The First Gen FORD FUSION Is The Best Used Car

IS the Ford Fusion the best used car ever? Follow along as I dive into why I think it is and some of the things you should look out for before you buy!
Be sure to like this video and subscribe to the channel if you want to see more great Automotive content.
OLDE CARR GUY MERCH
shop.spreadshirt.ca/oldecarra...
Check out my Instagram @oldecarrautoguy
or Facebook oldecarrautoguy
#oldecarrautoguy #oldecarrguy
Want more to entertain you? Check out this great Podcast I co-host:
www.GetOutNDrive.com
KZbin / @getoutndrive
Facebook- / get.out.n.drive.podcast
Instagram- / get_out_n_drive
Twitter- / getoutndrivepod
Found Wherever You Listen To Your Favorite Podcasts!
Want to send me cool stuff?
OCG - Olde Carr Guy
220 Route 170
Oak Bay, NB E3L-3X8
My Gear
GoPro Hero 6- amzn.to/3gL8YOE
Wired Mic- amzn.to/346FF43
Wireless Mic- amzn.to/3gMYcHJ
Mic wind sock- amzn.to/2WfWS6B
GoPro Mic adapter- amzn.to/3nkrEai
GoPro Case- amzn.to/37fh1ju

[@Thatmellofello]

I bought myself a 2008 Ford fusion SEL V6 with 190,000 miles for $500 and it was dirt cheap for one reason, code P0303 aka misfire on cylinder 3. I replaced all the spark plugs and coil packs and she now runs like a dream. Best $500 I ever spent.

[@f.joebidencommunistpartyof4156]

Congrats!

[@nascarsimracing1]

NICE!!!! I hope that car continues to serve u well! I have a 2008 Fusion SEL V6 with 172K miles and it still is serving me very well! I'm in love with this car and will buy another 2006-2009 fusion once this one rusts itself in half.

[@scrambler69-xk3kv]

When my Hyunsai Elantra showed a code for misfire on cylinder four it wasn't the plug or coil, it was low compression. You would never know anything was wrong were it not for the check engine light. 50,000 miles so Hyundai replaced the engine. Well short block they reused the head.

[@bobmoss4578]

Last fall I got a 2008 fusion Sel AWD V6 with 136000 kms on it

[@nascarsimracing1]

@@bobmoss4578 Very nice!!!!

[@jonathan6480]

I got a 2011 Fusion SE a week before March 2020. I've never had a serious issue with it. By paying for it in cash, I've been able to get rid of $50k in student loans.

[@crispybacon2588]

2011 naturally aspirated v4. 225k. No issues

[@kevmorris3000]

Agreed. I've owned a 2007 for 15 years and a 2011 for 10 years. Both have been outstanding with few problems.

[@MrPlaydohface]

Ive got an 06 ford fusion with the 2.3L 5 speed and shes pushing a quarter million miles. Im the 4th owner its been totaled twice and still gets almost 30 mpg lol ive had it 4 years and im just gonna keep fixing it because its just so reliable.

[@louvoodoo]

I have 2011 Ford Sport Sport with 298k and it is still running strong. That car has been extremely good to me.

[@bigspeedtv6698]

Good to know mine has 220k zero issues

[@JaPaNeSe_MxD_707]

Was there any major repairs needed?

[@louvoodoo]

@@JaPaNeSe_MxD_707 the only big ticket item that needed replaced was the fuel pump. It would have been an $1,100 job, but likely it was covered under the extended warranty. I have put all new, springs, shocks and struts on it as well, but that is to be expected once a car crosses 200k miles mark.

[@markspencer-ll3wh]

@@JaPaNeSe_MxD_707 the 3.5 v6 in the sport has internal water pump very expensive to replace

[@23billd]

I own a 2012 Fusion with the 2.5 engine and it has been the best car I've ever owned and I'm 73. It might end up being my final car. In 11 years I've replaced 2 tail lamps and that interior door handle and that's it!

[@riabenothmen9659]

I can buy it from you 😂 just kidding may god bless you

[@janamccarley2032]

I have a 2007 Ford Fusion SEL V6 with 344,000 miles. Other than regular maintenance, I have only replaced throttle body and water pump. Everything still works and runs and drives excellent.

[@jaimequintana6571]

Oh wow! 344k miles that's impressive, I have a 2006 with 240k miles and thought that motor was about to die down anytime soon, that gave me some hope on adding more miles... runs like a champ!!!

[@edwardgonzalez5178]

What kind of oil are you using?

[@janamccarley2032]

@@edwardgonzalez5178 Castrol 5w20 It is now about to hit 370,000, had to replace one wheel bearing since last time I posted. Still my daily driver and everything still works like it should.

