The best Range Rover Classic interior upgrade, leather wrapped door cards

In this video I show you how I cover a set of Range Rover Classic door cards in leather.
I explain why I use the glue that I use.
Leather: www.ukhide.co.uk
Glue: www.thegluepeople.co.uk/canis...
Steamer: jiffysteamer.co.uk/shop/jiffy...

[@timbo1863]

You sent me here and I’m not dissappointed ! Awesome and informative ! Thankyou 😊

[@coastalcushionco8227]

Your welcome

[@Ash-po9jr]

Wow! Fantastic - Best of British Craftsmanship

[@coastalcushionco8227]

Thanks for that Ash

[@geoffjordan1254]

fantastic. All done without any sewing!

[@coastalcushionco8227]

Thank you! 😊

[@saltiresam]

Cracking job!

[@coastalcushionco8227]

Thanks Richard

[@customstitchd]

Very impressive. Nice idea with the hot knife to create more of a gap for the leather 👍

[@coastalcushionco8227]

I tried to cut the groove with a saw and a knife on the previous set, but that was a bit if a faff. The hot knife did a much better job

[@customstitchd]

@@coastalcushionco8227 I looked into the suppliers of the glue you used on these cards today. Who do you buy from?

[@coastalcushionco8227]

@@customstitchd www.thegluepeople.co.uk/

[@customstitchd]

@@coastalcushionco8227 Have you tried tensogrip L71, Ive been told its a similar product?

[@coastalcushionco8227]

@@customstitchd I haven't used it but it looks very similar, I has a shorter working time but comes in 22L, so is a little bit cheeper. If you try it let me know how you get on with it. I may give it a try when my T 30 runs out.

[@trevindavid289]

stellar job!

[@coastalcushionco8227]

thanks

[@davidblackburn6569]

fantastic

[@coastalcushionco8227]

Thank you

[@davidblackburn6569]

i also meant to say that i have learnt a reason why the roof lining came down on mr range rover camper

[@coastalcushionco8227]

Wrong glue?

[@davidblackburn6569]

hi yes it looks to be the problem ,the glue its stuck solid to the roof but the lining that i used has become unstuck to the glue and the front of the lining has slowly separated from its backing so iv had to pull it out , i did use a high temp trim glue but it appears not the right one

[@coastalcushionco8227]

You can buy the correct glue in one litre tins but isn’t a spray glue