EVERYONE Said 33’s Would Rub On My Lifted Toyota Tacoma!! *BIG MISTAKE*

[@miami_boosted]

It’s not rubbing now but I think it will once the lift settles a little and if you hit a speedbump or pothole it will hit in my opinion. I may sound stupid but that’s just what I’m guessing based off my experience off my 5 inch lifted 2018 F-150

[@oscolivar]

What you speak is truth. Your gonna lose -25”-.5” of life. Your gonna rub a whole lot in places off-roading in the places you’ve gone stock.

[@BrosFOURRSpeed]

Kenny Zaidner I'll be sure to update if there is any rubbing issues, normal driving it's good, but offroad I need to see if it's close or not.

[@damado26]

Yeah, usually if you're going to do any offroad, it's best to put the larger tires on before a lift so it's easier to see where you'll rub and can cut as needed. When you offroad, the suspension will compress even more than with no lift, so you'll rub even more than without any lift. Offset also has a lot to do with it. The more NEGATIVE offset, the more rubbing when close to or at full lock. Positive offset can help avoid rubbing, but you have to be careful not to hit the UCA. High caster can also help, but just a little. This is all unless you have a lift kit with travel limiters. But then people who get travel limiters aren't really into offroading. You want as much travel as possible offroad.

[@rcandairsoftadventuers2653]

@@BrosFOURRSpeed just as a fair warning I have a 2016 Tacoma as well and had a 3 inch lift and 33s put on and no rubbing at first. but when they compressed the suspension at my off road shop the upper control arm will move out more and hit the tire. it may be a little different for your truck since you have different tires but I just wanted to give you guys a heads up. love the look of the truck. keep up the great work.

[@BrosFOURRSpeed]

Thanks for the tip. When we do our first adventure with this set up we'll watch all that stuff to se what it can do ;)

[@ocalcetas1]

My 2017 Taco is still stock. I want to get 33’s and not have issues. Your setup seems to be PERFECT. Great job.

[@BrosFOURRSpeed]

I have a lift on it lol, you might have rubbing with a stock truck.

[@reeseperry8171]

What offset did you go on your rims and what exact size are your Nitto's. I have some 285/70/17 coming in with a Fuel D648 with a -12 offset and I have a 3 inch lift front and back. I hope they do not rub. Why don't you like spacers?

[@BrosFOURRSpeed]

The wheels in this video had an 18x9 +10 offset with a 33x12.5 tire. My next set was 17x9 0 offset with a 285/70/17 and didn't have any rubbing until I added the 1.25' spacer. I had the spacers on for awhile until I went up to 34's. Spacers are ok if you do it right and calculate for the offset of the wheels so it's a good setup. With the -12 you have, you may have some slight trimming to do, but it shouldn't be anything crazy. Possibly the CMC maybe, but maybe not!

[@flipmode9236]

just want to very verify. so the rims are +10 offset. what was the stock offset. +12? also what setting did you use on the spc. u had so much room from body mount?

[@BrosFOURRSpeed]

Yeah these wheels had a +10 offset, the stocks are around +25. My original alignment was set at the stock setting because I didn't know how to adjust them properly. But now I have them adjusted properly and you can see all those settings in this video!! I have 34's now with a 0 offset wheel and 1.25'' spacers with zero rubbing! It's a great setup! kzbin.info/www/bejne/g3uuaZZmpad-htU

[@brianmitchell927]

I'm looking to get get a 2019 trd off road. And i want to get it lifted and put all terrain tires on. I don't know much about trucks and would like some suggestions on lift size and tire size. I'm looking to spend around a grand on the lift and about 200-250 bucks on each tire. I want to go off roading in colorado every now and then. I would really appreciate any suggestions

[@gurban333]

give your shops some shot outs man. they are nice enough to let you film!

[@twentyonetoone9783]

What sensors did you go with? any issues with them, reprogramming them?

[@BrosFOURRSpeed]

This was so long ago I can't remember, but just generic sensors and with the programming, it took like 10 miles or something like that to sync up! I didn't have any issues with them!

[@Jsifuentes34]

What lift kit did you get for the Tacoma?

