EVERYONE Said 33’s Would Rub On My Lifted Toyota Tacoma!! *BIG MISTAKE*

In today's video we mount and balance the new wheels and tires!! This is a pretty aggressive set up as you will see, we had some "rubbing" issues at first, but once we got home to evaluate everything, I have zero rubbing and no need for a cab mount chop! I will have a detailed install and before/after measurements so stay tuned for the rest of the build for the Tacoma by subscribing to our channel!
Let's unveil my newly lifted 2017 Toyota Tacoma TRD Off Road!! You have all seen the previous videos where I show the entire lift kit, wheels and tires. And then the two separate installation videos. First installation video we show how to install upper control arms and struts up front on the Tacoma.
Second installation video we install the add a leaf pack and upgraded rear shocks.
We had a ton of comments from people saying that the +10 offset on my RTX wheels along with the 33 X 12.5 Nitto tires would be way too big! They said rubbing on the fender liners and parts of the cab would be inevitable!
I planned out this lift for a long time and was confident the specs I went with would have perfect fitment. However when at the tire shop getting everything mounted and balanced, when they put the front wheel on, it rubbed on the upper control arm!
So we thought there was an issue and scrambled a bit to figure out the best way to solve the 33in tire rubbing issue.
Turns out the wheel was just placed on the hub and was being held there at an angle which caused it to rub. ;)
After bringing the completed set of RTX wheels and Nitto tires back home, we installed them just as planned and had absolutely no rubbing! We did not need wheel spacers or anything. I think I went with the perfect specs for everything and overall installing this 3in lift kit on my 2017 Toyota Tacoma went very well! I got the exact look I was going for and everyone was wrong when they said I'd have to cut the fenders and do a cab chop! Honestly I was expecting some rubbing, and we were actually shocked I had a good inch of clearance even at full lock.
The lift kit on the Tacoma along with the wheel setup is perfect!
Front install: (Upper control arms and struts)
• The BIGGEST MOD For My...
Rear lift install: (leaf pack and shocks)
• The BIGGEST MOD For My...
Unbox: (everything I bought)
• The BIGGEST MOD for th...
Our Equipment:
Vlog/Action Camera:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
Www.epidemicsound.com
#tacomaliftkit #toyotatacoma #tacoma33intires #bigtirestacoma #norubbingliftedtacoma #tacomaoffroad

[@ocalcetas1]

My 2017 Taco is still stock. I want to get 33’s and not have issues. Your setup seems to be PERFECT. Great job.

[@BrosFOURRSpeed]

I have a lift on it lol, you might have rubbing with a stock truck.

[@darriontunstall3708]

Great video guys!!! That's looks excellent!!! I love it!!!! Yall did a awesome job!!!! I can't wait for y'all next video.

[@BrosFOURRSpeed]

Darrion Tunstall Thanks!

[@darriontunstall3708]

@@BrosFOURRSpeed yall welcome

[@joluar78]

Looks great! I put 33’s on my Taco earlier this year and had to do some very minor trimming on the back side of the wheel wells. You looked excited once the alignment was done.

[@BrosFOURRSpeed]

Yeah I'm pumped about it! No rubbing at all for normal driving. We'll see about hardcore off road. But worst case I might have some small trimming to do, which is no big deal. My 07 Tacoma rubbed a lot at full lock on flat ground with smaller tires. 3rd gen is set up great for this.

[@northernlifts5564]

I had the same exact issue on my Canyon. My tires we rubbing on the lift knuckle. The wheels I got were +18 offset. I opted to get the 2” bora wheel spacers. Gave me plenty of room and plenty of stance.

[@georgeslyer8107]

Look forward to the before and after measurements and photos.

[@wesleehein28]

Fitment math is a thing and the reason why is explained perfectly above 🤙

[@gurban333]

give your shops some shot outs man. they are nice enough to let you film!

[@davidnilles3117]

Looks absolutely great guys. I know you’re excited to have it completed!

[@BrosFOURRSpeed]

Thanks!

[@marioremington345]

i dont mean to be so offtopic but does any of you know of a way to get back into an instagram account?? I somehow lost my login password. I appreciate any help you can offer me.

[@blainedarian9757]

@Mario Remington Instablaster ;)

[@marioremington345]

@Blaine Darian I really appreciate your reply. I got to the site thru google and I'm trying it out now. I see it takes a while so I will reply here later when my account password hopefully is recovered.

