The Bullet Proof Plates I Use Inside My Vest!

[@556RF]

“Here’s my plates from last year” What’s currently in your vest?

[@HolyRider22]

clearly not ceramic lmao

[@vicerichter1163]

Either lvl 4 or the new propylene plastic composite armor. Its not hard to figure out what gear he uses. Lmao. The new composite armour from ar500 just came out.

[@Themodeling_airjordan]

Good question

[@THOBART05.]

Why recommend ceramic instead of steel? I know nothing lol.

[@448bussdown]

ceramic is lighter & its better at absorbing & dispersing the bullet’s energy, with steel plates theres a higher chance of breaking something since its straight up steel to steel & depending on the caliber, bullet going to hit the plate like a truck !! although steel is more affordable, it isnt the best

[@THOBART05.]

@@448bussdown Oh ok. Thanks.

[@THOBART05.]

@@Tap_rack5.56 I'm British so I don't really know much about guns lol.

[@SZ0H6]

MAY GOD BLESS AND KEEP YOU ALL IN THE NAME OF JESUS BECOME DISCIPLES OF CHRIST AND

[@THOBART05.]

@@SZ0H6 What are you going on about?

[@Kochie11]

For the anti-steel comments, your opinion is valid but not always correct. Yes. Steel has issues with shrapnel and spalling but GOOD steel plates have coats that contain shrapnel from bullet impacts like how a Ceramic would. Steel works and was used by the military for a long time, you just need to go with a trusted manufacturer and do your research. Not all armor plates are made equal, just like ceramic. Just like Kevlar.

[@tylerkinley268]

Right? There's plenty of tests by numerous different channels showing that a quality plate manufacturer will make a quality anti spall coating.

[@BUZZKILLJRJR]

If you're going to wear metal plates then you need to wear protection for your chin and neck. they make neck protection for spalling so get it. And if that's the case I would also get something for the inside of your arms it's a metal plate it can take way more rounds then ceramic but there's also more gear involved for Spauling, probably not enough to weigh enough to make a big difference in your kit, but it's just something you have to take into consideration. they have small plate sleeves you can get now to catch the spalling as well, all kinds of stuff today, you just got to make sure you get the appropriate stuff for the Armor you're getting. Good luck boys and god bless America.

[@tseliu4716]

Frag Wrap?

[@whiteblackgrayman]

I'd try these newfangled "steel jacket bullets" he speaks of...but I like my barrels a little too much.

[@LeGiT_AuTiSm]

Just get the new aluminum one use barrels, works great just gotta melt it down after every mag and re cast it. If it blows up you always got a spare

[@stealthsnakes-2268]

​@@LeGiT_AuTiSm what kind of american joke is that

[@FighterGlitch]

​@StealthSnake S-22 this is America how dare you call the one use barrel a joke!

[@kazzzi.]

Good question

[@shockwave6213]

Cheap ammo by companies like TulAmmo, Red Army Standard and Wolf use what's called a Bi-Metal jacket. Its a mild steel jacket with a thin coat of copper over it. It's cheaper than full copper jackets despite the extra extrusion process in manufacturing because it reduces the amount of Copper (a relatively expensive metal) needed to make Billions of rounds

[@proslayer101]

For anyone here thinking of getting plates, do not get steel. Compared to ceramic or PE, they are extremely heavy and after wearing it for about an hour of clearing the basement, you'll be ready to take your kit off and rest. If you've already bought them, they're great for a weighted jogging vest or as targets 😅

[@silverandblackentertainment]

Ah you get used to the weight after a while. I wear mine like nothing now 👌🏽

[@BBB0108]

One pro to steel plates tho, you can take multiple hits to the same spot, with ceramics 2-3 shots and its going right through

[@nahhh925]

i run a steel plate it the back and a ceramic up front

[@MrSwccguy]

​@BBB0108 you're smoking dik

[@c03_psychie20]

Yeah no, the weight doesn't bother me that much

[@milkisawesome69420]

762 millimeter full metal jacket

[@whiteblackgrayman]

Flying under the radar. Nice 😎

[@milkisawesome69420]

@@whiteblackgrayman I am in a world of shit

[@whiteblackgrayman]

@@milkisawesome69420 Locked and loaded

[@milkisawesome69420]

@@whiteblackgrayman left hand hauh

[@muertez666]

@@milkisawesome69420 Ain't war hell? HAHAHAHAHAHAHA

[@doblingamez1731]

Last year you did spin art. Highly doubt you had a plate carrier for spin art. Hitting do not recommend and unsubbing.

