The PRO coating ANYONE can apply! | KAMIKAZE ISM 3.0 Review

Kamikaze ISM 3.0: www.esotericcarcare.com/kamik...
At ESOTERIC, we believe ease of use tops everything when it comes to detailing products. What good is a magic "10-year ceramic coating" if it is impossible to apply correctly? That's why we love KAMIKAZE-Collection's newest version of ISM Coat. Up to 3 years of REAL-WORLD durability, insane water beading, and an installation process that won't make you want to hang up your detailing apron in frustration.
Join us as Todd reviews what is new about ISM 3.0, and takes you through our simple application method step by step.
Products Featured:
ISM 3.0: www.esotericcarcare.com/kamik...
Miyabi Coat: www.esotericcarcare.com/kamik...
Prep: www.esotericcarcare.com/gyeon...
Yellow microfiber: www.esotericcarcare.com/the-r...
Purple microfiber: www.esotericcarcare.com/the-r...
Pipette: www.esotericcarcare.com/esote...
Microfiber applicator: www.esotericcarcare.com/autof...
Overcoat: www.esotericcarcare.com/kamik...
Cosmic Spritz: www.esotericcarcare.com/polis...
Water Spot Remover: www.esotericcarcare.com/kamik...
ESOTERIC Products
www.esotericcarcare.com
Facebook and Instagram: @EsotericDetail, @EsotericProducts
New videos EVERY WEEK: bit.ly/2uFUJGy
Contents:
00:00 Introduction
00:18 The origin of ISM Coat
02:05 Why we STOPPED using ISM 2.0
02:33 What is new with ISM 3.0?
03:51 Miyabi VS. ISM VS. Zipang
04:18 What can ISM be applied on?
04:44 How long will ISM ACTUALLY last?
05:25 Can I layer products with ISM?
06:20 How SHOULD I maintain ISM?
07:10 How SHOULDN'T I maintain ISM?
07:50 What comes in the box?
09:22 Application Tips/Demo
16:02 Post-coating cautions
16:28 Applying during humid temps
17:12 Applying to plastics
17:50 Final results
18:37 Related Videos

[@Esotericdetail]

If you're looking for more detailed information on how to be better at paint correction and ceramic coating, then check out our new ONLINE training at: www.esotericdetail.com/education

[@tsifty1]

Many channels out there talking about car detailing but only with Esoteric I feel the sincerity honesty and brilliant advices. Thank you for being on KZbin.

[@Esotericdetail]

Thank you kindly...that's how we run every aspect of our business(es).

[@laurapalmerTDGE]

@@Esotericdetail - todd! To prevent the donkey from making the same mistake twice (pushing the bottle coating) there is a very simple and cheap solution. Take an old pad, make a hole in it the size of the bottle, place the bottle in the pad on a table, etc. I do it and learned it from a competitor. ahoy!

[@Esotericdetail]

@@laurapalmerTDGE Thanks for sharing!

[@stanleyrimpson5756]

Yeah this channel and Scott from Dallas Detailing are completely honest!

[@tootsiejoon]

Thanks a billion Todd! Your informations are priceless!! You have the best job in the world😁

[@angelae3997]

Been waiting for this one to drop!!! So excited to try it!! 🔥

[@Esotericdetail]

Let us know how it goes, Angela!

[@ronayotte3571]

Another excellent review and teaching moment. Thank you!

[@DasJav]

Thanks for continuing to put out these informative videos. Going to attempt my first ceramic coating soon. I want to fill in some rock chips first, though. If you guys do rock chip repairs at the shop, could you do a video on it?

[@jacobheinz8236]

Thank you! I like the way you explain things.

[@TheCarDetailingChannel]

I’ve never used any of the Kamikaze coatings but going to in the future as it looks like a fantastic brand. Plus bottle looks like some slick cologne

[@Esotericdetail]

It's awesome stuff indeed...you can't go wrong!

[@gregfoster8737]

Absolutely awesome video. Thank you!

[@Esotericdetail]

Glad you liked it...thank you!

