The BIGGEST MOD For My 3RD Generation Toyota Tacoma BEGINS!!

In today's video we finally install the new lift for the Tacoma! I decided to go with an OME kit, with 886x coils and 9000 shocks up front along with a 1/4 inch top plate spacer and SPC upper control arms. This will provide roughly 3 inches up front. I will have a before/after measurements video so stay tuned for the rest of the build for the Tacoma by subscribing to our channel! There was so much footage that I had to break it up, so look for the rear install video coming next!!
Installing the upper control arms on my 3rd gen Tacoma was actually not too hard. The long bolt came right out and we only had to bend the fender liner a little bit. The overall installation of the lift kit struts for the front went in just like factory. If you are thinking of installing a lift kit yourself on a Toyota Tacoma, go for it! Super easy!
I'm excited to put the 33 inch tires on the truck once the lift is installed!
Our Equipment:
Vlog/Action Camera:
Sony Alpha a5100: amzn.to/2Pt5pCS
GoPro Hero 8: amzn.to/2Qvg5Q2
GoPro Hero 7: amzn.to/2NHSyKz
Music From:
www.epidemicsound.com
#toyotatacoma #tacomaliftkitinstall #toyotatacomaliftkit #liftkitinstall #tacomaucainstall #3rdgentacomaliftinstall

[@khrisrosario8872]

I know this is 4 years old but dang it. I was screaming at the TV for you to GREASE the ball joint!!!!!! Other than that fantastic video really enjoyed watching this. I can’t wait for my 2023 Tacoma to arrive I’m so excited to start modding it the moment it hits my driveway!!!

[@BrosFOURRSpeed]

If I didn’t show it in this video, I did in another one! And that’s awesome! You’ll definitely enjoy it!!

[@Theyralltakenfu]

I just had Bilsteins and Coils put on my 06 4Runner Sport and trust me, it was costly because I had all 4 done. I can appreciate the time and know how they have putting this together. I just wish I had the know how in order to do it. I do my tune-ups, but that's about my limit, because honestly, I just don't trust myself doing anything like this. Great job.

[@BrosFOURRSpeed]

Thanks! I can only imagine trying to put all the coils together! I'm glad I had them done already, made it a lot simpler.

[@SC_XOLOs]

@10:49 😂 love the hammer.. I can tell these guys are real DIY’rs. Look at their tools. Great video. Came out awesome 👏🏼

[@ChrisTripp]

4:11 When your link kit has now become a tie rod end lol

[@BrosFOURRSpeed]

hahah misspoke ;)

[@jimbubba31]

Why am I watching David Spades brother lift a Tacoma? 🤔

[@iantru9929]

David spade looks like a man child who could pass for a little woman

[@Forestlakes23]

Link to this lift kit?

[@David-fh3ch]

Did you purchase the lift kit with the top hat already installed? Or did you have to install them yourself?

[@BrosFOURRSpeed]

I ordered the suspension already put together if that's what you mean. So they came ready to install, I just needed to put the top plate spacer on top and put it into the truck!

[@David-fh3ch]

@@BrosFOURRSpeed do you remember what site you bought the kit from? I’m probably going to order one when my tax return hits 🤣

[@BrosFOURRSpeed]

@@David-fh3ch From headstrong off-road! Here’s more details on the kit! kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@fotomotoxxiii]

The "taco lean" you speak of is based on incorrect install of side specific springs. Most shops have no clue. OME makes side specific springs for toyota to accommodate drivers weight and fuel tank. So it sits leveled with full tank and driver in truck. I had 2 shops install my 4runner springs incorrectly causing a lean to drivers side. When swapped the lean is gone. This term became about as if its toyotas design flaw, rather user error.

[@BrosFOURRSpeed]

Ahh ok thanks for the explanation on that, I've never done full coils before on a lift, so I wasn't entirely sure.

[@fotomotoxxiii]

@@BrosFOURRSpeed you guys did a great job on the install. Good attention to detail and everything. You mention you never had a taco lean is because either was stock suspension or properly installed lift. Either way if theres a lean theres a problem haha. Looking forward to finished truck!

[@SugmaDLigmaNutz]

So you dont think Toyota made an error by not balancing the truck more? I think its pretty obvious that the battery, driver and fuel tank are the heaviest.

[@mukkasaurus]

@@SugmaDLigmaNutz LOL.... Exactly. My last two Tacomas, which I purchased new, have the lean. It's Toyota's problem.