[@ravvaktheannihilator69]

Dude don’t know anything about plates

[@03tarserov64]

Lmaoo AR500 plates aren’t NIJ certified there’s a video on KZbin about it, u absolutely right this guy a joke

[@johncena-hq1ti]

@@03tarserov64 these plates work fine and he was right about ceramic being better

[@Tap_rack5.56]

@@johncena-hq1ti these plates work fine as targets do not put these on ur body unless u want to die

[@johncena-hq1ti]

@@Tap_rack5.56 not really

[@elijahreeves4890]

@@johncena-hq1tiyes really

[@michaellothyan1789]

They make spalling sleeves for steel plates 🫶🏽

[@BeingWellRegulated]

They make anti spalling bags to put the plate is that help more with the spalling. I think for the vast majority of people just wanting to exercise their rights, steel is fine. Especially if they get a plate with good coating and a spall bag. Plus must steel plates will continue to eat rounds from its threat level pretty much indefinitely through after a few shots ull have a lot of copper and lead flying around.

[@vicerichter1163]

Problem with steel is that its not boyant, its heavy, and poses a risk to spalling. Unless you have a quality plate carrier with thicker padding and also that you put a spalling blanket over it. Its still not guaranteed and also its bulky and heavy when press out your plate carrier vest and you cant shoulder up your rifle effectively. Some food for thought

[@vicerichter1163]

Also steel doesnt stop m193 rounds or m995 if it travels faster than 3300fps. It will punch thru and you're boned. Lol. Ak is even worse if you find steel core and shoot it out of an rpk. Best believe it is punching thru lvl 3+

[@vicerichter1163]

Also steel doesnt stop m193 rounds or m995 if it travels faster than 3300fps. It will punch thru and you're boned. Lol. Ak is even worse if you find steel core and shoot it out of an rpk. Best believe it is punching thru lvl 3+

[@InGodWeTrust224]

Us: “Can you show your plates please” Him: “great question”

[@DMTEntity88]

What if they shoot you in the head?

[@noodledajuice1114]

Spaling still come from ceramic. A lot less, but through my own experience and my chins experience they both spall.

[@KlASELI]

If you are an army vet tell me what ESAPI is spalling I’m lost here

[@noodledajuice1114]

@Kia re-phrase the question, please. Gladly will answer better. If it's what part? I had ceramic pieces in my chin removed and some metal flakes. Now, the ESAPI plates I had were very used and old and the impact was high chest. The spelling wasn't noticeable until I was told "hey your chin is bleeding".

[@c03_psychie20]

It's sad how people think ceramic doesn't spall, isn't it

[@jayheredia6975]

To anybody who has steel plates. Please put a frag lock aka spall cover on it

[@sachmo0196]

It's what I run! Had my daughters friend over the other day, had her put my tac vest on....ooo😮😢. Then handed her my HK93 w/26" barrel & extries. She being an a*s kicker asked..."how do you do it?"...way heavy! Said..."if you train on TOP, this weight means nothing!!!". 3/4 loadout, rounds, gear, med kit etc... did'nt even add pistol w/add-ons. Now...get over that 8ft wall! Hmmmmm. What she should have asked...."Water/food?" Yes, that too😂😊

[@RollingRigTraction]

Absolute FAIL to mention the WEIGHT😮. STEEL PLATES IF YOU'RE RUNNING FRONT BACK AND SIDE PLUS AMMUNITION ETC. IT'S HEAVY AS ALL FUCK. IT'S ONLY USEFUL FOR STATIONARY PROTECTION, GOOD LUCK RUCKING LONG DISTANCES WITH THAT EVEN IN EXCELLENT CONDITION.

