The Barra Was in BeamNG All Along!!!

map is mount coot tha
It turns out that the barra was always in beamng hiding in plain sight!! I just had to liberate it from its boring coffin, and then slap a giant turbo on the side!!
it will be available on my repository page - www.beamng.com/resources/auth... In the mean time, I've given it to ‪@SimulatorAdventures‬ for an early look :) I suggest checking him out
leave a comment maybe? :)
send me stupid things on twitter fillman86
here's the discord - rules are don't be an arse lol / discord
feel free to use footage from my videos, up to 50% of any one video, just credit me, and supply a link to the video with it
want to throw your money away? - store.steampowered.com/wishli...
edited by - Gear Driven Cams Gang#8604 (discord name)

[@nopenope9153]

Yes. Some aussie content. Thank you sir. Now we need an AU falcon to fit it.

[@fillman86]

haha a genuine AU or BA XR8 would be cool!

[@marcosstables]

@@fillman86fill now im expecting video 😂😂😂😂😂

[@fillman86]

@@marcosstables if you make it, I'll do a video on it

[@rhythmrides8902]

There’s a AU mod but it’s a pretty bad mesh lap

[@forbid8790]

ngl the au is ugly as fuck but its iconic

[@jimbobbigknob2718]

I NEED a beam mp event where people modify vehicles in this sense for highway pulls and digs

[@fillman86]

the problem is that you can't modify whilst in beammp :/ it would be cool though

[@jimbobbigknob2718]

@@fillman86 quite unfortunate indeed :(

[@That2007YZFR6THUNDERCAT]

@@fillman86 I actually was able to at least I could but it was taken from me unfortunately.

[@fillman86]

@@That2007YZFR6THUNDERCAT okay you might be able to mod in beammp, but it doesn't transmit over beammp properly

[@That2007YZFR6THUNDERCAT]

@@fillman86I got a semi to do over 300 on the strip in west coast

[@mrkosmos9421]

It's always a good day when Fil blows up an engine in BeamNG by accident

[@fillman86]

haha gotta beefen up those rods!!

[@BrooksMoses]

So, just as a datapoint, the I6 that you grabbed is actually quite close to a late-1960s Pontiac OHC I6 engine. The valve cover and headers are quite distinctive. (And, in 1968 and 1969, it was a 4.1L.) Personally, I liked having the 200cid Barra-predecessor engine in my '65 Mustang because the weight balance was vastly better than the balance with a V8. I can definitely see the appeal of a new head, though; in the old head design, the log-style intake manifold is cast in one piece with the head, which made carb swaps a bit tricky.

[@fillman86]

Yeah, many engines are similar, and this one was a lot closer to the 70/80s i6 we had than the actual barra

[@BrooksMoses]

@@fillman86 : Yup -- though I misspoke (and edited my comment to correct myself); the Pontiac engine was an overhead-cam engine, which was pretty remarkable in an era of pushrod engines! And it was very much not a truck engine, which makes BeamNG's use of it amusing. It still looks a lot like any other engine of the era though, unless one happens to recognize the details before being distracted by the GIANT TURBO.

[@maxypoo4652]

I think what your referring to as turbo lag is more like boost threshold. The former is more related to throttle response while the latter refers to the minimum engine speed required to spin the turbo effectively, which is what we’re dealing with here.

[@fillman86]

Oh cool, but due to it being the commoner’s tong like mine, I don’t think it’ll hurt to keep saying it 😝

[@kingstyle7314]

Nowadays people take the last generation of the 300 I6 and are putting massive turbos on them basically making torque monsters that's our substitute for not having a Barra and sure the old versions don't make any power but we love it because they are very strong and reliable

[@fillman86]

cool, does the stock version also take large gobs of fuel? haha

[@kingstyle7314]

@fillman86 fuel economy wasn't really the 300i6 greatest benefit you basically drive it like a diesel with a 5 speed, speed and rpm isn't a benefit either its just reliable and will survive the apocalypse if you look at the head on one even on the 240 it has an inspection plate that covers the side of the head so you can see the pushrods

[@fillman86]

@@kingstyle7314 pushrods? omg that's an ancient engine then

[@kingstyle7314]

@fillman86 the 240 design was from the 60s and the 300 is just a bored over 240 with fuel injection that's pretty much it and in 97 it was replaced by the 4.2 v6 like what's in my truck and the 4.2 is just a 351 small block with 2 cylinders cut off doesn't handle boost but is still a very reliable motor but it's another slow grandpaw fleet motor made to just keep driving

