The Insane Detail - 9 month Wash Update - Alfa Romeo Brera Nova Coated

‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoffee.com/CCAD
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
(Nv Nova Pro- Coating On Vehicle)
Products used in video: (items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Tyre/Arch Cleaner: bit.ly/3SQOdmB
Wheel Cleaner: bit.ly/3e3b7bz
Wash Bucket/Grit Guards: amzn.to/3Ct6IqG
Kwazar Double Spray Bottles: amzn.to/3rP17Wu
Pressure Washer: amzn.to/3RSDGpT
Pressure Washer Gun: amzn.to/3VPEdw3
Pressure washer wand: amzn.to/3To64Sv
Wheel Arch Brush: amzn.to/3g0GsfC
Tyre Brush: amzn.to/3rQDvkp
Wheel Barrel Brushes: bit.ly/3EjheDh
Detailing Wheel/Trim Brush: bit.ly/3C9wJLk
Wheel Mitt: bit.ly/3fQZZPy
Foam Cannon: amzn.to/3CMFLj1
Maintenance Car Foam/Soap: amzn.to/3Tvhe7r
Drying Towel: amzn.to/3Tkw5Sq
Car Air Blower/Vac: amzn.to/3TNIAGK
Tyre Dressing: amzn.to/3D1fNIs
General Use Detailing Towels: amzn.to/3Cs06sn
Great Nitrile Detailing Gloves: ebay.us/Ewr3rz
🇦🇺 Australia Links:
Tyre/Arch Cleaner: www.waxit.com.au/products/shi...
Wheel Cleaner: www.waxit.com.au/products/nv-...
Wash Bucket/Grit Guards: www.waxit.com.au/products/eco...
Kwazar Double Spray Bottles: www.waxit.com.au/products/kwa...
Pressure Washer: ebay.us/Q0Ohes
Pressure Washer Gun: amzn.to/3Tp7Ti5
Pressure Washer Wand: amzn.to/3sjYnkc
Wheel Arch Brush: amzn.to/3TdsN3L
Tyre Brush: amzn.to/3EAbKUX
Wheel Barrel Brushes: www.waxit.com.au/products/con...
Detailing/Wheel Brush: www.waxit.com.au/products/car...
Wheel Mitt: www.waxit.com.au/products/cas...
Maintenance Car Soap/Foam: www.waxit.com.au/products/nv-...
Foam Cannon: www.waxit.com.au/products/nv-...
Car Wash Mitt: www.waxit.com.au/products/car...
Drying Towel: www.waxit.com.au/products/sup...
MetroVac Vac n Blo: www.waxit.com.au/products/met...
Tyre Dressing: www.waxit.com.au/products/nv-...
Great Nitrile Detailing Gloves: www.waxit.com.au/products/gri...
General Use Cloths: www.waxit.com.au/products/bli...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
🎧 Music tracks in order of play:
Airline by Geographer
Synergy by Geographer
Sky Skating by Geographer
#alfaromeo #ceramiccoating #carcraftautodetailing

[@WadeWilson-]

I gave this video a like even before youtube releases the HD version.

[@fiddycaliber947]

I was just thinking 'haven't seen anything new from Sandro in a few weeks' and BAM! The Brera returns!! Looking amazing, but what a fantastic job you did on the prep & application! Stay awesome Sandro!

[@NikosDIY]

That snow foam beading is possibly the best ad for your services. Great job, lovely Brera.

[@jamiec9866]

I remember the video of you doing your car. 9 months & it looks amazing! You get out what you put in, great work Sandro.

[@thetraindriver01]

Thanks for the update Sandro mate, the alpha still looks “Fully Sick” 😜😜👍👍👍

[@MrAumbra]

You can tell that the ceramic you used is high quality and the prep was flawless. Coating holding up and performing well

[@hanginwithsing1118]

Your videos are the best I’ve found. I watched Pan before I found urs. Keep up good work.

