Testing the home accuracy of the XTool D1 Pro 20

[@phaleen]

I think your cameras fine. Your videos are very well done, honestly. Thanks again for taking your time to share your knowledge. I just got notification my xtool pro is being shipped. Long story, long wait, but im sure it will be worth it when it's finally set up.

[@TheClackShack]

I am really enjoying mine and making lots of cool stuff. Thanks for the compliments, I enjoy sharing what I learn.

[@slick11nick1]

WOW, Thanks. This is exactly the test I was hoping you would do. Thanks again. I did vote for Rustique Relics, great that it worked out. You are uploading quite a lot of videos, please make sure that you are also taking time for yourself. Since this is your "second job". Have a great one

[@TheClackShack]

I have been a workaholic for my entire life. I started the channel after I let all of my part time jobs go. Believe it or not, making the videos is very relaxing.

[@lisagreen5198]

Today is a new day and this is a new Maymay Clack Attack!

[@TheClackShack]

She is always picking on me...lol

[@Dancopymus]

Hello friend; first of all, thanks for the demonstration. I have had my xTOOL D1 Pro for a little over a week; and for getting better acquainted, in the Laser tab I always use "Current Position" so I would like to know if it is possible to use "Homing" in that function or is it only in Absolute Coordinates. And how can I configure Homing on this D1 Pro machine. Thanks

[@TheClackShack]

You can use it both ways, I switch based on the burn. Odd shaped objects or 1 time burns, current position works well. For cutting or multiple objects, I use absolute. Homing isn't required if you are running current position.

[@Dancopymus]

Thanks

[@uhstube74]

I m new to laser machine and in market to use for making pop up cards from cardstock paper and some miniature wood pieces. I have Cricut maker machine. 1) does it work on cardstock paper making intricate cuts or too strong for it? 2) other tool air assist or honeycomb is optional in such application? like to try first and gradually like to add accessory. 3) what is longevity of this machine? I read mixed review on amazon 4)Looking at xtool d1 pro 10w or 20w . I see diff of 500 $ between them. Should I go with 20w ? Does 10W cut more intricate cuts then 20w? Quick reply (if u can) will be great

[@TheClackShack]

Yes, most 20 watt lasers will cut card stock or paper with ease. You do need to get something with air assist and a honeycomb when cutting paper. Without it, there is a risk of fire.

[@uhstube74]

@@TheClackShack Thank you for quick reply... Are you suggesting to go with xtool d1 20W or xtool d1 10W based on ur experience ? Thinking between xTool D1 Pro 10W with all accessories (rotary kit, honeycomb, air assist)in 980$ Vs xTool D1 Pro 20W with rotary kit , PRYMOL Air Assist like (55 to 60$),Silicone Sheet (10$) around 1270-1300$ Can I use other company accessory like air assist or honeycomb with xtool cutter? I m trying to optimize my expense.

[@TheClackShack]

Whatever you go with, I would look at 20 watts. There are other accessories that you can use with the machine. Comgrow makes aftermarket things for it@@uhstube74

[@flanikent]

Buddy you are just the person I need to talk to! Think way back when you had an xtool D1 10w original :) Did you have accuracy issues when you used you very accurate templates I cant get mine to line up with my jigs after a day of engraving and a shut down. The next day I have to realign everything it maddening PLEASE HELP!!

[@TheClackShack]

Slow down your home speed or start pushing it home by hand. Unless you have timing issues it should work.

[@flanikent]

@TheClackShack ok and we are talking about absolute coordinates

[@TheClackShack]

@@flanikent that’s what I run

[@flanikent]

thank you for your help I actually had a firmware update i was unaware of@@TheClackShack

[@farmwife99]

A new day and a new Maymay attack!!! ♥️

[@TheClackShack]

A good day too..lol

[@doen.8724]

Great video as always. I noticed your cable management... I cable-tied the cables on my D1 Pro how the instructions said to do, but when you home the machine, the cable bunches up in the back. Will have to change my set up now.

[@TheClackShack]

I am sure the bends in the cables will have to be trained a bit. That is what I did to mine.

[@JohnWayne-jl4ku]

do you use the d1 pro software Creative Space . Why I ask you because having problems with lightburn . Thank you John 😃

[@TheClackShack]

I only use it for udates. I have been using laserbox for tumblers. I make and burn everything in lightburn. I have a video on getting lightburn going that might help.

