The BIGGEST mistake while using a back tension release! (help your target panic)

1 Timothy 6:11
THANK YOU FOR WATCHING!! Make sure to make sure to like, comment, and SUBSCRIBE to stay up to date on all of these videos! I appreciate you guys!
In the meantime, check out my instagram: / joshua_douglas_

[@Jalexander61]

Hey Joshua, digging the channel… I’m running a Hoyt Alpha X 33 in Wilderness, 29” / 62#, QAD Hoyt drop away rest, Spot Hogg pic sight, 6” Hoyt front stab w/ go sticks, 8” Hoyt rear bar… Hamskea Raptor peep,,, Easton Sonic 6 arrows, #23 dloop, Ultraview Button & Hinge 2… think I’m still punching the hinge but getting better. Takes practice!

[@MrPretendingtowork]

2024 Bear Alaskan XT. Still kitting it out. Right now just cheap Amazon crap till I can get back to the shop and finish it up.

[@stevestone5903]

Like the channel from first impressions. Hope to see content that will be helpful to myself and others that are fairly new (7 months here) and in the exploring what works best mode. Currently shooting a PSE Fortus 33. I probably enjoy building my own arrows better than shooting. Love the science involved, FOC… weight of the arrow, vane size etc. my fav shaft is the Easton Sonic 6.0. Very light shaft and cheep enough that you’re not devastated if you blow one up shooting a ground squirrel at 100yds in the middle of a pile of rocks at a TAC event. I’ve went from an index release to barrel (target panic city!!) to now shooting a resistance release (end of target panic). Still a learning curve for sure. Hopefully your channel will touch on things like this and delineate the pros and cons. Why each might help or hurt.. etc.. Anyway .. sorry for a War And Peace dissertation but really happy and hopeful your channel breaks the noms.

[@joshuadouglasarchery]

Thank you for the support! Sounds like you have a killer setup, I am looking to make a video comparing releases and another talking target panic!

[@wesb4060]

blackout faze with stock sight, quiver, and stabilizers. added a QAD ultra restt hunter and a new custom wrist sling. shooting blackout x5 envy with easy pull 100gr feild tips and QAD exodus broadheads. 332gr arrow weight with 60 lbs draw weight ( I am 15) been shooting for 8 months. highly recomend to you new shooters to learn how to get a surpris release it realy helped me. I am getting 7 inch groups at 70 yds.

[@joshuadouglasarchery]

Love it!!

[@wesb4060]

thank you. what would be a good budget site.

[@johnarcher9480]

Similar to how I use one. My click goes off when I hit all my anchors. To start the shot process, I take my thumb off the peg, and basically touch my thumb and pinky together. Do that and you will see how the finger want to rotate the hinge. A good demonstration of this, by a far better archer than I would be watching any footage of Erika Anschutz/Jones. The benefit of this is that you don’t feel the movement. Your hand structure makes that rotation happen without having to think about motion at all. Its not tension so much, as just touching your thumb to your pinky.

[@joshuadouglasarchery]

I’ll have to try it!

[@johnarcher9480]

@@joshuadouglasarchery kzbin.info/www/bejne/moGwi39qpah1qcUsi=3LKYU6apWFR6Oidb 4:35

[@BY-dq3mt]

Video idea - an explanation of proper nock fit, when there is a need to either change to a different nock and/or reserve the bowstring and, if necessary, how to remove and install a new center serving. I was listening to a podcast the other day and this topic came up and it was confusing to me. I also recall Chris Bee reserving a brand new bow string in one of his Mathews bow build videos. Thanks!

[@joshuadouglasarchery]

I like the sound of a video like that, thanks!

[@ElementONE15]

PSE Domduo 40 s2, with nockon UV grip, shibuya cpx 3 sight, shibuya occulus 32mm scope, feathervision 8x verde plus lens, podium peep with deluxe kit, hamskea epsilon rest, fuse carbon blade 30" and 12" stabs, tru ball blade pro flex release, pierce tour for outdoor, and x23 for indoor.

[@brandonsmith-er8ig]

Yo love your videos! Great content. Currently dont have a bow. Dont have the money right now for one but cant get enough of your videos!!!

[@joshuadouglasarchery]

I appreciate the support, boss! Praying you come across the means/have a situation occur to get a bow in your hands soon! If, and hopefully when, that happens don’t hesitate to reach out with any questions! Thank you again for watching!

[@brandonsmith-er8ig]

@@joshuadouglasarchery is there a really good budget set up worth getting. including a good release.

[@joshuadouglasarchery]

@@brandonsmith-er8ig depending on your specs on draw length, I’d say a bear legit would be a good bow if you’re looking for something to get you into shooting! For a release, on the cheap but quality side, the assassin from truball is a great wrist release!

[@novascotiapsearcher4497]

Current setup is a PSE Xpedite NXT at 70lbs 30in dl. Running a Spot Hogg Fast Eddie XL with a UV3XL scope with a 6X X-Shot lens and a specialty archery hunter peep with a clarifier. My rest is a CBE Defy drop away. I have a 15in wickstick out front and a 12in wickstick back bar. I shoot Black Eagle X-Impacts with the steel FOCOS outserts with 3 AAE MAX Stealth Vanes at a 3 degree left offset. For 3D season these arrows weigh 470gr @ 312fps and during hunting season they are tipped with Crimson Talon 125gr single bevel Crocs with a total weight of 495gr at 307 fps. I rotate between 3 different releases. UV Stainless Button, TruBall Abyss X-Tension Flex and a B3 BGPRO.

