Testing The Cheapest Impact Driver Drill on AMAZON

[@TheCam5465]

I love how he’s testing a Chinese firework factory on a workbench with several fuel cans on it

[@bososz]

He has these cool accessories on the gas cans that actually prevents the vapour and liquid from coming out of the cans. You could actually light a match right next to it and nothing would happen.

[@denislostinlondon199]

And the moral of the story is: do not loan your tools to a Wranglerstar.

[@timreid9556]

Open carry...looking like a whole lot of Freedom there on the Homestead

[@firescoob999]

@@epicpoontime Thought the same . Including wearing fancy watches in a workshop environment around power tools and machinery .... Posing ?

[@timreid9556]

As the survivor of a home invasion I am armed in my pajamas. I carry a salt water folder swimming. I HAVE ZERO fear Cody is going to show up and shoot me.

[@mattgarcia440]

@@epicpoontime You obviously haven't seen his video of the coyote attacking his two dogs, where his Glock 26 was employed to defend his dogs and homestead successfully...

[@ronnie3044]

@@firescoob999 what is the point in getting a gun for self defense if your not going to keep it on you? Use some common sense here.

[@ttennebekim2325]

Looks comfortable.

[@thunderheads4103]

"Chinesium" lol. "Yep, that's Chinese Smoke"

[@noahm44]

LoL yes

[@startedtech]

Love that you're one of the very, very few (non-politics) KZbinrs who doesn't care if people get offended or what they think of you. Keep up the great videos.

[@neyoid]

Absolutely no one gets offended by power tools.

[@lawny4277]

@@neyoid Probably talking about the "Chinesium" and "Chinese Smoke"

[@noahm44]

@@neyoid That's also not what he said. It's in regards to what he says about Chinese products.

[@1012Mrjesse]

The thing is, that cheap tool definitely uses a brushed motor, while the dewalt most likely uses a brushless motor

[@toolreviewsandrestorations]

sNiiPeZ_03 that is correct.

[@HappyMadScientist]

Try running some of the huge timberlock screws though a 6x6. We use em with big oak beams when we are timber framing and the DeWalt drives em right in there.

[@highclasswhitetrash9027]

Right. My little 3 speed brushless has well over a million screws in its career, most of them 3/8" hilti steel structure self tappers.

[@jeffreymurdock8366]

Now you take the junk drill apart and see what gave out.

[@OvertonWindex]

Send it to AvE

[@aaronstorey9712]

@@OvertonWindex its not choochin right

[@Spyyyder1]

Release the shmoo !

[@viperstrike3827]

The brushes heated up and cracked and melted the brushholder out you can see it. It held up very well the speed control usually fails.

[@kennethromich1337]

i would like to see you do a dewalt vs ryobi impact drill driver

[@ArdenRoberts]

The ryobi 18v brushless isnt too bad

[@BONGONDORBASS]

I wanna see dewalt vs mastercraft

[@WildMountainGarage]

I saw the belt and didn't see a holster then saw the G26. It's good to see you carrying in your videos again! God bless you brother!

[@srjackson1611]

Last time I was this early Cody had fresh Lego hair.

[@matt30125]

"Chinese smoke" 😂😂😂 love it

[@GmKofHard]

I use NoCry pool tools and from the daily use on fixing vehicles they handle extremely well. The only issue i have is with the NoCry impact wrench is unable to break loose a extremely over torqued lug nut (dealer ships and auto repair stores do over tighten them way to often). But give it some time to work on it by doing burst it'll break it free. I wouldn't exactly blame the tool for that because it was not the tools fault it was over tightened. But from daily use so far it has handled extremely well. I am not disappointed with the products even if it is considered a cheap tool.

[@randomfishingguy5573]

I highly doubt the dewalt is the most expensive impact on amazon.