[@randomrangoon5476]

Never used it but would love to be able to sample it before using it in my business. Looks great

[@Esotericdetail]

We have built a service business around it, and so can you. Pick up a bottle and it will make you re-think coatings. www.esotericcarcare.com/kamikaze-ism-coat-3-0/

[@E90s65]

Hi Todd! Many thanks to making great videos. I typically use SyncroQ2 but thought I would give this a try as this video inspired me to try something new. I think the bottle has a problem in that its form over function is getting in its way. while I did hear you say be careful that it would fall over easily, I should have duct taped it to the table. it most certainly fell over and lost 3/4 of the product which was disappointing. I wish you could relay this problem to them or give me the contact to and I most certainly would convey the problem. I was very careful, so I thought. I did try a little test panel and wanted to do a back to back on Mohs/skin. I do feel the Mohs had a deeper gloss and depth look compared. just wondered if you ever do a side by side. I love watching your program. just hope that anybody see this video and reads my comment might be extremally careful when handling this bottle.

[@PeteyMcSavage]

Like the videos Todd. Good stuff

[@Esotericdetail]

Thank you!

[@andydocwra7242]

Another great video. I would like to see one about 'KAMIKAZE COLLECTION NO.4 ANTI-AGING TREATMENT' this seems an very interesting product but can't find out much about it

[@tpike32]

Been using Nova Evo.. great product.. but going to try Myabi 👍🏼

[@gregoryknotts653]

Todd you really need a bigger shop! I think there's even more cars crammed in there than there was the last time I was there!

[@Esotericdetail]

We needed a bigger shop 5 years ago! We're working out of 5 different facilities, yet we're still crammed everywhere.

[@bryanpieper2333]

Hey Todd, thanks for the great video. I’ll be getting a 2024 Porsche Macan GTS in the next few months and plan on applying ISM on the front end black plastic/satin surface as well as the black plastic diffuser. What would you recommend as a sacrificial layer of protection on plastic to protect against possible water spots? Polish Angel Black Bond? Or would Cosmic Spritz be okay to use? I know Cosmic Spritz does not stain plastic. Thanks.

[@aounsflock2071]

excellent review. I am thinking about doing combo of all 4 coatings of kamikaze i.e miyabi, miyabi graphene, ism and zipang. What sequence should i go with? i am thinking about miyabi zipang ism miyabi graphene and then again zipang

[@Vchauhan56]

@ESOTERIC I Plan on using the ISM 3.0 on my whole car besides the items that cant be coated with ISM 3.0, would we use the Kamikaze collection to maintain the ISM coating? like anti-ageing Kamikaze soap, Overcoat after each wash? and the Kamikaze glasses cleaning since ill coat that with the Kamikaze glass coating? and what would we use too maintain the coated wheels? or is it also safe too use Gyeon Bathe (regular not plus)

[@kyleltg]

In the MYABI instructional, you advise doing a second pass in the same spot to ensure coverage. Is this also true of ISM 3.0? Thanks, great vid!

[@Esotericdetail]

You can, but I don't find it as necessary as it is with Miyabi. If you do it that way, and find that it becomes a little more difficult to remove, then simply cut back down to one pass.

[@ruslankontsimal7072]

Great video! Getting ready to put some ISM 3.0 on a black Mercedes. I am curious though, what the best course of action to take would be if say, within 24hrs of initial cure, or even within the first week, the car gets hit with a bird bomb or tree sap or some other environmental contaminant. Of course I can imagine we’d want to act fast, would a spritz or two of Kamikaze overcoat on a plush microfiber towel be the way to go?

[@Esotericdetail]

I'd just try to flush it away as best as possible with some soap and water!

[@petejackson3113]

Hi Todd, thanks for your informative video. Much appreciated. I really fancy giving this a product a go on my Ibis white S4 but first I have a question for you. On a white car how do you see where you've been? I want to be sure that Im not missing bits? Thanks Pete...

