The BEST Audio Settings for FL Studio 20

[@thecasual9582]

Glad to see some new talent in the audio part of KZbin ✨🚀

[@Seiyefa_him]

Me too men

[@jorgetatemura2992]

This is the best explanation about how to configure the Audio settings in FL Studio because you're saying how it works!, Great job, I really appreciate it

[@okayypablo]

Thank you for explaining everything, I always set my buffer length low thinking that lower = less lag but I didn't know why I was getting pop sounds.

[@JAYFORJAY]

Multithreaded Generator Processing...Major Major help on something I was trying to figure out...Thanks Bro

[@calvinwingolo6857]

great video. Straight to the point and I have my audio settings ready for my mixing session. Thank you!

[@v4prez]

About to try this out 🙏🏽💠 I been taking my laptop to the stu and everything’s all good until they have multiple takes and want to hear them back, only plugins I use off the bat are auto and a rider and I feed the vocals to a mixer with a limiter only

[@Muwusey]

Honestly please make more content you were so straight forward and helped me understand so much more than I did just on the audio settings

[@sorry11303]

RT

[@MyStarPeopleExperiences]

Thanks, Jerry. Good instruction.

[@chrisjr56]

This dude is a life saver

[@SpeezyOTB]

Great explainer vid

[@trashtalent345]

Thankyou bro I appreciate it your going to help a lot of people.

[@Migomeat]

Bro we need more content for FL studio,I like how easy it was to just simply understand everything you said

[@OutlawBeats-er4nb]

Can you help me? Something went wrong with me and I don’t know why! I recorded my song on buffer size 128. Then I started doing the mixing process on buffer size 520. Then the session started to change its course based on the rhythm. Then I went back to put it back as it was on buffer size 128 again to fix the error, but to no avail. It has completely lost its correct path... Is there a solution?

[@ASKR303]

thankyou. just moved to software so its a whole new ball game for me

[@Emad-pc8bd]

Perfect tutorial. I have a question that should I check resample in sample settings for 48000 Hz since my sound device only supports this sample rate? If yes, then how can i have this checked automatically everytime I drag samples into the channel rack?

[@Algaretemusik]

Great video 💪

[@Macho_Beats]

Thank you a Jerry. 🙏🏽

[@Boufouloumix]

I'm the 900th sub😁

[@isozay9861]

Fire.

[@ivanmectin9106]

Hello, how would I go about creating a triplet consisting of 3 sixteenth notes in FL STUDIO ?

[@mixwithjerry]

1)Right click your hi hat channel in the channel rack 2) select piano roll to open the piano roll for this channel 3) this gives you more flexibility to place more hi hat notes on the grid 4) there is a toolbar at the top left of the piano roll that contains a magnet looking icon. Click that to select the type of piano roll grid you want

[@ivanmectin9106]

@@mixwithjerry Thanks very much for your help. I think I get it now ! :)

[@nateth3great860]

Thank you so so much man. Literally the best fl tutorials I’ve found yet.

[@therealshadowmusik]

Appreciate you bro I just started having clipping issues on my MacBook and after following ya lead everything is good Never had this issue until I started loading a grip of vsts 🙌🏾🙌🏾🙌🏾🖤🖤🖤💯💯💯

[@travonejordan8007]

⁰pop

[@shortendsweet7464]

Thanks Jerry...God Bless 🙌

[@jknock148]

Thank you so much for this!

[@mixwithjerry]

Thanks for watching 👍🏼

[@artzbeatz8321]

Great video! Can I ask you, would any of these settings have to do with my files having a glitch after I export them? Everything sounds great until I export it, then there are these temporary glitches I'm having.

[@mixwithjerry]

If it’s in your exported file then it’s likely one of the 3rd party VST plugins causing an issue. Are you using anything not made by FL? If you are.. turn those plugins off and do a export to see if the glitches are still there. If they’re not then you will need to further troubleshoot which plugin it is that is causing it.

[@artzbeatz8321]

@@mixwithjerry Hey thanks for the response! Well I am using a few 3rd party plugins. The thing is my mp3's and wav's sound fine when once their exported out of FL. This glitching is coming after I use my software to make a video for youtube. I tried some different software but its still doing the same thing. Not sure whats going on.

[@mixwithjerry]

@@artzbeatz8321 so the exported wav and mp3 out of FL studio sound good? It’s just when you use them in video software to make KZbin vids?

[@artzbeatz8321]

@@mixwithjerry yes exactly 😔

[@meekzi.14]

Men I like this fl studio tutorial

[@ru9204]

Thanks Jerry this is really useful 👍 I have an issue that I can't resolve, when opening up the splice app when fl studio 20.9 is open I can't hear the preview samples in splice through my headphones. I have the auto close feature enabled in FL, but there's still no sound when previewing samples. I'm using a focusrite 2i2 interface and have my headphones plugged into that. Cheers 👍

[@mixwithjerry]

Are you on Mac or PC? If on PC, go to windows settings and under your audio devices advanced properties there is an option to uncheck let programs take control of this device.

[@mixwithjerry]

I’m on PC so I’m not sure what could be going wrong on the Mac.

[@ru9204]

@@mixwithjerry Cheers Jerry this fixed the issue 👍

[@JTBEATS20]

i got all this set but do you know how to fix FL white noise when making beats it is rely bugging me ?