[@AFXGaming]

especially considering he said it was around 125 and they start at 250 in stores lol

[@David-yk4td]

The video is testing the cheapest not the most expensive

[@David-yk4td]

@@leviferrero6068 Sorry man. I was going off the video title lol Now seeing that, Of course DeWalt couldn't be. Cody does like him some DeWalt tho 👀

[@OvertonWindex]

@@AFXGaming with battery. Looks like the Makita is 179 though.

[@challengerking4358]

8:53

[@tobycussons188]

“Definitely smelt that Chinese smoke before “ 😂

[@zack6892]

What's the point in carrying a compact pistol with a shorter grip just to extend it all your doing is increasing the visibility. At this point you might as well move to the sub compact g19 platform as short barrel compact pistols are notorious for effecting the expansion on most self defense hollow point ammunition.

[@deejay45647]

U found a use for the crows foot I remember it being in one of your old videos of worthless tools ironically

[@Chris_R97]

why you testing a brushless motor impact and a brushed one together?

[@OvertonWindex]

Because they are the same tool. A better question would be, if all the specs matched... why test them? Why are you testing a yellow tool against a red tool!?

[@jondoe6618]

should of used a Allen. Cut the bend off. Those wont break.

[@radozeman]

I won't be to sure about that!

[@jondoe6618]

@@radozeman I would

[@killingtimeitself]

@@radozeman allen wrenches do happen to be made of s2 tool steel which as far as i know is impact resistant

[@AG.Floats]

He cut one with a side cutter in one video lol

[@killingtimeitself]

@@AG.Floats yep

[@JamieVauxnut1]

Surely the mafell impacter is the most expensive ... or festool , its definitely not that default

[@timenavigator9643]

God bless you & yours as well! Thanks for making us so proud out here In Nebraska, definitely Dewalt territory!

[@brycemcmillan8419]

Sooo when are we going to get the final video of the 20 part workbench series with the bench grinder and drill press??

[@TheUSAforever1]

My wife is the woodworker in our house. We went on her birthday and picked out a drill set for her. Spent money for quality tools and they have been great. Quality beats price always, buy once cry once.

[@judithkatz1918]

I am old enough to remember my dad coming home with a chip Japanese radio that hardly lasted a month. It was thrown away and he bought another one not bothering to even have it looked at. Guess what? It was a Sony. A company that's at the top of its field today but now is beginning to fall to other up and coming. Just wait. You are young enough to see the day when "chinese" products will top their respective fields. As long as north american companies outsource their production lines to off continent sources it'll come to pass

[@GeorgeLee85]

Thanks for your waise and experienced comment! However, one thing need to be noticed, that the Chinese consumes 80 percent of their own products nowadays, which means that even if Americans stop outsourcing their product to China, nothing will change.

[@DK-jd8bj]

Unfortunately the DeWalt is made in China also. So is Milwaukee. Makita is made in Japan. There aren't any American made drills to my knowledge. The difference is that DeWalt and Milwaukee are premium formerly American brands that have stricter controls on how the Chinese build tools for the American Market. The Chinese can build good stuff but their natural tendency is to build stuff as cheap as possible.

[@EETechs]

Apple and Samsung are the leaders today and Sony is a has been company that can't even make their own silicon chips cause they rely on AMD for the CPU and GPU in their new consoles.

[@ASliceofWoodWorkshop]

The Bauer from HF is about $60 and i like it. Works great at breaking bolts loose.

[@joshstory9627]

I too randomly keep my gun with me while messing with power tools.

[@AddisonGallamore]

Should try the Harbor Freight Bauer or Hercules impacts.

[@MyKonaRC]

Didn't know DeWalt was more expensive than Hilti or Metabo….

[@alanbarboza781]

MyKonaRC always go for Makita

[@MyKonaRC]

@@alanbarboza781 sorry, Milwaukee already stole my heart.

