TH350 Automatic Transmission Disassembly | The School of Shift

  Рет қаралды 119,357

Monster Transmission

Monster Transmission

Күн бұрын

Пікірлер: 44
@LandonRoy-cv9rt
@LandonRoy-cv9rt 4 жыл бұрын
I was so intimidated of transmissions until I watched this video, unbelievable what a good teacher can do for you!
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
We are happy to help! Check out our other videos on here and our full rebuild series vimeo.com/eatmyshift/vod_pages
@TheDocrock100
@TheDocrock100 4 жыл бұрын
Outstanding instructional video. I learned a lot. Enough to decide not to rebuild it myself and happily pay someone for all that work.
@bowl-of-chicken-soup7107
@bowl-of-chicken-soup7107 2 жыл бұрын
I may be about 4 years late but as a teenager trying to disassemble a th350 for my dad, this video is saving my life. I can’t thank you guys enough
@LandonRoy-cv9rt
@LandonRoy-cv9rt 4 жыл бұрын
I followed this video step by step and I successfully rebuilt my own TH 350 and it’s amazing, so smooth, thank you I saved at least $1250 and I KNOW I did a perfect job with high quality B&M part kits. THANK YOU MONSTER TRANSMISSION
@keenaconner2108
@keenaconner2108 4 жыл бұрын
Yeah but he fails to show you exactly where your check balls are. There are 4 and some transmissions have had a shift kit put on them so then there sometimes is only 1 so i have seen in several other videos. Also a few other things he does leave out in this video like alpt of parts have to be lubed back before putting back toether and lip seal tool it takes to lock other parts back in amd soaking your clutches in transmission fluid for a couple hrs before rebuilding.
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
This is just the Disassembly, all that is covered in the rebuild portion.
@lfk76
@lfk76 2 жыл бұрын
Perfekt instructions, disassembled my old short TH350 K Thanks from Sweden!
@joracer1
@joracer1 4 жыл бұрын
This vid is great, but who ever designed that transmission was a genius...
@gettinthrewlife76
@gettinthrewlife76 5 жыл бұрын
Thank you, this video is so going to help me when I redo my th350 for my 76 Buick Regal 3.8l. ✌️ out from Modesto,CA 👈😎👉
@mikesimek6448
@mikesimek6448 3 жыл бұрын
I could take it apart for sure, but by the time I get to putting it all back together I wouldn’t know what bolts went to what and totally forget how to put it back together, it’s definitely worth paying somebody no matter how you have to raise the cash. IMHO
@brianortiz2200
@brianortiz2200 5 жыл бұрын
Great video There was too much water on there
@pahinhwinh3936
@pahinhwinh3936 Жыл бұрын
A tow truck driver towed my company's 1981 Silverado K10 wrong and destroyed the tranny. Yes, we're suing. I spent the winter of 2022-23 IN NORTH DAKOTA ON CRUTCHES. On ice, thru snow above my knees. The tow truck driver's employers were heard to say, "We've gotten away with this before, and besides it's just some Indn's truck". Racist and arrogant and they don't deserve to be in business. This video has been a LOT of help, since I have not rebuilt a TH350 in 3 years. Yes, this Indigenous woman rebuilds vehicles. So thanks, Monster! Btw, the rebuild by a top local transmission shop cost $2,365(.56, including replacing the front u-joint in the drive line). Add in lost income and pain and suffering and we're talking serious money. Not to mention the lack of respect of the opposition for business.
@marocky92
@marocky92 Жыл бұрын
super intrestimg, greets from Germany
@mathewshackelford8037
@mathewshackelford8037 2 жыл бұрын
The amount of water that came out of the transmission is crazy! Great video though!
@cobaltsslsj5891
@cobaltsslsj5891 Жыл бұрын
yes car must have been under water
@faridbakhshian3373
@faridbakhshian3373 Жыл бұрын
What’s the governor’s job in this gearbox bro? Thank you
@jamalcole1985
@jamalcole1985 6 жыл бұрын
Nice video. Gil Alfonso Is rebuilding a th350 for my Caprice.
@Stumann6661
@Stumann6661 6 жыл бұрын
Great video for the "DYI" guy. I would use more specialty tools, i.e. a seal puller tool as well as a front pump removal tool. By the way, what glove are you using? I have tried several types, but haven't found ones I really like. Those seem to fit well without hindering your dexterity.
@MonsterTransmission
@MonsterTransmission 6 жыл бұрын
Thanks! Yes, we try to show how you could do it in case you're missing tools. Curt is wearing Black Nitrile gloves by Safety Director Elite. They are industrial gloves, latex free and powder free.
@darylvoorhees2629
@darylvoorhees2629 2 жыл бұрын