[@BrosFOURRSpeed]

It's an OME kit! Here's all the components I went with! Best lift I've ever had! kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@fneal68]

looks good. a little close for my liking , why did you cover up tires with a tarp?

[@BrosFOURRSpeed]

It was pouring rain and I didn't want water inside the tire after the wheel was put on them, so I wanted it to be bone dry.

[@Rollingrock72]

Where did you get that grill? Sick!

[@BrosFOURRSpeed]

That was from BP Fabricating! Not sure they still carry it, but have some options!

[@clunacy]

Looks like it should handle the mall lot pretty well

[@andrewp1512]

BEHOLD, another mall crawler is born.

[@Buddy_7522]

I don’t understand the mall crawl reference. Meaning the tires can’t handle off-road? Sorry I’m not hip to the lingo.

[@whatfreedom7]

I saw a nice Tacoma for sale used. I’m looking at it has skids,nice bumpers,lift,off road tires and I’m thinking damn I should trade mine in for it. I look closer under it and it’s 2wd,lol. I was thinking WTF?! Who does this to a two wheel drive?

[@Xx_Sterbern_xX]

@@whatfreedom7 cool story bro

[@matthewking4470]

whatfreedom7 prerunner lol

[@Yllivan100]

Couldn't you cut part of the fender or would that void the warranty ( assuming you have one)

[@BrosFOURRSpeed]

No need to cut the fenders with no rubbing, and that would not avoid my warranty.

[@Yllivan100]

@@BrosFOURRSpeed i guess i meant inner wheel well but thanks for responding

[@taylorsnyder3329]

Love man! Getting 285 70 17s on this weekend. Bilsteins in 2 weeks. What's that tailgate wrap? I want to take my stickers off my letters and do what you did!

[@BrosFOURRSpeed]

If you start at 9:21 in this video, we just used matte black vinyl! kzbin.info/www/bejne/rmTEdoaiqbuXsKs. And start around 5:04 here to see the sticker removal! You'll have fun with the Tacoma for sure!

[@taylorsnyder3329]

@@BrosFOURRSpeed thank you!

[@BrosFOURRSpeed]

Your welcome!!

[@MitsuFQ400]

I agree wrong size wheels. 16's and 17's look lot nicer on these tacos

[@isabelavelez4566]

I learned that the hard way! Never again

[@colesknolljr5904]

@@isabelavelez4566 then your lift is wrong.....go Icon and 33X 11.5 are perfect fit

[@northernlifts5564]

I had the same exact issue on my Canyon. My tires we rubbing on the lift knuckle. The wheels I got were +18 offset. I opted to get the 2” bora wheel spacers. Gave me plenty of room and plenty of stance.

[@elguruj8792]

Where you get those fenders?

[@BrosFOURRSpeed]

The fender flares are stock, that's how it comes.

[@renzcortado4597]

Cover tires with a tarp so they don't get wet? Then drives in the rain

[@BrosFOURRSpeed]

We put a tarp over them to transport them to the shop so the insides wouldn't get all wet before mounting. Easier to do this then have to wipe them all dry at the shop. You always want as little moisture inside tires as possible to prolong TPMS and valve stem.

[@DMHal01]

Yeah how does it handle now? Did you regear yet? I had to going up in tire size just to get it back to performance.

[@BrosFOURRSpeed]

Until I do the regear, it really hasn't made a difference, I did get the pedal commander in the meantime and it makes a good difference, but so far I don't see the need to regear.

[@DMHal01]

Bros FOURR Speed - Really? Here’s the formula; desired tire size x your gear ratio divided by original tire size = gear ratio needed. Obviously you’re not really wheeling off-road. What’s your MPG? what’s your RPM range at 70 mph?

[@DMHal01]

Bros FOURR Speed - pedal commander doesn’t fix the shifting issues related to the high gearing and adding big knobby tires and a lift throws the stock tune shift points out of wack.

[@BrosFOURRSpeed]

@@DMHal01 I go offroading a good bit, and no issues. What's your experience in your tacoma? My mpg is around 18.5 and at 70mph I'm at 1700. A regear with 5.29 would put it at 2200. I have seen a difference in the shifting with the pedal commander depending on the setting I have it on, so it does help. I also don't have knobby tires either.