[@SirStixxy]

I've had my '09 SEL v6 AWD for 9 years. I do all my own work on it. Just like the video said, I've replaced the outside rockers and the trans cooler lines. Also replaced gas tank, drive shaft and front control arms. Other than that, just basic maintenance. Best car I've had. 😊

[@Ccg9024]

I’ve had my 2012 SEL for four years now in the red candy tint metallic color. Got it when it had just over 98k miles. Today I’m approaching 163k and it’s still going great. Just couple weeks ago I had my transmission flushed for the second time of owning it. It’s a fully loaded one with factory nav, sunroof, the 12 speakers only system, the BLISS system etc. only thing missing is AWD. The first gen fusions,particularly the ‘1.5 gen” models from 2010-2012 still look great today. The style still holds up pretty well.

[@smileyk4129]

Would u recommend the 2012 today? Im looking to go get one? What should i know or look for? Thank you

[@o-98283]

@@smileyk4129 I bought a 2011 ford fusion se 2.5L 4 cylinder with 127k miles on it, now it has 152k miles on it. No major problem. My first year of ownership I put 22k miles on it. So far it’s been pretty solid. Just don’t forget to do maintenance. Just look for a good one and check all the fluids and take it for test drive. If you have any questions feel free to Ask.

[@funktron4]

The Ford AWD system of this era has issues----you're lucky not to have one. Now it's not that every single one is bad, but I looked into it---and it's a common issue that is very expensive to fix.

[@joeyjuandiaz6195]

I feel you just got a 2010 Ford fusions sel fully loaded aswell is a great car and reliable and for a 4 cylinder it moves

[@marioluigi6024]

I am looking at my neighbor's 2009 one owner 4cyl one with 150k miles for $500. It's just been sitting since his wife died. Video was definitely helpful for my decision. Thank you

[@erichartshorn949]

My gf and i have one of these for just 750 dollars. 262,000 miles when we got it. Its been over a year now and we have driven over 5k miles and heres list of maintenence we have done: changed tires, changed front rotors and breaks, changed spark plugs and coils, changed valve covor gasket, two tie rods, 4 ball joints. Sounds like a lot but we need a cheap reliable car and weve done this gradually over a year. Total spent on this car probably about 3-4k for a running car and a year of driving could be worse. Im pleased especially for a car that total to buy was 750. Hope it keeps running for me

[@inchalata]

Man! Can confirm! I have a 2012 SE with the 2.5 and it's been nothing but a sweet cruise. I bought it in 2013 and as I am typing this, it is sitting @ 197489 miles. No major repairs or complaints other than, as you said, the dang door handles, adding a bit better quality speakers, and changing the occasional light bulb. I am about to replace my valve cover gasket as the original is starting to show it's face. I found some oil on my coil packs. It's a natural occurrence and I can not complain! Working on this thing is easy. The space it offers is great. The ride is fantastic. It does have some umph when you give it the beans l -- over all it's a solid choice if you can find one.

[@smileyk4129]

I'm looking at a 2012 116.000 mile for 7000 what u think is worth getting. What u like and dislikes what should i look for

[@christiangriffith225]

I also had a 2012 Ford fusion SE and mine had a sunroof which was pretty cool; mine had high mileage when I bought it, and it did have a little bit trouble shifting And for some reason it overheated, but besides that it was pretty good!

[@natmatt]

I own a 2011 ford fusion, and it’s nice. It’s coming up on 200,000 miles with no major issues! It’s super rusted, but it runs like a dream. I have begun to save for a new car though 😂

[@OldeCarrGuy]

Grand Marquis, Crown Victoria or Town cars are nice!

[@BurningUp99]

Are they known for rusting a lot? I'm looking into buying a used 2010 my state has inspection though and rust is one of the things they like to look really hard at.

[@brandonamond3124]

Those are good cars they are built on a frame so as far as rust goes the crown Vic's and mercury grand marquis built with thicker metal so most of them hold up to rust very well.

[@theshield1613]

Newer cars are unreliable

[@OldeCarrGuy]

@@mellowoutman4516I don’t really know your market, but low mileage and excellent condition is going to come at a premium.

[@skipstover8867]

I have a 2010 Fusion with the Cool Fusion Package which are graphics. 3.0L I bought it in 2014 and It's been great. This morning it had a rough idle and a cylinder # 5 code. While checking it out I found a wire had been chewed by a squirrel. Fix it runs fine again.

[@Exterminator_PvP_YT]

I have a Ford Fusion 2011 SE, my dad gave it to me, it is the best car ever!! It is very comfortable and I feel safe on it. I do all the oil changes and everything it needs to be in perfect conditions! It has 113,000 miles.

[@melodyxiong8094]

I am thinking about buying a 2016 ford fusion. What do you think? Do you still have your ford fusion?