[@marioremington345]

@Blaine Darian It did the trick and I finally got access to my account again. I'm so happy! Thank you so much you saved my account!

[@AndrewKNI]

Great job Mike. The truck looks awesome. Well done guys :-)

[@BrosFOURRSpeed]

Andrew K. NI Thanks!!

[@Rockdaground]

You got the offset of the wheels just right. Great job. I have zero offset on my wheels so I might rub a little.

[@BrosFOURRSpeed]

Rockdaground You might just barely be rubbing, maybe a little more trimming than me, but compared to negative offsets, you're in better shape like me.

[@Tacoexplorer]

Nice. Looks awesome! I am getting the same tire tomorrow but 285/75/17 on my Tacoma with SCS Ray10 wheels. I have icon tubular UCAs and they should not rub.

[@davidyang1768]

I'm diggin it! Can't wait to lift mine!

[@BrosFOURRSpeed]

You'll love it! Can't wait to test it off road!

[@thomasrainbow]

Looks great man. Nice work

[@miami_boosted]

It’s not rubbing now but I think it will once the lift settles a little and if you hit a speedbump or pothole it will hit in my opinion. I may sound stupid but that’s just what I’m guessing based off my experience off my 5 inch lifted 2018 F-150

[@oscolivar]

What you speak is truth. Your gonna lose -25”-.5” of life. Your gonna rub a whole lot in places off-roading in the places you’ve gone stock.

[@BrosFOURRSpeed]

Kenny Zaidner I'll be sure to update if there is any rubbing issues, normal driving it's good, but offroad I need to see if it's close or not.

[@damado26]

Yeah, usually if you're going to do any offroad, it's best to put the larger tires on before a lift so it's easier to see where you'll rub and can cut as needed. When you offroad, the suspension will compress even more than with no lift, so you'll rub even more than without any lift. Offset also has a lot to do with it. The more NEGATIVE offset, the more rubbing when close to or at full lock. Positive offset can help avoid rubbing, but you have to be careful not to hit the UCA. High caster can also help, but just a little. This is all unless you have a lift kit with travel limiters. But then people who get travel limiters aren't really into offroading. You want as much travel as possible offroad.

[@rcandairsoftadventuers2653]

@@BrosFOURRSpeed just as a fair warning I have a 2016 Tacoma as well and had a 3 inch lift and 33s put on and no rubbing at first. but when they compressed the suspension at my off road shop the upper control arm will move out more and hit the tire. it may be a little different for your truck since you have different tires but I just wanted to give you guys a heads up. love the look of the truck. keep up the great work.

[@BrosFOURRSpeed]

Thanks for the tip. When we do our first adventure with this set up we'll watch all that stuff to se what it can do ;)

[@DanielGonzalez-pn8gv]

Great Job. The Truck looks sick...

[@BrosFOURRSpeed]

Daniel Gonzalez Thanks!

[@randylamb920]

Truck looks awesome. Really nice job.

[@BrosFOURRSpeed]

Randy Lamb Thanks!

[@johnwacker]

I literally just bought 33s and the same lift last night. I saw this thumbnail and almost died. So glad it all worked out!!!! 😅

[@BrosFOURRSpeed]

Oh dang lol. Yeah we were scrambling for a bit when they test fit the wheels, but it helps to test fit wheels using the lug nuts to hold them straight lol

[@Tess_untamed]

I had to get spacers for my rims 3 1/2 " front and back so it looked proper on the truck. "NOTE" Always check when you order a lift what the recommended back spacing for the rims are. The back spacers do work. I never had a problem with them on my truck.

[@Mrpobra]

I have a 2006 with 3 inch lift and 33's x 12" and i had to do some trimming up front and cut off a little bit of the chassis support in the front also .

[@2291adrian]

Your truck looks so much more aggressive. Good job! But like others have said just wait until the lift settles a bit and double check. It may not rub now but off roading will definitely push them around bit. Any off-roading shop should be able to do a Cab Mount Chop(CMC) for you if you do end up rubbing. I can’t wait to see what else you have planned!

[@BrosFOURRSpeed]

Yea I'm going to take it off road soon to see how it performs, I might have to take a the corner off the CMC just a bit, we'll see!

