"The Original" Unrestricted '99 Busa gets dyno tuned by Moore Mafia

[@gaddy8964]

The original OG Street Bike Bully from back in the day..fun memorable times when this bike was released. ZX-11's & Zook 1100's were ruling the streets back before the Busa came. Ahh the good old days..!

[@ericwilkins8951]

Still got a 93d zx11 love that bike got way to much money in it

[@moorepower13]

I remember the group ride i was on when a brand new Busa showed up. In a pack of current (90's) sport bikes I have never seen anything leave the lights like that thing.

[@berube361]

Don't forget the zx12r. That was direct competition for the Busa before it was discontinued. I had a 2000 zx12r which was also an unrestricted model and beat a few busas. Was always a close match up depending on modifications.

[@tysoncott7402]

Agree’d, the 90’s & early 2K’s were great great times to be a sportbiker!

[@taters7359]

Old slingshot gixxer 💪

[@K-carbon]

Thumbs up if you like chris to show us the setting up the dyno what the cables and probes do and how they connect to the bike wiring etc

[@kennethpowers8995]

The dyno isn’t really connected to the vehicle your running per se. You strap it down so it doesn’t move around during your run, hook up a lead to pick up the RPM signal like you would with a timing light, put your sniffer in the exhaust for the AFRs and your ready to go. Depending on the shop setup you may hookup an exhaust vent hose or something but that’s really all there is to it as far as getting on the rollers. For the tuning that isn’t related to the dyno and is a separate event. You take your laptop with whatever tuning software you use, I believe he uses the Woolich Racing software, and then the proper cable for the bike your working on using a bike side harness. They make different ones that will go For the different styles of ECU, Kawi Type C, Mitsubishi etc all have different plug types. But those connections are simple as well, USB to the laptop and then you have an interface box with the proper cable to connect to the ECU type and your ready to tune. They make bench side harnesses as well where you have to remove the ecu and take it off the bike to then go flash it but they typically aren’t used for live dyno tunes.

[@Senior-Busa-Rider]

Thank you I still want one for sure even at 72 years old 🦅🇺🇸🦅🏍👍

[@gsxrpat6147]

Best decision you could make brother. I always tease my godfather for selling his Busa and bought a GS1200. He should have kept the Busa for sure

[@chicblair]

Kim , age is but a state of mind . I was talking to a guy who was riding a Triumph Trophy who is still riding at the age of *82* 😁👍

[@Senior-Busa-Rider]

I just sold my last 2 motorcycles will get Busa as soon as I can

[@chaz951]

I'm a veteran of Willow Springs out here in SoCal. Just pick up a 04 Busa. All I can say is a great bike. Its like a gentle giant& does everything well. If you need the heart rate to go up just twist the throttle. Chk one out is all I've to say!!!

[@Senior-Busa-Rider]

Big Dog Rolln I will be looking for a Busa before end ofDecember for sure so if anyone has one let me know please 🦅🇺🇸🦅 Army 1967 to 1970 will be doing run for the wall on my Busa 👍🏍

[@DerrickCrowleyTV]

The sound of the Busa is like music to my ears😁 way different than any other bike that u have put on the dyno. #teamBusa👍

[@muckle8]

The best super bike ever made - the gen 1,s are beasts!

[@HayabusaEngineSoundCH]

The Gen 1 Hayabusa is the lightest of the three models ! That is the sportiest proof. 　🍉Gen 1: 244 kg (equipment weight) / 175 hp 　🍎Gen 2: 266 kg (equipment weight) / 197 hp 　🍓Gen 3: 264 kg (equipment weight) / 188 hp

[@hiroshiphillipnakamura5358]

I had one of these factory fresh in 1999. Nice to see a super clean survivor making even more power!

[@williamwagner9651]

I like the new intro that giant wheelie was crazy

[@taters7359]

Good clip all the BUSA's i raced back in the early 2000 guys claimed 200+hp with full exhaust and power commander . Old 92 slig shot tookem down in the 8th mile 💪

[@rolandkoczka7895]

176HP from an old Busa is not so Bad Dude. This thing is over 24 years old. Very well. 👏

[@bryanharrison3889]

Welp, you said it had a cam, I can hear the cam.... I didn't think I'd be able to because you said the internal work was mild, but I can hear it. It DEFINITELY sounds like its breathing good.

[@coryrichter3621]

I converted my 99 to the 02-07 Ecu. Then reflashed with the PC for my boosted engine. Just a haun system with the Super G20.