[@fos9698]

@@melodyxiong8094 Just my very uneducated opinion, but it seems the later model Fusions don't do as well. For some reason, 2009 - 2012 were the golden years for Fords. They were also built during a big economic downturn, so they seemed eager to build good, solid cars. Not going to lie, the later model Fusions look super cool, though.

[@alise1973]

I just bought a 2012 ford fusion sel with 101,000 but the dealer got it 6 months ago with 97,000 mi on it. I bought it after test driving it for $8,300. It's really nice to hear you say that this is a good car. I panicked after I bought it thinking I had made an impulsive decision. Lol.

[@donaldhalls2189]

In Australia we have had mazda clone ford's for some time very reliable, no so much rust, we don't use salt on roads, unless near the beach, our lazer were mazda 323, meteor, mazda 626,etc lasted well, all the best to yous and your loved ones

[@OldeCarrGuy]

Thanks Donald!

[@blackened872]

Bought a 2012 fusion brand new and I still have it. Over 200k miles and 2 minor accidents and it’s still going. I did have to replace the door handle myself a couple times. To be fair, I delivered pizza part time for a little bit so I was in and out of the car a lot more than your average driver.

[@Lookbutalsosee360]

I just obtained a 2006 sel v6 fusion, and I have replaced the battery and have some window issues, but overall it drives like a champ everything still works! And I’m just thrilled with it. And it’s got a new motor installed by Ford. Leather, heated everything, and new tires. Only complaint I can think of is that it’s front wheel drive is really difficult to control in snow or icy conditions I’m in Idaho so it’s kind of a thing! But over all I love ❤it!

[@alexgreen4361]

My first car was an 09 Buick lacrosse about a year ago, but after 3 weeks it got totaled in an accident. Got myself a 10 fusion sel with just about all the bells and whistles for its trim, and I absolutely love this car. Haven’t done any maintenance other than oil changes so far, I get pretty good gas mileage, and you can’t not enjoy the power of the 3.0 V6 in these things. Couple that with all the space inside, and I really don’t think there’s a better first car than the first gen fusions

[@chrisguthrie538]

I had a 2012 fusion 2.5. Fantastic daily commute car. Not fast, or too quick but got 33mpg. Gave it to my girlfriend at the time. Great car.

[@melodyxiong8094]

Does your girlfriend still like the ford fusion. I’m a little hesitant because I’ve had a ford fusion

[@melodyxiong8094]

I’ve never had a ford fusion

[@TheBlazinman]

Overall these years are great in my opinion. I own a 2008 sel v6. The biggest issue i ran into was the ambient temp sensor for the ac is behind the dash! what a BIG job to take that dash down just to replace a 30$ part.

[@louis7469]

I bought a used 2012 loaded SEL. Sony stereo, heated leather seats, sunroof, V6, on and on. Needed two tires replaced. Needed rear brakes. Repaired some rust on rear rockers. All done. It has a lot

[@OldeCarrGuy]

They really are great cars!

[@jstorrer1]

I had a 2011 2.5 SE. bought it at 25k miles. Lasted till 266k before daughter wrecked it, never in the shop, ever, best car ever. I bought a 2012, bought my daughter another 2011, both going strong!

[@candice6259]

Just bought a 2012 2.5 se for my first car hope it treats me as well as yours have

[@philipramsden4975]

Just got my daughter a 2011 2.5L SE w/ 137k miles. Solid car and nice set of features. Rockers have some rust bubbling, but all in all, very nice starter car in my opinion

[@BurningUp99]

I'm looking into a 2010 ya i'm hoping rust isn't an issue especially since my state has inspections yearly.

[@fos9698]

Yep to that rust. There are several Ford Fusions in my town, and we're all rusting down there.

[@Northeast_progeny]

One of the reasons I was excited to get my 2017 SE is because it had the 2.5. I did my research and told my dealer I go to for vehicles that it would be perfect if he could find a 2.5, worst case I would be fine with the 2l ecoboost but luckily he found one at 63K miles. I want simplicity in my daily driver so a decent NA 4 cylinder is great and the 2.5 fits perfectly. Nothing but oil changes and its at 90K. Great engines and simple too. I hate how so many engines are getting turbos plastered onto them, just give me a NA simple efficient engine damnit lol.

[@EddietheHouserocker]

1st & 2nd Gen Focus is kind of the same M.O, Many parts shared with Mazda including it's engine. With basic maintenance will run virtually forever! I have an 07 with 234K miles still going strong. It's a smaller car but for easy/cheap to fix A to B car it's a good one as well!

[@teejaybee8222]

I got my 2010 Ford Fusion 12 years ago. Still going strong at 245K miles! Saved soooo much money over the years.