[@ARayHolder]

I have a 2018 Tacoma with a leveling kit, 3 inch front 2 inch back with Fuel Vapors and 285/75/17s BFGs and no rubbing at all even completely locked out on a turn and looks awesome. It can be done

[@BrosFOURRSpeed]

Awesome! I don't know why some people don't believe it, glad you have no issues either!

[@nikolas503]

This gives me confidence for my 2018 taco... i just bought 285 70 17s and rims with 0++ offset. With my 3 in front and 2 inch back lift i should be fine with no rubbing yeah?

[@ARayHolder]

The Niko Experience I think you’ll be totally fine, I have a -12 offset they clearly can be seen sticking out and do not rub when completely locked out on a turn.

[@ARayHolder]

The Niko Experience hit up America’s tire, they’ll let you know what can and can’t be done that’s who I went with for rims and tires

[@saulgarcia4761]

Can load a pic of ur taco

[@Tess_untamed]

Oh ! You also have to think about flex over bumps and rocks. Make sure to try it out before you say it will work. Just to be sure nothing will hit and have a bigger cost later.👍

[@doorkicker8507]

Just bought 2019 Trd off road and put a 3 inch lift with 33s. Had to put spacers on. Because on tight turns tires will rub.

[@GsxrGrl21]

Loveeeee the look,makes the Taco meaner with the beefy tires! I do worry though that they still may rub some with travel,I hope they don't!

[@BrosFOURRSpeed]

Thanks, yea I love the look now! Off road rubbing could be an issue, so we'll just have to see!

[@GsxrGrl21]

@@BrosFOURRSpeed Looking forward to it!!! Can't wait to see more vids!

[@BrosFOURRSpeed]

GsxrGrl21 Thanks!

[@lukestoyz]

Icon upper arm with delta joints

[@kennydodd5681]

Looks good,I'm 58 love my Toyotas, I have 96 tacoma, I'm just not into lift or going to any other wheel other than Factory!! But don't get me wrong, looks good got (4) yrs. going retire going get new Tacoma then anyway buddy I'm happy for u !!

[@BrosFOURRSpeed]

Very nice man!

[@AB-te7uw]

Looks awesome,,,well done guys!

[@BrosFOURRSpeed]

Thanks!

[@Artofspeedd]

Great video

[@ribzzzz]

Absolutely love it!!

[@BrosFOURRSpeed]

Thanks!

[@topnotch1386]

You will be fine going down the road and turning unless there’s a bump or off camber turn. But you can always fix that with a heat gun and work the wheel well liners up front. If you’re doing a lot of off roaming they make cab mount cut kits for the backside of the front wheel wells.

[@BrosFOURRSpeed]

I'll have to look into the CMC once I go off road and see if its needed, probably have to do it.

[@sergioayon46]

It looks bad ass brother, great work!!!

[@BrosFOURRSpeed]

Thanks!

[@MitsuFQ400]

I agree wrong size wheels. 16's and 17's look lot nicer on these tacos

[@isabelavelez4566]

I learned that the hard way! Never again

[@colesknolljr5904]

@@isabelavelez4566 then your lift is wrong.....go Icon and 33X 11.5 are perfect fit

[@peachybiscuit4531]

Hey how did you get that black trim along the doors? I would like to get that done on my Tacoma as well. Thanks!

[@brianmitchell927]

I'm looking to get get a 2019 trd off road. And i want to get it lifted and put all terrain tires on. I don't know much about trucks and would like some suggestions on lift size and tire size. I'm looking to spend around a grand on the lift and about 200-250 bucks on each tire. I want to go off roading in colorado every now and then. I would really appreciate any suggestions

[@irajackson6423]

Milwaukee 1/2” impact kit and some flip sockets would help you a lot

[@clunacy]

Looks like it should handle the mall lot pretty well

[@andrewp1512]

BEHOLD, another mall crawler is born.

[@shizzle1903]

I don’t understand the mall crawl reference. Meaning the tires can’t handle off-road? Sorry I’m not hip to the lingo.

[@whatfreedom7]

I saw a nice Tacoma for sale used. I’m looking at it has skids,nice bumpers,lift,off road tires and I’m thinking damn I should trade mine in for it. I look closer under it and it’s 2wd,lol. I was thinking WTF?! Who does this to a two wheel drive?

