Great episode! It will be interesting to see how the grain trucks keep up.
@beerenskiani16 сағат бұрын
correct me if im wrong but i think you can stiffen up those headers with the mouse buttons and at the field you can unlock them back again, great video as always!
@KederkFarms10 сағат бұрын
Thanks for the tip I'll check that out!
@kodabear_464 сағат бұрын
I know we have them on console I'm sure there's plenty on PC, but find some placeable ramp mods that you could toggle free mode/clip into the current ramps and give you the trucks a smoother approach angle.
@pitty09794 сағат бұрын
@kederk AD doesn’t like articulated tractors for grain carts. You may need to go the 9RT for Fendt 1100, pending how much HP you need. Currently having a break from the MP server until next year.
@ryan517414 сағат бұрын
Should’ve done one large one way loop for those small two tracks around land locked fields
@KederkFarms10 сағат бұрын
That likely would have worked better but there isn't really enough room to get two vehicles side by side down that road. I don't think it's going to be a huge problem but I guess we'll find out next episode... :)
@_Corsa15 сағат бұрын
Landscape in game that ramp or go into mods and get the ramp mod, can lengthen and extend it for less angle. If that fails I’d go into GE and terraform.
@MikeY-bx5hg7 сағат бұрын
custom moddings 9250s have longer auger works good with those 62ft headers
@KederkFarms6 сағат бұрын
Thanks, I might go for the Christmas theme if I start running into issues with the X9s
@claytonrondeau90287 сағат бұрын
When doing 24 lands does that mean by the end of the field the combine is driving almost the entire length of the field to get to the next row? If it does wouldn't it be more efficient to go in a spiral all the way to the centre?
@KederkFarms6 сағат бұрын
True enough, the benefit of lands mode is that the grain art can cut across the middle between the combines instead of having to drive around
@glennrobichaux749011 сағат бұрын
I'm using the mack that you had before with that trailer and it's doing fine. The wheelbase on the trucks are too long is where the problem is
@KederkFarms10 сағат бұрын
Yeah the previous mack trailer works great for Auto Drive it's just getting CP to unload into the double hopper that seems to be a problem with that specific trailer.
@glennrobichaux74909 сағат бұрын
@@KederkFarmsthe mack truck with the single hopper you are using now is working for me, it gets over that hump fine with autodrive
@bradyzoeller270813 сағат бұрын
How do you do the auto drive part where you connect the paths then bend them?
@KederkFarms10 сағат бұрын
Scroll the mouse wheel before you make the second click to connect it and it'll curve.
@bradyzoeller270810 сағат бұрын
@@KederkFarms ok thanks! By the way keep up the great work your videos are so relaxing to listen to and watch in the morning or getting ready for bed:
@deejayremmers466117 сағат бұрын
Could buy fertilizer trailer on third truck and use it just for that so sprayer don't always have to drive back to buy it
@KederkFarms10 сағат бұрын
That would be smart, just need to figure out how to get field side refilling setup with CP.
@benniebullock330117 сағат бұрын
Have you tried landscaping the terrain for a better angle for approach
@KederkFarms10 сағат бұрын
Unfortunately can't landscape the ramps. The real problem is the angle at the top of the ramp causing the connection point between the truck and trailer to become too steep.
@benniebullock33018 сағат бұрын
@@KederkFarms but you can landscape the ground over the ramp
@mikeduckett40 минут бұрын
I’m sure there is a short pipe option on that 379?
@productionfarming567818 сағат бұрын
Thank you for the video. I used your CP “grain cart” video to really speed up production for me. Thank you for that. I have two demco 1100 grain carts pulled by a new holland t9 and a JD 9rx. My problem is the new holland unloads at the truck and the 9rx will not. Any ideas?
@KederkFarms10 сағат бұрын
Unfortunately some mods just don't handle automation very well. I've noticed especially articulated tractors seem to be hit or miss.
@Bull-hauler3714 сағат бұрын
What hopper bottom are you using, and where can we get it?
@Bull-hauler3714 сағат бұрын
It stops following the combine when the auger goes back in