[@bigspeedtv6698]

I got a 2010 ford fusion sport and a 2011 ford fusion sel, both red and zero issues with them. 10/10 recommend love them

[@timsharkey1993]

Just added this car to my list of ones to look for

[@Bwhizz-un1jh]

The fuel door is the seal on capless gas models. clean around the fuel door good or replace the seal will more than likely & cheaply fix the check motor light

[@sahoyte]

I'm still driving my 2010 Fusion SEL. Bought new in January 2010. 69,000 miles now. Main problem I found was if I left my IPOD plugged in to aux inside the console the battery would drain and go dead. The 12v outlet on the console is not powered unless the car is running or in aux mode. The USB outlet is always powered. Four batteries in five years before I figured it out. And yes, I also had to replace the lever on the driver door. Inexpensive replacement part from Amazon and a bit of labor fixed it easily and cheaply. West Coast car so no salted roads or rust. I wanted it to be my last new car and so far it still goes back and forth.

[@WilliamCaraballo-op9kp]

This video is so true I bought a 2007 fusion se 2.3l in the middle of pandemic from a neighbor for $2,500 with only 76,000 miles!!!! It needed a lot of stuff , it was running in super rough condition but with KZbin to help me it was easy. I drove that thing everywhere for 3 years it now has 123,000 miles and is my 18 year old sons car now bc I got a 2017 f-150. Hands down that fusion was the best car I’ve ever owned I’m always looking for cheap ones on Facebook for a backup emergency car just in case. But I really want it bc those cars run great.

[@Zdidge]

Great stuff. Thank you!

[@kiethj7]

I have had my 2010 Ford fusion 6 speed since 2016. I have drive it across the country 4 different times and it's my everyday driver. The most I have had to spend on it was for the brakes. I have no complaints at all and love the car

[@Str8sixfan]

That era of Mazda6 was a sharp car too. I always thought these were cool cars, brother-in-law has a Sport model and it was sharp!

[@OldeCarrGuy]

We’ve only ever had a couple Sport models, but yes, nice cars!

[@stevenferris1714]

We love our Mazda 6 we bought from Olde Carr Auto. Only fly in the ointment is the push button start.

[@joeyjuandiaz6195]

I just bought one 2010 Ford fusion sel black leather seats color navigation good Sony system with 143k miles runes great good lookin car

[@f.joebidencommunistpartyof4156]

Thanks for this video. I really appreciate it. Will be looking to buy one of these 2006-2012 models

[@OldeCarrGuy]

Glad I could help

[@jessehalliday9239]

Love my 3.5L. Great car!

[@drakecarter1780]

I had the same problem with my driver door. I just pull the handle gently and use my elbow to actually open the door.

[@rickinnepa9008]

Have a 2011 Fusion S. Runs great. Had to replace the drivers side door release as well I have replaced the AC blower motor twice. Otherwise it's been awesome.

[@danjenkins8981]

I’ve had 2 of them. Both 4 banger with the 5 speed. Great cars.

[@thetruthisoutthereyt]

My Colorado 2010 3.0 Sel awd is still in excellent condition. I’ve never done better than 24 mph

[@FlyingPotato69]

Currently have a 2010 Fusion Sport. Purchased in 2018 with 82k miles on it and now at 185k miles in 2024. Only major repair was the water pump back in 2019 after it got past 100k miles. Currently have a Tuning By James 93 octane tune on the car and it definitely opens up the potential of the engine more and it has been very fun to drive as my daily.

[@mooredelira]

the problem with the drivers side door handle is if you lock thr door, after opening it, and turn off the engine ar the same time, the plastic lock mechanism in thr drivers side door handle will break. I've broken them twice, now I'm a lot more patient about locking the door after opening it from the inside and turning off the engine in my 2010 Ford Fusion

[@ATTICUSMARCIANO]

Awesome video! I got a good fusion last year 3.0 v6 with 160km on it! Guy only wanted $5800CAD and during that time the used car market was so hot it was a bargain!

[@shadowbanned3716]

Ive got a ford fusion. I would say thats technically a second gen. They made changes to the aesthetics as will as the powertrain in 2010. It got a 3.0v6 duratec that started implementing cam inertial driven VVT and flex fuel for E85. there was some changes to the tranamission as well with the addition iof a dipstick. Slight HP increase.

[@JO-ku1uc]

Hi, just started watching the channel. I used to own a 09 Milan with the 2.3 L and Mazda based tranny. I traded it at 275 K. It was a fantastic car and is still appealing to the eye. My current vehicle is a 07 Marquis GS with 87 K. It has also been a fantastic vehicle.

[@OldeCarrGuy]

From good to better. Thanks for watching.

[@mattmaverick703]

Those are also both great cars made by Ford. Yes the Mazda Powertrains were also reliable as my Dad's 2007 Ranger had that same engine your Milan had

[@JO-ku1uc]

Thanks. I agree. I've been looking at the newer Fusions to perhaps purchase in the future. They continue to have a Mazda derived 4 cyl based on the 2.3l, but the auto transmissions are no longer Mazda based and I heard they are plagued with problems unfortunately.