[@rameshjagaswaren8928]

I own a 2016 Busa and i pay homage to this first original Falcon

[@xever1k635]

I do gotta say myself loving that new intro! 👍🏻🔥

[@leonvanheerden8054]

I am in love with all busas🤩 Thanks for doing so many busa videos man! Subbing was worth it

[@ChaseN194]

What's crazy is that a modern liter bike makes more.

[@brandonpittman5243]

But not many can match that torque

[@christinesommerfeld9815]

Can't match the durability. Don't see many stock busas blown up vs. The liter bikes of all makes.

[@Jandejongjong]

Crazy to see all the pony’s are stil in there!

[@sollydogg]

99 busa is definitely on my wishlist 🔥

[@AKUMARIDER]

yet another beast with sharp claws with the MOORE MAFIA treatment !!!

[@ex-squid3575]

The king of Superbikes

[@t.s.racing]

Chris, my ex girlfriend used to cause me to itch as well, do you have her locked up in the warehouse? If so thanks brother !! 👍👍🇺🇸🇺🇸🏍🏍

[@TeamMooreMafia]

😆 🤣

[@TEAMWRIGHTEOUS]

😂😂😂

[@Tuforeal]

I absolutely love my 2000

[@facelaw674]

Keep up the gd work chris your making a difference out here for those who didn't know about the stuff your doing out here and for tell the world more about going fast and racing thanks for everything your doing from the 513

[@daveyt4802]

Wait for the exhaust to turn white. Usually can smell the race gas on the street.

[@TEAMWRIGHTEOUS]

This is awesome... How much power did it gain just pouring in the MR12? Also my bike was previously tuned for K16 (I used Q16 in it). He did this because he eventually planned to use nitrous with it (I questioned why he would do that on oxygenated fuel 🤷🏻‍♂️) Anyways I poured in MR12 and gained 2 tenths and 5 mph. I was thoroughly impressed with it. Can you do a video showing horsepower differences between different pump gas and race gas(U4, Q16, MR12). That would be an awesome learning experience.

[@nikotoawoski7349]

I really need to get my 04 buss tuned. Just been debating getting some work done first.

[@bakarriclark8874]

I have a few more parts I have to order, then I’ll get to bring my 09 1k to get touched by you!! Keep up the good work @MooreMafia

[@mauricebramao3111]

Nice to see older bikes still running good. Think you could get hold of a 03 gixer 1000 and see what can be done.

[@SN95.0]

So fresh, so clean.

[@randomdad24]

"unrestricted" That word pains me!🤣🤣🤣 Especially when you see it as a selling point on craigslist lol

[@TEAMWRIGHTEOUS]

But it's true of this bike. The rest had to be done by someone. But I did hear a good one the other day about the 99 being the only one that would do 250 mph because it was unrestricted 😂 I'm like dude, it wouldn't even do 200 mph, much less 250mph.lol

[@jpslaym0936]

@@TEAMWRIGHTEOUS Yeah 194 mph for 99, the 2nd gen Busa does ˜203-207 mph with speed limiter removed and stock motor internals

[@TEAMWRIGHTEOUS]

@@jpslaym0936 not stock the 2nd gens don't. Their gearing won't allow them to go that fast.

[@05EVORS]

@@TEAMWRIGHTEOUS run a 200/55 rear to make ratio taller and handle better = win/win

[@carbonconnection2480]

I had a 2000 model back years ago. I want to say mine made 162? Can't remember

[@christinesommerfeld9815]

My 2001 Busa Akropovic and PCommander 2 and Ivans T.R.E. dyno'd at 162.

[@daithilacha1]

@@christinesommerfeld9815 That sounds a bit low as first gen stock Busas in the UK typically made 158-162 Rwp bone stock. 160-161 hp was a typical figure and 99 ft lbs of torque was the norm. So I would have thought your bike would be up at least 8 hp with the exhaust and tune. I assume just an end can ?? I owned three first gen Busas back in the day but left them stock as I like the balance of two end pipes and the bike had more than enough power and torque for me on the narrow twisty roads I ride here in Europe.

[@meltingpotracing]

Hell ya love the busa good video Chris

[@Bacongrease00]

Not bad I’ve seen these make around 150-160whp fairly stock for gen 1 motors

[@DudeMungus]

Duuuuude lovin the intro!!!!!

[@muhammadsteinberg]

For all the hoopla of the gen1 busa I believe you dyno'd the stock gen3 busa and it came out better.

[@blackiam6527]

Nice job Chris can’t wait to haul my 2004 busa up there

[@jaynathbasumatary811]

I'm getting very much excited to get one of it. ❤️❤️❤️

[@aaaaaaaaaaaaaa4151]

Many people fail to understand its torque + bike weight that makes the difference......

