The hull cleaning process & the most modern machinery and technology help clean the hull effectively

[@r.awilliams9815]

What the video didn't mention is how astonishingly bad that job stinks. You get a ship into dry dock, it sits out of water in the sun and all those barnacles and other critters on the hull die and begin decomposing, and then you come along and start scraping the mess off...it's a stench you'll never forget.

[@forward_ever_ever2595]

Full respect for those doing that....thats a colossal amount of work

[@NS-ex6cm]

Colossal, not collasal.

[@forward_ever_ever2595]

@@NS-ex6cm thanks mate

[@cameron3991]

Not when you have 2 or 3 crews in the water with 3 divers per crew and 1 safety per diver. They do a of of other maintenance while it’s docked like HVAC / Plumbing / Electrical. They usually dock cruise ships that are over 200ft. Once for 6 months every 4 to 5 years.

[@wallerstc]

​@@forward_ever_ever2595dude, not mate

[@robertlevine2152]

It is important to note that many ports no longer allow in water cleaning of hulls. There are concerns of the release of invasive species. There are also concerns that during the in-water cleaning of hulls biocides contained in antifouling paints will be deposited in local waters.

[@iuliandragomir1]

Is exactly what I wanted to say

[@jasonantigua6825]

Makes sense! Thanks for the information

[@albertoghirlinzoni6631]

Buon Abbigliamento wè

[@dongningprc]

Talking about "the release of invasive species", I doubt by not allowing in water cleaning of hulls, invasive species will not move by themselves into the water near the ports. Are there any scientific evidence that in water cleaning is helping them migrating?

[@robertlevine2152]

@@dongningprc I have, since retirement, been following this topic from the periphery. I have not been active in discussions with people from paint manufacturers, diver companies and State environmental agencies. In the assessment of actual harm it is often a "shoot first, ask questions later " mentality. It becomes easier to seek an alternative solution, than to spend the time and effort to disprove the hypothesis that harm is being done. Self-publishing copolyermer paints and other ablative paints provided a solution for the issue of in-water cleaning 15 years ago. I can't tell you what alternatives are being used today. Bob

[@PeterNebelung]

Good trick to remove and replace the bow thruster in the water. Nice rigging job.

[@BackyardBeeKeepingNuevo]

I now know what it will take to clean a ship’s hull if I ever end up owning a ship.

[@DanBurgaud]

4:16 I LIKE THIS! NICE!

[@charlesspringer4709]

Nice work. Feed Wikepedia to a computer voice and put together other people's clips to sort of match. It works.

[@X-Machines]

Thanks so much

[@billwalker790]

Interesting, have they gone to Teflon coating or can it be done?

[@barryrahn5957]

Very satisfying watching all that crud come flying off.

[@hoof2001]

2:40 is not a propellor: it’s one of the ship’s thruster units

[@TheRoostersGarage]

And I don't think it was removed for cleaning, that looked like a failed unit being replaced

[@gerardboorsma3418]

Bow thruster

[@Woody615]

@@TheRoostersGarage I was thinking to save time, they were removing the entire unit and replacing it with a different one. Then they take the old one and refurbish and renovate it and install it on the next ship.

[@TheRoostersGarage]

@@Woody615 That would be a good option! It's not like any of this stuff is cheap, so I'm sure a lot of the components get rebuilt many times.

[@kevinBennet]

Comes right off!

[@Nusrat_2021]

Ship cleaning! Looks satisfying .....

[@gvanys]

I would like to know the cost for this service and how long it takes.

[@a-fl-man640]

nice video, music wasn't overbearing and didn't interfere with the narration, good job. subscribed

[@mojoden]

Are you deaf?????

[@capnchip]

Pretty interesting. Too bad thee camera is switched around so much it is almost impossible to actually see what is taking place.

[@vientran3861]

Thanks for your video and people to maintain the ships

[@X-Machines]

Cảm ơn bạn đã để lại bình luận

[@radoanazad4535]

Alhamdulillah Thanks for you your all video very nice I like you I love you

[@alexgomes8351]

Great video brother. I just loved it!