[@mattmaverick703]

@@JO-ku1uc yes 2013 to 2016 had issues by 2017 and newer they were alot better. So if looking I'd look for a 2018 that was probably the best year for the 2nd gen Fusion

[@JO-ku1uc]

Thanks

[@tommotts4219]

Put the emergency funnel in the fuel fill inlet and spray some WD-40 around the outside. Then work the funnel in and out opening and closing the flap. Then replace the purge valve. It’s only like 20 bucks.

[@AZLANKHAN003]

I own a 2010 se... original owner. I had to only replace throttle body, transmission cooler lines, 2 door handles and just your regular maintenance. Some things are about to go like the rear antenna but nothing really expensive. Great vehicle.

[@steven-rb2ef]

these were really solid vehicles. my mom gave me her '10 SEL 2.5L in sep 2018 with 66k miles. had it until april 2022 and someone ran a red light and hit me, insurance totaled it. and gave me $6k for it. throttle body went out at 75k miles and was replaced under a extended recall, electric power steering went out at 114k miles my local Ford dealer fixed it for free. transmission was messed up because the fluid was never changed but the car never left me stranded. 3 years before the car was totaled someone brake checked me and i rear ended someone at 40mph, my fusion only had a cracked headlight and the other drivers bumper was caved in, even though Fusions were made in Mexico these cars are tanks!

[@BrucePirkl-rj9lh]

The door handles break because the lock button is attached to the door handle and if you accidentally hit the lock button either on the door trim panel switch or the key fob when your opening the door then plastic lower handle part will break.

[@elenamanley5509]

Love my 2007 SEL V6. I baby it. Experiencing some oil leaks but that will be addressed next time I take it in. I refuse to get a new car with all the screens and gadgets that will cost a ton to repair in a short amount of time. I do miss my radio display though. Stopped working years ago along with the cd changer.

[@ericmoreno8907]

I had a 2012 2.5 got it with 30,000 miles drove it supper bad ,did do simple maintenance on it and when I sold it it had 150,00 miles on it all city driven. I loved the car.get you one.

[@melodyxiong8094]

I’m thinking about buying a 2012 ford fusion. For $8,000. But I have never had a ford just a little hesitant about it.

[@jetg2059]

Just purchased a 2012 fusion 1k on it AWD V6 technology package moon and toon great car still running great

[@melodyxiong8094]

Is the ford fusion still trucking?

[@jetg2059]

@@melodyxiong8094 still running great

[@jamesgang6206]

I'm on my 2nd Fusion. The 1st was a 2006 SEL V6. Grey with black cloth seats. Power windows. It had 81k on it when I bought it. Great car.I wound up trading it after 9 years & 140k + miles with the rockers rusted out, and underneath scaly and 1 hole patched underneath the passenger seat. I live in the rust belt. So I traded it for a 2012 SEL V6 diamond white, with leather heated seats, etc.. A Florida car and clean underneath as when new. Looks just like this one in this video. It had 71K when I bought it. These cars are really pretty reliable. And comfortable. Ford made a mistake ceasing production. One of the best cars they ever made. The 3.0 liter V6 is really the same engine they put in the Jaguars when Ford owned them. Made right here @ Cleveland engine Plant 2.

[@dragongnnr]

Bought a 2012 Fusion 2.5l it was a rental car from Enterprise, Hertz I don't remember. It had over 96,000 miles, it currently has 237,000+ miles, other than normal maintenance stuff it's still going strong. My wife drives it to work, and around town to save miles on her new car. It has been very dependable, not a bad thing to say about it.

[@moose6790]

I love my 2010 Fusion SE!

[@mikea4150]

I bought my 08 SEL , 6 cyl new in 08. I'm still driving it with 147,000 miles. 2 days ago I noticed oil dripping which turned out to be the pressure sensor in the power steering pump. it was a $35 easy fix. Airbag recall was repaired last year along with Anti lock brake recall . Beside normal maintenance like brakes and tires Ive had nothing go wrong with this car . My car also shines like the day it was new .

[@OldeCarrGuy]

Good stuff

[@Funcherie]

I had to replace the transmission cooler lines on my 2011 SE. I've had her for going on 10 years.

[@hbgriss]

09 2.3sel here. Kids car. He thrashes it but drives nice and calm. Dealing w a check engine at 82k but its think its more than a small vaccum leak. I wish he loved it like i do 🥴

[@mgg5050]

I bought a 2011 with over 247,000 miles on it with the 4 cylinder in it for a song.... It was to be my daughter's first car. Had it for only a few weeks when some teen on a phone did not notice that we were all stoped and totaled it.... With the money from that I Immediately and with no hesitation bought the exact same car. This car is a true hidden gem!!!!