[@whatfreedom7]

I thought my stock 06 felt like it leaned left a little and my fire always looked bulged more on that side but I thought it was my imagination. Now I’m going to have to measure and see for sure.

[@singletrackftw]

Just FYI you kept saying “tie rod” but that was the sway bar. Either way. Nice job! Props for getting it done yourselves

[@BrosFOURRSpeed]

singletrackftw Gotcha lol. I meant end links 😅

[@singletrackftw]

Bros FOURR Speed no prob!!!

[@chrisginoc]

@@BrosFOURRSpeed Huge props for doing it at home. Everyone i know always pays and the labor costs and fees local shops in California are chargi are INSANE. Would you say this is doable for a total rookie?

[@BrosFOURRSpeed]

@@chrisginoc I'd say it's pretty doable for anyone. I really can't see throwing money at a 'professional' to do this since it's so basic. It was a fun project to tackle!

[@Lexusgx550]

What kind and how many inches suspension lift did you install ? And why you didn’t use kings or fox?

[@BrosFOURRSpeed]

This is an OME lift kit, I got about 3.5'' up front and 3'' in the rear. I didn't go with King or Fox because you are just paying for the name. While they are good and reputable, I spent 1/3 the price and have zero regrets with this kit! I still have it and truck rides great and performs well off road! Expensive kits aren't always the best route when you can get similar performance for less!

[@surfteam10]

if this job can be done with those harbor freight tools, then that means there is hope. lol

[@slvrbakslpz4690]

After a year how is this suspension kit holding? I read that the OME front coil springs start to sag and the leaf spring squeak.

[@BrosFOURRSpeed]

It's great! I haven't had any sagging and even my stock springs squeaked, that was mainly from offroading and getting dirt and all that in them. These don't squeak so I don't have any issues with it.

[@timmymartin4749]

The yota gonna look sick

[@BrosFOURRSpeed]

oh yeah!!

[@daviddrennan1759]

Wow I literally just installed this same setup on my wife's 4runner. It's awesome to say the least

[@BrosFOURRSpeed]

David Drennan Nice!! I bet the 4Runner looks sick!

[@jossuemorales8920]

hey my friends, I just installed that lift kit too, you guys helped me a lot to decide . I have some issues, the first one I have a little vibration on the back differential, I ordered the driveline shim 3* to correct the angle, I hope this work. I also buyed the toytec TP14 spacer (1/4") to correct the front lift. Do you really recommend a spacer on the front? After three years with this mod, what is your opinion on OLD MAN EMU suspension lift kit on your Tacoma?

[@BrosFOURRSpeed]

Glad this helped you with your! And I love this kit, it's still riding great with no issues! The vibration in the back I'm not sure about, the shim should help correct that, but I didn't have any issues with mine. I go back and forth on the front differential spacer kit I put on. I'm sure it was fine without it and a lot of people say the 3rd gen tacoma doesn't need it. It was $40 bucks and I still have that installed and just going to keep it on. I don't have a good answer on that, so if you want to install it, it's not crazy expensive to help with the CV angles.

[@jossuemorales8920]

@@BrosFOURRSpeed hi again and what about the front 1/4 inch spacer, any problem with that??

[@jossuemorales8920]

@@BrosFOURRSpeed I also installed the CV drop kit and the vibration is less but still. This weekend I will install 3 degrees shim under the OME leaf spring . 🤞

[@jossuemorales8920]

@@BrosFOURRSpeed I don’t have issues on the front, I took out the Cardan and run my tacoma without it and there is no vibration, the problem is in the rear.

[@tundra-7549]

Looks awesome! Great job guys. Cant wait to see the wheels and tires on the truck.

[@BrosFOURRSpeed]

Callaway0719 Thanks! It’s coming together nicely

[@malcolm1635]

Although my TRD Pro Came with Foxs, Upgrading to the Icon 2.5's with remote resi was one of my favorite mods. Suspension is so crucial you really need to think carefully about it. Good video!

[@jaysondalusong2692]

Did you set your UCA to D setting? And how many lbs of torque did you put on the upper ball joint?

[@j.richardson7416]

After doing all that work does the front end ever feel loose or have any popping or clunking noises? I’m wanting to do a 3\1 level on my Tacoma but afraid the front end will never be as good as factory afterwards.

[@BrosFOURRSpeed]

I will talk about that once everything is done and I have some miles put on everything, so stay tuned for that review!

[@boomlightsout]

Flat Nose Curry don’t use spacers

[@j.richardson7416]

boomlightsout - thanks, No spacers I’ll be used.