I just finished rebuilding my th350 and have it in the car. The transmission performs well (shifting, etc...) But I have an issue with tranny fluid pushing out the tranny dip stick when I shut the engine off. After diagnosing the problem I blew air into the dip stick to check the that the breather vent isn't blocked in any way. I removed the vent tube and found that the passage way to the breather vent cap doesn't vent. So the tranny is building up pressure and blowing out the fluid through the dip stick tube. I followed all steps when rebuilding and can't figure out what the blocked is caused from. Anyone have any ideas before I pull the tranny from the car and take it apart again. Thanks for your help
@camodudemtbh7594
@camodudemtbh7594 4 жыл бұрын
How much would you charge to rebuild a transmission like that?
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
The price will vary depending on the build and application of your custom built transmission. You can find them here: www.monstertransmission.com/Turbo-350-TH350-Transmission_c_3938.html
@kennyrmurray
@kennyrmurray 4 жыл бұрын
Where is the re-assembly video for the th350?
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
You can find the full rebuild with 50% off here: vimeo.com/r/2Jsd/S252UGNTNm We can include the full rebuild with the kit as well : www.monstertransmission.com/TH350-Rebuild-Kit_c_4324.html
@Jorgenson80
@Jorgenson80 4 жыл бұрын
Looks like water/coolant got in there. Replace radiator or secondary coolers.
@davidclark5138
@davidclark5138 5 жыл бұрын
Where can I get the rear clutch pack lock in compresser
@keatonbeckham5214
@keatonbeckham5214 3 жыл бұрын
can i use a c clamp instead of the compression tool?
@MonsterTransmission
@MonsterTransmission 3 жыл бұрын
This is not the preferred way but it has been done in the past by other builders we always suggest to use the Compression Tool. Thank you for choosing Monster Transmissions!
@davidclark5138
@davidclark5138 5 жыл бұрын
Where can I get the froot press
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
Give us a call we'll help you out 800-708-0087
@keenaconner2108
@keenaconner2108 4 жыл бұрын
Yeah how to you release the band at 11:50???
@MonsterTransmission
@MonsterTransmission 4 жыл бұрын
You can apply the band through the valve body area and use a large flathead screwdriver to help pull it out.
@keenaconner2108
@keenaconner2108 4 жыл бұрын
Yes i figured this out.. Was trying to do what's in the case before messing with valve body..but figured out the servo has to come out first so it will release it. Thank you !
@papanesto1976
@papanesto1976 6 жыл бұрын
What is wrong with the fluid in this trans. Looks like canola oil!
@ModsnRods
@ModsnRods 5 жыл бұрын
It's old. That's why she on build table!!
@yankeeroad626
@yankeeroad626 5 жыл бұрын
I think they pulled it from the Titanic! Either that or they gave it a pressure wash enema!
@bobstiles5639
@bobstiles5639 5 жыл бұрын
its not fluid its water. If you look as he's pulling the trans apart theres plenty of rusty parts inside.
@mrmanitoba
@mrmanitoba 5 жыл бұрын
That small snap ring is almost impossible to remove.
@MonsterTransmission
@MonsterTransmission 5 жыл бұрын
Haha yeah it's a tough one!
@jimmyers8939
@jimmyers8939 3 жыл бұрын
had some water in it.
@buchanansleeve7427
@buchanansleeve7427 3 жыл бұрын
omg that oil is nasty
TH350 Transmission Rebuild Part 1
43:08
War Paint Offroad
Рет қаралды 15 М.
700R4 Automatic Transmission Disassembly | The School of Shift
22:49
Monster Transmission
Рет қаралды 161 М.
Perfect Pitch Challenge? Easy! 🎤😎| Free Fire Official
00:13
Garena Free Fire Global
Рет қаралды 79 МЛН
Who's spending her birthday with Harley Quinn on halloween?#Harley Quinn #joker
01:00
Harley Quinn with the Joker
Рет қаралды 23 МЛН
HELP!!!
00:46
Natan por Aí
Рет қаралды 55 МЛН
How to build it better... Learn how to better your TH350
30:30
Precision Transmission
Рет қаралды 86 М.
Monster Transmission's TH350 Mega Monster In A Box
3:26
Monster Transmission
Рет қаралды 17 М.
Build video TH350 Transmission video 1-2.
32:09
Precision Transmission
Рет қаралды 196 М.
Th350 Automatic Transmission Rebuild Part 3 - Shift Kit
39:31
War Paint Offroad
Рет қаралды 5 М.
GM TH350 Rebuild PT1 - Overview and Case Preparation
31:09
Nick's Transmissions
Рет қаралды 6 М.
TH350 Shift Kit Installation
40:21
Brian Swayne
Рет қаралды 18 М.
Incredible Process of Old AC Compressor Recycling to Make High Quality Washers
15:04
How to Rebuild a TH350: Beef Up On a Budget
15:15
Nick's Transmissions
Рет қаралды 16 М.