed just a few short years afterward. I still have that beaten and battle worn Dark Lord sitting in an honored place on my shelf. The collectors and appraisers tell me that it's worthless, but to me, it is priceless.

[@lumbagoboi1649]

I was born a while after the original trilogy was made but one of my favorite toys was also a kenner Darth Vader. I believe I got it (and a lot of other kenner figures) from my uncle. That poor Vader already had no paint left and no cape when I got it and I still played with it all the time to the point where it's head finally popped off. Now after 2 childhoods my absolutely destroyed Vader also sits nicely on a shelf lol.

[@cameranerdsmedia]

This is a true honor to see the making of this helmet. Thank you! I enjoyed this episode more than I am able to express!

[@AutismusPrime69]

Then why only donate $1?

[@PettyPrinzeJr]

The fact that they even planned exactly where the creases are shows the level of detail and dedication to this suit. Insane.

[@Jezee213]

I love the respect that they gave. To the entire team, you guys nailed it! It's awe inspiring. It looked fantastic in the show on camera, everything.

[@Outland9000]

They really knocked it out the park with these costume props. They hold up superbly even under very close inspection.

[@zensational.]

I'd love to see this guy and his teams take on a modern version of Vader. Great to respect the classics, and I appreciate it - but this guy really cares about quality and attention to detail.

[@FreeMind4492]

I think that's the best looking Vader ever made, the helmet is absolutely GORGEOUS.

[@NathanielJamesProd]

I'm a 3D modeler and I'm creating designs for my original character outfits for certain story projects. Watching this, all the enthusiasm you guys have is really inspiring!

[@lfcbpro]

Just a side note, I love that Adam doesn't hide his hearing aid, it must be great for kids with hearing loss to see one of their heroes also have a hearing aid and be very very successful, good on you Adam.

[@KingZedusPrime2009TyrentKaiju]

Only nerds care about that

[@SahiPie]

@@KingZedusPrime2009TyrentKaijuAlmost as if that’s exactly the kind of demographic that follows Adam and his content innit?

[@SatansGreatestSoldier]

@@KingZedusPrime2009TyrentKaiju *sees other comments you left* yeah, you're so eDgY bro

[@KingZedusPrime2009TyrentKaiju]

@@SatansGreatestSoldier You fr thought you'd use the retarded SpongeBob capitalizing every other letter shit and think it was funny? Keep at it bud

[@failtolawl]

bro shut up lmao, stop latching on

[@Rebar77_real]

I love how the cheek/jaw features are referred to as whiskers! (12:40)

[@jerrodbroholm4338]

I feel like after watching him for so many years, particularly on Mythbusters, I've got a reasonable idea of how Adam "scales" to things in familiar with. That said, seeing him next to Vader... made Vader so much more real, and even MORE intimidating than before.

[@JaguarFiend]

Yes, however I want to say that the full suit may be displayed on a stand making him a bit taller than he would be standing on the ground. And Adam is about 5'11".

[@sundaynightdrunk]

@@JaguarFiend David Prowse, who did the in-costume work on the original Star Wars films, was 6'6" or 6'7", depending on the source. Vader's canonical height is 6'9", but Prowse wearing the boots and helmet was likely even taller. So the costume should be mounted that tall, but I agree that it might be mounted a bit higher here.

[@daankoelewijn5211]

Given I’m the exact same height as Adam I’m suprised because I thought Vader would be a lot taller (like 2.5m)

[@FEEDMEKITTENS]

If you have a chance to do it, check out Vader Immortal in VR. When Vader stomped right up to me I was almost shitting myself.

[@sundaynightdrunk]

@@FEEDMEKITTENS That's funny because I've played it back when it was first released on the original Quest headset. You're right, he's terrifying in VR. They presented him really well for the sort of crappy graphics at that time.

[@joermnyc]

I read that when Hayden first walked onto the set in the suit, everyone working on the project: a) wanted to be there, and b) were just stunned.