[@DMHal01]

Bros FOURR Speed - I’m at 700 ft ASL and maybe there’s a difference in altitude but I’m running 4.88 regear with 4.88 OVTune 2100 rpm at 70 mph with roughly 18 to 19 mpg if I’m mainly staying hwy but combined I’m mostly at 16 to 17 mpg. I’m running a 2” Dobinson’s strut and coil lift with a JBA adjustable UCA for caster, 285/75/R16 and I have a CBI T3 winch bumper and Smittybuilt X20 winch with synthetic line and Factor 55 recovery kit. On the hwy when approaching any grade above 3% it used to gear hunt. The regear changed it and I don’t gearhunt anymore so I’m mostly getting my mileage by avoiding that. Did they change something on your model? You’re not running 200 extra lbs on the front end and your aerodynamics is better with the factory bumper so I can see that. I have a 2017 TRD-OR with the TSB making it the 04B04 ECU tune. Whenever you go up in tire size it effectively changes the rear axle ratio so I’m baffled as to how you’re not seeing a slower off the line performance and bad MPG’s when you go up that much in tire size, ply rating, and no ECU reprogramming and gearing change.

[@nicktoole7470]

When the suspension flexes? Mine rub over large bumps.

[@colesknolljr5904]

you have wrong suspension then..lol...you went cheap way out of a lift then

[@2009reezen]

My 2018 Tacoma shifts a lot with stock wheels and tires. How much worse is it with 33’s?

[@junnijune6597]

What is the height at the top of the roof after the lift and 33’s

[@BrosFOURRSpeed]

I haven't measured that ever lol, I'm 5'10, so I'd say somewhere around 6'3 or so.

[@marioncobretti7082]

What year is your taco???? I'm looking for fender flares for my 2020 double cab. If anyone in the comments can help me out it would greatly appreciate it . Also just stumbled upon your channel, great content. Keep it up

[@BrosFOURRSpeed]

2017. I have flares coming next week! Video will come after that!

[@DustinAplin]

Why did you get a +10 rim? A 0 or -12 rim would have been better? Research, research, research! @customoffsets would have been very helpful.

[@ogkg5875]

Maybe he doesn’t want to ride around looking like EVERYONE else.

[@agustinherrera5600]

Hey how tall is your lift ? I have a 3” lift on my 2016 tacoma and i want to put 285/75/17 ‘s on my truck but im not sure if they will rub what do you think ? Will they fit without rubbing ?

[@BrosFOURRSpeed]

I have about 4'' up front and a 3'' in rear. The tires I have now are 285/70/17 and with an offset of 0 only on a very hard turn fully cracked will it just touch. I'm not worried about it until I get a more aggressive offset on the wheels so you should be good with the right wheel.

[@agustinherrera5600]

Your wheel shows 33x12.50 so does that equal 285/70/17?

[@agustinherrera5600]

Also you mention about offset . If i get a negative offset is it a higher chance of rubbing ? The reason because now my tires are real close to the control arm and i want a negative offset to fix that

[@BrosFOURRSpeed]

Agustin Herrera No, I got a new set up a few months ago, so they are 32.8x11.7. The more negative the offset, the more it will be closer to the cab mount.

[@agustinherrera5600]

Ok thanx for the info . Nice truck by the way

[@lonniisenor4985]

Is it too close for off road? I'd like to do this lift but I well be doing a lot of off road driving.

[@BrosFOURRSpeed]

I have a few videos with this setup on the trails! kzbin.info/www/bejne/i6XUlpp6h9icsKc. It is close and there was the slightest rubbing on hard turns Offroad, but it was the largest setup I could do without trimming. I have changed my setup though and have a different offset and a little bit smaller tire, so it is possible to get a setup and not do any trimming. kzbin.info/www/bejne/r5SqZGOimpmKhpI

[@Brenny627]

Do you think tires the same size but a little less aggressive would have a better fitment

[@BrosFOURRSpeed]

I could have gone slightly smaller on the tire, not as wide would have given more room obviously, but I'll be able to make these ones work! It would have been a lot more work to fit them if I had a negative offset on the wheel too, so that definitely helped.

[@sc4261]

So what happens when you air down?