[@arcadius1970]

ty

[@davidsohlstrom6977]

I've watched this video when it first came out. I believe you said that you had slowed down the homing speed. How did you go about doing that I have looked at ever setting I could find and can not for the life of me get my homing speed slowed down. Dave

[@TheClackShack]

In lightburn, on the move tab. The setting is called framing speed but is used for homing also in lightburn

[@RobertJohnsonLasers]

This may have been mentioned or not, but the limit switches are optical, one side is an emitter and other side is receiver, thus the u shape of the sensor. It uses infrared light to hit the sensor, and the little arm on the moving part blocks the beam, and says STOP! Lol, Laser printers have them. Now these CAN get dirty, and will need to be cleaned.

[@TheClackShack]

Thanks

[@longshotin05]

Thank you for this, my d1 pro kept tripping a limit switch after the job was done on the way to home, I'm guessing it's dirty. I'll try when I get home

[@aroberts5359]

Thank you for all you do to supply us with the information. I have a question if you can give me any light on it I would appreciate it. How much detail do you lose between the 20w and the 10w Xtool? I purchased a 20w pro and I am still waiting on it to ship but I have heard that it is noticeable difference.

[@TheClackShack]

I plan to test them side by side, its on my to-do list

[@aroberts5359]

They would be a good video. There is alot of talk going around right now on the detail capabilities of the 20w. In the Facebook group there are people asking about whether or not they should cancel their orders and get 10w instead. Thank you for your videos and information. I am learning alot from them so I can be prepared for my laser.

[@steveferguson1232]

I have the original d1 and I home it and get same exact accuracy. I slowed my move speed down so it won’t bang or slam into rails. I never manually move it anymore. Have my honeycomb with material set right at 0/0. When I hit fire button, it’s dead on corner of board. I can put a piece of scrap anywhere and machine will go right to it without limit switches

[@TheClackShack]

Cool, I have had good luck with mine with those small adjustments as well. I still frame as a precaution. I guess it isn’t just a coincidence. I still like using the return to function for multiple items.

[@kartz9762]

It’s a new day and a new Maymay attack

[@TheClackShack]

So I have heard...

[@jankesalez]

Did you install limit switches? Sorry if i missed that.

[@TheClackShack]

The pro comes with them

[@jankesalez]

@@TheClackShack That sucks so they cant be added to the non pro.

[@d_warerepairandrestore4594]

I got a D1 pro and one thing I can’t find online is when I push home it lines up to the top left but the sensing tab starts in between the limit switches. So if I start a cut and the laser moves left the sensor goes off. Is there a way to adjust the starting home position?

[@TheClackShack]

Sounds like you are not using absolute coordinates

[@donbanti7734]

U are doing a great job with ur videos!

[@TheClackShack]

Thanks.

[@jamesshelton9126]

I like your switch cover

[@TheClackShack]

Thanks, that was one of my very first template designs.

[@justwannacraftCathyM]

It's a new day and a new Maymay attack! Blessings!👍

[@TheClackShack]

Tell her I said hey..

[@charlesreicks648]

my home position hits the back just a little. How do I change the settings. I don't even see a place to do it. Thanks Tim

[@charlesreicks648]

I have the Xtool Di pro and lightburn.

[@TheClackShack]

There is not a place to change the home location that I am aware. (without some reprogramming). Make sure it isn't hitting on the wiring harness. If the wiring is lying behind the gantry, it can pink in the back.

[@d_warerepairandrestore4594]

Also how are you getting it to cut at that location. Mine cuts where the laser head it starting

[@TheClackShack]

I use absolute coordinates, not current position. I have lots of videos explaining.

[@d_warerepairandrestore4594]

Thank you, I appreciate the info. I will look that up

[@Golfexpertbelieveme]

whats the X3 Y3? did i miss a video?

[@TheClackShack]

Return to after a cut. It’s an older video, it helps with making multiple items. There is a video. It is a setting in lightburn

[@brad_neal]

Dude, you are a class act. Restores my faith in humanity... well, sorta! Sub'd!

[@TheClackShack]

Thanks, glad you like it.

[@DRK67]

You’re rock’n it brother!! Great channel great content!!!

[@TheClackShack]

I appreciate that!, Thanks for the support

[@UnitTx1953]

Ok how do you slow down the homing speed?

[@TheClackShack]

In lightburn, it is derived from the framing speed. In the move tab on the right

[@gayle3860]

Great video! Very informative even though I have an Ortur LM3 & a Sculpfun S9! Be safe!!

[@TheClackShack]

Glad you liked it, I wouldn't mind getting my hands on the new Ortur.

[@Fleshybitz]

Thanks for your videos they are helpful. One criticism is you talk about other projects you have done but you don't show it, I wanted to see the mirrors.