[@StringTone-t6v]

Lha yp loe keta kete iso ponter ning ameroca iyo memang koe pinter.thankyoi very much

[@prateekgemawat8017]

Very nice, concise and informative video. Great work 👍

[@BreadOnDeckk]

The vertidrive is such a good boy 🥺

[@rickherman4539]

good video . I liked it

[@aquious953]

The best method is Lazer blasting. It is amazing.

[@MrCarlosMRLima]

Quem apresenta este tipo de vídeos, como se tratasse de algo extraordinário, até me dá vontade de rir, porque quando há bastante mais de quarenta anos entrei para os Estaleiros Navais da Setenave em Setúbal - Portugal, já todo este tipo de tecnologia para reparação e manutenção de navios era usada, incluindo a utilização de "dock arms" para permitir um fácil e rápido acesso a qualquer parte do casco do navio!!!

[@fredgervinm.p.3315]

I have cleaned my share of hulls and painted them with TBTF paint...

[@deejaytrizay]

I hear this same voice in a LOT of videos. It, ofcourse, sounds synthetic, but...where do ppl get this voice from?

[@X-Machines]

Thanks for your valuable comment. X-Machines is trying every day to create interesting and useful videos for viewers. Recently X-Machines got new narrators. Could you take a moment to watch these videos and give us your opinion on these narrators kzbin.info/www/bejne/gKiYkn6wiql1h68 kzbin.info/www/bejne/nnSnqJmMe61lbNE

[@AlexanderVadura]

In wechen Abständen muss das gemacht werden?

[@edgarcruzsr9695]

love this stuff!

[@X-Machines]

Great

[@Broody-cq2yl]

Bunch of barnacles must be waiting right out side the maintenance yard for fresh surface😂

[@davis7099]

Music is truly strange, tuneless. Ship cleaning is excellent

[@BeeRich33]

That's not a propellor. It's a bow thruster.

[@davidbwa]

The device being used to create that thrust is literally a propeller. It wasn't an airplane either but many of those have propellers as well. From the internet - "What does bow thruster do? In simplest terms, thrusters are designed with propellers facing in a sideways direction so when they are turned on, they push the bow or stern of a boat sideways through the water, in either direction"

[@BeeRich33]

@@davidbwa Not around boats much I see. Take your grade school lecture elsewhere, kid.

[@paulreilly3904]

Looks like a duck, walks like a duck.... 😁

[@buddtwin2]

I mean he also said seaweed is going to attack the hull lol so I’m not surprised by the inaccurate description

[@06blackflhxi]

but the bow thruster has a propeller

[@paulcheney3636]

I've lost count of the amount of hours I have spent blasting off old paint barnacles etc. The blasting gun was powered by a volvo truck engine and the power is incredible. The noise is deafening and even with eye protection I've had to go to hospital maybe 8 times to have a foreign body taken out. The paint below the waterline is very poisonous and as it's washed off there's a paint coloured mist in the air. I've had shadows on my lungs twice and as soon as doctors see you've worked with marine paint they pay attention. Your health is precious and no amount of money is worth it

[@AndyHayes1]

Wow that first ship look long due for a cleaning. Definitely see how that would burn more fuel

[@marcobobson5972]

How much does this job cost? Clean and new paint.

[@tbusman1]

What shipyard was this filmed at?

[@corinnehorvath2519]

Pourquoi ils ne mettent pas de la graisse à fort pouvoir graissant pour éviter que les balanes s'accrochent sur la coque ?

[@cohall46]

Very interesting.

[@X-Machines]

Glad to hear that.

[@sunitadwarka347]

Each problem has different solutions. Another system is engineer must make heating systems of propelar, must discontinue wiring from inside use rubber where ever needed and heat it . All dust will seprate. Second system is must use hot water drops by drop water system connection to pass on propeller. Must experiment which method is best. While making machenical limbs for ships, we must make arrangements for cleaning. Like we can make mechanical limbs with hot water pipe material and we pass hot water time to time inside hot water pipe, so that nothing will get stuck to it. Jay shree ram. Shipping industry will completely change in future. Not the original structure but problems will be solved. Not returning from sea bring tears in eyes of family members. Jay shree ram.

[@jeremiahmendez3318]

I hope these guys are paid well

[@arkel312]

1991 rok stocznia Polska Szczecin Gryfia. Pozdrawiam wszystkich z doku nr 5. To były czasy...

