The Best Cheap Alternative to Canon RF to EF adapter! Meike RF Adapter Review & Giveaway

[@PaulJakob]

Are you adapting EF lenses to the RF mount system? If you are considering it, but have questions...ask me!

[@alicao8207]

how was the af focus speed compares to the original one? it is really hard to get the canon ones in UK right now.

[@PaulJakob]

@@alicao8207 good question. I didn’t notice a difference. Autofocus can be hard to gauge on exact outcomes but from my basic tests it seemed to be on par. I’d suggest getting one while you wait for the canon. Good luck!

[@PaulJakob]

@Православие Детям great question. I don’t have those lenses specifically. But it seems to work with the 17-55. I’ll test once I can get my hands on more EF s lenses. Thanks for asking.

[@ZEROMENTEDR]

Does it work with the EOS RP? / If the answer is yes. Do you have a video test or something?

[@PaulJakob]

@@ZEROMENTEDR I don’t have an rp. But the one time I tried, it was fine. It also worked on the R6 and R5.

[@ianbenedictos3310]

it should be EF-EOS R adapter.. not RF-EF ADAPTER...

[@GunplaTAPTI]

Hi! I'm using the canon r100, paired with canon efs 55-250mm stm lens throug meike ef- eos r adapter. however, when I adjust the aperture (55mm f4 to f4.5, or 250mm f5.6 to f6.3) it shows an error 1, faulty connection. check connection between lens, mount adapter or camera. hope you can help. I don't have any lens to test.

[@PaulJakob]

I'm sorry I don't know. It could be so many different things. The first thing is to make sure all the connect points are clean. So far mine has been fine with any lens I've used. Also, try to take off the lens and the adapter and re-attach it all. Good luck!

[@arthur3038]

in the meantime i am searching for an adapter the other way around (if exists)...because i have some (specilized) RF lenses and would like to mount them on EF Cameras.. and pls don't ask why.. i just would like to...

[@zhoutong1110]

how does it coordinate lense IS with IBIS systems in R6 R5？thanks a lot

[@PaulJakob]

That's a great question. It states that it works as it would with the normal Canon adapter. I have not tested it extensively.

[@PaulHartyanszky]

Does image stabilization still work correctly when using the Meike adapter to mount an EF lens to an RF body?

[@PaulJakob]

Yes from my quick tests it was exactly the same. I personally don’t use the digital IS that often so I can’t say if it’s flawless. But from what I could tell it was the same. Hope this helps. I always suggest getting the canon adapter, but they are in short supply so this is a great placeholder until you can snag one.

[@Adamnesss]

Have u had issues in shooting backlit situations? I've read online that it has glare or flare in the photo. Would you try a review on that? Thank you

[@PaulJakob]

I have not had that issue. I find glare and flare are usually have more to do with the lens. I never noticed anything out of the ordinary with it. One thing to note, I do find that mirrorless cameras do have more trouble finding focus in backlit situations. I've seen this on the r, rp, r5, r6, and Sony a73, a7s2, and 3.

[@Adamnesss]

@@PaulJakob ohhh. That's interesting to note. I just got my R and I have no adapter so I'm thinking of getting this while canon is not available

[@Adamnesss]

@@PaulJakob and thanks for your reply 🙏

[@andreineagu.online]

What are some differences that you can encounter between the original Canon adapter vs a 3rd party one like Meike?

[@PaulJakob]

Other than the build like I show in the video, nothing as far as performance. It seems to work the same. I haven’t tested it with many lenses so it’s hard to tell.

[@adokapo]

Buy one of those for every lens.

[@grzechkania]

That was a good intro joke haha. Thanks for the video. I can't got the canon adapter.

[@ZEROMENTEDR]

I recently ordered an EOS RP bundle and the CANON RF to EF adapter but is in backorder (i don't see any of them anywhere), can someone tell me if the Meike RF works with the RP. I think I will have to buy a 3rd party alternative (like this one that you're mentioning) until de canons one arrives.

[@PaulJakob]

Congrats on the new camera! Yes it will work. My brief testing it was 100% functional just like the canon. I’d order one ASAP. I think the shortage is going to last a while and the third party ones will be hard to find too.