[@isaactrockman4417]

@@fillman86 the ford 300 (aka 4.9ish liter) inline 6 was ancient, heavy, thirsty, and underpowered as hell but I’ve head of them continuing to run in conditions that should kill any engine (bolt bouncing around in the cylinder, running out of oil, sand in the oil etc)

[@Dylze]

This motor is a fine piece of machinery, with insane power potential on stock internals, I also wouldn’t really say anything before 2003 is a Barra seeing as they weren’t labelled as a Barra, I do agree for maybe the intech tho since the only real difference is the top end of the motor, can’t go wrong with either motor tho, happy we get them in the nz

[@Dylze]

Although if I remember there is the Barra 220, nugget motor but only other motor to my current knowledge with the word Barra in the name

[@nathanlazovic8651]

​@@Dylze barra 220 and 230, the 5.4 SOHC V8s found in the non-xr/fpv lineup. Got the 230 in my fairlane in Aus

[@Ferrari255GTO]

I would've rolled the turbo lag at least 500 RPM back, it's nearly unusable that way. It could be fun using it to troll friends tho

[@fillman86]

haha well you now know how to retcon turbos from other cars, so you can apply your own turbos ;) I wanted this one to be just a bit undrivable haha

[@dantevito1193]

8:36 only the diesel D-series has a turbo (a single one, with i think 6 options). If you want to filter it that way, you can expand the configs

[@fillman86]

I was just looking for a turbo that is meant to spin at normal petrol speeds, for an engine of a similar size :(

[@futuconitro]

The barra engine is almost the same we had in Brazil, its is the most famous engine here and the one people love to tune until today, the fuel efficiency was terrible 5 KM/L urban or 8 KM/L on road the engine became famous because of the Chevy opala here, the power output and the reliability made the 6 cyl the best engine and that was enough to survive for years and even with ford maverick v8 the 6 cyl won in the sales and got peoples hearts and pockets and until today is the best and most used in competitions, you can even find some 2000 hp cars with the original engine block, the fueltech owner (Anderson dick) have one opala in us and constantly show and talks about it on his KZbin chanel

[@fillman86]

oh that's cool, chevy never came to australia though, so we don't know about that engine :)

[@sterlingmakara]

My friend has an '80 f150 with the 300 straight 6. Thing runs on 2 psi of oil pressure, sounds like a diesel, but she just keeps chugging along. Great engine.

[@fillman86]

Yeah, and now ford is becoming one of the least reliable car companies :/

[@Leo.J.G]

Amazing love your videos!!! Keep it up!😂 I Really Do NOT understand how your not one of the well known moderate yet.

[@fillman86]

well my videos are long, so younger people don't usually click the videos, and they're the biggest audience

[@--fishiiki-]

I just recently made an automation Barra 270T and a tuned big single turbo version and put it in a Volvo 240 body. Absolutely love this thing

[@fillman86]

haha that'd be something to behold in real life XD

[@--fishiiki-]

@@fillman86 just a shame I let the turbo stick out the hood, it would have been a great sleeper

[@watso-cd21b57]

the difference between the barra and the intech is the fact that they intech has sohc (single overhead cams) while the barra has dohc (dual overhead cams) im sure there are other minor differences but i cant be stuffed going through the internet anyway great video

[@fillman86]

yeah, basically the same block, intake, exhaust etc, just the head itself

[@benjaminwatson7868]

Barras come with vct which is why next to there huge displacement they work so well with boost

[@samuelrudy1697]

Fillman we in America have something similar to the barra it was the amc 4.0 i6 originally designed in the early 40’s was reworked in the 60’s and used till 2006 this was a push rod inline 6 with exhaust and intake on the same side of the engine being used in 2006

[@fillman86]

lol a reverse flow head in 2006? that's wild! But the barra's origins is actually american in the first place as the thriftpower 6

[@samuelrudy1697]

@@fillman86 to be fair it was one of the most reliable engines ever produced as in 300,000 miles (480,000 km) is pretty common to see still running

[@zionjarman3610]

4.0 was the jeep the ford was 4.9 ford has the cheap i6 wich was a 250 something i6 and the other was a 300 i6

[@fillman86]

@@samuelrudy1697 I had one with over 700,000km (an ex taxi)

[@Fodder916]

Bro if that car rams into the rear of a semi trailer that turbo is history💀💀

[@fillman86]

So are any small animals that run across the road whilst that large impeller is spoiling

[@ChromaticSchnitzel]

Whoo! Mount Coot-tha! 100% gonna drive up there one day, but not on my Ls XD

[@fillman86]

oh, so it is a real place?