[@markpinther9296]

Music sounds like a symphony of dead animals.

[@sunitadwarka347]

My another suggestion is, Make holes in the propeller fan arms. Take longer screw with rubber vayser . Cut the rubber sheets as per as size of propeller fan arms for both the sides ... or make cover with rubber sheets to wing of propeller. With screws you fix rubber sheets use rubber vayser to tighten it, After every fifteen days, you change the rubber sheets by opening screws. It will be very easy work. You keep it for drying all dust will seprate automatically. Till hot water system is not coming use this system. Screws will propeller fan arms rubber. Jay shree ram.

[@glennsoucy4359]

Idiotic

[@TheRoostersGarage]

1:50 "minimal impact on the hull" - That thing was stripping the bottom paint off with the barnacles and took it down to bare steel!!

[@iqbang9236]

I was wondering how much each cleaning + repaint job would cost for the big ships? Probably millions?

[@thesausage351]

The cost of the dock plus the workers would be phenomenal.

[@sqishybananananana4271]

The video: *cleaning a ships Hull* My daughter who knows what she likes: Tugboats!

[@Rick-tb4so]

What's the cost for a super tanker?

[@oumardiallo9564]

Formidable

[@floydwilliams3321]

Interesting

[@nidyachandra]

I want that job

[@tanjogok]

Memang bagus sekali

[@dejupp]

tell me, why tf you have music in your vid? WHY???

[@X-Machines]

Is it ok if I have nothing without music or audio?

[@dejupp]

@@X-Machines original audio. only original sounds. nobody is interested in your taste in music.

[@elconquistador98]

@@X-Machines yes

[@alexanderSydneyOz]

@@X-Machines yes, much better if you do not. Surely you look at KZbin videos also? If you do you will notice that videos with music in them are the subject of endless complaints. It is even worse when a video like this has a truly bizarre collection of incompatible different music.

[@treetop5752]

​@@X-Machinesmusic ruined this video

[@RedArrow73]

They should try Cleaning Lasers.

[@gajananphadte3440]

It is called Bow Thruster.... not propeller at 2.40

[@felixthecleaner8843]

09:30 are those 'Sacrificial Anodes'?

[@russianfish_VVO]

Кутое видео ❤

[@sunitadwarka347]

I want you to do one experiment with propeller, You take coconut rope and conver the propeller fan body with ropes, you cut the rope and put another rope each month, after sometime we will find some new method to cover propeller body. First experiment with this. Jay shree ram.

[@johnvalencia7488]

I always keep my propeller shined. The End.

[@Kymcook73]

Looks for jobs in hull cleaning immediately after memorized by this.

[@richsmith3300]

Haha me too

[@soldtobediers]

You can drive out nature with a pitch fork But it always comes roaring back again

[@richsmith3300]

In other words a constant supply of work and money😁

[@tinderbox218]

0:59 Trypophobia triggered

[@petercrossley1069]

“Reduce the damage that damages the propellers”. Who writes this gobbledegook?

[@hassamtv4152]

❤

[@darktoadone5068]

Looks like a very labor intensive job and a hot and sweaty one also, just imagine when they are doing this in the summer. If you're out of shape, not a job for you.

[@mannyfernandez6860]

thats the easy part actually..The tough drydocking jobs are inside those hulls.

[@Lifeindrydock]

Trust me it is Imagine it's wat I do in the gulf currently

[@makewithmegma]

🔥💕👍

[@soldtobediers]

A constant electrical charge should off set any contact growth. No?

[@denali9449]

And then you must contend with the corrosion problem you created by inducing an electrical charge to the hull. All those shiny silver things on the hull are sacrificial zincs to absorb the stray electrical charges due to dissimilar metals in the salt water. Adding more electricity to the mix will create more corrosion in the hull and fittings.

[@TheJimbob1603]

Great content ....... but, Robo-voice narrators are a plague on KZbin!

[@Mark-ml2tv]

Watching the various fouling removal methods, it is quite obvious that the environmental impact of the uncaptured and uncontained fouling was not taken into consideration.

[@mithunsivan1989]

I'm not going to buy a ship !!