[@LOLKINGBABY]

@@MyKonaRC too bad their Chinese now. Some of their tools are nice though

[@alanbarboza781]

LOLKINGBABY yeah Makita I believe is made in Japan I’m not sure about all but I know some

[@LOLKINGBABY]

@@alanbarboza781 not everything unfortunately. They do have some made in China stuff, but they also have made in England, Germany, USA, among others which is pretty cool

[@RoxorPlox]

Hey Wranglerstar, if you had to pick just one company to buy/use power tools from would you choose Milwaukee or DeWalt?

[@DK-jd8bj]

Take a look at his videos it's all DeWalt. Of course a lot where given to him for free so I'm sure that influenced things

[@RoxorPlox]

@@DK-jd8bj appreciate your response. Ive noticed what he uses regularly in his videos, it's a combination of botth. I'm looking for Cody's perspective/opinion. I don't want to make assumptions.

[@waynemcclennan4226]

The Chinesium score of 5 to 1 is valuable information. Thanks 👍🏻

[@alexmartins9148]

Your drills are very impressive, you must be very proud.

[@JerradAdams]

how about two bottle jacks pressing against each other until one fails? You are onto something with these videos.

[@jasonnadeau1330]

The battery on the cheap one looks almost the same as the Dewalt. Are they interchangeable?

[@anthonypolsinelli1179]

Very unlikely. The batteries have a surprising amount of electronics in them.

[@toolreviewsandrestorations]

I have the Dewalt. It’s a great tool. I would much rather have one Dewalt than 5 chinesium tools. I’m sure that the nocry’s batteries would fail long before Dewalt.

[@OvertonWindex]

I've found that, though trying my best, I can only fit 1 in my hand at a time productively.

[@anthonyb2642]

Lowe’s sells the dewalt with a charger and one flex volt battery for $99...thanks Cody for the videos!..can’t say enough how much we all love them. Keep up the great work.

[@g00fysmiley]

I have the nocry got it on a sale in Amazon I want to say it was $40 with battery. Wanted one to throw in the truck and just to use on fasteners. For that duty it is fine, but otherwise the thing can't loosen a lugnut over 80lb so it's not going to be a pro grade option. Still has been nice to have and not worry about my Makita being stolen, if somebody stole it I would buy another for what that is worth.

[@that_bald_guy]

“Since there’s no problems on the homestead only solutions...” *gets a fat grinder out* you sir have a good sense of humour, i think i died a little when when you said that haha

[@Floatergang707]

Moore’s Tree climbing that’s definitely not a fat grinder, I’m sorry u have been deprived of tool education

[@sciencesold_]

The XR on the dewalt means its the brushless model, that thing isn't gonna fail until you heat the chuck or bearings up enough to cause it. the cheapo one is definetly not brushless, so the brushes are 100% destroyed and what was causing the sparking

[@AFXGaming]

the DeWalt is all I use at work, the tool itself won't break, only the bit or screw will, but honestly if I was not using it professionally, and just wanted one for home/personal use, the cheaper one may be a good deal

[@novabxnynova5381]

I have never broken a dewalt 20v. I thought I broke one when I dropped it off a scaffold, and it stopped working so I bought a new one, then one day picked up the old dewalt and it worked no problem. Just had a loose trigger probably from that drop. Easy fix

[@toreyweaver9708]

Hahaha the gas can lift test cracked me up 🤣🤣 great video as always ♥️♥️♥️

[@SinCityHoodENT]

Ur honestly my fav outside utuber

[@keegansullivan7432]

We call that smoke and burning wires PFM in my auto school... Pure freakin magic

[@burrr1047]

😂 That gas can lift test on the Nocry was hilarious and so was “O! That’s gonna be a problem!” Hahahahaha dying man.

[@bigDwood]

Awesome content Cody. It helps the average guy to make a choice. We all learn something.

[@70stastic]

Finally found a use for the Crow's Foot sockets I see. I never found a use for them other that torqueing the upper strut bolts on my Mustang.

[@wranglerstar]

Haha, the first time I've used one in the 20 years of carting them around,

[@OvertonWindex]

@@wranglerstar used them daily in maintenance on the A10 in the airforce.... so you're ready for that, at least.