[@Wajjajagg]

Flat Nose Curry i have fox 2.5'a with JBA control arms & if u dont greese the ball joints often i hear a poppin & clunking from any turn or bump lmao

[@2291adrian]

Good job guys! It’s really nice seeing the Tacoma back in your videos.

[@BrosFOURRSpeed]

It will be featured a lot for the rest of this year!

[@blackackcl]

So glad you guys gave warnings for the headphones, usually you just bang away and don't realize lol. Nice work guys

[@BrosFOURRSpeed]

Haha yea, it was pretty loud in person too!

[@marcusmendoza9354]

If u end up not like those nitto’s switch too toyo R/T or M/T both are very good I love the R/T they perform well on road and off-road in mud dirt but they do pick up a lot of rocks

[@UncleNucoa]

No torque specs for the new parts, or did you just go with PFT? I like OME products. They will be a strong contender for my lift.

[@BrosFOURRSpeed]

I believe we just did the oem torque spec, this was awhile ago so I can't remember, but definitely torque them!

[@ricardoromero5851]

I have 2019 Toyota Tacoma sr5 4 cylinders I put wheels 10/20 ”I have concern if I will have problems because the original measure is 16” for this tacoma thanks

[@iantru9929]

The first thing i would do with your tacoma is return it to the dealership. Its missing 2 cylinder.

[@ramblerclassicman221]

Please keep all of your stock suspension components, in case you want to return to stock! :)

[@jameshoward3071]

Have you have any vibration or moaning sound start after you installed the lift coming from the needle bearing on the drivers side clam shell where the axcel goes in

[@eddylopez2737]

Did you notice any difference in mpg from when it was stock to what it is now?

[@BrosFOURRSpeed]

It went down about 3mph overall.

[@eddylopez2737]

What exactly did you do to yours in terms of switching and adding parts? When lifting a truck does it messes up other parts such as the transmission, suspension etc... I been wanting to lift my 2018 tacoma but don’t know what kit to get. My goal is similar to yours, I want a more aggressive look to it, higher height, and better feel. Sorry for overwhelming you with all these questions but I really don’t know who else to ask and get an honest answer, I’ve asked some lift shops around my area but I feel as if their answer is more meant to persuade me to purchase one of their products more than answering my questions. Can you please help me out !

[@ericsteele3444]

did you grease your ball joints before you drove anywhere? useally they dont grease them when shipped...

[@BrosFOURRSpeed]

Yeah in our wheel/tire mount vid we did that. So I did put like 20 miles anthem before that unfortunately

[@ericsteele3444]

@@BrosFOURRSpeed ya i posted that before i got to watching it... lol... sorry..

[@fernandofonseca1352]

Hey guys quick question with all those upgrades and mods, do you loose your warranty on the truck?

[@BrosFOURRSpeed]

Technically no, a dealer would have to prove the cause of an issue was due to one of the mods/upgrades. Doing things like this could cause something to happen, but I've never had any issues. Some people like to wait until the warranty expires to start modding, but I was never worried about it. I'm at 35k miles now and still drives like new!

[@TheWestyn]

Where did you guys find all the torque specs for everything?

[@BrosFOURRSpeed]

Our friend owns a shop and he let up know the specs from Toyota. They really just need to be tight tho

[@TheWestyn]

@@BrosFOURRSpeed Figures... right after I sent this, googled it and found the full spec sheet on tacomaworld. duh... thanks for the response though. I've watched a few of your videos and saw you had a clunk... did you ever have the dreaded vibration? i just did the exact kit you have only with dakars in the rear and get a vibration around 25-30 ish... my kit came with a carrier bearing drop but no diff drop. hoping to not have to do the needle bearing swap so I'm grasping everywhere for another option

[@jossuemorales8920]

@@TheWestyn Hey, I also have vibration like yours with this suspension lift kit, I will installed the 3* degree shim under the lift spring. I hope this work. Not all the tacomas work in the same way with this lift kit. I hope you can resolve the issue, please keep me informe if you fix it and how.

[@jossuemorales8920]

@@TheWestyn My vibration is on the back, I just check the front. Maybe yours is in the back too.

[@TheOfficialHenryC]

That "tie rod end" is actually a stabilizer link rod bruh. But good job on the DIY suspension upgrade!

[@BrosFOURRSpeed]

lol I know. I misspoke

[@davidnilles3117]

Really nice work guys. Love all the work you’ve done on the Tacoma.

[@BrosFOURRSpeed]

Thanks!

