The engine and fuel companies are gonna kill me!!

In those days there are no bad engines, there are bad tuners...

[@denismlivic1211]

Excellent point about the fuel, a lot of people do not realise this! There really are huge differences between them, maybe the most in any RC racing package component

[@kostasmarougas3861]

Bruno hits the rev limiter🤣🤣🤣..great video!!!

[@antoniosousa_61]

Bruno, muito obrigado pelos bons conselhos. Top!

[@Slatanicmushroom]

Even though I'm not a nitro driver, this video was awesome Bruno. Very well explained and made! You should be the Hagberg of (1/10) offroad 😉

[@BrunoGomes666]

Really interesting to see this as there's currently a very bad trend over the internet that a one stage idle means the engine is well tuned, and many times that's not the case. This myth is more prominent among bashers, as usually seasoned racers know how to tune their engine properly and really don't care about a one stage idle. I know I don't... Finally someone debunking that one stage idle shitty myth. Thanks man.

[@invisiblespeedrc]

It's not a myth. A correctly tuned and well running engine won't have a noticeable 2 stage idle within the initial seconds of idle. The goal should be to eliminate the 2 stage idle, not have one. How big should the drop in RPM? After how many seconds? Just no. Always tune on the rich side, in good engines the tune will eliminate the double idle in the relevant working window, on worn out engines, less good engines there will be a slight double idle. I will fight you on this haha!

[@BrunoGomes666]

@@invisiblespeedrc you can fight all you want. I don't really care. I've seen and have engines with a two stage idle that if you tune for a single stage idle, the engine will simply not perform to its full potential. I don't tune an engine for a single or a two stage idle, I tune it in a way that it will provide the performance I want/need on the track. In some engines, tuning them right can provide a single stage idle, while in others, you get a two stage idle. Ppl focus too much on this shit, instead of listening and feeling on the track how the engine is reacting and tuning it to their needs. Of course I can only speak for myself and for the good results I always had tuning my engines this way (and by good results I mean my engines staying consistent in hour long mains both with high or low ambient temperatures and not shutting down). Maybe I'm just lucky. Or not...

[@invisiblespeedrc]

@@BrunoGomes666 which brand do you run?

[@BrunoGomes666]

@@invisiblespeedrc Speaking only about my engines, last season I used a Novarossi Rolling 7-port engine with the 9901 pipe and medium header. Glow plug used was the OS P4 (as it is more durable than Novarossi ones), with a 6 or 6.5mm restrictor (not really sure which) and nitrolux 25% fuel. Motor loved to run between 130 and 140ºC. Didn't shut down at all. Extremely reliable. My local track is Barcelos (where the next RCGP round will be held) and that downhill straightway really makes any engine scream. This year I'll be running an Ultimate M5S (OS based) with a 2141 pipe (basically an OS 2090) medium header, and this engine, probably, well tuned will have a single stage idle. They usually do as compression (and therefore temperatures) is usually lower. But again, I tune for performance. I don't really care if an engine will last forever. The engine has to be reliable and perform the way I need it to. The Novarossi still has lots of compression. I have more engines, but I don't think they will add anything else to the conversation.

[@simonlee4269]

@@invisiblespeedrc i questioned this 2 step idle on your video on carb tuning stating that i saw a previous video on the 2 step idle. but couldn't remember who done it. so i thought i must have miss heard. But obviously from this video i didn't. now im confused.com 2 pros giving 2 tuning tips..

[@brandonbentley5453]

Sticking with the same fuel back in the da was no problem. I ran Odonnell for 20 years. Amazing fuel. Then they went under and went to Bones Brew(really good, hard to get). VP is the only fuel readily available in the states that's consistent.

[@wannaknowbad]

COOL VIDEO!!! THANKS BRUNO!

[@vonholdinghausen6886]

Very interesting, THANKS

[@mrtgeary8268]

👍🏻 world champion at saying “shitty” most times in 5mins ... Jim Morrison of RC 😂🏆

[@aidanrc46]

Thanks Bruno

[@weaponofchoice8942]

Nice job thanks

[@RAINMAN-hb8qj]

Great advice but I use a hairdryer before I start my nitros it’s cheating but warms up quickly that’s if you have one to hand I’ve got a volt converter for real car so I can plug house hold plugs on the go just my way

[@craigjones2015]

I was always told av2 to 3 stage idle is not good. If it comes back to idle right away that's a perfect needle setting

[@atiprocharger]

Show you where the fuck i'am!!! lol classic

[@SEDARTA_RECORDS]

7:30 this is actually the mid range adjustment not being set correctly.

[@mdrc3288]

Fuel is certainly very important. The engine has different behavior and also power depending on the brand you are using. Fuel can be the reason also for overheating.

[@ryanrlp8385]

Do they use Klotz Oil or Motul?

[@superstock9261]

Is runner time still a good fuel? I used to use this about 12-15 years ago when I ran nitro on road and it was exceptional, is this still the case?

[@BrunoCoelhoRC]

Yes for sure still one of the best fuels

[@superstock9261]

@@BrunoCoelhoRC can you tell what are the top 5? Here in Australia they use to use vp fuels and nitro xand it was some of the worse fuels I've seen. Cars use to come into the pursrevving like crazy, they would fail to start when hot etc.

[@BrunoCoelhoRC]

Well in Australia I don't really know. But for sure in Europe I can tell you top 3 is SRC Fuel Energy Fuel Runner Time I think that VP Fuel is good too but we don't have it in Europe

[@redrocketracing7617]

🙌

[@rcthailandbasic9734]

🤟🤟🤟

[@Statek63]

What do you mean by "set your throttle on 0" ? I do not get it - a picture or a word of explanation would really help. Great video anyway 🙂

[@BrunoCoelhoRC]

Thanks. I mean make sure your servo is not pushing a bit the throttle so you have 0 throttle. Sometimes people have a little play like 1-2% and they can't adjust the idle because of it. Make sure that you servo is pushing back the throttle that's why it normally has a spring there.

[@Statek63]

@@BrunoCoelhoRC Thanks !

[@TheMiksilva]

ora ai está :) ate podes ter tudo topo de gama mas se n conheceres o que tens... :p

[@Imagineering100]

My kids don't want to hear foul language.

[@Imagineering100]

Yes true it is a model car tech talk

[@briancarroll6245]

👍🇮🇪

[@floridalife7877]

Baaa baaa baaaa baaaaa Hahaha

[@vaamorais]

So where the F*** are u?!

[@BrunoCoelhoRC]

Well I say it on the video. Sesimbra, Portugal .