[@kalvinhutchins3704]

2024 Bear Adapt Plus. Got the ready to hunt package. Upgraded the peep to an aluminum 1/4". 28.5" draw length. 65# draw weight. Shoots 266.4fps. Shooting black eagle carnivore 350. 28" arrow. Shwacker 100gn 2" broadhead. Also using the trophy ridge sync drop away rest amd the precise thumb release.

[@joshuadouglasarchery]

Sounds like a killer rig!

[@Rikcey]

2023 PSE Fortis 33 S2 60# 28,5" DL, upgraded with Titanium archery products rollerslide, stringstop and drawstop. Still on stock strings but already have Threadz custom strings. For releases I run Stan Onnex, a resistance for training and in the field a Clicker and a backup Clicker set as a regular Thumb button. Hamskea Trinity (hunter pro with the launcher overmolding replaced with bandaid tape) Hamskea insight peep with, depending on light the 3 biggest aperture in the kit. Spot Hogg Hogg Father with a LE Matte Black UV3 scope. With, depending on which kind of competition a 0.019 double pin, or a 0.019 or 0.010 single pin cartridge with a 3x Specialty Archery Excalibur lens. For stabs I run a 12" side bar with 10 ounces, and depending on which use, a 28" with 6 or a 15" with 8 ounces in the lower bushing. All three are Avalon Tec x Maxx. Running the stock lower dampener in the regular stab bushing holding my Easton stiffy wrist sling. Shooting Black Eagle Rampage 350/0.001 at 27" with 2.1" Q2i fusion vanes with a slight offset. Beiter Hunter 204 nock. Stock 50gr insert and 100gr Saunders Combo field point. Total weight 410gr. Bow does 281 fps with them. For indoor Easton x23 2315, 27" 120gr pro point 4 fletch Bohning zen vanes also running Beiter hunter nocks 245. 550-ish grain, no idea what speed (it's indoor.....) It's a mouthful, but I think I covered it all.

[@MicahGitlewski-qs1qq]

Bowtech cp30 at 27 In and 70lb carbon express d stroyer sd blazer vanes 450 gr true fire hinge

[@resiststatism8962]

Black Phase 4 29, CBE CX-5 with Bridgelock adapter, CBE adapt quiver, QAD ultrarest, 8'' Flatline stab. Scott Quick Shot. Easton Axis 5mm 520 gr.

[@Joelfrickinjohnson]

Bowtech carbon one x dialed 3 pin .010 vapor trail rest anhilator broadheads and victory rips SS also I need that hunting bracket for the hinge 😂

[@brandonpatterson5705]

2020 blackout Epic it’s a Bear Paradox riser and Limbs with the new EKO cam system. Victory Mamba arrows 426gr with Grim Reaper pro cut 125s 70#s with QAD ultra rest and EZV sight. And a Axcel Accutouch 41 for 3d

[@leelaporte9959]

My set up is a PSE Brute ATK set @-#70 I have a 29" draw running a single pin slider sight into the woods this year I use a Spot Hogg whipper snapper hand held 3 finger release & my current arrow set up is some custom built WarHead Exothermic's W/100g ridding upfront a TAW is 496g

[@joshuadouglasarchery]

Sounds like a great set up! I really liked the look of the brute ATK when it came out!

[@ZacPalus-zr9hh]

I'm shooting a Mathews V3X 29 @ 28" 75 lb. QAD Integrate rest, HHA Tetra Tournament 4-pin. Lowpro detachable quiver. and Victory Vap 300 spine cut at 26.75" with AAE IP 4 nocks and 4 Bohning heat vanes (416 gn) for TAC practice and deer and antelope hunting. And for elk a Victory Vap TKO same length with 3 AAE max hunter vanes with a max helical(445 gn). For Releases I'm using the Ultraview Hinge 2 and Button both in aluminum.

[@joshuadouglasarchery]

Killer rig!

[@chris_f_eden]

Bowtech Core SR, Bowtech Cemtermass Pro Hunter 5 pin, Bowtech Cemtermass 12” stabilizer Hampskea Epsilon, Tru-fire Synapse. Next will be backbar

[@fit4thepursuit221]

I'm shooting a Mathews phase 4 LH. With a HHA tetra ryze 2 pin in. I have the raptor peep sight. I am having trouble with my windage. Not able to get it set. It's basically really far left. I don't know what to do to fix the issue.

[@joshuadouglasarchery]

Are you running it through the bridge lock?

[@fit4thepursuit221]

Yes

[@joshuadouglasarchery]

@@fit4thepursuit221 that may be it, maybe look into the bridge lock bracket! That or it could be a tune issue

[@fit4thepursuit221]

I will check into that. Thanks.

[@user-ox8gq7bt4z]

Mathew’s lift 29.5 60 pounds 12” beestinger front bar and 10” back bar hha tetra QAD drop away a the dove tail and I shoot black eagle rampage 00.1 four fletch X vanes

[@CodyVinson]

Whats a good budget friendly hunting sight?

[@joshuadouglasarchery]

The CBE tactic hybrid is a killer!

[@CodyVinson]

@joshuadouglasarchery I been shooting the blackout, I got 2 questions for ya, do you sacrifice performance going from 80% let off to 90%? Also at full draw seems like it has no valley its like if I relax any at all my letoff goes away