[@BrosFOURRSpeed]

Nothing!! Still no rubbing! That doesn’t make a difference! Here’s a vid on that! kzbin.info/www/bejne/jpnUgGyVjtSXb7s

[@chasepoole9037]

What interior blue lights are in the truck?

[@BrosFOURRSpeed]

They are from advance auto, just the led strips they sell.

[@peachybiscuit4531]

Hey how did you get that black trim along the doors? I would like to get that done on my Tacoma as well. Thanks!

[@billocampo1365]

Just a question how much did that all cost you..I wanted to do that to my 2006 trd sport

[@BrosFOURRSpeed]

I'll make a video on that soon!!

[@blaisecbetten]

where’d you get that exact lift kit from and how much did you pay altogether?

[@BrosFOURRSpeed]

I ordered it from Headstrong off road, I'll be making video soon on the cost of the whole thing so far!

[@marlonm396]

Congratulations.. Truck looks amazing.. Let me ask you, did you have to calibrate the new wheel sensors to the computer? how did that work? Enjoy the new look.. Cheers!!

[@BrosFOURRSpeed]

I will be doing that this weekend actually since we didn't get the tires on at the shop, so I'll show how that works.

[@CoffeeAndBusiness]

Anybody know the biggest tire that will will fit on my 3rd gen without a lift and without rubbing?

[@BrosFOURRSpeed]

I actually made a video on that! kzbin.info/www/bejne/j5CTgqCYat6ZqZI

[@Brararaf101]

what about when u hit a bump thats to close for comfort

[@BrosFOURRSpeed]

No issues! This was a perfect setup with minimal rubbing! I now have 34's on the truck and since this video, did the CMC and with my adjustable upper control arms, pushed the tires .5'' forward for even more clearance!

[@jimh2061]

Would a different offset rim help give more space?

[@BrosFOURRSpeed]

Yea it would, I have since changed up the wheel/tires since this video, but this was a close as you could go and still be ok with clearance.

[@lg8054]

I am confused now. Did you put the new tires without making other changes to the vehicle 0r not. You have other video where you made other changes.

[@BrosFOURRSpeed]

I didn't have to do anything but put the wheel on..no spacers or cutting or anything like that.

[@jonathanmendozan3]

Where did you get that grill!?

[@BrosFOURRSpeed]

From BP fabricating! Here's the video on that install! kzbin.info/www/bejne/bICapWxrf5dqbMk

[@ARayHolder]

I have a 2018 Tacoma with a leveling kit, 3 inch front 2 inch back with Fuel Vapors and 285/75/17s BFGs and no rubbing at all even completely locked out on a turn and looks awesome. It can be done

[@BrosFOURRSpeed]

Awesome! I don't know why some people don't believe it, glad you have no issues either!

[@nikolas503]

This gives me confidence for my 2018 taco... i just bought 285 70 17s and rims with 0++ offset. With my 3 in front and 2 inch back lift i should be fine with no rubbing yeah?

[@ARayHolder]

The Niko Experience I think you’ll be totally fine, I have a -12 offset they clearly can be seen sticking out and do not rub when completely locked out on a turn.

[@ARayHolder]

The Niko Experience hit up America’s tire, they’ll let you know what can and can’t be done that’s who I went with for rims and tires

[@saulgarcia4761]

Can load a pic of ur taco

[@thepokerpilotapp]

Would it rub if you were to air-down?

[@BrosFOURRSpeed]

Nope, airing down doesn't affect that at all, the rubbing depends on the offset of the wheel and how wide the tire is.

[@phoslurperr]

When you go with taller tires, do you need to do anything to adjust speedometer and odometer or is it not enough difference to be of any signifigance?

[@Mrpobra]

I have a 2006 with 3 inch lift and 33's x 12" and i had to do some trimming up front and cut off a little bit of the chassis support in the front also .

[@thynysan]

What's the tire specs on this. That gives us an idea of what to work with.

[@BrosFOURRSpeed]

They are 33x12.5x18.

[@sgtpetej1]

How’s the gas mileage on your Toyota Tacoma with the big new tires? I have a 2017 Toyota Tacoma want to put a lift kit 3 inches. But gas mileage is my concern, I get 20 miles to the gallon average.