[@rabbitseason]

Anyone who says steel plates cause “spalling” have no clue to what they are speaking on. “Bullet splash” is what happens against steel, which is easy contained using frag mitigation coating to capture any bullet fragments. You can also slide the plate in a splash cover to double up the splash containment. I would say if you are going to get plates, understand who you are and what theatre of war you will be dealing with, that you’d even need to consider a plate carrier to begin with.

[@MegaRespectKing]

LARPER final boss lol

[@carloswillis4895]

Everything is a good question with this guy, nice guy

[@piercequinlin]

No such thing as a stupid question.

[@tepapelailee1024]

He Sometimes Says After he reads The Guestion that ”Stupid Guestion”

[@inFAIMous03]

Even when it’s not a question 😂😂

[@tepapelailee1024]

@@inFAIMous03 yea😂

[@Chonkasaurus]

Arab wedding... Thats was definitely the spiteful father in-law dropping his new son in-law for doing some haram stuff... jk lol

[@vicerichter1163]

I love it when some wannabe tacticool guy acts all scared and doesnt wanna talk about what gear he actually uses when anyone who has spent enough time in the firearms industry can specifically tell you what gear he really uses without even looking at it. I know its the gold standard to use lvl3-lvl3a+ plates for police. But lvl 4 and above is the true standard for duty use; provided if you're a swat guy. Which he isnt. Not hard to tell. But hey do you. Lvl 4 and lvl4+ is not hard to get and not very many companies make armor to stop 50 bmg. Dayton armour is one of the few companies Iam aware of that makes a plate for anti-material.

[@Wade-1]

Checkout the Tacticon Armament plates. Ive never seen steel plates absorb as much spawling as theirs. Pretty crazy. Also if youre still concerned they are super good for training. That way when you have ceramics, feels like youre not waring anything at all.

[@mitchgamezz1642]

In my opinion I’d still buy steel. Yea ceramic is lighter and dissipates energy better but if you need that plate 7 years from now, can you trust it? It can delaminate and other stuff that steel won’t do. Those ar500 steel plates have a shelf life of 20 years and I guarantee you it’ll last 5x that. If you don’t want to spend big money on ceramic, just get steel. Odds are you’ll never use it anyway.

[@iamflashin]

🔥🔥🔥🔥🔥🔥🔥🔥🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

[@JoseTorres-ry9qe]

You got any armor that covers the non vitals like shoulders, knees, legs? helmet and face armor? Visor? Shield?

[@NomadHorizon]

Not really beneficial. It adds too much weight and hinders mobility. Your vitals are sonething that if it gets shot, you are likely to die without immediate care. Your shoulders, knees, arms, legs, all of those are important, but not as important as the stuff between the plates. You also have time to act on those injuries of you take a hit to them. Only protectipn outside of a plate carrier i would recommend is a ballistic helmet, and knee pads. Maybe elbow pads if youre going to be dolphin diving alot like in call of duty.

[@JoseTorres-ry9qe]

@@NomadHorizon i dunno man modern advances in graphene, spider silk production and other new AI-Discovered compounds leave much to be determined. Combat effectiveness of a unit is nullified with even a single round. Preserving the combat readiness of a unit should be paramount, determining cost reduction after

[@c03_psychie20]

You think americans can handle anything more than a pc and fast helmet? Funny. These guys will never learn despite the noho shooting that handed them their asses, they will still think lighter is better....untill you see the hog of a man that says it😂

[@Thetexan210]

Lmao steel plates 😂😂😂😂 Go ahead yall, get steel plates. They’re save you’re life and take your buddies 😂

[@RickN-v5u]

Steel jacketed bullets?..and your an operator?..🤣🤣🤣

[@benjaminderenzo6279]

Why would you say you don’t recommend ceramic but never follow that up with an explanation, I have both ceramic and steel and I trust ceramic way more than steel.

[@adlwon1197]

Still cant understand how COD characters carry like 10 plates with that size😂

[@Jakek1156]

“I’m hate you” him: “good question”

[@GoldenbergGaming]

It actually was a question this time

[@SemperVeritas.]

If the steel plate has a good coating the spall from the first few rounds won’t be a problem. But anytime a plate takes a round, whether is steel, ceramic or composite, it has been weakened and compromised. With coated steel that means in crease risk of spall, with ceramic and composite that means increased risk of penetration. I run composite but if steel is all you got it is better than nothing.