[@The_JP251]

Hello. Do you know how to create a set of green notes inside the piano roll, and then have a single key from a midi controller (i.e. Akai mpk mini keyboard) activate those notes? I could not find this information online anywhere. Thnx

[@mixwithjerry]

You could assign it to a mixer track and render that to a wav file (arm the mixer track to record, then go to top left of mixer and select disk recording) or just export that specific pattern. Then bring that audio file back into your project and load it in a plugin called SliceX that comes with FL Studio. This plugin allows you to chop an audio file and assign it to a single note on the piano roll.

[@The_JP251]

@@mixwithjerry Best answer(s).Thanks a lot. I appreciate it. I use Edison plugin or Audacity to chop wav files and then bring them back into single FL Studio channels in the sequencer when needed. I use FL 8 and FL 9 and am going to try the SliceX and the method you mentioned using the mixer. Thanks again =o)

[@joniiimz8039]

I have a problem and it is that when I am listening to a sound in a loop and put another one on top to see how it would sound, it glitches and starts to backfire at the time I play it but after several times the backfire disappears. And another problem I have is that if I have several sounds from different plugins, I don't know if it's because of the plugins or why it will be, but it depends on what it is, it also backfires. If you help me you are my savior. I don't know if it helps but I do it from a Macbook and I don't have a sound system only my headphones… I use the translator im spanish :)

[@mixwithjerry]

What audio device are you selecting in the FL Studio settings tab? And what buffer size are you selecting? Those will likely be the cause of your computer glitching

[@qdcreative4469]

thank u!

[@SEDEGRUBERTH]

thanks bro

[@DickensBlessingMedia]

Hello, I have a problem. When I master my song and then exports, the song turns out to have low volume.. is there a fix to this?

[@mixwithjerry]

Well there’s really so much that goes into getting a loud song and it all starts way before mastering or exporting. Gain staging, EQ, Compression, Saturation, Parallel Compression, Limiting are all things that will help you get there.

[@DickensBlessingMedia]

@@mixwithjerry See, before I did not have to do anything, the song just turned out loud as it should but now it is a different story..

[@Young2bans]

Good info

[@sorry11303]

What kind of laptop or PC are you using for the settings? If you don't mind me asking.

[@mixwithjerry]

I built my own PC.. 32gb of ram, 1 TB SSD storage for running windows, FL studio, and plugins. Then I have 2TB SSD storage for files and projects. It is powered by an AMD Ryzen 2700 processor.

[@sorry11303]

@@mixwithjerry thank you

[@mphowaleed8331]

How do you save a song when you are done ✔ 🤔

[@mixwithjerry]

File -> Save

[@mphowaleed8331]

Ok cool

[@lkd5642]

Thank you

[@0kClive]

i need help because my fl was buggin last night so I had to reset my setting but when I record my vocals they don't sound as clear as they were and they sound staticy now how can I fixz this

[@mixwithjerry]

It honestly could be a variety of things. Are you using an interface/preamp or a usb mic?

[@0kClive]

@@mixwithjerry usb mic

[@mixwithjerry]

@@0kClive most USB mics won’t be able to give clean gain or level for the mic. I’d suggest looking into getting a interface and an XLR mic. Audient iD4 and a Audio Technica AT2035 is a really good combo for the price. As far as the settings go… it wasn’t making a humming or static noise before?

[@0kClive]

@@mixwithjerry no it wasnt it was really clear but I unplugged it and plugged it back in and that seemed to be the problem so Its fixed now but i will definitely be switching to an xlr system in the future

[@mixwithjerry]

@@0kClive awesome. I have a video on my page comparing a $100 mic to a $1000 mic where you can hear audio samples of the Audio Technica

[@DANNYGATESTHEAGEDSINGER]

What you were showing is interesting but it doesn't really tell me anything what I want to know what I want to know is if I remix my original music will this will it take my original vocals out lyrics out

[@mixwithjerry]

Are you asking how to remix a song to take the vocals out?

[@theegilgamesh5420]

Hey Brother,Great content,,,Big question 🙋‍♂️ How do you use the sounds from the Akai mini play ,,to fl studios on piano roll??Much appreciate your info🩸👊🏻

[@mixwithjerry]

I’m not completely sure if this is possible. I think you’d have to record directly to the playlist.

[@rileyortman1872]

ur a god ty

[@rigz1980]

My fl studio just freezes when i’m going through a project and i don’t know why

[@mixwithjerry]

Might be your computer specs.. if you have a lot of sounds and plugins loaded then your computer might not be able to process everything.. 16gb of ram will help and also I’d suggest having FL Studio installed on a separate disk than the disk you save all your files to so that your hard drive can focus on only running FL.

[@imfleo]

Actually, ngl this is a very useful add (even tho I don’t have FL Studio on computer)

[@Rzn8B58]

if you value your sanity do not click 'auto close' it will stop playback when you adjust something like ott or an eq, which is very annoying because you need to hear what your doing when you make a change or turn a knob.

[@pradeepbaswala9953]

Bhut acha h me india

[@dannydean9465]

All that and we barely changed any settings 😭

[@mixwithjerry]

It’s all dependent on your computer. I’m just trying to help explain each setting for the viewer. Sample rate, bit depth, buffer length, etc.

[@aubreymontyf.l.3766]

You look like Tiesto

[@aarishsingh9251]

Zoe

[@therealjnabe]

Thank you so much for this video!

[@tsuk2210]

Thank you

[@SlavaBofficial]

Thank you for this❤