[@robertrivera5866]

I have a 2012 Ford Fusion SEL. It is equipped with the Microsoft Sync, navigation system and a cd-playee which has the larger screen. For those who don't know, this particular stereo has a built jukebox that can store up to 2650 songs or tracks. If you have one of these systems, it is very easy to upload your cd's. 1. Put in your favorite cd into cd player. 2. Click on the 'record' icon on the screen (located on the bottom right on the screen 3. The system will automatically upload your songs/tracks. 4. Once the cd has been uploaded, remove the cd from the stereo.

[@OldeCarrGuy]

Great tip!

[@youngsquirrel211]

I have a 2011 se its been a tank got it when it had 70k miles its got 120k its still going strong only few oil changes and new tires

[@justsimplytrash6703]

im 18 with my first car being a 2010 ford fusion se honestly love it got it at 17 best car in the market rn

[@jrevolution4583]

I love the 2ed Gen fusion they made the front so much better looking .. not good in the snow though surprisingly

[@AmericaBumpertoBumper]

Good review.

[@OldeCarrGuy]

Thanks bud

[@awesomefish100]

I have a fairly low mileage 09 starting to show rust on the rockers. Anyone have experience replacing these rockers? Where did you get the panel and how did you secure it to the car. Not a lot of info online for how many of these cars I see with rusty rockers.

[@mjc-thatsme5669]

2012 se has been great, 250k miles and still going strong!

[@2steaksandwiches665]

I always chose these as rentals when they were being offered. Basic no nonsense car.

[@cdb989]

The car is a hidden gem Low maintenance nice ride stylish all at a low cost.

[@BlindMansRevenge2002]

That check filler door message can also occur if the actual quick fill gas cap gets fouled with debris and other dirt. It needs to be serviced periodically. Open the door, inspect use compressed air to blow out any large pieces of debris and some brake cleaner on a rag for, the outside of the quick fill. After that, get the emergency roadside funnel and some WD-40. Spray down the hole where the filler nozzle goes in and then repeatedly insert an extract the emergency road funnel. Repeat once or twice and then reset the message. After one or two drive cycles it should either stay off or come back. if debris keeps that quick fill cap from completely shutting, when you extract a filler nozzle, the car thinks that the filler door is open.

[@OldeCarrGuy]

Good tips!

[@BlindMansRevenge2002]

Thanks, I own a 2012 SEL V6 and do this about every 10,000 miles

[@glennnickerson8438]

Thanks Jason for the input... I will keep it in mind for the wife's next car. I'll stick with my 21 yr old Grand Marquis (my vote for best bang for the buck)! 😎

[@OldeCarrGuy]

Haha! For sure!

[@robertrivera5866]

I have a 2012 Ford Fusion SEL, and it is a great car.

[@lesaint-louiscoiffure2009]

Miss the option that was on those fusion generations of the front passenger seat foldable

[@piecetrain9767]

I have a 2008 SEL (V6) with about 260k miles. The rear main seal is leaking and suspension could use a replacement. But it’s a kid car now. Door handles are a weakness. Regular maintenance of course which is fairly easy except spark plugs on the back side are a pain. but I’m trying to think of anything major needed to be done. Maybe a water pump.

[@3712bigboy]

I have a 2012 sel 3.0 with 88k had to replace the water pump literally 20 minute job my wife drives a 2020 titanium great cars

[@BP-1972]

Bought a 2011 for my son. Had it a year, has 80,000 miles now. Front end was making all sorts of creeks, pops, front tires were wearing on the edges. Took it to my mechanic and he found the tie rods, ball joints, all had to be replaced. Then add the rear brakes and calipers, and we have a $1800 bill. Never had to do this to a car before with this low of miles.

[@OldeCarrGuy]

Neglect of regular maintenance items is not the fault of the car!

[@shadowbanned3716]

Yep. Ive got a 2011 and just had to do that. Did the job with my dad whos a mechanic. The suspension on this car wears out way too fast. I thought that was strange too. It has front and rear lower control arms so TWO ball joints on the knuckle. Never had ball joints that were so hard to press out. Literally bent a ball joint press and had to cut the control arm off at the joint to get a bigger tool and more leverage on it.

[@tedschmitt178]

I always wanted one one of these with a 5-speed. It’s a Mazda6 under the skin.