[@ChromaticSchnitzel]

Lmao, it's a mountain in South-East Queensland XD

[@vkslothy1470]

The mighty intec that came before the Barra ln the falcon models up to the au were only a single cam whereas the Barra was a twin cam. The intec was still a decent motor, nothing to froth over but can still produce upwards of 600kw with supporting mods and a bit of boost. The mighty Barra on the other is again nothing special standard but with some boost can reach well over 1200kw reaching rpm over 9k. The Barra was a tank from the factory and a very thirsty one at that, but it’s the engine that makes most v8 performance vehicles break a sweat just hearing its name.

[@fillman86]

I agree, the NA engines have power, but deliver it in such a boring way. Though the intech only lasted 4 years from 1998 - 2002. Before that it was still quite similar from 1988 onwards, before that it was pushrod for about 20 years. Though quite different, they were basically revisions, instead of fully new engines each time

[@benjaminfrohns]

Good video once more. 😊 Only know the Barra from KZbin. Don't think it was ever available in Europe.

[@fillman86]

I don't think it was? Just a thirsty australian lump

[@benjaminfrohns]

@@fillman86 the Falcon is known here as Mondeo. That came with the turbo I5 as biggest engine I think. (3.0 V6 existed, but n/a and less power).

[@fillman86]

@@benjaminfrohns I don’t think the falcon was ever sent anywhere, not even labeled as a mondeo :/

[@benjaminfrohns]

@@fillman86 You are right, it's not the same car.

[@Ferrari255GTO]

​@@benjaminfrohns i was about to say, the mondeo is far more boring than the falcon and i don't think they share anything at all

[@Raphael-vh1wv]

I saw that title and I knew this is going to be a good video ❤ when will a new automation engine swap video come out ? 😅

[@fillman86]

dunno, it'll most likely happen at some point though

[@Raphael-vh1wv]

Ok

[@rickcupola6262]

I see Barra and Fil, I click, and I am instantly entertained. So stoked to see a proper Barra in BeamNG with some intercooler and turbo action, and gap some fast cars while not breaking... hopefully...

[@fillman86]

intercooler? you give me too much credit :P

[@akidafloof]

@@fillman86 you made a fully animated and driving combine harvester... in beamng all you gotta do is make a rectangle box with lines on it and two spinny bits on one side

[@Twinfire]

Some realtime modding, blackmagicfuckery mythbusted. Love it. Thanks for the Barra build.

[@fillman86]

Abarra kadabra

[@tomsterbg8130]

This is the best modding video I've seen yet!

[@fillman86]

I'm glad you enjoyed it :)

[@craftgamer_23]

Really good job, now add 5 more turbos😂

[@fillman86]

haha the never ending story (of lag)

[@Mersumias220]

You said not to ask BUT i will still ask that you should go to that wet version of the map😂 your videos are really good👍🏻

[@fillman86]

haha that car on a wet map? haha it'd be hell

[@Mersumias220]

@@fillman86 😂😂

[@Yxnio]

That turbo spool sound very good😍

[@fillman86]

yeah, the truck turbo really sounds cool!

[@RodrigoAmorSuarez-zk9wg]

perfect. Now slap that turbo into a pigeon

[@Bmcbride040]

My day before Fillman upload: 🙂 My day after Fillman upload: 😁🤘🏻 Very amazing and informative video as always 👍🏻 glad to see you back!

[@fillman86]

I'm glad they bring the happies, and I'm also happy to be back at it :)

[@jwalster9412]

I dont know if you figured this out or not, but the turbo options in the vehicle configurator are under the 'intake' options (because a turbo is technically an intake i guess) and the D series does have turbo options, although a good majority of the D series are NA or supercharged (i think the drift version might be turbo, and the diesel engines are turbo)

[@Ferrari255GTO]

It's a technically not correct to say either as a turbo kit needs both new exhaust headers and an intake adapter. I've seen other mods have the turbos on the exhaust header option too before this one

[@jwalster9412]

@@Ferrari255GTO I think most of the cars in beamng don't change out the exhaust headers, I could be wrong however. I'm pretty sure the bolide and D series nun stock headers for their turbos.