[@waynebarnes1369]

These new 1000cc bike are coming with 190 to 194 hp after the ecu flash. And the new 22 busa is coming out swinging after the ecu. Old bikes have nothing on the newer bikes. They said the 99 busa with beat the new ones. I don’t think so. Wonder if the cam work helped or it slowed it down. And that exhaust looks likes it’s holding to much back pressure. He should try a different exhaust and back tire.

[@yanroeung6289]

Those Carpenter scoops says a lot about this bike lol

[@bluejackson4480]

Hey can I put an 03 an up hayabusa ecu in my 2000 hayabusa? Interested in getting my ecu flashed for the engine kill to run an airshifter

[@kaosncompany77]

Put some cheap vinyl over gaps in insulation, reinforced with duct tape

[@fabricationnation8052]

Chris, I have a 99 busa that I need tuned, but it's no longer a motorcycle....Its in a custom buggy that I dirt drag....so what do I need to be able to tune it? Just a power commander? Also I need a quick shifter hooked up, can that be done with a stock ecu

[@Senior-Busa-Rider]

I will be looking for my Busa very soon 🦅🇺🇸🦅🏍🏍

[@JR1300r]

So what HP and torque numbers would a standard BUSA give

[@daithilacha1]

Typically 160-162 and 99 ft pounds.

[@ridermod4098]

Another great vid, I love to see older bikes making power. Can you flash an tune a zx12r?

[@perf5th]

Man your intro is 🔥 🔥 🔥

[@vespagrt]

che bellezza!! ho la stessa moto, monta la power commander come centralina??

[@chaz951]

I was like damn Chris doing the thug life thing today...lol. Hoodie looking dope, the O.G. Busa on the dyno. So switch the tire extra 5-10 hp? When can we see a turbo on the dyno to put some fear into the new bikes??

[@garypurnell5948]

Okay Chris Moore fans quick trivia. In a sanctioned race (IDBL, PROSTAR, MIROCK, SOUTHERN CYCLES, XDA, ect) 1- how many races has CM won, 2- how many records has CM set, and 3- how many championships does CM have?

[@300zxdriver]

How many degrees more timing with m12 ...I’m thinking maybe 2 more degrees. I was interested in this video because Brocks recommends 87 Octane for the busa ...say it will run a better quarter mile time.

[@oneyedmonkey87]

I thought you guys said you didn't tune 99 or 2000 busa's?

[@anuragsingh613]

Hey chris can you dyno tune my superduke 1290

[@Senior-Busa-Rider]

That’s for sure 🦅🇺🇸🦅🏍🏍

[@MuzammilCalicut]

Gen 1 Hayabusa.❤❤❤

[@busabro6533]

Hey Cm$ what is your intro song it’s crunchy and I want it on my playlist!

[@bartbug1]

Nice, what sort of exhaust system does have 🙂👍

[@aristotlerobinson9263]

Could you swap gauges cluster on the hayabusa I don't like the big clusters

[@mattsloop2736]

How does a tire rob horsepower? Serious question.

[@sollydogg]

Softer compounds grip on tarmac but not so much on metal rollers harder compound work better

[@jeremyfinister9409]

Hey Chris I just purchased a 99 busa, trying to see if you can dyno tune it for me? It has a power commander as well.

[@chosyn187]

Did he just throw an intake cam on the exhaust side or is it a brand name cam? Ported head?

[@AbsoluteFidelity]

Its crazy how a MR12 tuned and cammed '99 busa's hp look so low (hookups regardless) compared to today's bone stock 1000s. We have come a long way. Back then this busa would literally eat anything on the dirty streets.

[@carlosholmes8924]

That was when u had to be a rider when first that beast key word no restrictions

[@geraldperry7779]

Keep that baby as stock as possible.

[@djwilliams9842]

lost my phone so had 2 comeback and watched the video.

[@boosted1241]

How much do u think the hookup robbs for the real number??

[@TeamMooreMafia]

Usually around 10

[@justforlaughs8988]

What stage Cam?

[@Captain_Deadpool68]

What is wrong with that tire? what tire should you run?

[@Raidel36]

Nothing wrong with the tire but since it’s heavier tire it causes the dyno to read a little less horse powrf

[@steveyork8069]

ThePhantom0068 He has said on several videos it slips on the dyno drum.If you watch the second pull you can see it ride to the right on acceleration on the short power burst when getting engine up to temperature.You could probably go back through his videos he has even done some major burnouts on that tire trying to get it sticky but it still spun on the drum.

[@steveyork8069]

It’s basically half the price of a Dunlop drag tire depending on where you buy it.