[@curlyboy1975]

Dave Prowse said he had a bit of movement in the original suit and it changed on each film to aid mobility but he couldn’t move or see in some directions and it would be easy to hit things behind as he had no real vision except in front, bet he would love this suit.

[@dralin350]

Insane I like the integration of the cradle for the lore. The crazy scifi tech is ever-so closer each day and we can make the tangible counterparts.

[@daved2352]

It occurred to me that the helmet being asymmetrical fits the lore too, because the helmet was a bespoke piece made for vader and humans aren't symmetrical

[@b.chuchlucious5471]

Nice to see Tim Roth breaking into FVFX and model making. J/K, good work fellas, top notch!

[@liamnevilleviolist1809]

9:45 - the silver cheek plate: also my favourite part about the helmet and I had NO idea that it was like that until this video. 10:22 - "I felt so dumb". Don't worry man, I'm sure more than 50%+ of the film's audience didn't know until these detailed behind-the-scenes videos were uploaded decades later!!!

[@azy6868]

I truly love listening to the depth of storytelling these creators manage to impart into these props. It's exactly the same as hearing a great author describe how they created their masterpiece. Every detail is laboured over, just like the opening paragraph of a book.

[@ChasingKillersMusic]

I'm fascinated by the asymmetry of Vader. That's incredible.

[@skullthekiid]

The suit by itself looks like it would come to life and move around already lol amazing work by the team behind it 👏

[@Trepidity]

greatest villain ever. the amount of care they take to this explains it all.

[@JakalairVG]

Wow, this is an amazing video! It made me smile the first half and then just shocked in the second half. I am reminded once again that no matter how complicated I think something is, it's way more complicated than that.

[@graywolfcarpentry564]

Wow thanks Adam and crew. So much info into the inside of Vaders costume construction. Satiated fan here. Still remember my first introduction of the original movie that I saw from reading Starlog magazine as a kid. Was waiting 1 1/2 years to get to see it when the picture opened. The artists rendering in that mag had me salivating in wonder.

[@sromer43]

Glad adam savage is living the best life and back enjoying cinema, sfx, cosmetics, and design.

[@ivanyiu102]

This is what we called 'professional' , the insightful dicussion on the helmet is probably the best star wars thing i ve seen online

[@blaineishere3851]

28:24 I assumed the orange of the eye was partially from a light inside the helmet. So, having it shut off from the damage really works imo

[@JohnH20111]

the eye lenses are actually red

[@CaribbeanLounger]

Man, the RPF is going to be LIT UP with the introduction of their magnetized structured helmet support system. I for one am glad because it will give me some new options for my ESB Vader!

[@maxsnts]

This is so weird to me because i'm not a model maker and somehow that was what i was thinking before they said it was magnets. I just thought that magnets would be a common thing to do. I actually got surprised by Adam's reaction to the solution.

[@AlasdairGR]

@@maxsnts Some methodologies in the maker/prop replica community become just kind of the standards and get taken as granted and the best technique for that particular item. Sometimes you don't think to look beyond that unless you have some cross-disciplinary experience or a really clever mind. And a new method that gets shared with the community always has this feeling of "Why the hell didn't we think of this before?! It's so obvious!"

[@CaribbeanLounger]

@@AlasdairGR Yep! I built my first TK (Stormtrooper) back in 2010. And went on to build my ESB Vader, ESB Fett, and now my Mando. I love how many improvements I've been able to make based on things that seem so obvious.

[@roblowrie1969]

Absolutely fascinating insight into the process of making an iconic film prop. Thank you. 👍🏻

[@NewMessage]

Impressive. Most impressive.

[@robertuchman6947]

Lol

[@edski24]

A series with Adam & associates taking about helmets would be pure gold. Who knew Vader was asymmetric!

[@SophiaAphrodite]

Cool to see Tim Roth getting into special effects.

[@TheBeerMando]

It's really cool that they solved the whole outer helmet blowing in the wind issue they had during the Cloud City Luke vs Vader scene with magnets

[@ggriffaw]

Excellent video. I would like to see more about the Clone Trooper suit and helmet shown in the background.