[@Xx_Sterbern_xX]

@@whatfreedom7 cool story bro

[@matthewking4470]

whatfreedom7 prerunner lol

[@bsc285]

David Spade!!!

[@tjs1tjs3]

If you take a tight turn at some speed. (Mountain driving) the body roll will cause the tire to snag the uca. Highly recommend a small spacer. Your set up looks exactly like my first one and I had the same problem. Overall looks great!

[@BrosFOURRSpeed]

Turner Suhler interesting. I’ll do some test to see if I run into that. I have almost 1/2 inch of clearance to the UCA, so I’ll see if it still clears

[@jamestatham-clark8374]

It looks Awesome!!

[@BrosFOURRSpeed]

Thanks!

[@dimitrivaqueros7883]

so here is the thing, it looks really good, you might rub when you turn and there is a bump or even a little bit, it rubs in the inner side I know because I have a icon stage 4 and even is a great suspension it does rub sometimes and I have 3 in lift up front, other than that you would love the capabilities of your truck now is lifted it was about time, have fun

[@BrosFOURRSpeed]

dimitri vaqueros Yeh so far normal driving there’s no rubbing. We’ll do some test off road to see what will need to be done as far as trimming

[@ApplianceRep]

I have a video of my old tundra truck in quicksand color. I lugged around the steel bumpers and heavy rims for a while until I traded it in for a tacoma inferno way better in maneuvering although I do miss the power of the tundra went from 12mpg to 21mpg

[@sporttracnation9359]

Nice truck I like it, but i would have put the wheel spacer just for future purposes when the lift settles and it won’t hurt to put just a 10mm spacer on it

[@TheFokusing]

The Tacoma looks like a new truck, looks way better lifted and with bigger tires! I also prefer black wheels. I recommend getting hub centric spacers just in case. I have those on my Tacoma and they’re safe because the wheels rest on the hub of the spacers rather than the lug nut screws

[@BrosFOURRSpeed]

TheFokusing Thanks I love the look! If I do end up needing spacers I’ll definitely do hub centric 👍🏼

[@marlonm396]

Congratulations.. Truck looks amazing.. Let me ask you, did you have to calibrate the new wheel sensors to the computer? how did that work? Enjoy the new look.. Cheers!!

[@BrosFOURRSpeed]

I will be doing that this weekend actually since we didn't get the tires on at the shop, so I'll show how that works.

[@ShitSmit]

Should’ve checked out Bora wheel spacers at custom offsets website. Trusted brand, quality results (if done correctly), and relatively cheap for a set of 4 🔥

[@braddomangue185]

Sweet truck Bro!

[@BrosFOURRSpeed]

thanks!

[@irajackson6423]

You need a milwaukee m12 1/2" impact,maked rotations and flat repair easy

[@hectorrivera6624]

Funny, I was thinking the same. Always keep on in my car.

[@rexnhogz]

looks sick

[@BrosFOURRSpeed]

Thanks!

[@josephpizzi7505]

Sweet setup truck looks gr8 👍

[@BrosFOURRSpeed]

Thanks!

[@edwing134]

looks great have fun

[@BrosFOURRSpeed]

Thanks!

[@leaguemotivation8758]

Looking good man!

[@BrosFOURRSpeed]

Thanks!

[@24inchesinpants]

Looks proper now but you will most likely rub once you take it wheeling and you get that suspension flexing. same issue i had with mine but i dont wheel enough to have to worry about the rub. for driving down the road it will be perfect though.

[@BrosFOURRSpeed]

I'm glad normal driving it's not even close. I'm sure I'll have some minor trimming to do once off road. But even with smaller tires on my 07, that rubbed a lot with a 3in lift. So this having no rubbing at all on flat ground is great!

[@flashback5391]

It’ll most likely settle and you’ll need to do something. In all honesty hind-site is 20/20 those rims shoulda had some offset in them. But the rims and tires look sick. But with no offset the truck doesn’t really have any stance.

[@michaelj.kastner5165]

I did the same to my Tacoma, i have the exact stock rims/tires with 100 miles on them, nobody made me a reasonable offer, i still have them.

[@jah_sells_everything6816]

I sold mine for 700 a couple weeks ago. Not sure what you consider reasonable though

[@j_m0t0]

Backspacing for the win.