[@Esotericdetail]

Pete...coating a white car is challenging for sure, and you have to have some good lighting to make the most of it. I find that looking at the surface from an extreme angle really helps to see where the coating is. On the hood for instance, get low to the surface and look across. You should be able to see a different kind of reflection from the wet surface in comparison to dry. After a panel or two, it should become easier once you get a feel for what you are looking for. Good luck!

[@garylonatro6265]

I have a question hoping someone can answer.. I have a 2017 toyota tundra with pro comp factory matte wheels that my wife took to the car wash and now the wheels have a white chalky film on them . I have tried to rewash them and it's will not come off .. need help asap

[@BiondosGarage]

Todd I’m struggling to understand how do you know when it’s probably bonded and it time to remove?

[@IdkWhtYouDid]

Will you guys have a video on the wet application on this coating? I saw in their video that is an option. Also, is a zipang 2.0 video coming soon?

[@Esotericdetail]

Probably not on the wet application as I don't see it as necessary. New Zipang is in the works.

[@carlloftin2850]

Can you please review how to work the product around the badging

[@Esotericdetail]

It's really simple...just apply and wipe off!

[@Psgatlanta]

Great video. Curious. What kind of watch? Is it the BB gmt by chance?

[@Esotericdetail]

Thanks...it's a Tudor GMT

[@fiorenzoorlandinotti8427]

Hi, super top video and explanation as well! what about top products for matte-satin paint? can I use the same? Even based on the fact that I do have both Matte paint and shiny cabon fiber. Ism3 plus cosmic or over coat? zipang? Enrei coat? thanks!

[@Esotericdetail]

Thanks. Yes, you can use this over satin finishes. It won't make them "glossy", but it does add a richness to the finish. Just make sure you get it right with no high spots because you can't go back and polish it off like you can on glossy paint. You can then maintain it with either Overcoat or Cosmic Spritz.

[@aounsflock2071]

Hi i am thinking about doing miyabi 2.0 as a base coat and on top of that zipang 2.0 and on top of that miyabi graphene and then top it off with zipang 2.0. Isit a good idea? Also can i apply miyabi 2.0 and then zipang and then leave it for few days and then apply miyabi graphene and apply on top of that zipang?

[@davida7713]

When are you going do a video of the new kamikaze miyabi 2.0 ? Quality content btw

[@Esotericdetail]

Thanks. Soon...I want to spend more quality time with it before doing a video though, and we literally just got it.

[@davida7713]

@@Esotericdetail wonder if it’s slick & more hydrophobic v’s the original version . I’ve just became a certified kamikaze collection installer in the Uk so excited with future with the brand

[@Esotericdetail]

@@davida7713 It is...

[@rix350]

Many thanks for your time and great videos. What’s the advantage of stacking it vs. ISM alone? For the same price point to buy both to stack (Miyabia/ISM) you can almost buy Zipang? What’s a better looking product of the three options mentioned above? I would rather have a coating that looks good for 12-16 months over longevity.

[@Esotericdetail]

You'll get just a little more durability with the Miyabi/ISM than you will ISM alone. Looks are subjective, and the "preferred look" of the coatings may change depending on the color of paint it's going on. As for Zipang, it's the top so if you want to know you're applying the best of the best, that would be your go-to.

[@arapaimagold8088]

Zipang can gives you the finish of Zymol Royale. Any old timer in detailing business knows the unreal depth of that wax. Something that unmatched by any waxes till today. But you must prep your paint to to the absolute level first to get that mind bending look.

[@ProjectHumanWeapon]

@@Esotericdetail what about on an xpel coated car, does zipang still stand out for looks?

[@b.bimmer4688]

Hi Todd, Great video ! I wonder what does Kamikaze offer to maintain their ceramic coating ? If they do offer something, is there a video of that on the Esoteric channel ? What is the equivalent from Kamikaza for Gyeon Inifinty type I ? cheers !