[@TheSafetySmith]

Honestly, I thought there were bigger robotic systems for a dry or semi dry dock cleaning

[@mkarthik3065]

This not propeller from aft. This is bow thruster blade from fwd

[@sunitadwarka347]

Another method is make rubber body cover for propeller, using velcro or jip chain. Jay shree ram.

[@gguthary1]

Can't stand robot voiceovers.

[@X-Machines]

Could you please watch our newest video with new audio and give us more comment. kzbin.info/www/bejne/gKiYkn6wiql1h68

[@rp1645]

I remember those old B&W films of the PT-Boats, in wooden stays. The crew let the tide go out. Then worked hard on cleaning hull. And repair of bullet holes. I see so mean NEW boats at boat shows. With no paint on our drive. Or the bottom painted. New owner has to add that into cost. If boat is left in SALT water. There is NEW bottom paints coming out for large ship.

[@X-Machines]

This video is different.

[@seevalidedigama6525]

@@X-Machines 7ㅈ77

[@davidmarshall4971]

U

[@yehiaselim3774]

ما هو السعر

[@ruffnersedurifa7226]

@1:48 what is that equipment?

[@aglsports2]

What's with the annoying music.

[@simonmcneilly55]

Maximum cringe can’t be achieved without it

[@Pietabotha777]

Yes, it is really irritating... The video is interesting, but please lose that "music"!!!

[@oumardiallo9564]

Maximum

[@michaelburns8279]

Very interesting, except the mechanical voice and awful music really distracted from the video

[@bigjohn2810]

Bird dropping Welding @3;09

[@luigicristiani7709]

v Forgive me but the speed of editing the images gives me a headache!!! Too short time between shots!!!

[@maeln5425]

SIMA servicios industriales de la marina.

[@patriot-wf1er]

Horrible background music I shut u off half way

[@TheDieselStop]

Salt water is unforgiving

[@romashpak4270]

ON A GO WE JUST CALL SCUBA TEAM AND THEY CLEAN THE SHIPS HULL

[@mmoradiointeractive]

What is the music at 4:43 if anyone knows?

[@gokuLM10]

Annoying restaurant music.

[@niav6328]

Modern Attempt by TrackTribe

[@robertfish6617]

I was enjoying the video, but I had to turn it off because of that fucking horrifying music.

[@X-Machines]

I'm sorry about that, I will try to choose better music in other videos.

[@deepdiver51]

Just don’t put any music at all.

[@jasonantigua6825]

@@X-Machines Don’t apologise! People should be thankful that you put in the time and effort to bring us these videos.

[@booksteer7057]

We can create and launch the James Webb telescope, but they haven't found a way to keep barnacles from growing on a ship?!?

[@wdwerker]

I enjoy this type of video but the computer voice is awful !

[@X-Machines]

Thanks for your valuable comment. X-Machines is trying every day to create interesting and useful videos for viewers. Recently X-Machines got new narrators. Could you take a moment to watch these videos and give us your opinion on these narrators kzbin.info/www/bejne/gKiYkn6wiql1h68 kzbin.info/www/bejne/nnSnqJmMe61lbNE

[@carloschicue2608]

Cuanto vale un barco así de gigante por hay 2 millones de dólares

[@AbdulHafeez-cq6oo]

wahhhhhhhhhhhhhhhhhhh

[@AMG63]

3.10 that welding is atrocious 😩

[@Securitygord-w9g]

🎉

[@terryhackett2059]

underwater bottom=hull

[@user-oc5gh9lr4f]

Just bring a trailer and pull it by tundra

[@perdinantmakros3918]

they are just promoting their product.

[@SteveJohnson-fy7qr]

Is this a human voice or is this a goddamn computer?

[@thesausage351]

Another computer bullshit. Hate them. I’m just going to block them from now on.

[@johanea]

So much playing around. A bunch of Bangladeshi workers would have the hull cleaned and stripped off the paint in two days. Add another two days for primer and top coat of paint. Done. Doing thrusters while afloat is rubbish too as it cost a bomb, takes much longer and makes it difficult for all involved to work.

[@sohailwaseem6710]

Hello dear sir iam fitter i have 27 years experience in my technical field gove me job

[@mr.majestic8713]

The music is annoying there's no need for it. Thumbs down!

[@bally1213]

Good video, crap music 😳

[@anirbandutta2051]

soo many algaes and ol gets attached to them its so shocking to see