[@LaCal22]

Wanna see my plates I’ll show you the worst plates possible for ya ! How much that bad boy weighing in at … 1 plate weighs more then my whole carrier 😂

[@lil_693]

Steel if you're a larper protecting your home, ceramic if you're actually out doing work.

[@kermitclassified]

Is that a USP-45 Match in the background?

[@classychandu5090]

You look a lot like that dude that does spinning painting stuff

[@Fluffy-guy1122]

What do you mean by 7.62? 25? 51? 39? 54r?

[@mikeluna619]

Spall is the fragmentation from the plate created when the bullet hits the front of the plate . Splash is the fragmentation created when the bullet hits the steel plate. It’s always good to be smart and question everyone and everything because this clown is wrong about this and most likely about a lot of other things as well.

[@VEJ5528]

Unclear instructions i got shoot in the head and i lost 3 plates.

[@Shootingduck_vr]

Why does he actually look like soap am I the only person that sees that

[@samper7765]

Sooooo what are you running this year the same? lol

[@محمدسنوسي-ر7ل]

I think body armor for civilian is kinda of stupid bc it only cover the vital orgins if you get hit in streed fight anywhere else you will go down and you would be killed anyway if the attacker preceed to but in war when there iis a hole team with you it kinda make sense cuz if you get hit they will cover you and you might be saved later

[@GhostWave.1]

AR500 LMAO bro looking to catch more fragments and be slower than a turtle. get your ceramic IV plates fellas

[@c03_psychie20]

Problem is not steel. The problem is in the brand name and location. Ar500 in america

[@ssgamesstoreimphal1522]

What happen when projectile hits in same area of bulletproof vest

[@_bando_Ent]

That stole face shot is cheap asf don’t trust ur life w it

[@Joseph.904]

I get that steel is shit with a regular base coat but you can get fraglock to stop spalling🤷‍♂️

[@hollywierdtattoo]

That fancy coating on the plate… that’s to catch all the spalling, if it were just a bare steel plate yeah you got a problem but the coated ones your good to go.

[@vienle9918]

They did not grab it out of nowhere it was put it in backpack

[@zachwolf239]

steel wont spray frag unless the coating the plate is covered in is trash. yea a bare steel plate will but not with the coating it wont.

[@silverwig7782]

Anybody remember when he did spin art

[@IRobBankias]

Me I do

[@elijahreeves4890]

shouldve stuck w it

[@americanmade422]

Steel will save and also possibly kill you. Ceramic all day

[@Devious.Monkey]

Steel is also heavier too, soo plan accordingly

[@dannyzepeda3091]

Stop saying good question in every dam video bro

[@LordRahl11]

Why recommend something you are not using? The coating on the steel plate stops the shrapnel. But only on so many shots. So don't get shot a bunch.

[@TiberusV]

I'll make sure to tell the other guy that before he shoots me...

[@LordRahl11]

@@TiberusV exactly!

[@pjbiggleswerth8903]

Last longer than ceramic

[@jaytracy9162]

lmao mever understand lvl3 vest 556 gies straight thru them 762 or 308 would def push its way into that

[@arcanekingo5716]

I mean correct me if I’m wrong but can’t steel withstand more bullets though? Ceramic once it’s broken doesn’t stop much right?

[@feelixtheglovinggiraffe759]

The spot hit is weakened significantly but you don't have to worry about Spalding hitting you

[@arcanekingo5716]

@@feelixtheglovinggiraffe759 don’t they make coatings for steel plates though. I even saw stuff as simple as flex seal spray stopping spall.

[@disappointedfather5119]

You’ll want to replace either plate when it’s shot bc the moment it’s hit, it’s already compromised. Besides, if you’re getting hit multiple times, you have bigger problems

[@arcanekingo5716]

@@disappointedfather5119 True that. Fair point.