[@Esotericdetail]

Kamikaze Overcoat: www.esotericcarcare.com/kamikaze-over-coat/

[@b.bimmer4688]

@@Esotericdetail Is that all they offer at the moment or is it that good it’s all you need ? I come from Gyeon DuraFlex moving to Kamikaze Enrei applied by a pro certified detailer and want to achieve the best results for years to come. Gyeon has a much wider maintenance product line so I wonder if it’s expected that Kamikaze will expand their maintenance product line in the near future? BR Beemer fanatic

[@Esotericdetail]

@@b.bimmer4688 It's all you need. Overcoat is really a fantastic coating maintenance product and it has been in their lineup for many years now as the go-to for maintaining all of their coatings.

[@findmeifyoucan]

Now that Gyeon Mohs evo applies just as easily as Kamikaze, there needs to be a huge difference in durability for the average consumer to want to buy Kamikaze (especially when kamikaze is like double the price).

[@Esotericdetail]

While Gyeon has definitely stepped up in ease of use, it's still not as easy as Kamikaze. ISM is also a ridiculously good plastic coating as well...probably the best we've ever used or tested.

[@findmeifyoucan]

@@Esotericdetail Thanks Todd. That is indeed impressive if it's still easier to apply than Mohs Evo. Appreciate the feedback!

[@HoosierDaddyDetailing]

Is the gloss levels as good or better than Mohs in your opinion?

[@arapaimagold8088]

ISM or Zipang gives you a true candy look finish. Where lights is slipping on the surface, instead of highly reflective. And the very first thing that you're gonna say is, "seriously?".

[@dlrulez619]

Can I use this on PPF?

[@smoking2strokes]

I just completed a Mohs EVO topped with Cancoat provided by Esoteric (Bulletproof setup). How does the ISM3.0 compare to the newer EVO lineup ?

[@Esotericdetail]

The Evo lineup is incredibly good, but ISM is a step up.

[@InnocentlyInsaneCreations]

I have to say, these products these guys pitch are high end. I love that. 2nd, is you guys are great at marketing to detailers. I appreciate that alot. 3rd, this makes chemical guys marketing look as bad as there products. Watered down... thx

[@johnnapoli3124]

If you have to do a large area in 2 separate passes, as you mention with a large hood, what is the best way to avoid high spots on the edge picking up where you left off as that edge has started drying? Also, can/should you use it on the glass engine hatch of an F430? ie, is it ok for glass and would the heat be a problem? One more question, would this be good to use on wheels? I have Ferrari 16m coated 5 spoke wheels. Thank you Todd, your videos are always helpful, informative and useful!

[@Esotericdetail]

As long as you're doing the overlap section one immediately after the other, you shouldn't run into any issues with high spots. Do not use on glass, and you'd want their Stance 3.0 on wheels as it's designed to handle more heat and chemicals. Hope this helps!

[@PorfyD23]

Good morning, and great video. Can you do multiple layers? Or is one good enough. Going to be buying a new truck so I'm thinking of ISM 3.0 or Gyeon Syncro Evo.

[@Esotericdetail]

Thank you. ISM doesn't like to layer on top of itself, but if you wanted to do multiple layers, put down Miyabi Coat first, and top it with ISM.

[@PorfyD23]

@@Esotericdetail Thank you very much Sir. Love your channel

[@kyleltg]

Any issue with machine polishing with Gyeon Primer + finishing pads, followed by liberal Prep wipe down prior to MYABI?

[@Esotericdetail]

Not sure I'd recommend that...

[@shawnvanhorn521]

I’m considering applying MIYABI then ISM on my new Abyss Grey truck. It does have some vinyl highlights on the hood, would that cause a problem? Also when applying the MIYABI do you need to avoid the plastic trim that you can cover with the ISM? Thanks.

[@Esotericdetail]

No problem on vinyl. Don't apply the Miyabi to the plastic...just use the ISM during that application for those areas.

[@daveainge9925]

When you say high humidity what is the percentage you base that on? I am in PA and anything 70% and above is considered high humidity. I like to apply my coatings in early morning to avoid the higher humidity levels in the afternoon like you talk about. I try to stay below 50% humidity when applying any coating. Kamikaze or Gyeon Pure, or MOHS.