[@Clint_L]

Another cracking video Sandro. Informative as ever. She still looks great!!

[@hermansillem]

The beading and sheeting are so satisfying. I'm about to Gyeon One coat my BMW E90's bonnet, roof and trunk and can't wait to see it's abilities! Keep going like this :)

[@lunch6360]

3rd video in and I’m hooked! Good to hear an Aussie voice in a car detail video, Big fan of your work and your car, pity I’m on the other side of the city.. Sub.

[@neilbenzie3618]

Car looks awesome 👍🏻I bet it’s even better in the flesh 😀

[@richatfive-threedetailshop78]

I like your drying technique using the large towel.

[@therushden]

Epic 👌

[@guillaumeniedzwiecki5909]

Great work Sandro, as usual 👍👍👍 your alfa looks like brand new. Sorry, even better than brand new I meant 😉

[@AndrewKNI]

Brilliant job and a gorgeous car. Very special indeed. :-)

[@TheCowgirlNiamh]

Looks great Sandro!

[@4agePower]

Still mint! I was just in Melbourne and just had absolutely zero time :( - would of been great to pop in and see the man!

[@stevereaburn7626]

Nice work, great to see an Australian detailer releasing quality youtube vids (Unlike one in particular from Melbourne who thinks he is the best but constantly re hashes old pics on his FB Page) .

[@swift4062]

Top job sandro next the giulietta 💪

[@JacksonStrain]

Great video as always Sandro, I just got myself some carpro cquartz UK which ill Apply soon. I really wanted evo but with the special coating pack waxit had on sale I couldn't turn it down.

[@VaingloriousGabagool]

I wish I lived in your city so I could pay you to do a "Brera level" job on my car! By the way, please remember to do a review of the new Nova Boost when you can!

[@StephenJohnson-jb7xe]

When it does come time to re-coat the car, what work is involved in doing that? I have heard that wet sanding is required is that correct?

[@DonDomel]

4:12 for this Kranzle you have some custom wire or this water wire is stock ? Is it flexible ?

[@HutchDesigns]

I live in America and it'll be expensive to consistently buy the ones that nv has. What topper do you recommend on top of evo?

[@cast9609]

Beautiful car, wish I had access to them here in USA.

[@michelnarbonne3979]

Hi Sandro what type of kranzel power washer you are using ????

[@Jnaszty559]

I noticed you didn’t air blow dry the car , how did you deal with drips in crevices?

[@7071t6]

But as always love your work Sandro and keep it up mate. cheers :) Mate if only i lived in Melbourne, i would be buying a lot from Wax it store and have a less expensive options to help keep my car clean all in all, its the fuel cost driving down ( PS never do online shopping at all) and then the time effort to use a Ceramic coating, but in saying that i have always used meguiers products to keep my SSV Redline clean and to date the stuff is great and especially fast finish, i applied to the wheels/ rims and so far when i use the pressure washer and a iron remover like Bowdens or meguiers wheel cleaner, the water still replies and beads up after a good clean and polish which i did once about 3 months ago and so far its been great, the only thing i can say with confidence is no matter which good brand of products if you do maintenance washes and detailing you car it will stand up to the australian harsh weather rain and summer months, as a daily driver it still looks like when i first brought the car back in 2016. :) PS Meguiars new wheel cleaner is good if not better than bowdens, but only lasts for two sets of car wheels, because it foams up as it comes out of the bottle nozzle, which all you need to do is get a good spray bottle and put the meguiers products and have it set on a fine mist spray setting and then you have 3 or 4 sets of car wheels to do, instead of the two sets. :) So for 25.00 divided by 12 = 2 or bucks per rim or $1.50 per rim if you have 4 sets of rims ie: 16 wheels ?. :) Cant wait till the meguiers spray on SIO2 sealants comes out will be trying it for suer, especially now that winter is coming soon. :)

[@Adam-ff3me]

What's that you used at the end on your tires ?