[@jackwakefield1979]

Got a 2010 Sport edition. 3.5 Front wheel drive. No problems at all so far

[@ghostdog210tx4]

I got a 2011 mercury milan premiere edition (fwd no idea if milan made awd ones) as my first car during highschool. $14k at around 60k miles at the time, still own it sitting at 160k miles. Lots of fun times, lots of not so fun times lol Some of the biggest issues I ever had was 1. A half done tune up job meaning midas didn't find the hidden steel bracket connecting the intake manifold to the firewall (thanks for taking my $300 midas) so I had my buddies dad help me with that big ups to him 2. The power steering recall, I found out mine was computerized I guess and was lucky my buddy found out ford had a recall on it that I never got from the dealership amd thankfully they honored it, would've been a $3k job atleast from what the dealer told me 3. Worn out cv axle on my driver side mix of abuse and wear an tear I'm not going to lie lol 4. This was the gasket for the oil pan. Me an my buddies didn't want to snap any of the bolts under to free the exhaust to take out the oil pan itself so we just cut the pipe instead to save us time plus we get to hear my car kinda clapped out so it was a win win in my eyes lol And 5. The a/c is weak, no idea how to go about that and way to lazy to take the dash apart to take a look an whatnot so any ideas from those who sufferered the same as i any help/info would be appreciated! (It still works but not as strong and my center right shutter is hardly blowing air) Are there better first cars out there? Sure this one definitely gave me a long rolling headache but honestly I kinda find it hard to want to get rid of it, and now I'm saving for hopefully a 2011 5.0 mustang #thankyoufordmayihaveanother 😂

[@OldeCarrGuy]

Check your cabin air filter as it may be plugged restricting flow. Sounds like you love your car!

[@joelarmenta5616]

Bought a 2011 fusion in 2022. Ran great with no issues. February 2023 the power steering stopped working and it might cost me upwards of $2,000. Engine has no issues. A car built in 2011 with 60K miles and finally the power steering stops working. I’d say that’s not too bad.

[@OldeCarrGuy]

Thanks for sharing

[@noahanderson7098]

I would look into if your problem with power steering is covered under the active recall

[@fos9698]

I had to get my power steering replaced as well. But it didn't cost $2000. Of course, that was prior to inflation. Is this a dealership estimate? If so, try a good repair shop for a different quote. Could be a lot cheaper.

[@joelarmenta5616]

@@fos9698 I did get it replaced at the dealership. one week later the power steering stopped working again. The dealership told me that the part has a 2 year warranty and replaced it again at no cost.

[@PaNdAcCoRd]

I had the 2012 sport. Loved the car. Only issue I had was with the ac, I’m sure most of yous know aboutnit

[@Danno419]

Bought a 2012 fusion SEL V6 with 39k. Im now at 117k and the only issue i had was the water pump. Not that it failed but was leaking around the pulley. Hands down the easiest water pump change. Drive 80 miles a day. They are good cars.

[@KM3W]

Interesting...Yesterday, Oct 21, 2023......I just bought a 2009 Fusion with 58,000 miles for my wife. Its a beautful car....I wish it had the Sync for her phone but it doesn't. Planning on putting a JBL or Kenwood touch screen radio with XM and back up camera in it this week. Oh, and Plus remote start. It seems to be a decent car.

[@OldeCarrGuy]

You won’t be disappointed!

[@shannonwitter7504]

Forgot 1 thing bolt on pulley for waterpump breaks off

[@SteelRhinoXpress]

The only gripe i had with the 1st gen fusions were they made the interior cheap. The Inside door handles would break due to them being made from plastic. The fake sticker chrome they put around the gear selecter would start to fray and the grab handles would start to sag on their own. But the powertrain was oretty reliable. now the 2nd gen fusions interior were made much better, it just has better quality all the way around, but they suffer one huge issue and thats the cooliant instrusion issue on the 1.5, 1.6 and 2.0L ecoboost engines. From 2012 sept to april of 2019 models. But if you got the naturally asperated 2.5L engine you were good which is what i have in my 2018 fusion.

[@lt1montess]

Changing the trans fluid every 30k is a must.

[@MathiasJarlson]

My wife owned a 2011 fusion 2.5 (factory forged engine) for 10 years. We sold it to my sister who’s still driving it! 140k miles, no major repairs EVER

[@dellagreen9076]

My 2011 Ford fusion power steering when out on me with,167.000 miles on it. Still have it. But planning on getting rid of it. Cause am looking for another car. I'm not putting not one more dime in that car. It was very dependable up to about 2 mo's ago.

[@leeknowoutsold]

my 2012 ford fusion is at 240k miles right now and still going strong

[@melodyxiong8094]

Is your ford fusion still running good?

[@leeknowoutsold]

@@melodyxiong8094 yup! i had to replace the serpentine belt but thats it

[@bradleymeyer9775]

My cousin has a 2006 Fusion, it’s a nice car. I like the body style, they seem nice. If I didn’t have my Camry, and needs a affordable, decently reliable midsize car, i would consider a 2006-2012 Ford Fusion.

[@OldeCarrGuy]

And that’s exactly what they are. An all round, good affordable used car.

[@bradleymeyer9775]

@@OldeCarrGuy The first generation Ford Fusion, a GM car with the 3800 V6, Toyota Camry, Honda Accord, Toyota Corolla, or a Honda Civic I think are the best choices for used first cars, that have decent reliability.