[@olegasphoto]

Perfect intro

[@jayMary817]

I have a canon EOSR camera and I am currently having a hard time trying to find an adapter for the tamron so G2 Any suggestions

[@PaulJakob]

Is that an EF tamron lens?

[@jertexjertex7880]

Thanks for the video, I just ordered an R5 and, of course, the Canon adapter still isn't available, but hey, B&H says it's coming soon, just like they've all said for months. I have the Canon basic adapter on backorder and plan on keeping this one as a backup.

[@PaulJakob]

Thanks for watching! It never hurts to have an extra adapter. Check out the canon official website too. They keep showing up. That R5 is awesome. Enjoy the new camera!

[@linkinjunior]

Meike Metal Lens Adapter MK-EFTR-A for Canon EF/EF-S Vs MK-EFTR-B for Canon EF/EF-S The MK-EFTR-B lists Image stabilization support. Does that indicate lenses with IS work better with the MK-EFTR-B?

[@rafaelthewizard]

Love the intro lol haha

[@frederick-DIY]

Great video! As far as adapting lenses, have you heard anything about whether the different types of AF motors in EF glass have effects on whether the lens focuses as well when adapted to the RF cameras? With Canon having had something like 7 different types of AF motors in the EF line, it would be an interesting comparison.

[@PaulJakob]

Thanks Frederick! That’s a good question. My best encounters with different af motors is I have had some work recently where I used the R5, R6, 1dx2 and 5d4. I mixed it up with all sorts of lenses like ef L with the usm, the Newer usm, the tamron lenses and sigma. All of them worked exactly the same. The only note would be, the cameras more advanced AF had a positive change to how sticky the AF felt. In conclusion, the adapted lenses all worked as well if not better with the new cams even with the adapter. My tests were not in a controlled situation, but in real life high pressure paid shooting situations. Thanks for watching the vid! I have some new stuff coming soon. More adapter talk!

[@frederick-DIY]

@@PaulJakob That's particularly impressive that even the adapted third party glass worked better adapted than on the EF system. Thanks for the insight!

[@PaulJakob]

@@frederick-DIY I really like the canon ND adapter. It adds so much functionality with the drop in too. Once you decide and get shooting, let me know how it’s going!

[@frederick-DIY]

@@PaulJakob You bet! I'm mostly looking at the cheaper third party adapters since I don't use ND filters in my own shooting. I'm in the process of switching over from the EF system (1Ds Mk. II and a 50/1.4), and my initial setup is an RP with the RF 50/1.8. Since the RP is the first camera I've owned that does in-body lens correction though, I'm particularly interested in adapting some of the older EF glass for which the RF system doesn't yet give a size advantage (I shoot almost entirely street photography so having a small and unobtrusive kit is very important).

[@missjerseyz2008]

Im using the Viltrox on my canon rp. Happy with it so far.

[@PaulJakob]

I need to try that one. I always love to have some extra adapters around!

[@KaReEdCa]

Great review man. I'm considering these as well. Any issues with glare whe. Shooting into light? I see the JJC branded one seems to have a flat interior causing flares... This one seems to have steps inside the vosy... Similar but smaller than the Canon one.

[@PaulJakob]

I haven’t had any issues with glare. But also I shoot mainly in controlled situations with all modified lights. I’ll have to try. My main suggestion is if you can’t get your hands on a Canon adapter during the shortage, get this while you wait! The steps are so similar, you are correct. Thanks for watching Carlos! I hope to get some more videos up soon.

[@KaReEdCa]

BTW, meike Amazon picked up your review for their video

[@PaulJakob]

Oh no way! Awesome I’ll have to look!

[@DonKangolJones]

Thanks for the video, I’m having issues w/ my control ring adapter, and might need to take it in to be serviced or replaced, and this cheap alternative would be a nice alternative. When it comes to photography, I just love the process of making an idea come to life, whether it be portrait or still life.

[@PaulJakob]

DonKangolJones awesome! Stinks to hear the control ring isn’t working. This may be a good in between while you wait. And I agree. Capturing a moment and sharing it with others is the best. Thanks for watching!