[@BrosFOURRSpeed]

Pete6 Holguin0 I averaged 17 before, and it’s still around 17. As long as your not flooring it all the time. The added rotational mass really won’t impact it.

[@justinlohman454]

I have a 17 and never. Get 20 mpg stock unless I baby her. I'm looking at a lift and more rubber but I'm not expecting anything more than 15 mpg.

[@jonathonnordyke]

The problem is if you guys do any serious off-roading it's going to rub

[@DMHal01]

JLNProps - yah not too mention he probably didn’t even regear. Which will suck the life out of that truck and it’ll struggle.

[@BrosFOURRSpeed]

@@DMHal01 No issues man..and slight rubbing offroad, but nothing crazy. I didn't even have to do the cmc yet.

[@dant3113]

Bro you really think these dudes be off roading 🤣

[@Taylor314T5]

Wouldn’t it rub the wheel well when the suspension is compressed?

[@BrosFOURRSpeed]

No, there is so much room even fully compressed, and the bump stop would prevent that. Maybe a larger tire would, but no issues with the 33s.

[@Tacoexplorer]

Nice. Looks awesome! I am getting the same tire tomorrow but 285/75/17 on my Tacoma with SCS Ray10 wheels. I have icon tubular UCAs and they should not rub.

[@doorkicker8507]

Just bought 2019 Trd off road and put a 3 inch lift with 33s. Had to put spacers on. Because on tight turns tires will rub.

[@maiyang7046]

Hey bro four speed why did you say when you lifted your truck 6 inche why did you say is a nightmare

[@maiyang7046]

😅😂

[@BrosFOURRSpeed]

CV axles kept going out and it rode like junk! This lift on my blue Tacoma has been 100 times better and more capable offroad!

[@BrosFOURRSpeed]

It wasn’t worth it to me with the problems I had.

[@hotwheelsracing7641]

I have a 4 inch lift on my Tacoma with 33s and they only rub on turns with big bumps.

[@BrosFOURRSpeed]

Nice! I didn't have much rubbing at all expect for in reverse turned all the way and some spots on the dirt! I want to go a step up soon and do the cmc and some trimming now!

[@candyman190]

What song is that @ 3:50!? 😍😍

[@axelforsgren563]

Magical by Loving Caliber

[@akeallee2883]

What about when you’re off-roading and the suspension flexes and brings the wheels closer into the arch

[@BrosFOURRSpeed]

I have to test that and see, I'm know there will be some minor trimming.

[@sethglenn9022]

Its one thing to test for rub on a flat garage floor. But you will still have to do some trimming to prevent rubbing on uneven ground. You can get away with however little space you have at the control arm. But do not get rid of them or alignment will be nearly impossible. You can use the camber adjustment in the control arms to make more space between the tire and the UCA at the alignment shop. If you plan to use a spacer, get hub centric spacers, also consider longer wheels studs because the Toyota has short studs and you cant achieve proper thread engagement in the lug nuts. Truck looks great though. 22x12s would have been cooler 😏

[@BrosFOURRSpeed]

This was actually almost a perfect setup. Only aggressive off road with the wheels fully turned, it would barely hit the cab mount. But not enough to need any trimming.

[@rodtube2827]

What size rims are those

[@BrosFOURRSpeed]

These are 18x9 +10, I haven't had those for a while, but they were a cool setup!

[@renatolavilles9962]

What is the size of your wheel and tire?

[@BrosFOURRSpeed]

This setup is a 33x12.5x18.

[@roughpatchroad]

I'm looking at putting 35s on my Taco! Way to many supporting mods to stuff 35s

[@BrosFOURRSpeed]

I don't think so, I have friend running 34's with just a lift and minor trimming. I'm going to be regearing soon I think, but not much more for them.

[@roughpatchroad]

Bros FOURR Speed cab mount relocation, pinch weld fold, fender trim.. Which 35s are you looking at?

[@BrosFOURRSpeed]

@@roughpatchroad Just the cmc and minor trimming, he didn't do the pinch weld or relocation. He's running 305/70/17 which is 34x12.5 or should be close.