[@c03_psychie20]

​@@disappointedfather5119*laughs in north hollywood shootout

[@dorianj6080]

The ceramic fanboys always talk down on steel. Ceramic can’t take as many hits, they don’t spall but will leave a trail of ceramic dust wherever you run to take cover, more expensive and doesn’t weight much less. The average citizen would do better with lightweight steel as it is cost effective and reusable.

[@billybirfter18]

Not always about the hit it’s about energy transfer. Understandably yes steel will take more hits but ceramic does both of both worlds takes more than enough rounds for you to get out of fire and the bullet impact won’t be as “severe” as it would be with steel..

[@liameggen767]

Arnt you the guy that drives the cimii truck

[@angelicpowers3526]

Can you do a whole video on body armor protection

[@mathewporter5216]

What happens if you shoot a gun into another guns barrel

[@330_alpha]

ceramic i belive cans tand super sonic rounds

[@Unknown-cq1km]

Didn’t this guy used to do art or something?

[@jodywilke1847]

Show the Huns behind you please

[@thesingularityproject4042]

Spalling momentb

[@GokuSayian3]

Can u show me how do u remove the ammo and put a new one in glock-47

[@Mr.CleanUSA]

That’s a little much for a airsoft match

[@gerysquash4479]

Ummmm….what about kevlar?

[@fixednstoned861]

Homie is trying to get people killed with the AR500 plate 😂😂

[@Joseph_gomey3]

Wait what kind of 7.62x what

[@peybackthis1596]

Never use steel plates, ever. Low tier garbage.

[@R.E.A.P.E.R.]

What is the name the color of your vest

[@IRobBankias]

I miss the spin art so much

[@vietnamtactical]

He got a better hobby

[@99Yeti]

@@vietnamtactical it’s so silly though when he’s just talking to random comments

[@3.0699]

​@@99Yeti hes awnsering questions people have for cops the spin art got boring after like 5 of them they all started to look the same

[@GHOST_4084]

Can we use 8mm thick metal sheet as a amour plate???????

[@Tap_rack5.56]

If you wanna die sure, spend the money and buy plates

[@hersheybar57]

You would have died from Fragmentation of the bullet. Ceramic plates are way lighter than steel and will catch all fragments. If you wanna go lighter and more durable than ceramic then PE plates will be the best choice 👍

[@c03_psychie20]

Use UHH steel, glue some rubber coating on, glue a thin layer rubber foam on and finally glue and wrap nylon over all of the plate. You should then be good for even AP rounds if the plate is hardened

[@Grxg-11]

You should shoot it

[@9000yugioh]

Did you pay for them or did the department pay??

[@luciafelfela3476]

What vest do you use and flag patch?

[@bennytolentino9629]

It looks like soap from COD

[@Sam34511]

Yet he has spall coating on his plates 🤣

[@firstkhalid3888]

You wake up recently ???

[@louden6415]

You look like soap for call of duty

[@BlameLucy]

What are the pice on 1 of those plates

[@antdfwu]

Can you shoot your old plate?

[@MactheHusky]

Are you in the military

[@CitizenEdge]

I have level IV ICW SAFELIFE DEFENSE which defeats up to a .30-06 which is a couple calibers up from a .762

[@vicerichter1163]

30-06 is a necked up 308 kid. Tf u talking about

[@CadenCraven]

Look at his mouth bruh ☠️

[@KimMax-r6k]

Can you shoot a sniper

[@michaelspigner3878]

Do you play airsoft?

[@actslore]

Can it stop m855a1?

[@Coldworld_24]

What plate carrier is that?

[@bigpapijuiceman7106]

bro kinda look like soap

[@lowkeyhim556]

Is this guy a troll? Lol

[@sabazurabashvili3767]

I'd still recommend wearing halo suit

[@Greekmilsim]

Steel plates are terrible

[@McDuggets]

does plate carrier only have 1 plate on the front? No back plate?

[@Jozie-Jozie]

No it can have in front an back

[@egg6381]

Do NOT run steel

[@Doosespimp]

lol I got level 4 buddy

[@Thisistheunitedstatesdude]

Pls tell us how to use one

[@Chase7711]

Ace link armor makes good ceramic plates they have a poly ethylene back barrier for extra protection I have to of the ceramic level 4 plates and I love them

[@crazylilkid1]

You are so cooked