[@tyronelivingston67]

Clean cut Joe Dirt! Your Tacoma rocks!

[@mkbmj]

Which OME spring is on there?

[@BrosFOURRSpeed]

I believe the 886. kzbin.info/www/bejne/fIXFl6aFhq6rotE Here's a review I did on this kit. Truck still drives great!

[@billp5424]

Your original front struts/springs will add one inch of lift to any 2nd gen Tacoma so they do have some value.

[@BrosFOURRSpeed]

That's something I hadn't thought about, thanks!

[@fotomotoxxiii]

@@BrosFOURRSpeed let me know how much maybe I'll take em for my ladys 06

[@BrosFOURRSpeed]

Mr.G Disabled2Able Can you send us a dm on Instagram?

[@blaisecbetten]

i’ve been following you guys for so long and i can’t wait to see the finished product on the truck!!

[@BrosFOURRSpeed]

Thanks for the support! I can't wait to show everyone!

[@timlatour5276]

You’re literally killing me waiting for the final product

[@BrosFOURRSpeed]

Sorry! It's coming soon, next video goes up tomorrow!

[@411bigmk6]

bro... 11:45 you torqed that to perfection

[@jmoya0603]

What measures are the tires and what are they called?

[@JohnnyBoyCali]

The blue TACOMA on the gril looks really good.

[@acuteaccuracy9769]

It says Toyota

[@darriontunstall3708]

Yall did a awesome job!!! I love it!!! I can't wait for y'all next video!!

[@sumitwaghmare5461]

I love Toyota takoma forom India..

[@SugmaDLigmaNutz]

Why not the BDS kit with fox coilovers?

[@crfx8408]

I bought that kit with the bds uca kit, installing it on my ‘16 Tacoma in a couple of weeks!

[@SugmaDLigmaNutz]

@@crfx8408 nice! Tag TacomaWorld and maybe theyll reshare it. Would be cool to see.

[@spartan8390]

Simplicity. On a different note, are there any videos you know of that cover lifespan of aftermarket suspensions? I’ve never seen one and think it would be awesome.

[@mkbmj]

I have had Icon and Fox coil overs. Never Again. Living on the east coast, road salt makes maintaining the shocks a commitment. Not going to adjust them after year one. You can buy the whole OME for the cost of just the front coils

[@davidyang1768]

Just curious, why didn't you go with the Toytec Boss or Icons?

[@BrosFOURRSpeed]

I considered each of those, but those were both progressive shocks I believe, meaning they get softer the faster you go. I didn't really want that, and the ome stay the same regardless of speed.

[@davidyang1768]

@@BrosFOURRSpeed are the OMEs linear? I'm thinking about going with some Fox

[@speterbilt]

Think i will add this suspension and get a front e locker from arb on my 17 taco

[@kc8653]

What's the point to lift a midsize v6 truck?

[@BrosFOURRSpeed]

For better off roading

[@AndrewKNI]

Great video guys. Amazing to watch the transformation.

[@BrosFOURRSpeed]

Thanks! Can't wait for the rest of the videos to come out :)

[@seanest1986]

Can you put a link up with the suspension components.

[@BrosFOURRSpeed]

kzbin.info/www/bejne/mpSwlWh4hLlkprM Heres the unbox of everything

[@mikeligit]

Can’t wait to do my lift gonna be a 4 inch with 33’ tires

[@BrosFOURRSpeed]

Nice!

[@Jeziorski7]

you dont need to take the sway bar off to do this. I didnt do the upper control arms so maybe for those but just to lift it you dont

[@BrianSmith-si4zd]

Never tighten lower shock bolts or control arms with he suspension relaxed always do so when vehicle weight is on the suspension. Otherwise your gonna ruin your bushings.

[@BrosFOURRSpeed]

That's a good point. However on cars, that might be much easier said than done. Once the tire is back on, pretty hard to get to the bolts with the car on the ground

[@VJTrey1]

Are you going to install a differential drop kit?

[@BrosFOURRSpeed]

I don't think so, it's really not needed, but I did do that on my last truck, so I'll just have to see what's best on that.

[@VJTrey1]

@@BrosFOURRSpeed did you replaced the rear shackle bushing?

[@3lsalvy4life]

When it’s 3 inches of lift or more you should, to correct cv angles.

[@macdaddy1617]

So much more bang for your $$$ vs a Toyota Pro. 👍

[@BrosFOURRSpeed]

Yeah, you can build a TRD OR way better than a Pro for much less money

[@marcintopor7710]

So in total how much of a lift do you have in the front

[@BrosFOURRSpeed]

About 4 inches with the tires, that comparison video is coming soon!