[@Ferrari255GTO]

@@jwalster9412 it does visually change, in fact if you check all of the cars that can have a turbo don't have the option to use different exhaust headers. It was made this way since it'd be redundant and unnecesary to be able to run turbo headers without the turbos and it would be complicated to implement in game

[@thermalops]

None of the gas engines have turbo’s. It’s the diesel engine option for the d series that has a turbo

[@jwalster9412]

@@thermalops makes sense.

[@jwalster9412]

You should take the pigeon engine, give it an aluminum block, lightweight forged internals and 900Hp and swap it onto the scintilla and see how it affects it.

[@fillman86]

beamng doesn't quite work like that XD

[@jwalster9412]

@@fillman86 had a slight typo, has been fixed 👌

[@jwalster9412]

​@@fillman86 I mean of course replicate the engine in automation to a similar degree of the pigeon engine (exact bore and stroke wouldn't matter because all you need is the right torque curve) and then modify it tastefully.

[@fillman86]

@@jwalster9412 sounds like you have the skills to do it yourself :) let me know how it goes

[@Ferrari255GTO]

​@@jwalster9412 there already is a mod to install a pigeon engine onto at least one of the civettas (don't remember wich one of them) so it could be easyer than it seems

[@joeyschmitt3977]

The d series has a turbo with the 6.0 diesel option. It might work better, it spools fast and can put out 75 psi of boost with the stage 3 variant

[@marcosstables]

This is so cool because I have one in my ford Territory 😂

[@fillman86]

that'd be cool, if it wasn't a big softroader :P

[@HOLDEN1856]

Big Bloody Beauty Barra! Just like this vid!

[@fillman86]

I do love them, even if they are very flawed!

[@steampunk896]

If possible you should make one that can hold 1100 hp with the 6 speed sequential I think that would be killer and use the Meo drag pack for the tire for really good traction

[@memorimusic420]

Could you maybe try and make something like a Turbine car (ex. Chrysler Turbine Car) something with shitloads of torque, extreme high rpms & very smooth

[@alwayszooded]

i love this great work !

[@fillman86]

Thanks 😊

[@curiosity780]

Would like to say that not only do they guzzle fuel, they keep guzzling fuel for hundreds of thousands of km when looked after

[@fillman86]

at best I'd get in the mid to high 9L/100

[@dolphbro4539]

Theres already a 4.1 i6! As soon as i saw this title i knew the engine you were talking about cause theres a mod ive got where they put the 4.1 in the grand marshall!

[@MaxDad7]

If you can find it, there used to be some forum posts about a guy who had a Ford f-150 or F-250 pickup with the 300-6 and installed a turbo from an early 6.5L Chevy Duramax. IIRC, the turbo started to kick in around 2000 RPM and he was hovering around 400-500 lb-ft. of torque. I think horsepower was over 200 but don't remember. For a smaller engine like the one here, I would probably try to pull a turbo off a mid-5L diesel to be more "correct". I miss the 300-6. Sure it wasn't meeting emission standards and Ford didn't see a reason to make it meet it, but it was reliable. I have an '89 Ford F-150 with the 300-6 and I don't take care of it, yet it still just runs and runs and runs.

[@AI-Idiot]

noice, imma try it as soon as im done with school by 7pm.

[@fillman86]

it'll be live on the repository once it's approved :)

[@AI-Idiot]

its 7:36, and I still have homework, it'll need to wait 'till friday

[@AI-Idiot]

@@fillman86 I want to do it with the autobello picolina

[@fillman86]

@@AI-Idiot I don't need to know about your proclivities ;)

[@WarrenMoney]

I bet in the future someone one day will make a hood for this car that fits this engine

[@fillman86]

if you download the mod, you'll see that I already did that :P

[@MoneyRussian]

what program are you using to made hte engine edits thats so cool

[@fillman86]

visually? that'd be Blender (it's free), but if you're talking about code, that's visual studio (free with windows), but I'd suggest also looking at "visual studio code", or "notepad++"

[@NextDrip9]

If you were to leave the drag transmission on it and use the trans brake it would probably get rid of at least some of the turbo lag-

[@fillman86]

possibly, but that only works well for driving in a straight line :P

[@airpex7970]

nice idea, maybe the turbo should kick in earlier and drag performance could be better