[@traviswenzel6159]

It will rub on the control arm I had one with a little more room than that and if I took a sharp corner that had a small pitch and it rubbed like crazy almost made me wreck

[@BrosFOURRSpeed]

Oh wow. I'll be doing some tests to find out what spots rub. But so far daily driving I've had no issues.

[@cozzy223]

Was this tacoma in atlanta for supercross?! If not you have a twin. I was admiring while it was in traffic.

[@BrosFOURRSpeed]

Yes!! I was at that race!

[@cozzy223]

Hahaha very random I watch a video a few days later and see it. Clean truck man, love the ditch lights installed now. I was the weird guy walking on the side walk eye balling your truck. I have a 16 trd OR.

[@BrosFOURRSpeed]

M .Cosby Haha cool! I did notice someone looking at it, now I know who!

[@cozzy223]

Right on! What kind of decal/protector is that around the bottom? Havent seen that before.

[@BrosFOURRSpeed]

M .Cosby It's matte black vinyl, I did that for offroad use and not running mud flaps it helps protect the paint too. kzbin.info/www/bejne/rmTEdoaiqbuXsKs

[@tims0185]

Where did you get your blue radio bezel?

[@stantate1747]

I see popped front tires in your future, its gonna hit the UCA when you go offroad.

[@BrosFOURRSpeed]

This setup never hit off roading. And I did a ton of adventures with it

[@stantate1747]

So you installed 1.5" spacers in the front with the new tires?

[@stantate1747]

My bad, didn't see you were changing the wheels to a different offset.

[@SuperMustang512]

Nice! What is the total height of your truck now?

[@BrosFOURRSpeed]

Roughly 4inches. I have a comparison video coming. I gained a ton of height

[@castanonj2011]

@bros four speed Hey buddy with that lift do you have any play in the steering wheel or it feel like stock?? And what kind of lift you use for the front?

[@BrosFOURRSpeed]

It feels like stock, and here's a link to the lift kit video so you can see everything.. kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@agustinherrera5600]

What brand and width are those tires

[@BrosFOURRSpeed]

They are Nitto Ridge Grapplers - 33x12.5x18.

[@Rockdaground]

You got the offset of the wheels just right. Great job. I have zero offset on my wheels so I might rub a little.

[@BrosFOURRSpeed]

Rockdaground You might just barely be rubbing, maybe a little more trimming than me, but compared to negative offsets, you're in better shape like me.

[@tackcoma5280]

I have 33's on my Tacoma with a 2" level kits and its doesn't rub when driving normally but its does rub when coming up my drive way at an angle just not as bad that you need to shave any fender off. My wheel is 20x9 with a offset of 1.

[@BrosFOURRSpeed]

Did you do the CMC? I'm probably going to have to cut the corner of it off at some point, need to see first.

[@tackcoma5280]

It’s not bad to a point where you have to do an CMC, you can use a heat gun and bend all them fender liner in. If you plan to go off road, I recommend investing in another set of wheel mainly for off road. This set up would not work. Good Lucky with the rest of your build and do what you love.

[@codymol1goolsby450]

On my 2010 with 18s and 33s with 6 inches I'm not scrubbing any

[@topnotch1386]

You will be fine going down the road and turning unless there’s a bump or off camber turn. But you can always fix that with a heat gun and work the wheel well liners up front. If you’re doing a lot of off roaming they make cab mount cut kits for the backside of the front wheel wells.

[@BrosFOURRSpeed]

I'll have to look into the CMC once I go off road and see if its needed, probably have to do it.

[@gamebreak81]

Whats size wheels and tires?

[@longevity7264]

Where you guys at?

[@BrosFOURRSpeed]

This was at Rimz One.

[@marcusmendoza9354]

Should’ve gotten more offset on the wheels, I wouldn’t go back to stock uppers

[@joluar78]

Looks great! I put 33’s on my Taco earlier this year and had to do some very minor trimming on the back side of the wheel wells. You looked excited once the alignment was done.

[@BrosFOURRSpeed]

Yeah I'm pumped about it! No rubbing at all for normal driving. We'll see about hardcore off road. But worst case I might have some small trimming to do, which is no big deal. My 07 Tacoma rubbed a lot at full lock on flat ground with smaller tires. 3rd gen is set up great for this.