[@wranglerstar]

You can believe I’m holding my breath for that

[@MrMadeinthe80s]

Now do Dewault vs Milwaukee Fuel with a titatnium 1/4 shank.

[@rannox0]

They're both team China... One just happens to be slapped together in the US.

[@TRX450RVlogger]

rannox0 No, actually it’s an American tool that is made in China, the difference in a DeWalt, Mikita and so on are just built The customers standards. Just because something is made in China don’t always make it bad, like i said they build it to our desired quality. now that other impact was obviously just a Chinese lowest quality made tool built to Chinese standards... which there really isn’t much quality there because no customers asked for it.

[@colingomez8949]

Cody your editing is getting so good.

[@lloyddahlen1141]

Thanks for sharing your info on the drivers 👍🇺🇸

[@TheSnakeman3]

Cody you always give us knowledge, wisdom and are pretty darn entertaining. I laughed pretty good on this one several times. Thanks.

[@sicdavid6292]

Did you see that clip of the 2 smugglers race over the new boarder wall/fence? They both cleared and landed with 90lb packs in under 9 seconds. Must be the Amazon tools they built it with.

[@intoxicatingmasculinity4866]

Two places where tools go to die: the back of the toolbox, and Wranglerstar's workshop.

[@yankeecantrell]

Problem is, the DCf887 impact from dewalt is also known for catching fire

[@outdoornmore7123]

Milwaukee vs. DeWalt impact drivers plz.

[@liamboyce9833]

You Kno what needs to happen now, DeWalt vs Makita impact driver

[@shadowsiren3058]

THE REASON WHY DEWALT WON THIS IS BECAUSE. The parts are American premium. Second it is brushless and you don’t get Chinese burnout. Third I love your channel because you compare!!

[@terryspooner128]

Cool test. I wonder what blew in the ChiCom Impact driver? It wouild be interesting to do a post mortem on it.

[@justmowing89]

It smells like Chinese smoke I've smelled that before

[@gwyatt6665]

You should do a video comparing modern corded electric impact guns vs the tried and true air powered impacts and see which one comes out on top. I’ve started to wonder in recent years if the new electric versions are on their way to replacing air powered.

[@gwyatt6665]

A 1/2” drive I think would be a common size relevant to lots of viewers from different trades and backgrounds as well as a typical homeowner shop

[@wstephens]

G26 FTW 👍

[@Devin82m]

DeWalt power tools are made in several countries, but one of them is China, so you could possibly have two Chinese made products. I prefer Makita, at least most of their products are still manufactured in Japan, some China, but still Japanese designed. Not that I'm even remotely an expert, but I know Japanese products, especially electronics, are some of the best offerings on the market and I've had amazing luck with Japanese products. Besides that, great video as usual. :-D

[@WDEndless]

How about a Dewalt vs Hilti?

[@mattmead5730]

The sweet spot for me is Ryobi. Budget tools for the DYIer. I have replaced a couple of them, but I have also pushed them beyond my expectation.

[@professionalbluebiker]

Your fibre grinder sounds like a f1 car anyone agree?

[@justind.laashley1220]

I use my 20 volt dewalt impact to remove lug nuts and I haven’t found a lugnut that has defeated the dewalt impact and there were some frozen lug nuts that bent my trusty 24” breaker bar that I used before I got the impact

[@benzmansl65amg]

Thanks Cody

[@bobbyruiz7124]

Love my dewalt impact

[@Eric-ew8jt]

0:23 THAT WAS EPIC WRANGLERSTAR

[@808chevykev]

I see he keeps the most important tool handy in the shop at all times like I do😉. You cant go wrong with an extra hammer and nails!

[@zack6892]

He should do a video like this with impact wrenches high end vs low end!

[@jackpaul7215]

And I believe that, that impact is made in the USA or at least there is a similar model made in the USA.