[@marcintopor7710]

@@BrosFOURRSpeed I appreciate the reply! Thanks, I love the Tacoma vidoes. Keep up the great work.

[@BrosFOURRSpeed]

marcin topor Thanks man!

[@ISavageI]

So why people say don’t use spacers??

[@MrGunAddiction]

The suspense is killing me

[@BrosFOURRSpeed]

We were planning to do it in one video. But way to much work and footage. It would be a 1 hour vid lol. More is coming soon!

[@gigachad315]

What size of tires are they?

[@BrosFOURRSpeed]

33x12.5x18..here's a link to the video.. kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@Life_With_Dre]

What kind of rims?

[@kaydengilmore4840]

Did u remove ur sway bar? And can u link to lift kit used??

[@BrosFOURRSpeed]

I did not remove that and I got the kit from Headstrong offroad.

[@mblake0420]

buy new uca bolts and cut the bolts so u dont have to bend truck, install other way

[@BrosFOURRSpeed]

That seems like more work and $ then making a slight bend in the fender

[@mblake0420]

@@BrosFOURRSpeed seams cheap when u see the rust, on an old truck but a new truck its cheap

[@axsb]

you probably never measured it but you have the lean small or big.

[@BrosFOURRSpeed]

Yea, we did before measurements on as flat of ground as we could get, and it's pretty close for sure, but I wouldn't say enough to really make a difference

[@sumitwaghmare5461]

Nice car....

[@SugmaDLigmaNutz]

Why didnt you also get lift spindles?

[@Cameron.Vincent]

S.K.H. You can’t put lift spindles on a 4wd

[@SugmaDLigmaNutz]

@@Cameron.Vincent seen lifted 2nd gen and 3rd gen 4wd trucks in Florida....

[@Cameron.Vincent]

S.K.H. You can lift a 4wd truck but you can’t install lift spindles due to the cv joints

[@Cameron.Vincent]

The angle has to be consistent

[@SugmaDLigmaNutz]

@@Cameron.Vincent my bad, looks like they were running the full 6" BDS kit with fox coilovers.

[@ChrisTripp]

12:33 The link kit is a tie rod end again LOL!

[@BrosFOURRSpeed]

That is the tie rod end though..

[@teslagaming2398]

Wait did I just watch u put on headphones while using the impact wrench...

[@devildog1168]

Umm I think you forgot to add grease to that upper control arm joint.

[@yanglu9555]

Wow i am so... dizzy after watching this video. Great DIY project but do purchase a tripod for next video or a third person strictly designated to film the video.

[@3lsalvy4life]

Holy crap they still make corded Impact wrenches? 😂😂

[@BrosFOURRSpeed]

We got that from a friend so we can't complain!

[@kevinblackmon2223]

That’s a sway bar end link not a tie rod. But kudos for learning how to do it yourself. One way to learn is to make mistakes while doing it yourself.

[@BrosFOURRSpeed]

Yea I don't know why I called it that, but yea we learned a lot if we have to do it again sometime!

[@ehumaui4087]

What lift brand?

[@BrosFOURRSpeed]

kzbin.info/www/bejne/mpSwlWh4hLlkprM Here's the detailed unbox video, its an OME kit.

[@sander26rd54]

im waiting for new settings on the gtr

[@bengamer2060]

That’s a sway bar end link

[@lukestoyz]

Important to Retorque to specs

[@BrosFOURRSpeed]

lukestoyz Yeah after everything is installed I’ll re torque, drive 500 miles, and torque again

[@firefist28_53]

When I installed my uca it was a big bitch! Took me a day just for the uca bolt.

[@BrosFOURRSpeed]

YotaFire28 oh wow. That’s what we were expecting. But it took about 30 minutes for the driver side and then 10 minutes for the passenger. We finished the entire front end in maybe 4 hours

[@firefist28_53]

Bros FOURR Speed wow That’s quick! Wish it would’ve take me do it haha. Did you guys end up greasing the uca?

[@BrosFOURRSpeed]

Yea that's in a later video!

[@simonlynchsae]

Wait, are you telling me that to change upper control arms on a Tacoma you need to damage the bodywork? I have a hard time to believe this...

[@BrosFOURRSpeed]

If you want to reuse the bolts. It only had like 1/8 of an inch it needed to clear, so really not much damage.

[@Drohead20]

Damn you are milking the shit out of this. Install video part 1, install video part. 4 months later, installing 1 tire, installing second tire. I only came to see the finished product skipped through whole thing only to find out you never revealed it.