[@mattmaverick703]

Yes the 1st gen Fusions 2006-2012 honestly weren't bad cars! Basically Mazdas. The 2nd gen 2013-2020 Fusions were supposedly more reliable and more related to the Taurus but you can still get one with the Mazda engine in which to the surprise is the base S model.

[@brandonamond3124]

@@mattmaverick703 Ford lied second gen fusions are junk

[@mattmaverick703]

@@brandonamond3124 yeah first few years 2013-2016 might've been the worst for the 2nd gen Fusion models but by 2017 -2020 they were better I heard!

[@omarbojorquez4875]

Impalas are reliable as well put 100k on my 2008 with no problems till I sold it... right now I have a 2010 Ford focus with 80k bought it for 2k hope Ford doesn't disappoint me

[@OldeCarrGuy]

I personally wouldn’t put an impala in the same category as a Fusion. But the first gen focus were tanks. You should do ok at that price!

[@BurningUp99]

I had a 2007 Focus it was ok but once they're about 10 years old w/ a lot of miles on them they start having issues. You should be ok though since it has such low miles. Ford and GM both have bad ideas for the body styles they give their cars. Always a weird back or too boxy or something. The 2010 Fusion is one exception I feel it looks about just right. The 2007 era Focus wasn't bad either especially the models that had the spoiler on it which is what I had. .

[@kingerikthegreatest.ofall.7860]

Wish I lived closer, I’d buy the fusion.

[@OldeCarrGuy]

And I’d happily sell you one!

[@kingerikthegreatest.ofall.7860]

@@OldeCarrGuy could you drive it to Oregon for me? Lol.

[@slipperyblueclay2521]

Just subscribed to your channel . Looking forward a reliable car to replace a rusting 2006 Honda Civic. Living in Southeastern Virginia, I am now junking my 2nd vehicle due to corrosion. I will not buy a car again with a history north of Maryland. I was looking at a 2nd generation Fusion, but the 1st generation looks better mechanically. You are among 3 KZbinrs- the Car Wizard and the Ford Boss who endorse this car. I’m sold!!

[@OldeCarrGuy]

Happy to help!

[@slipperyblueclay2521]

I was looking at a 2007 Fusion with a 3.0 V6 engine for sale with 42K miles. Car Edge says it’s been on the dealer’s lot for almost 2 years. I wonder why it hasn’t moved. Maybe the car has issues?? Overpriced at $9700.

[@OldeCarrGuy]

Definitely on the high side price wise! Reason for it being there for so long could be many reasons. Not all necessarily bad. Someone’s wife or family member may have been driving it, may have been a courtesy vehicle or loaner or it simply could be the price! Never hurts to ask!

[@slipperyblueclay2521]

@@OldeCarrGuy As a car dealer, what’s a fair price for a car in very good shape. I understand you’re in Nova Scotia. Ballpark figure??

[@OldeCarrGuy]

@@slipperyblueclay2521in in New Brunswick actually, but one thing to keep in mind is that km’s and condition is everything and that’s likely what they’re banking on. I would go see the car, make sure there are no surprises and start low balling, but know your limits. In my experience, this should be a $7-7500 car if it’s perfect.

[@matthewmoore661]

I want 1!

[@KnightIndustries572]

ooooooh Chev Cruze is a bit of red siren warning car, stay away IMO!! In Australia sold as the Holden Cruze, many folk were absolutely burned by the poor quality, reliability and expensive repairs, it broke the hearts of many young female first car buyers, but the Mazda 6 based Ford Fusion is definitely a good choice. BTW, love the channel and name!, i'm 49, been in the car industry 28 years, consider myself a bit of an Olde Carr Guy!

[@OldeCarrGuy]

Welcome to the Olde Carr Guy club! lol

[@KnightIndustries572]

@@OldeCarrGuy happy to be aboard!👍

[@davidfromsouthpark9023]

I'm going to get rid of my Chevy Cruze 2011 LT. I got from a family member and at first it drove good but over the past year. Every 3 months I had to replace something and now im just tired of it lol. I'm looking at a Toyota Corolla 2012 or Ford Fusion 2010. Wish me luck 😅

[@beverlyhalcomb9087]

I’ve got a 07 3.0 awd se

[@cskye6529]

Do those have timing chains (and covers)? I have just discovered that the timing cover leak is more of a pain than changing a timing belt.

[@OldeCarrGuy]

Timing chain. Definitely a pain. best of luck.

[@applefordguy76]

273,000 on my 2011 with a 2.5. Original motor and trans. I've done a rack and all 4 lower control arms. Besides routine, that's all I've had to do it. Unfortunately, the rear section of the rockers are getting crusty.

[@applefordguy76]

Mine was packaged as the "Moon and Tune package". SEL Blue Flame, black leather, ATC, and moonroof.