[@sunnyrocks2]

This was just the video I was looking for to help me choose an adaptor for my prospect EOS RP. Asking a friend to get it from U.S. and am already out of budget. Hope it helps me with travel videos. Thanks for video. You deserve a lot many subs.

[@PaulJakob]

The RP is a great camera! Where are you from? Thanks for the feedback! New videos coming soon!

[@sunnyrocks2]

@Paul Jakob From the Himalayas in India. And yeah, RP definitely seems like a good buy. And it's perfect time to buy stuff.

[@spordniar]

Great video! I own the Viltrox one. I am curious if you can do a comparison of 1. how snugglish the 3rd party mounts compared to the original canon one and 2. compare the internal step rings, which from what I can see, Canon's has some irregular inner side thread extinctions, while Viltrox has this uniform inner threads (the inner groves), not sure if they will influence photo optics to any extend.

[@PaulJakob]

Thanks Paul! So first point. It’s as tight as the canon adapter. That being said, I find the adapters to be a little loose in general. The internal steps are similar to canon but maybe more even. I noticed no difference in image from the two. Some people have mentioned if they are not spaced correct it creates extra (unwanted) flare. I hope this helps. These adapters are so reliable compared to adapters even just a few years ago!

[@spordniar]

Paul Jakob thanks! Yeah Viltrox’ inner threads were even too, so I was wondering why Canon put some irregularly shaped thread inside, there must be a reason for it, but I guess we will never know.

[@ericsamuels6250]

I love all kind of art

[@PaulJakob]

eric samuels awesome! I agree. Art in all forms is a special thing.

[@ugurozdemir6573]

😂 Good intro and excellent review thank you - helps alot. Really wanted a canon branded adapter but all sold out here in the UK too..

[@PaulJakob]

Thanks for watching! I’d suggest picking one up and then when a canon one comes available snag it. The control ring adapter is great too. I had a shoot this week where I was thankful to have the extra adapter. Are you on the R, RP, R6 or R5?

[@ugurozdemir6573]

I have the R6. Actually received it yesterday and realised (surprised) I couldn’t find the canon adapter anywhere.. I don’t usually go with non oem products (trust issues :)) but seems like I don’t really have a choice here.. The video has helped alot though - thank you. I can’t wait to start playing around with the R6!

[@inkythecattv5601]

Love how every assignment is different with its own challenges and problem solving to create the best content for my clients.

[@PaulJakob]

Bob Johnson couldn’t agree more! It’s so satisfying when the images turn out...even after a challenging shoot!

[@uptownphotography]

Is there any loss of light using the EF to RF adapter? If yes, how many stops please? Thanks as always... Philip NYC Area

[@PaulJakob]

None at all. I compared my 5d4 with the ef 24-70 2.8 L mk2 then put the same lens on the Eos R with the adapter and the image was exactly the same. The adapter is a simple design. Mainly just adding space between the body and the back glass. Hope this helps.

[@uptownphotography]

@@PaulJakob Yes very helpful Paul. I appreciate it. I plan on buying the R5 as soon as the wedding market picks up here in NJ. (Right now I am using the 5D4 and have a 5D3 for backup). I don't want to lose the use of my EF L series lenses, so that is why I asked the question regarding any loss of light using the adapter. BTW: I have been in that scenario trying to get out of NYC with the tunnels all backed up. Brutal! Phil NYC Area (Jersey Shore)

[@PaulJakob]

@@uptownphotography Those tunnels...ugh! I switched to RF bodies and had the same situation with not wanting to change the lenses. My suggestion is to pick up a couple canon adapters, and one of the meike. It's great to have an extra on hand. You will love the R5. It's a fantastic camera. The R6 is also killer.

[@uptownphotography]

@@PaulJakob Do you experience using the adapter with the control ring. Wondering if it's worth the extra $100 to have that feature...

[@PaulJakob]

@@uptownphotography I have it on my rf lenses and I have yet to find it useful. But it’s a neat feature. If I was shooting weddings I may be more interested to have the extra ability to control settings quickly.