[@reeseperry8171]

What offset did you go on your rims and what exact size are your Nitto's. I have some 285/70/17 coming in with a Fuel D648 with a -12 offset and I have a 3 inch lift front and back. I hope they do not rub. Why don't you like spacers?

[@BrosFOURRSpeed]

The wheels in this video had an 18x9 +10 offset with a 33x12.5 tire. My next set was 17x9 0 offset with a 285/70/17 and didn't have any rubbing until I added the 1.25' spacer. I had the spacers on for awhile until I went up to 34's. Spacers are ok if you do it right and calculate for the offset of the wheels so it's a good setup. With the -12 you have, you may have some slight trimming to do, but it shouldn't be anything crazy. Possibly the CMC maybe, but maybe not!

[@r6TrdSlow]

Looks fantastic man, can’t wait to see the difference off roading with all you’ve done

[@BrosFOURRSpeed]

Robert Morrison Thanks! Yea I can't wait to test it out!

[@Cheetorblz]

When you go with taller tires, do you need to do anything to adjust speedometer and odometer or is it not enough difference to be of any signifigance?

[@kevincarroll8600]

Looks awesome brotha!

[@kevincarroll8600]

I just put fuel tactics on my 2nd gen . On 265s . Leveled but next on getting 33s .

[@BrosFOURRSpeed]

Kevin Carroll Thanks! I love the look

[@Tess_untamed]

You probably had the same problem that i had when i got a 4" lift on my 96 dakota 4x4. When i didn't get the proper back spacing for my rims.

[@sethglenn9022]

Its one thing to test for rub on a flat garage floor. But you will still have to do some trimming to prevent rubbing on uneven ground. You can get away with however little space you have at the control arm. But do not get rid of them or alignment will be nearly impossible. You can use the camber adjustment in the control arms to make more space between the tire and the UCA at the alignment shop. If you plan to use a spacer, get hub centric spacers, also consider longer wheels studs because the Toyota has short studs and you cant achieve proper thread engagement in the lug nuts. Truck looks great though. 22x12s would have been cooler 😏

[@BrosFOURRSpeed]

This was actually almost a perfect setup. Only aggressive off road with the wheels fully turned, it would barely hit the cab mount. But not enough to need any trimming.

[@luckychris1997]

It's nice. Makes me wanna go buy one

[@BrosFOURRSpeed]

Thanks! It's a nice set up and a great truck :)

[@Ir0nMaidan]

You need more offset from the wheel itself...most ppl run on 285s and those are only 11.5 wide at most and those can rub ur UCA quite a bit of ur fender liner. IMO if u wanna stick with those heavy wides...get a completely different wheel with some more offset then what you have or run a WS or swap tires lol

[@cretan911]

That this looks like its AWESOME in the Rain!!!!

[@BrosFOURRSpeed]

Thanks! It's a beast!

[@cretan911]

Yes it is. I love it!! @@BrosFOURRSpeed

[@tommypearson9260]

Should of used Hub spacers nothing wrong with them i use them and have been pretty rock solid

[@DustinAplin]

Why did you get a +10 rim? A 0 or -12 rim would have been better? Research, research, research! @customoffsets would have been very helpful.

[@ogkg5875]

Maybe he doesn’t want to ride around looking like EVERYONE else.

[@cashmiller2999]

Looks nice!! Do you thing you’ll have needle bearing issues with this lift?

[@BrosFOURRSpeed]

I don't think so, I had a 3'' lift on my 2nd gen and never had that issue, only when I went to a 6''' did I have to replace that, so I'm hoping not with this set up.

[@omarcaban9917]

Looks good!

[@BrosFOURRSpeed]

Thanks! This was a good setup. I now have full 34in tires and have changed up quite a bit on the truck

[@omarcaban9917]

@@BrosFOURRSpeed Congrats ! I like the tacos myself but stuck between that and the new tundra .but I still have to try to kill my gen 1 Ridgeline

[@BrosFOURRSpeed]

@@omarcaban9917 Oh cool. For me, I dont need the space or towing capabilities of a Tundra. And the off road trails I do are tight enough for the Tacoma. Tundra would never fit through the woods. So depends on what you need it for.

[@omarcaban9917]

@@BrosFOURRSpeed Cool thanks for heads up 👍,

[@vins1521]

Looks great dude, how much for the wheels and tires..?

