The Masters of Sum - TX Interfacer, TX Underfacer and Output TX

[@nghiemtuananh7521]

Can I use the Interfacer as a 4 cable method (connection to the amp's fx loop)? Thank you

[@GoodwoodAudio]

It's not designed for that purpose, but if you're up for doing some workarounds, you could. You could plug guitar into the buffered input as normal. Dry pedals. Then into the left IN/OUT to amp input. FX Send on amp to through passive IN. Passive OUT to first wet effect. Right in/out to FX return.

[@briankliewer5906]

Im starting to dabble in dual amp rigs, is there a way, without using a complex midi-switcher, to set up one board to run 2 amps but AB toggle between stereo AND WET (summed to mono)/DRY? This content is very helpful! thanks

[@GoodwoodAudio]

Easiest way to go between those two options is with a junction box. You could do a combo between some AB switching and a line mixer. I'd suggest the best way being a custom junction that houses all of this into one box though. Without this sounding like a shameless plug... We make exactly what you are describing a lot through our custom shop. feel free to email me if you like for a quote. [e-mail]

[@JazzRockswithAdam]

Will the phase switch help with any phase issues when summed? Or is that only for stereo with two amps?

[@JazzRockswithAdam]

Mom I don’t know. You’re assuming all pedals and all manufacturers design everything the same. Which I highly doubt.

[@GoodwoodAudio]

If you are getting phase issues between amps, yes it will fix that. If you are getting phase issues between the two lines from your board (would only happen if you were summing two mono lines from different pedals) then it won't fix that since the summing happens before the phase correction if that makes sense. To sum up (sorry) if you're running stereo into these products from a single pedal, you're phase issues will be covered. If you're using these products as a line mixer (summing two mono lines) it will not solve your phase issues.

[@JazzRockswithAdam]

@@GoodwoodAudio Got it!

[@robertemacovei]

Does the Underfacer have a passiv input too? Or it's just the interface that has that option? Thanks

[@GoodwoodAudio]

Just Interfacer. Underfacer doesn't have the room unfortunately.

[@callumfurneaux]

Would you guys recommend using the interfacer for a wet/dry rig or would the splitters you mentioned in the WDW series work better?

[@GoodwoodAudio]

If you wanted to run a traditional WD rig, I'd go with the splitters in the series. however, if you wanted to run a Pseudo WD rig, the Interfacer / Underfacer would do it! I just posted a new vid "Alternate uses for Interfacer, Underfacer, Output..." It explains how to patch in a WD rig with Interfacer!

[@callumfurneaux]

@@GoodwoodAudio awesome thanks so much! saw the new vid the other day and it does a phenomenal job of patching, it was just what i was looking for!

[@Cox_Taufik]

how to change Master mute??...Output Mute or Input Mute,i have 1st edtion Interfacer (with mini toggle sum)

[@GoodwoodAudio]

on newer versions it's an internal DIP switch.

[@NHail]

what's the difference between sum and mix modes on output tx?

[@GoodwoodAudio]

not much.. but essentially Mix allows you to mix down two different signals (dry and wet, differnet instruments etc) where as sum assumes you are sending from one stereo pedal.

[@logant7936]

Does this have a balanced output option?

[@GoodwoodAudio]

Through our custom shop, yes! But not on the stock options. We have a few junctions on the website that combine these features (such as the WDW Junction), but the versions in this video don't have balanced options.

[@cptncanela]

First that does not apply to bass, right?

[@WilliamCarlosG]

Actually, they have an Interfacer TX for bass and acoustic guitar if i’m not wrong tho

[@cptncanela]

@@WilliamCarlosG they have indeed, and I have it 😁

[@WilliamCarlosG]

Josías Canela nice man! I’m saving for one of those too. It sounds like you have the arsenal to do stereo😄

[@cptncanela]

@@WilliamCarlosG Well, I only have a bass interfacer. It runs two channels (dirty and clean), which allows me to get a better sound out of my pedals. It really does the job, so definitely, you should get it!

[@GoodwoodAudio]

This is a bit different for Bass where you're running 2 mono lines and mixing. Both have separate uses and the summing / mixing is implemented differently on both.

[@Solidsoundfx]

Do you have a dealer in Europe ? Plz zzzzz

[@GoodwoodAudio]

not yet! sorry. Who should we look into? What's your fav. store in EU?

[@Solidsoundfx]

@@GoodwoodAudio you want to go smal and local ore big ? For smal go to The Fellowship of Acoustics, and if you want to go big maybe Bax music ore Thomann

[@oneandonlyarajivp]

@@GoodwoodAudio thomann, bax music, guitar guitar - they are the best! I've bought things from them and their service and customer service is exemplary!