[@fillman86]

haha I've shown you how to do turbos now, so I think it's your turn haha I just did this as a bit of an absurdist joke :P

[@OversteerAllDay]

1:14 you Aussies also have a lot of ls powered cars as well

[@fillman86]

not really, they're quite rare, and a broken LS can still fetch $3k aud

[@lau_taro0037]

I hope we get un el Camino soon enough, until then can you make one for us mortals? 🙏

[@fillman86]

lol probably not

[@lau_taro0037]

@@fillman86 noooOoOOoOOoOOooOOoO

[@andrewrost9233]

I just used this mod today, pretty cool, the engine needs more exhaust power though, can’t spool the turbo very well

[@fillman86]

Haha I suggest watching the video

[@andrewrost9233]

@@fillman86 yep my bad, I did, makes sense considering the turbos size, needs MORE Rpm, and less black smoke

[@bitelaserkhalif]

it's *I N T E C H* time BTW, may I modify your mod and add twin cam head (barra) version once it's released?

[@fillman86]

sure, I'll be doing something similar one day too :)

[@Jgoliver27]

The Barra hav a brother of situation here in Brazil The 4100 that came in the Chevrolet Opala The engine is from the 60's and this engines for drag Racing here, the stock block hold's easily 1500 Hp

[@fillman86]

cool, I think someone else mentioned it too :)

[@tuberneqo]

ah, amazing now we need a rb30 😁 (also the turbo in the d-series is only available for the diesel engine)

[@fillman86]

yeah, the turbo is pretty chungus, and I wish I knew how the turbo would have really behaved on this vehicle

[@christiansousanis5465]

Ur an aussie? maybe im cracked or something but u sound American, anyway, u earned urself another sub tonight 👏🙂

[@fillman86]

haha I am half canadian, but born and raised in South Australia

[@christiansousanis5465]

@@fillman86 damn that's mad. South Australia, no wonder ur so familiar with the Barra lol. Im about to have a bit of a binge of ur stuff, ur really enjoyable to watch.

[@fillman86]

@@christiansousanis5465 well the barra is ford, which was made in victoria, in SA we made Holdens, but they were never particularly great either, just some fun

[@christiansousanis5465]

@@fillman86 hehe yea but u can't go 3 houses down the street in SA before running past a Barra lmao.Also, I beg you to do the o'l LS1 Swap Gemini / Torrana in Beam.

[@budderswag]

Lol the barra v8 is pretty good lol

[@fillman86]

nah, the 3 valve was so mid that there's almost no examples of them on the road.. it was an odd choice

[@julioau]

I really wanted to replicate Audi's Dakar Electric (but kinda hybrid-ish?) Vehicle and use two of 'insert-one-of-the-new-offroad-vehicles-with-an-independent-setup''s suspensions, both front and rear. 😈

[@fillman86]

hmmm that's an intriguing idea, I'll add that to the list :)

[@Tode420]

2:39 aussie moment

[@fillman86]

we try haha

[@bigblockbumpside2296]

Love everything about! Besides the charge pipe….

[@fillman86]

haha have you seen the intake pipes of the barra? they run right over the top of the valve cover.... for no good reason!! I'm glad you liked the video though :)

[@epictrailbuilder.65]

we get 700km on 1 tank in our fg xr6 turbo

[@fillman86]

yeah, that's horrible haha but it's still better than what I'd get in my BA non-turbo

[@captainchicken8983]

Intech made a v8 too, all aluminum made by fiat, for lincoln in 93

[@fillman86]

interesting, tbh I don't know much about intech, other than the i6 that became the barra, even though I've had a few in the past

[@_blood_moon_proto_1500]

why do i feel like the closed caption should just be "manic aussie laughter"

[@fillman86]

mwahaha

[@_blood_moon_proto_1500]

@@fillman86 aye, at least its not manic german laughter, cus then it would just be meet the medic all over again

[@geemcd]

When I lived in NZ in late 00's my boss let me drive his XR6 work "truck" ❤

[@fillman86]

oh, did you correct him with, "um actually" haha

[@geemcd]

@@fillman86 I nearly wrapped it round a power pole. 4.0 turbo. Bonkers thing.