[@albertohernandez5481]

I was custom my Tacoma with wheels 20" XD series!!

[@atch9790]

Looks great

[@BrosFOURRSpeed]

Thanks!

[@jacktudela4182]

looks like you need longer steering knuckles. the UCA is too close to the tires. all in all the truck looks great.. you could use your stock wheel and put aggressive looking tires and still look rugged. thanks for showing good video.

[@pavel_bis.channel1428]

Hi dude, how is dynamic 0-60 after installation? How slower it became?

[@surunner455]

When you cycle the suspension with the wheels turned, you'll likely rub, particularly in reverse.

[@BrosFOURRSpeed]

surunner455 So far on flat ground it doesn’t. But I’m going to test it off road at different angles to see where it starts rubbing

[@hoffman12100]

Looks good. One thing I saw tire size. Your speedometer will be off. So watch out if the cop are behind you.

[@flipmode9236]

just want to very verify. so the rims are +10 offset. what was the stock offset. +12? also what setting did you use on the spc. u had so much room from body mount?

[@BrosFOURRSpeed]

Yeah these wheels had a +10 offset, the stocks are around +25. My original alignment was set at the stock setting because I didn't know how to adjust them properly. But now I have them adjusted properly and you can see all those settings in this video!! I have 34's now with a 0 offset wheel and 1.25'' spacers with zero rubbing! It's a great setup! kzbin.info/www/bejne/g3uuaZZmpad-htU

[@jamie91433]

Good choice on tires

[@jerryfernandez8881]

i had rubbing on my 2017 on the inner cabin , going to have to do a body modification to eliminate all rubbing when turning..BF Goodrich K02 285/70/17 on FUEL Ripper

[@chrisarreguin7448]

Do you have a lift on it? Those r the exact size I want to get with my 3” lift just wondering if it will work

[@jerryfernandez8881]

I have FoX 2.5 inch lift...there is various factors that come in to play..your wheel offset, if you change your upper arms are they high caster or some are adjustable ...I did a body chop and cut some of my inner tire well plastic...only rub when I turn hard in to a driveway..

[@chrisarreguin7448]

Ok I’ll have to mess around with it. I have total chaos upper arms 9” with -12 offset, I’ll see what I can make work

[@2009reezen]

My 2018 Tacoma shifts a lot with stock wheels and tires. How much worse is it with 33’s?

[@tackcoma5280]

I have 33's on my Tacoma with a 2" level kits and its doesn't rub when driving normally but its does rub when coming up my drive way at an angle just not as bad that you need to shave any fender off. My wheel is 20x9 with a offset of 1.

[@BrosFOURRSpeed]

Did you do the CMC? I'm probably going to have to cut the corner of it off at some point, need to see first.

[@tackcoma5280]

It’s not bad to a point where you have to do an CMC, you can use a heat gun and bend all them fender liner in. If you plan to go off road, I recommend investing in another set of wheel mainly for off road. This set up would not work. Good Lucky with the rest of your build and do what you love.

[@marcusmendoza9354]

Should’ve gotten more offset on the wheels, I wouldn’t go back to stock uppers

[@danielhowell1640]

Dope wheels bro

[@BrosFOURRSpeed]

Appreciate it! I have some different ones now though if you haven't seen recent videos!

[@anthonytolson9169]

Just ordered the old man emu 3” lift. Medium weight. We’re your coil spacers in the kit or extra ?

[@taylorsnyder3329]

Love man! Getting 285 70 17s on this weekend. Bilsteins in 2 weeks. What's that tailgate wrap? I want to take my stickers off my letters and do what you did!

[@BrosFOURRSpeed]

If you start at 9:21 in this video, we just used matte black vinyl! kzbin.info/www/bejne/rmTEdoaiqbuXsKs. And start around 5:04 here to see the sticker removal! You'll have fun with the Tacoma for sure!

[@taylorsnyder3329]

@@BrosFOURRSpeed thank you!

[@BrosFOURRSpeed]

Your welcome!!

[@JesseRizo]

It looks good man 👌 No rubbing for both of us ;)! Smashed the like button!!