[@Fishwish24]

Cost difference between your build and a trd pro?

[@BrosFOURRSpeed]

Dmoore_714 Ill be making a video on that soon! Definitely a lot cheaper though! I like the pros, but if you buy one, it'd be a waste to lift it I think.

[@mrbdawg11]

what sliders do you have on there?

[@BrosFOURRSpeed]

Victory 4X4

[@davidnilles3117]

Looks absolutely great guys. I know you’re excited to have it completed!

[@BrosFOURRSpeed]

Thanks!

[@marioremington345]

i dont mean to be so offtopic but does any of you know of a way to get back into an instagram account?? I somehow lost my login password. I appreciate any help you can offer me.

[@blainedarian9757]

@Mario Remington Instablaster ;)

[@marioremington345]

@Blaine Darian I really appreciate your reply. I got to the site thru google and I'm trying it out now. I see it takes a while so I will reply here later when my account password hopefully is recovered.

[@marioremington345]

@Blaine Darian It did the trick and I finally got access to my account again. I'm so happy! Thank you so much you saved my account!

[@darriontunstall3708]

Great video guys!!! That's looks excellent!!! I love it!!!! Yall did a awesome job!!!! I can't wait for y'all next video.

[@BrosFOURRSpeed]

Darrion Tunstall Thanks!

[@darriontunstall3708]

@@BrosFOURRSpeed yall welcome

[@tjs1tjs3]

If you take a tight turn at some speed. (Mountain driving) the body roll will cause the tire to snag the uca. Highly recommend a small spacer. Your set up looks exactly like my first one and I had the same problem. Overall looks great!

[@BrosFOURRSpeed]

Turner Suhler interesting. I’ll do some test to see if I run into that. I have almost 1/2 inch of clearance to the UCA, so I’ll see if it still clears

[@ProjectDIY2]

Nice! What are the specs on the wheels and tires?

[@BrosFOURRSpeed]

Greg Thomas The wheels are 18x9 +10 and the tires are 33x12.5.. heres a link to the wheel vid if you haven't seen it.. kzbin.info/www/bejne/lX3Ehmx6p7SLhKc

[@DylanGalman]

Do you feel a power loss because of the lift, wheels and tires? Thank you in advance for your response.

[@BrosFOURRSpeed]

Dylan Galman So far it feels the same. I still get about 17mpg. I never really floor it so I don’t ever actually use all it’s power. But I’ll do some tests like flooring it on the highway to see if it feels sluggish

[@DylanGalman]

@@BrosFOURRSpeed Interesting! Usually people say that gas trucks are sluggish after lift, wheels and tires. It's great to hear that yours still seems to maintain power. I appreciate your response! Congratulations on your upgrade by the way! I can't wait to do mine.

[@mogwaigizmo-chibi8810]

He must have some sort of super truck that defies everyone else's experiences. I floor mine with 33's and can't even get the tires to spin and break loose unless it's raining.

[@DylanGalman]

@@mogwaigizmo-chibi8810 My stock Tacoma won't spin it's tires if I floor it unless it's on dirt.

[@mogwaigizmo-chibi8810]

+Dylan Galman Bummer. My other stock 2018 spins fine with traction control off.

[@237311]

I like those black color paint above the steps, did you use plasti-dip on that?

[@cashmiller2999]

Looks nice!! Do you thing you’ll have needle bearing issues with this lift?

[@BrosFOURRSpeed]

I don't think so, I had a 3'' lift on my 2nd gen and never had that issue, only when I went to a 6''' did I have to replace that, so I'm hoping not with this set up.

[@kjpstorm]

What tire pressure u set?

[@BrosFOURRSpeed]

I normally run around 34, seems to be doing fine on the road.

[@cbar2222]

Wow, a lot of hate down here. That's unfortunate. Anyway, how are you liking the lift so far? I'm looking to get the same lift soon.

[@BrosFOURRSpeed]

I love it! I will be making the 500 mile review of it this weekend to go over everything so far!