[@Ferrari255GTO]

​@@geemcd the turbo caught you off guard huh? They can be quite evil sometimes

[@psynriter]

Barra in my 2006 territory 6spd auto I got 820kms out of full tank driving like a tight arse at night outback NSW... 75 - 80 km/h a fraction above and below 1500 revs lol

[@fillman86]

yeah and for the amount of power you feel, it's not great numbers for highway cruising. It was moderate back in the day though

[@GrumpyIan]

I hope you make a challenge with your mates to make the most fuel inefficient engine and put it in the most aero dynamic car they can make and then race on nordschleife and limited to something like 4 liters of fuel. I know you guys did something similar on making a car fuel efficient but imagine the chaos having a 1,000 hp car on very tiny thin wheels.

[@fillman86]

haha we did basically that - kzbin.info/www/bejne/gX2liqaejbFmgsk but with only 1L

[@gwc_garage]

The engine is extremely capable as a modified engine. It's basically a bigger 2jz it's reliable and makes decent power with not that much boost. It also sounds cool as shit

[@fillman86]

kinda, but the engine does have faults, and is power limited to about the same as a 2J in the end, but with not bolt on aftermarket support, and it's really inefficient

[@gwc_garage]

@@fillman86 but it sound cool tho😎

[@lmc7233]

so there is a actual barra for the d series and now theres a ba/fg mod with there own barras

[@beta_croquette3926]

i woulda made the turbo hit at 800 rpm but other than that i love this shit

[@justvibingman]

Chevy made their own version of the Barra and it was in the 2002-2009 Chevy Trail Blazed

[@fillman86]

yeah, people have been telling me about it haha

[@RandomRichZ]

do you have tutorials that make sense unlike other channels on how to engine swap?

[@fillman86]

sure, like this - kzbin.info/www/bejne/j16up6ucmdV_Y7c kzbin.info/www/bejne/i4i0moqGmZWYg9k kzbin.info/www/bejne/h4i3c4Wbp8R-ipY and kzbin.info/www/bejne/nYiUkKZviZiIb7c

[@MAG3.]

that 4.1 engine looks like the amc 242 more than a barra (regardless they’re very similar)

[@fillman86]

yeah, I think this engine here is pushrod haha

[@isaactrockman4417]

@@fillman86 yea it looks exactly like the engine in my partner’s 1980s Jeep

[@magnaveradaboi]

People give the Too much hype to ford's "reliability," I do like the Pushrod 6's in the XF's tho. Very easy to tune /work on.

[@fillman86]

the reliability is probably the best part, but no one really seems to give much credence to it, and only think about the power you can make from it. But the fuel usage is probably worse than the boss260 :/

[@magnaveradaboi]

@@fillman86 🤣 my work Ute has a gas Barra. 15l/100km.

[@fillman86]

@@magnaveradaboi yeah, my BA has one, and on a good day it'll do 9L/100km, but only if you're cruising at speed

[@Ferrari255GTO]

It's the positive thing of using caveman technology, a caveman can fix it XD

[@crispyshaman4937]

The only reason why the barra is so loved cus of the tunning potential

[@fillman86]

other engines are sooo much easier to work with, like the 2j, any RB or SR, any LS, and that's not to mention that VW are easier to get high performance parts for

[@BrooksMoses]

@crispyshaman4937: That's pretty funny, since up here in the states the only head we got on that engine was the one with the intake manifold cast integral with the head, and it's hard to do anything with that! I have seen a kit where you cut holes in the intake manifold and braze on a couple of additional carburetor mounts, but that's pretty extreme -- especially for what you get from it.

[@poklianon]

You inspired me to make a 5 speed auto transmission for vivace

[@poklianon]

and i actually made it work

[@fillman86]

congrats.... but who goes out of there way to get an auto in a game? XD

[@itsdragragetime3572]

hry fill for somereason my barra engine doesnt come up in the swap help needed XD

[@Spring_Gevo]

Hey sir, have you ever heard of the Mercedes Accelo? Its a semi truck with a turbodiesel straight five, it is very unique and i would love to see you doing something with its engine.

[@fillman86]

just looks like a pretty generic vehicle to me?

[@Spring_Gevo]

@@fillman86 dunno, is it? It's the only 5 cylinder diesel at my country at least

[@SNEKR23]

this mod is awesome i made a 2k hp drag car out of it lol

[@fillman86]

haha nice

[@kamronpowell5784]

wgats the name of the map? nvm i just found the spot in the video where you say lol

[@monstertrucker2004]

love how there isnt an engine sound its all just turbo whistle

[@fillman86]

haha the large turbo does tend to drown the rest out a bit :P

[@omega1575]

Welp now I’m going on the mod manager

[@fillman86]

haha it'll be there once it's approved

[@RooMan93]

I wonder if Fillman would benefit from some Regex knowledge.