[@BrosFOURRSpeed]

lol thanks! We'll see what it does off road. I'm sure there will be a little bit on the fenders

[@JesseRizo]

Bros FOURR Speed you welcome man lol!!, I’m sure on those crazy stances lol we’re running almost same setup though and mine hasn’t rubbed yet Offroad but I mean I havnt done nothing to crazy yet I gues time will tell 😎👍

[@BrosFOURRSpeed]

haha yeah we'll see. I'm glad for daily use on the roads, I have no issues at all. I like the set up a lot and am excited to try it on some trails

[@JesseRizo]

Bros FOURR Speed exactly lol!!! Forsure man hopefully someday we can cross paths and run some trails together 👍 I know my channel is nothing near as big as yours but would be cool to have you on the channel sometime and do trial runs or something 👍

[@BrosFOURRSpeed]

Yeah man maybe one day ;)@@JesseRizo

[@fneal68]

looks good. a little close for my liking , why did you cover up tires with a tarp?

[@BrosFOURRSpeed]

It was pouring rain and I didn't want water inside the tire after the wheel was put on them, so I wanted it to be bone dry.

[@twentyonetoone9783]

What sensors did you go with? any issues with them, reprogramming them?

[@BrosFOURRSpeed]

This was so long ago I can't remember, but just generic sensors and with the programming, it took like 10 miles or something like that to sync up! I didn't have any issues with them!

[@mrnova70vp]

Another great what not to do to your taco video. Thanks for showing us what unsafe looks like

[@macdaddy1617]

Different rims have different offsets, need to know all this before buying and installing a lift. Ask a lot of questions before buying.

[@christ2054]

Should have gone with a 285/75/17. Would have looked much better. And a 17x9 with -20 offset. Would’ve been perfect

[@castanonj2011]

@bros four speed Hey buddy with that lift do you have any play in the steering wheel or it feel like stock?? And what kind of lift you use for the front?

[@BrosFOURRSpeed]

It feels like stock, and here's a link to the lift kit video so you can see everything.. kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@jonathonnordyke5370]

The problem is if you guys do any serious off-roading it's going to rub

[@DMHal01]

JLNProps - yah not too mention he probably didn’t even regear. Which will suck the life out of that truck and it’ll struggle.

[@BrosFOURRSpeed]

@@DMHal01 No issues man..and slight rubbing offroad, but nothing crazy. I didn't even have to do the cmc yet.

[@dant3113]

Bro you really think these dudes be off roading 🤣

[@Brenny627]

Do you think tires the same size but a little less aggressive would have a better fitment

[@BrosFOURRSpeed]

I could have gone slightly smaller on the tire, not as wide would have given more room obviously, but I'll be able to make these ones work! It would have been a lot more work to fit them if I had a negative offset on the wheel too, so that definitely helped.

[@josebarcenas6378]

Looks good.

[@BrosFOURRSpeed]

Thanks!

[@xXjarhead95xX]

Shoulda bought rims with alot of offset instead..... Looks better and solves spacing issue.

[@Vodafone16v]

It would have been MUCH convenient if you talked about the wheel SPECS. Did you even considered the offset (ET)?

[@mattkoehler4252]

Yo you're in my hometown😂👍🏻

[@matthewrice3873]

Stock will out perform that mall set up

[@Ir0nMaidan]

Oh btw, when ur doing full turns and no rub..yah its ok but as one said ur suspension is gonna settle a bit more and 2..you havent gone offroading,bumps or anything like that and you will absolutely rub/touch that UCA

[@BrosFOURRSpeed]

I still need to test that yea, so we'll see.

[@stantate1747]

I see popped front tires in your future, its gonna hit the UCA when you go offroad.

[@BrosFOURRSpeed]

This setup never hit off roading. And I did a ton of adventures with it

[@stantate1747]

So you installed 1.5" spacers in the front with the new tires?

[@stantate1747]

My bad, didn't see you were changing the wheels to a different offset.

[@ericbergan6479]

my tacoma with 2.5 inch level in the front stock rear barely rubs with 33.6 in tires. Next time buy some rims with negative offset

[@cjwright1960]

The rub usually don’t happen on a flat level surface at stand still, it will definitely rub off road in a suspension flex, i.e. when it really matters...

[@BrosFOURRSpeed]

This setup didn't have any rubbing offroad! Because of the positive offset, they did really good! Since these tires I have gone up to 34's and have had to do the CMC and only have minor rubbing in certain spots offroad! But it's been a great setup for this Tacoma!