[@jokubasvaicius]

Great video, good job! Thanks

[@GaleForceAdventures]

Aloha from Kaua’i! I am Pall Gale of GaleForce Adventures. I moved here from NYC where I still have my apt in Chelsea. MAHALO (Thank you) for all the great info! I subscribed even before you mentioned the great give away! My Canon R is on its way and this adapted is a necessity for me because What I love about shooting people or just the beauty here is being able to create lasting memories for my guests when they visit this magical island , often for a momentous occasion! That will begin again this Friday as we open the island without quarantine for visitors with a negative Covid test. You should come and I’ll take you on an adventure :) Meanwhile I will be in NYC in a few weeks so if I am lucky enough to be chosen, my 8th Ave address would work. Again, thanks for the great run down! Ahui Ho, Your new pal, Pall!

[@PaulJakob]

Thanks for the sub!!! I may have to come out for an adventure for sure! Enjoy the camera. It's fantastic. Thanks for entering too!

[@rafalbaker9730]

Hey bro, please tell me if i use sigma 35 1.4 art in canon 6d...when i buy canon r6 with adapter then will be the same 35? Or work like 35 x 0,7 like a crop?

[@PaulJakob]

This is a great question. So the sigma 35mm art is a full frame lens. The adapter adapts exactly straight across. So it is 35mm full frame in camera mode and in video it is the same. So the field of view would be very close if not the same as your 6d. Full frame ef adapts to full frame adapted. Now the only time there is a crop on the R6 is in 4k60. It’s like .1 (almost nothing) and in 120 fps (same). I hope this helps!

[@joaovtaveira]

What about the RF EF adpter with the control ring? Have you ever tried it? I think that is a ingenious idea. By the way, using a circular polariser inside the adapter should also be great. Have you ever tried that too?

[@PaulJakob]

I'm so sorry I didn't see this comment when you made it. I tried the control ring and it's great. If you're needing an extra option for an adjustment setting control it's a cool concept. I have yet to use the polarizer in the drop-in. I want to try it for sure! Thanks for watching and for the comment!

[@AlexArdenti]

It should work on the new Canon C70 then also, correct?

[@PaulJakob]

I happen to have a c70 on hand...I’ll test!

[@jburnettproductions]

@@PaulJakob Would like to hear if it works with the C70. I've already had to return the Viltrox and now the Fotodiox. Third times the charm with Meike?

[@PaulJakob]

@@jburnettproductions I will test tomorrow. Are you against getting the Canon adapter? or is it an availability issue?

[@jburnettproductions]

@@PaulJakob Awesome, can't wait! I'm not against it at all but yea availability is the issue.

[@PaulJakob]

@@jburnettproductions if you’re in the US the canon website has been getting them in stock almost every day. Sell quick but they are coming back.

[@treyrobinson9250]

Hello i wanted to know if this adapter would work with the Rp?

[@PaulJakob]

It does! It will work as well as it does with the R.

[@treyrobinson9250]

@@PaulJakob Thanks so much i just ordered it!

[@PaulJakob]

@@treyrobinson9250 awesome! Enjoy!

[@LuiLimaStudios]

Do the adapters crop the image?

[@PaulJakob]

No, they don't.

[@michaelranger9104]

by adding a adapter are you not altering the distance from the last glass element of the lens to the sensor like adding a extension tube to a system ? if this is correct what is the equiverlant extension tube rating? may be a silly question. thanks

[@PaulJakob]

It’s not adding any additional space. Its measured to be exact space to a dslr. That’s why the ef lenses adapt perfectly. So, a 24mm lens will be a 24mm lens on the R system camera if it’s a full frame camera.

[@michaelranger9104]

@@PaulJakob thank you for the clarification much appreciated

[@AnilKumar-uo5id]

It's suitable for canon m50??

[@PaulJakob]

It is not. EfM doesn’t have an RF adapter yet.

[@leexviewschannel7810]

What is suitable for m50 ?

[@dakotahreviews]

I just ordered this adapter for my eos R

[@PaulJakob]

Awesome! It’s a great tool. Are you going to get some RF lenses at some point or stick with ef on the R? Enjoy!