[@tested]

Stay tuned!

[@ggriffaw]

@@tested Great! Hopefully there will be some discussion of why some of the design changes were made. I'm sure some were to make it more wearable and allow the stunt performers to do their stunts.

[@RM_VFX]

I'm glad to see someone actually build a back section to the inner mask! It's always bugged me that in lore, it's supposed to be sealed like a space helmet, but the cowl and the facemask have always just been loosely fitted with open space under the bell. It's even similar to something I sketched out for my build, I may have to borrow from this design to combine with the classic reveal helmet since it's now in canon...

[@omaverick2870]

*I just realized about the silver eyes too. Damn. And I love the exploded helmet animation in zbrush. That would make a great display set in a glass dome jar, just like how some collectors create exloded human skull.*

[@brettro8210]

This is beautiful and amazing. I just wish they put this much effort into the script of Obiwan!

[@matthewhendy5785]

The asymmetry is genius.

[@juangrandefranco1297]

The amount of tedious and diligent work that went into the helmet only for them to decide "why not just hide all that wonderful detail in darkness?" Aside from Andor, Mandalorian, and most of the animated shows, Star Wars has been in a rough rough place. But I can always appreciate the hard work and talent that comes from these artists and designers. Unsung heroes man!

[@Shadoweclipse1386]

Wonderful video Adam! I was also really hoping that you'd ask them (or film it, if you DID ask them) about the 501st Clone armor behind you guys for the first half, since we never had physical clone armor until Obi-Wan!!!

[@karynbrunton3218]

10:03 I can’t unsee that now

[@randallsavage13]

Wow so so much really goes into making this work parts we never see in the movies and the attention to detail is amazing much respect

[@matthewxmeehan7189]

It’s incredible how every aspect of a film is truly just several cooks in their own kitchens eventually bringing all of their projects together for the final picture. Their work on this mask alone provided a crucial piece of one of the most emotional pieces of Star Wars media there is. Love this.

[@GregMedendorp]

So from what I've seen, the helmet from the end of episode 3 was made symmetrical and it didn't look right because it wasn't the Vader we knew from episode 4 that was asymmetrical. This helmet getting damaged would explain why in later episodes it was asymmetrical. Because it had to be replaced or repaired for episode 4.

[@DorifutoRabbit]

Another great behind the scenes detail and spotlighting the talented makers, thanks Adam

[@TheSuperspatz]

This is amazing workmanship and detail it brought a tear to my eye re-living how Anakin became Vader

[@TreyStylesPro]

Beautiful!!! Nothing like Vader

[@hotwheeltv1520]

Very lucky to have visited FBFX and meet with Grant and Andrew when they purchased one of their 3d scanners from me. Truly inspired by what these guys do... they are the best out there and this just demonstrates this fact!

[@davidburgess937]

Wow!! So much learned in this episode, an amazing story of artist.

[@luisbenitez1099]

THANKS FOR SHARE THE INFO ADAM

[@daved2352]

Adam casually pulling out a little flashlight and looking into it while chatting was very funny to me.

[@Grymgar]

The beauty of Lucas's storytelling is that he was able to weave the limitations of Vader's suit into the storyline itself. I feel that Vader is hobbled because of the bulk he is wearing.

[@andrewmurray1550]

and the fact he's more machine than man...remember Obiwan did slice BOTH legs off at the knees!

[@clone4211]

@@andrewmurray1550 And the other arm, can't forget about that.

[@Clownboy15]

Of course in the original continuity that’s exactly what happened. Palpatine had Vader weakened by putting him in this suit. None of the parts were the best. It kept him alive and functional but also in constant pain and agony.

[@gcm747]

Adam nailed it when he simply said ‘lasting power’. It sums the character up perfectly.