[@jamiegrant7263]

What's is a good tire to go with

[@steveyork8069]

Jamie Grant If you are just drag racing Dunlop drag pro,I do a lot of street riding and have many great curvy roads in my area I like the Pirelli Diablo Rosso Corsa ll or Diablo Rosso lll,Dunlop Sportmax Q3 or Q3+ are also quite good.Bridgestone RS10 or RS11 are aggressive the hypersport S21 and 22 have great following also.I would research on those read testimonials and price them to see what fits your situation best.

[@KobaBlack113]

Have the new Gixxer 1K closed the gap on the busa HP potential.

[@moorepower13]

That question has been answered by Chris so keep watching his videos. But your question is kinda "How much sugar do I add to this apple cider to make it taste like o.j. ?"

[@300zxdriver]

What brand pipe is that? It has head work and cams? My 2004 made 162 with akra and small air box mod with power commander. I would have thought head and cams would yield higher horsepower numbers.

[@one60studios74]

That shinko hookup makes it read a little less on the dyno

[@tomjones3629]

The hookup will make the dyno read 10 to almost 20hp less. The real deal is not what the dyno shows but actual performance

[@cedriclee-carter8809]

What cams are in this bike?

[@MidwestPerformanceTuning]

whenever anyone anywhere breaks out a can of MR-12.......we can smell it from here

[@jamespurdy5725]

I've got my hands on A 98 busa with less than 20"000 miles on it with hmf high lift pipes,,,,, offers,,,,,

[@kristophercarter2837]

Hey can u tune a 07 Gsxr 750 with mr12

[@baileynorth]

Could you tune a 99 zx9r?

[@chicblair]

Bailey, Chris could tune a Wheelbarrow if you took it into him 😁👍

[@berube361]

Yeah if you mess with the jetting. Cant just plug it in like a fuel injected bike and change the map around.

[@gooplain7125]

Is it for sale that's a sleeper

[@baileynorth]

@@gooplain7125 for 3500 lol

[@baileynorth]

@@berube361 thought maybe he could since the busa on here should be carberated

[@rubbersatin]

That's roughly what my 2000 zx12r made with a Pipe,PC and BMC. Hmm

[@daithilacha1]

I got 170.5 rwp and 85 lbs from my 2008 R1 with Akra end cans and custom flash on a very hot day.

[@fivespeed3026]

I’d do something about that insulation ASAP. It’s got to be really bad for your lungs, probably much worse than what it does to your skin.

[@natelsx]

Why can’t you tune the 99-02s ?

[@TeamMooreMafia]

Ecu is only 16 bit.... aka not capable of being flashed

[@Smoky__infmou]

Love ur vids bro u know ur shit I see.

[@moparone7962]

Don't breathe too much of that fiberglass, you'll get f'ed up. Another great video though, thanks.

[@TeamMooreMafia]

I know! Hopefully I'll have everything fixed in the next day or two

[@Dre_Cue88]

Yo chris I have a all stock 51k 99 busa and I would love for you to do a power commander with a pump gas tune on it. As you can see in my profile picture it’s the same color as the one you just posted and also it’s swb running Michelin road 5’s instead of shitko’s.

[@TeamMooreMafia]

Email me through the website to schedule an appointment. Www.MooreMafia.com

[@Dre_Cue88]

@@TeamMooreMafia doing it now.

[@matthewmiddleton8371]

Why no pull

[@jonty4664]

🤘🏻🇬🇧

[@Jandejongjong]

T-shirts Stickers keychains strapons

[@taters7359]

PANDEMONIUM COMING IN NOVEMBER

[@nicety65a]

Hey Chris I was told through a email that you don't work on anything older than a 04. What gives?

[@chicblair]

Tunning older bikes means (jetting) and balancing , time consuming and not much gains. Ecu tunning on the newer bikes Not so time consuming, and more beneficial 👍

[@moorepower13]

He is using a power commander to make the changes.

[@chicblair]

A power commander is not a quick fix for power gains, but will take some of the dips in the way the power is delivered..

[@nicety65a]

Thanks for your input, but that has nothing to do with my email to Chis.

[@kwak1k]

Wanted to see a bog standard 99 on the dyno. Oh well

[@dirtyversa3165]

I would have at least stapled some tarp on the ceiling. Like, why are you just living with this nonsense?

[@cirino1995]

Why arent u wearing a mask 😷

[@Senior-Busa-Rider]

I will be looking for my Busa very soon 🦅🇺🇸🦅🏍🏍

[@Critastic]

I read your other comments, please do it buddy you will really enjoy it! 72 is the new 40 haha! Life is too short to limit yourself.