[@jacobking4106]

With global materials. Which means assembled in USA

[@daz2372]

Cody please give the Milwaukee m18 fuel 1inch high torque impact wrench a run for its money.

[@groverbundy899]

2:40 automatic subscription

[@EDC_Tactical]

Need to see a review of that Wavian gas can in the background! That with the non-epa nozzle could be a perfect can

[@anthonytompson4185]

For the impact gun, I guess the cheap one is not brushless. Cause of that the tool is not powerful. You can try WORX tool, they are made in China but strong and powerful, not expensive but with a really nice quality.

[@jacobschlais8351]

Absolutely love the video. You should put a milwaukee up against the dewalt. At my school we have both and the Milwaukee hits wayyyy harder than the dewalt.

[@Mixwell1983]

Walmarts hypertough impact is even cheaper at $40 for impact,battery and charger. I wana check it out but dont want to spend the money. Already have a ridgid and a bnd impact as a backup.

[@Colintetts]

Is it that dangerous in the US & A that you need to wear a gun when testing impact drivers ?

[@DK-jd8bj]

That's why it's not dangerous. Think about it.

[@turnersparadise8368]

He had it just in case he needed to put one of the test subjects out of its misery.

[@aidanfiala4417]

You should test next Milwaukee 1inch impact driver. That thing is absurd. I think it does something around 1500 foot pounds. Don’t quote me on that.

[@u842]

My husband and I really enjoy your videos. He'll ask, did you see Mr. Wranglers new video? Or I'll ask him. 😃 Sweetloaf is soooo adorable.

[@DragonBuilds]

As bad as these no name brands are, Black and Decker is far worse. It costs almost as much as other DIY focused brands like Ryobi yet it has horrible quality, no customer service, and is dangerous! My old black and decker drill caught fire with normal use so I bought a Milwaukee.

[@BrandonsBees]

I LOL'd at the hat over the ear protection. Thanks for the laughs, Mr. Cody.

[@manuelpadilla2292]

I like how he didn't use the dewalt till it smoked out

[@gearheadted5110]

Cody finding the breaking limit of tools so we don't have to. Fun and interesting as always, and another cool lighting effect. For cordless tools my philosophy is, buy the line of cordless tools you like, and fits your budget, so you have batteries that fit multiple tools. God bless you and yours. Cheers.

[@TSGEnt]

looks like all you may do is cry with the nocry. I'm a Dewalt guy myself. I've been known to have a couple Ryobi tools as well.

[@warrenmichael918]

instead of an instant death match, maybe try screwing 100 LOOONG lag screws into some oak lumber to see if the junk can even work like that before the kill shots ?

[@brutus1808]

Love dewalt tools I think the xr range of tools are the best but like everything people have preferances some dewalt some makita some milwaukee that's the top 3 if you buy any of them you will not be unimpressed with the quiltity but I use dewalt because I have the battery's and chargers so buying the tool without the battery and charger is the best way to save money

[@seeszm]

Cody’s work bench is going to have some serious wear by the time he gets it. Love your videos.

[@chowly]

seeszm **Jack’s

[@lauramagagnoli7750]

You should have put a shortened alen key in the middle that woulda worked better

[@norman3605]

You are enjoying these torture tests way too much. 😄

[@trevorholland7]

What if you cut a Allen wrench that fits perfectly in there do you think it would brake it

[@SirFrankoman]

Can you test Ryobi vs DeWalt? Ryobi has taken strides to be better quality and affordable.

[@mlow42]

I have helpers in the passenger seat, all the time. I use harbor freight tools only.

[@3r8mo]

Have same Dewalt impact. Love it ya get what you pay for

[@nickkepart834]

Thanks for the Laugh I really need this my friend is will be buried tomorrow

[@mapleenderson8541]

didnt we watch that some time ago already?

[@billlamm4688]

Awsome! Battery 'gauronteed' to out live the driver

[@DH-ry2ho]

Any progress on the workbench?

[@carsonrhodes7969]

What’s with the green light shining on the work bench area?