[@BrosFOURRSpeed]

There's way to much content to just make 1 video, it would be like an hour long or more. Some people want to see the install so they can do this on their own truck and have a how to, to look at.

[@Drohead20]

Bros FOURR Speed good call

[@MrBirdboy125]

Ome? Dont you mean oem but its after market not oem..

[@BrosFOURRSpeed]

OME is the abbreviation for the brand, Old Man Emu.

[@acura2g]

Lol, now try it on a truck in the rust belt

[@BrosFOURRSpeed]

Yeah that would suck! We did the lift on my 07 Tacoma at 50k miles and even with no rust, we had to cut a bolt out. Definitely the benefit of lifting a pretty new vehicle.

[@brovanthechinchilla6384]

This guy kinda looks David spade . Just saying.

[@laletvinluan7792]

😄

[@lrlapua8035]

buy a real jack...HF aluminum jacks are very good and reasonably priced....

[@BrosFOURRSpeed]

This one has been fine, its a 3 ton jack, so it's fine.

[@lrlapua8035]

@@BrosFOURRSpeed blocking up a jack is not smart, get a proper jack....

[@tylermosner2073]

who uses box wrenches for this? This is hilarious, get a socket set.

[@GEORGEVENEZUELAFREE]

You guys fucked those brand new bushes, you must tight those upper c/a and the lower shock bolt when the truck was on level with the ground. Otherwise the bush will torn inside the metal bit with the rubber. Plus i dont know why you guys replace the billstein for old man emu?

[@tg8150]

Way to destroy a more than capable off road truck. Lifting weights is cheaper than lifting a truck for more self confidence. Full size truck would have been easier to lift instead of destroying your little Tacoma with pliers and hammer.

[@mickberry9991]

Stopped the vid just before it started. Why you ask? Because the only mod that would be fit for a Toyota would be a Car Crusher. Period!!! And the fact that this guy looks like David Spade.

[@timothyalvarado5315]

You’ve been hyping up this video for a Month now

[@carlosmiranda628]

Ricer-coma

[@speterbilt]

Nitto grapplers are garbage. These are better u have

[@wilkinrincon8423]

👀💪💪💪

[@photonbuster5214]

Bro you look just like david spade

[@BrosFOURRSpeed]

I definitely get that comment a lot.

[@charlesschurch6772]

🤦‍♂️

[@judasdasnitch9799]

Butchers!

[@nissanus402]

手順がめちゃくちゃで危険

[@joselvazquez9310]

Leveling kits 👎

[@anthonyp.harvey5985]

Holy shit if you don't know the difference between a tie rod and a swaybar end link you don't need to be turning a wrench. Glad I don't hav to drive that truck....

[@spartan8390]

I’d like to point out they did the install themselves, and did it correctly. I’d say they have all the credibility to continue turning a wrench. Don’t be “that guy.”

[@anthonyp.harvey5985]

@@spartan8390 let them keep dabbling and one day they will jack up somthing wrong or pull the wrong nut or bolt and the will be lucky to walk away with there life. Did you notice that had the jack stands under the step bar brackets...

[@jetpilot111]

Anthony P. Harvey Yes but at least they are using 2 stands per side. One of which is on the frame. Good stuff

[@fernandocortes6143]

It’s not a tie rod end it the sway bar link

[@BrosFOURRSpeed]

I called it a sway bar end link, unless there's a different spot in the video you are talking about..

[@dixielee6657]

Haaaeew

[@mblake0420]

dumb wheel tire selection....not a car dude

[@trynice7443]

Toyota needs to be kicked in the ass for Designing and ugly truck like that that is hideous

[@chrismully1458]

Wow, should have went with Kings or FOX and some real UCA. I replaced the UCA bolts on my FOX lift. Your truck will ride like shit compared to a real lift. Might as well went all goofy and slam on a 6" DBC lift. Do it right the 1st time or not at all. Ruined a good truck.

[@BrosFOURRSpeed]

I'd say just wait till you see it completed, I did it right.

[@chrismully1458]

@@BrosFOURRSpeed Whatever, go Huck that shit when it's done. It will brake and leave you stranded. Google Huckfest Pismo beach and you will see what we are made of, no junk here, BOY....

[@alexv5581]

@@chrismully1458 Shut the duck up loser, you are so insecure you have to project your negative emotions on to other people. Good luck in life.

[@raylopez3195]

What's up with that gay music😂🤭