[@ACGreviews]

Love the 2 guys 14:30 and on. Like them all but for some reason those 2 guys seem just happy to be there

[@positronalpha]

So cool to see Tim Roth in his new job and identity as workshop supervisor.

[@christianalzmann4327]

Such a nice breakdown! Beautiful! Also very cool to see my artwork in there at 18:40.

[@kiwibryntoo]

Thanks

[@cccrroy757]

The chest respirator/box looks so much better without the visible straps like in the original trilogy movies. It looks more like it's plugged into him than just a box strapped on him. I liked how they showed how he was put together in the Obi Wan series. Everything is plugged into him instead of just being blinking boxes strapped to him. I also think they explained how that huge gaping open scar got on the top of his head. Seeing the helmet damage in detail like this makes you appreciate how bad of a strike that was from Obi Wan. Without that helmet half of Vaders head would have been cut off. Vader would totally be dead.

[@gabrielbarudi1399]

And ALL this work for a f... Epic scene!

[@NATOnova]

surprising amount of work put into this suit. impressive thanks for sharing

[@RM_VFX]

When my studio did the digital Vader Times Square billboard for Obi-Wan, I mentioned the alternating finish on the helmet facets. It's something no no one notices until it's missing, and it turns into a black mush. But it's something you learn when you do research for your own Vader helmet prop. The Rubies Deluxe helmets come with a glossy/matte finish actually molded into alternating panels, and their fiberglass helmets have the black/gunmetal paint scheme. You almost need a floating light rig to follow the head without that paint scheme to make the facets pop.

[@michaelr00ney]

The love of craft and attention to detail, balanced against the practical demands of use and cinematography, is demanding but inspiring.

[@rjc305]

Awesome video! Would never have known how much went into the making of that particular Darth Vader helmet. Very informative.

[@TheTankUK]

This is what I’ve been waiting for since I saw the series. So much information and detail makes this one of the best suits and helmets ever produced. I love the way you can see where the top half of the helmet connects with the bottom half. Tiny details make this an awesome piece of art. Well done 👍🏻 and thanks Adam for filming this so we all get to have a look at something we’ve been dreaming about for years!

[@jesusisgod2953]

Are you saved? Where will you go when you die? Heaven or hell? The Gospel, which means the Good News is the news that God Almighty, the Creator came in the flesh as Jesus Christ to take away the sin of the world. The one God is a trinity of the Father, the Son and the Holy Spirit. The Son came and laid down his own life to save ours. His sacrifice on the cross paid the price for our redemption with his own blood. On the third day he rose from dead and offers the gift of salvation and forgiveness to those that repent and trust in him. Although God's creation was created perfect, having no death, sickness and disease, the creation became corrupted through Adam and Eve in them disobeying God. In this rebellion the creation became fallen through the curse of sin and mankind became separated from God. This world is fallen, but God offers reconciliation to him through his provision at the cross. Ultimately God will restore his creation to perfection when he returns but those that reject his offer of redemption will remain condemned by their sins and go to hell. John 1:1,14 KJV In the beginning was the Word, and the Word was with God, and THE WORD WAS GOD. [14] And THE WORD WAS MADE FLESH, and dwelt among us, 1 John 3:8 KJV He that committeth sin is of the devil; for the devil sinneth from the beginning. For this purpose the Son of God was manifested, that he might destroy the works of the devil. Isaiah 9:6 KJV For unto us a child is born, unto us a son is given: and the government shall be upon his shoulder: and his name shall be called Wonderful, Counsellor, The mighty GOD, The everlasting Father, The Prince of Peace. John 1:10 He was in the world, and the world was made by him, and THE WORLD KNEW HIM NOT.

[@liamnevilleviolist1809]

9:45 - that silver cheek plate.... I wonder how many people noticed at the time. In my experience: first it was Threepio's silver leg, the second comes this silver cheek-plate. Perhaps there are some other silver parts we all haven't discovered yet? Hmmm.

[@itsmephil2255]

Come on, admit it, you wanted Darth Vader to move and scare the carp out of Adam 😂😂😂

[@bigorange2082]

This much love and dedication will always be better than CGI.