[@schristiansen3151]

I'm guessing the tires will rub on the UCA's at full droop. You'd be wise to cycle the suspension through its entire range and turn the wheels to check for clearance issues before you go offroading. It would be a shame to chew up your tires or suspension components for lack of checking.

[@BrosFOURRSpeed]

Yea I have checked everything and different angles, and offroad there is zero rubbing on uca or even the cab, so it's a perfect set up!

[@schristiansen3151]

@@BrosFOURRSpeed Awesome, and you didn't have to use spacers. Glad it all worked out for you!

[@en8052]

What's the song starting around 3:54?

[@axelforsgren563]

Magical by Loving Caliber

[@danieldehay5270]

What size wheel, tire, and lift? I literally bought my new tacoma Friday. I need a few good ideas in which direction to go

[@vins1521]

Looks great dude, how much for the wheels and tires..?

[@charlesslagle5469]

what exhaust are you running?

[@BrosFOURRSpeed]

It's the cat-back AFE.. kzbin.info/www/bejne/lWWzXn1-g5p7jq8

[@legendsalbahe4916]

Did you lift that how many inches?

[@Theyralltakenfu]

NO WAY would I drive that with that tiny bit of space near the wheel. The truck looks really nice, but I'm afraid that over time something is going to happen and you're going to pop a tire and lose quite a bit overall. Putting in a spacer isn't going to kill the look, just maybe make it safer in the long run. That's only my opinion.

[@BrosFOURRSpeed]

That's a good point, I still have some adjustments that I can make, but right now it doesn't touch at all so I'll keep an eye to see what works best.

[@smitty4699]

it's never going to touch. 1 cm might as well be 1 mile

[@BrosFOURRSpeed]

smitty4699 That's a good point too. I'll make a video off the pavement to show what it's like.

[@Theyralltakenfu]

@@smitty4699 You really think so.. Well, you have more faith in this then I do. Haha I'm finding this a learning lesson and very interesting.

[@isabelavelez4566]

Agreed!

[@ddnmd]

Why didn't you send the rims back and get bigger back spacing?

[@fatins5849]

What was the First size??

[@07cbailey07]

One pothole or speed bump to fast and goodbye wheelwell and your alignment. City truck

[@bsc285]

David Spade!!!

[@cesarcardenas8573]

Were u get that Toyota grill btw

[@kaydengilmore4840]

what size are the tires?

[@BrosFOURRSpeed]

They are 33x12.5x18

[@mikeschoolcraft21]

What is the offset on the stock rims?

[@BrosFOURRSpeed]

They are +25.

[@morganlopez7922]

I have a 3rd gen Tacoma myself with a 3.5 inch lift and 33s, I still rub when go up steep driveways or when I’m turning on a bumpy road (rocking side to side) I don’t have a CMC yet No issues with UCA’s

[@BrosFOURRSpeed]

What are the specs of the wheels you are running?

[@kennydodd5681]

Looks good,I'm 58 love my Toyotas, I have 96 tacoma, I'm just not into lift or going to any other wheel other than Factory!! But don't get me wrong, looks good got (4) yrs. going retire going get new Tacoma then anyway buddy I'm happy for u !!

[@BrosFOURRSpeed]

Very nice man!

[@dimitrivaqueros7883]

so here is the thing, it looks really good, you might rub when you turn and there is a bump or even a little bit, it rubs in the inner side I know because I have a icon stage 4 and even is a great suspension it does rub sometimes and I have 3 in lift up front, other than that you would love the capabilities of your truck now is lifted it was about time, have fun

[@BrosFOURRSpeed]

dimitri vaqueros Yeh so far normal driving there’s no rubbing. We’ll do some test off road to see what will need to be done as far as trimming

[@ApplianceRep]

I have a video of my old tundra truck in quicksand color. I lugged around the steel bumpers and heavy rims for a while until I traded it in for a tacoma inferno way better in maneuvering although I do miss the power of the tundra went from 12mpg to 21mpg

[@johnwacker]

I literally just bought 33s and the same lift last night. I saw this thumbnail and almost died. So glad it all worked out!!!! 😅

[@BrosFOURRSpeed]

Oh dang lol. Yeah we were scrambling for a bit when they test fit the wheels, but it helps to test fit wheels using the lug nuts to hold them straight lol