[@fillman86]

I googled it, and I get a thing called "regular expression"?

[@tajguthrie5017]

It goes from a single cam to a twin cam and different rocker gears

[@vanpstar1597]

Would you consider taking the semi engine from the T-Series, and putting it in one of the cars?

[@fillman86]

kzbin.info/www/bejne/lX6voHmhhdllnaMsi=QZG2aG4homVG5q11 kzbin.info/www/bejne/rWbSkHSchNVoaKMsi=rVmyNutNcMFgCS8p and kzbin.info/www/bejne/aZ62dJZjrZV-gtk

[@crispyshaman4937]

Filman the modding expert

[@fillman86]

haha it gets easier the more you do it :)

[@Doshiba]

Put the barra in the mazza

[@fillman86]

haha maybe not quite the body for it XD

[@Doshiba]

@@fillman86 aww :c

[@NZMOPAR]

My old Au Falcon would do almost 900ks to a tank not a Barra but they can't that bad on fuel I know the Territory AWD were bad on fuel

[@fillman86]

that's most likely at cruising, you put any kind of slow traffic in there, and it'll get much worse. Also that is not good mileage still for an 80L tank (I think the tanks were actually bigger though)

[@hsllama]

no way this guy just called the barra mid. 2 cylinders less and its still beating ls's

[@fillman86]

with a turbo, how about an ls with a turbo?

[@hsllama]

@@fillman86 u underestimate the 4litre barra

[@fillman86]

@@hsllama haha i have had multiple, I estimate it correctly lol

[@pontushaggstrom6261]

thumbnail reminds me of westen champlins mustang

[@fillman86]

had to look it up, and you're kind of right :) I might check out videos on it one day

[@pontushaggstrom6261]

@@fillman86 Yeah, westen is a wild one.

[@eltortoise6836]

My brothers 15 and bought a ba falcon he’s trying to put stacks on it 😂😂

[@fillman86]

prison time worthy!! :P

[@burnin_vibez243]

It’s a sohc 6 and I’m a proud owner of an efi one lol

[@fillman86]

nice, I've been around the intech, but I've only ever driven barra engines personally

[@shoeberrie]

what's the background music? it seems very calming

[@mickeynismocat]

9l per 100km here, and i thrash it!! at least 180kph every morning to work!

[@lostsoul192d5]

It showed turbo options for the truck because of diesels

[@Laid2Rest1360]

Its not just okay and barras would walk any ls

[@fillman86]

haha you're partially right, but it'd only "look" like it was talking pace compared to an LS with the same mods :)

[@zionjarman3610]

The d series has a turbo its on the diesel motors not the gas v8s, also the scintilla diesel has a good turbo with a hater pipe

[@fillman86]

I never said the petrol v8s did?

[@cadenmackay8930]

The modern Barras are the modern 2jz/rb25

[@jowweewww]

What map are you using?

[@fillman86]

in the description :)

[@audifamm]

can you make me a wheel and tire mod for wider wheels and streatched tires?? there used to be one years ago but cant seem to find one. maybe even more camber for some of the cars

[@thatsimracer666]

theres a barra mod out there

[@zigenstern]

another 10/10 tutorial

[@fillman86]

haha if you can follow my jumping around style of video, then sure XD

[@sophiajunnette7797]

You can mod a Barra in to the game

[@EJMAC]

I’m trying to put this in the legran it’s my first time tho at 2:50 there is a file that says unpacked where does that go?

[@fillman86]

if you have any mods, you can go into the mods manager, and unpack one of them. This will automatically create the unpacked folder. Alternatively you can create the unpacked folder in your mods folder, and make your mod in there (make sure to have the correct folder structure)

[@milobilodilo]

now put it into a au falcon automation mod

[@mightycaprice4483]

i reckon the hoppers 4.0l would be a better fit

[@fillman86]

hmmm I don't think this engine was ever reverse flow, and it's also carb'd, so it'd be even further from the modern barra. That being said, nice spot, I didn't know about that engine :)

[@mightycaprice4483]

@@fillman86 off the top of my head i think you can make the hoppers 4.0 a efi and it is a reverse flow im pretty sure