[@antwaynetube]

Nejad seems bothered that he wasn’t allowed to take the beautiful asymmetry out of the helmet. “Fixing it” would have been a travesty. I really appreciate the team's work to bring this perfection of an original trilogy looking Vader to the screen. Thanks for sharing, Adam.

[@truth__hurts]

Nejad is South Asian and part of the replacement population due to the dwindling native English birthrate. In about 100-200 years time, people like Nejad will be the majority of people working on these films, so you’ll have to get used to their proclivity for treating it just like another job and having no knowledge or history of how things are supposed to be.

[@Khronogi]

@@truth__hurts what

[@hiimchrisj]

They did that in ROTS and while you can look at that version of the helmet and know immediately that something just felt different about it, it wasn't something that really ruined the look for me, personally. I just looked at it and felt "Oh, well that's just what happens when you make the suit with modern techniques. I would've fine with them maintaining the symmetry of that version of the helmet into all of the modern versions but I guess there's something worth appreciating about maintaining that vintage feel and bringing things up to modern standards just from the technical side of things that the audience will never actually see.

[@Jan_Iedema]

@@truth__hurts the fuck you talking about.

[@Rikki442]

@@truth__hurts Are you on drugs? Or have you come off them? I can't tell which.

[@leemarsh3569]

Really enjoyed this video. Great to have an insight into the work involved

[@redman9pablo]

I have probably watched thousands of KZbin videos but this is in the Top 10 I have seen over the years - brilliant

[@peckenstein]

I would have loved to have known if someone at the FBFX shop got to wear the suit during construction to ensure elements were working with a real body inside, and if so how that person felt during the time they were in the suit. Awesome interviews!!!

[@donevans1884]

wow what a story , really fantastic video .

[@glyph2011]

Absolutely amazing work done by the team. The Vader scenes, with their work , stole the entire Obi Wan Show. 👍👍👍

[@Formally_VADER_76]

Most Impressive!! Kenobi version of Vader is my absolute favorite

[@randie_endik]

All these years.. I have never ever notice that silver paint. Just blew my mind off.. That's just genius.. Wow

[@rickytoddbotelho9555]

I met David Prowse twice. Once when I was a kid in Berkeley. After star wars came out in 77' or 78' Once at Fishman's warf in sf. In 2012 He was impressive. Most impressive 👏

[@stevedickson5853]

I've just watched him as a Minotaur in Doctor who with Jon Pertwee , he looked massive 💪

[@nikolasdove]

Wait a minute...how tf we gonna get that convo here between adam savage and hayden christensen. We need to see that full convo between them!

[@AAX1975]

This was absolutely fascinating to watch! Epic!

[@martyguy8185]

Love that flashlight Adam......it pops out at the best times to "inspect"!!!

[@stevelee4653]

awesome vader suit.. great work team!

[@panners125]

Makes me want to go and watch the episode again. Dedicated people do amazing things.

[@mauriciocubillos3041]

SO now we know what Tim Roth was doing in between takes of She_Hulk.... impressive... most impressive!!!

[@Lonewolf0840]

Gorgeous!!

[@PDYALL]

Oh that’s just freaking awesome thx for bringing us along to see and be a part of it

[@James_D.]

Magnificent work!

[@Star._.wars._edits]

This is amazing!

[@allenmacias273]

That is a beautiful Vader suit. Why does it look better in this video than the actual show? I’m a crazy or does anyone else agree?

[@geraldstiling3735]

I was waiting for Hadyn to jump off the podium and prank Adam😂

[@msmrx57]

This video deserves a LOVE button!

[@ryananthony4840]

Very good episode!

[@donierz]

This looks so Awesome!

[@pangrac1]

This is like a dream to see all this!!!!!!!!!!!!!!!!! 🤩

[@monty4336]

The audience knew in 1977, when Vader made his first appearance, he would become an iconic villain in film history.