[@TheClackShack]

Alot of the stuff I make I custom gifts that I can't share. I do have a video of one that I made for myself. kzbin.info/www/bejne/poa5nIejepeSh6c

[@TheClackShack]

kzbin.info1s1G_-suRR0

[@JLP75766]

If you want to stop changing out the leg extenders all of the time check out A Zone Precision and Machine. They make an aluminum extension made on a CNC. I don't have to ever remove the legs from the corners because I can focus from the bed all the way to the top of my R2 rotary with a 30 oz. tumbler in it with all of the leg sections installed. I previously had a 3D printed extension that worked but since I was using it to focus in the same place over and over again at different heights the locking screw on the D1 was eating into the plastic and I had to lift the handle on it 4 or 5 times to get it to lock down each time and it kept getting worse. I did also note that the 3D printed one had some wobble in it after a while that let the head get off center which skewed my cross hairs a bunch from square. I am not affiliated with them in any way, I am just a satisfied customer.

[@TheClackShack]

My only concern is that the added weight might cause more stress on the stepper motors at higher speeds. I will come up with an alternative eventually. Thanks though.

[@JLP75766]

@@TheClackShack I run some projects like business cards with real fine detail at high speeds (9000 mm/m) and I have experienced really fine detail in the lettering. The stepper motors are doing fine after more than 1,000 business cards engraved on both sides with info on one side and a QR code on the other. Joe

[@TheClackShack]

@@JLP75766 cool

[@gayle3860]

Oh ya, I like the new enclosure, but the original one better!!

[@TheClackShack]

The new one was to just make a design others could use without a sawmill. They both work really well.

[@billygentry2707]

How do i set the home position on my 10w D1 pro so it won't make a grinding noise when it going to the upper left corner'

[@TheClackShack]

The pro should have limit switches for homing, that shouldn't be an issue. You running lightburn or xcs?

[@billygentry2707]

@@TheClackShack I figured it out. I had to relocate my cables. Apparently they were in the way.

[@TheClackShack]

@@billygentry2707 that can happen with the D1

[@susieb8610]

Todays clack attack!

[@TheClackShack]

Tell Maymay that the Clack Payback is coming

[@rebeccarandazzo7961]

#CLACKATTACK -- I love my ink bandit!!!

[@TheClackShack]

Thanks, I hope everyone does.

[@Shenandoahleather]

My D1Pro 10w unit home is off at least 2 or so mm each time in Lightburn. Frustrating as I cannot use abs coordinates with it.

[@TheClackShack]

Slow down the framing speed.

[@Shenandoahleather]

I checked framing speed but I'm not sure how it relates to the home button and subsequent movements as it seems to stay the same speed no matter the framing speed. I did, however, notice that when i manually pushed the gantry toward the far left position there was some resistance - seemed like from the cables on the right side. So i adjusted those a bit and it seems to have fixed the problem. It is getting late and I have to work in the morning so I've already missed my bedtime lol. I'll try it out tomorrow evening a bit. Once I run into an issue I am OCD about getting is resolved. I appreciate the time you took to provide some possible help. I watch your videos often.@@TheClackShack

[@TheClackShack]

@@Shenandoahleather hover over the home button and you will see that framing speed is used as homing speed.

[@TheClackShack]

The cable bundle on an xtool d1 can cause some drag. you are gonna want to work to get it free of piching or being tight. @@Shenandoahleather

[@donnasuehoward4020]

It's a new day and a new attack. 😆

[@TheClackShack]

Good ole, Maymay....lol

[@charleslamont2963]

My D1 Pro will not home properly due to (the X Tool folks say) what are bad limit switches ... on a brand new machine. Replacement limit switches are supposed to be on the way, but, who knows. X Tool folks need to do much, much better in the area of customer service. Machine good. Customer service...not so much.

[@TheClackShack]

I would make sure the limit switches are turned on if you are using lightburn. There are required settings

[@blow_u_away]

@@TheClackShack Where do you turn on the limit switches ? I watched one of your videos but cant remember which one. You had a problem of the laser head making a grinding noise when it ' homed ' back left corner. Im getting the grinding at the moment :( How did you stop this ? Thank you

[@TheClackShack]

@@blow_u_away if you have a pro, it is in machine settings in lightburn

[@blow_u_away]

@@TheClackShack I have a pro . Went into machine settings but couldn't find the option to turn on / off

[@TheClackShack]

@@blow_u_away it should be setup correctly if you import the file XTool has for lightburn