[@CarReporter12]

Guess I was gonna suggest you to get the small wash gun. Kranzle gun wand setup is huge and becomes a little difficult to use especially for wheels. Oh and great video

[@MJJCvideo]

hi, are you interested in reviewing the MJJC foam cannon Pro?

[@luke6271]

Hey Sandro, I'm sure you're aware of the Mothers CMX Product. Are you going to cover those sorts of coatings?

[@jonoklease5562]

Great Job Sandro as always mate. What's the durability and slickness like on the Concours nova boost? Just like to add that I agree strongly with putting in the time for prep and coatings. I recently spent 65 hours on my mk7 Golf R going through all the steps, ended up going Kamakazi ISM for the coating and nova wheel for the rims, turned out mint, thanks for all your help and info Sandro.

[@jonoklease5562]

@@CarCraftAutoDetailing Thanks Sandro, so stick with Kamakazi over coat as a maintenance spray, got it. Will still get some boost as a think it may be awesome versitile product for piano black finishes ie interior etc. Thoughts?

[@nostalgiccars3111]

Great stuff...where's your big boi blower Sandro?

[@New777Wine]

What do you use to dress the window rubbers and seals Sandro? Great work as always BTW. :)

[@New777Wine]

@@CarCraftAutoDetailing Great, thank you. :)

[@kalashnikid47]

What percentage are your tints?

[@kazsiddique1]

what exhaust do you have?

[@sbrick9589]

nova boost review next please

[@YuriUK]

I bought ceramic coat from US last year to use it on my then 2 year old ATS-V Black out, and have been applying it 2-3 times a year and it works same if not better then yours bro! My cost was $80 USD here in Toronto and from 1 Litre I’m only down a half a bottle as it has spay end on it, its pink in colour and has no smell If anyone wants this stuff let me know ill give you a link, i believe it was from Amazon

[@chadluke1039]

Do you know why concourse hasn’t had the Nova pro for sale in the past couple of months?

[@chadluke1039]

@@CarCraftAutoDetailing Do you think they will ever offer it in the US?

[@aalfonso4706]

Hi sandro, quick question, I recently coated my car with CSL and EXOv4, we are buying another vehicle soon and I am thinking about using a different coating, Im debating between NV Evo and Cquartz UK/Gliss Combo. I really like that EVO is just a 1 coating product and it looks amazing when it comes to water behavior. But which one would you recommend? Also my vehicles at the moment are not garage kept and I live in Florida. Thank you for your answer and great video as always.

[@CarCraftAutoDetailing]

Well the same way you can use Gliss over UK, you can also use Nova Jet or Lustre or even both over Evo. I think that especially in the states the Carpro option is going to be better value and definitely more cost effective and quicker curing coating option - which is important especially if you’re going to apply them in the colder months and don’t have shelter while the coating is curing. Evo is a really fantastic coating, but it can take 2wks to fully cure in colder climates, you can use Boost over it after 24hrs to help protect it, but you really need to wait at least a week before Jet or Lustre.

[@aalfonso4706]

@@CarCraftAutoDetailing thank you I might go with EVO since I already own Boost , lustre and Jet . Thanks for your help as always , good thing is I got plenty of time to decide we are buying in may . Have a good one Sandro

[@Youknowitbby]

@@CarCraftAutoDetailing how would we go about layering JET & LUSTRE over EVO Sandro?

[@ramonjosesuarez5813]

Therapeutic ahhhh

[@shaniranikauboj]

360p squad :D

[@c6z061]

LOL!

[@Denbig.]

High quality car low quality vid. Go figure.

[@WadeWilson-]

To remember the good ol days of KZbin when no one had HD equipment.

[@c6z061]

@@Denbig. Sandro never shoots videos in this low of quality. Not sure why this time.....

[@gufiaito69able]

3 people accidentally hit dislike.

[@Relevantium]

Ммм))

[@ulky_]

First :D