[@Esotericdetail]

Try not to over-think it in terms of percentages. If it feels really humid, then you know it's not the best time to coat.

[@chrisr4012]

I know this works well on plastic. Is it also ok to use on rubber trim at the base of side windows or around the windshield or should I tape those off before applying.

[@Esotericdetail]

You can, but we usually do not unless it is stained and needs rejuvenated.

[@toddmartin2k]

I bought the ISM 3 and going to apply this weekend. Ok to use on wheels too? Tesla y black wheels. If not, please suggest.

[@Esotericdetail]

Thanks, Todd. You want Kamikaze Stance or Gyeon Rim for the wheels as it takes a completely different formulation. I hope this helps!

[@jotter995]

Hi, can you make a video for kamikaze Miyabi Graphene pro?? Is it possible to apply ISM on top of Miyabi graphene??

[@Esotericdetail]

We do not have that product here in the USA.

[@DrB_CU]

So I have used 1.0 and 2.0 on my vehicles over Miyabi. Both are a bit thick, is 3.0 that thick in application? Is it a PITA like 2.0 when it comes to setting up and removal? Is the depth of gloss the same as the others?

[@Esotericdetail]

As we talked about in the video, it's much easier on application, especially compared to 2.0. It's a thinner formula than 1.0 as well. Looks are very similar to what it has been known for.

[@aaronolsen8787]

Thanks for this video! On the Kamikaze website it says ISM 3.0 is layerable with ISM 3.0 again after 1~2 hours. Is that not true in your experience? Does ISM 3.0 not like to layer on itself just like the first two renditions of ISM? How does ISM 3.0 compare to the Kamikaze Miyabi Graphene Pro in Northern climates? Northern Canada with salt, ice, snow for 7 to 8 months of the year. I'm just wondering if the two component coatings like the miyabi graphene pro would do a lot better because of the catalyst, sort of like how 2k paints and clear coats are vastly superior to the 1k counter parts.

[@Esotericdetail]

We haven't tried to layer 3.0 on itself since the others never liked it. As for the other coating, we haven't had the opportunity to do any testing on it as of yet.

[@tonyl4888]

Hello. Great videos! Would this work better on a red metallic Tesla? It gives a warmer wax glow? 19:25

[@Esotericdetail]

I've always liked this on reds, and have done several of my own red cars in it!

[@tonyl4888]

@@Esotericdetail thank you!

[@jameslee7636]

Considering this product vs Gyeon coating. What if I’m in Arizona where it is a dry heat and no a/c in the garage (approx 95 deg). Can I apply this product? Will I have to remove it really quickly? Thanks in advance for your help!

[@Esotericdetail]

Just apply and remove quickly, and try to do it early in the morning if possible.

[@Dayman7467]

Can ISM 3.0 be applied to Suntek PPF? The latest version comes with some form of ceramic coating on it pre applied at the factory. I’m very interested in applying ISM to my car, but the entire front half has said PPF on it.

[@Esotericdetail]

It should, but you never fully know until you try it!

[@Scott144K]

On the Kamikaze site they say to use 2 coats on flat surfaces such as the hood or trunk. Is this after the 1-2 hour cure time? I didn't think ISM could bond to itself.

[@Esotericdetail]

I've always done just one layer of ISM on my personal cars and have always had stellar results. I'd just do one coat, then maintain with Overcoat.

[@boris3017]

I do have a ventilated garage. Can i still apply a ceramic coating? I have not seen any condensation at morning, since probably December-January.

[@Esotericdetail]

As long as you don't have condensation, then you should be good to go.

[@sdericmonty]

Tod would this be good on Jeep Wrangler fenders?

[@Esotericdetail]

It would be perfect for them! That's one of the great things about ISM...equally fantastic on both paint and plastic.

[@aounsflock2071]

Hi i did a miyabi sandwich today with zipang. i have ism 3.0 aswell i asked kamikaze about the sequence and they suggested i apply ism only on lower parts of my car as it has greater chemical resistance. can i apply ism on whole car?

[@Esotericdetail]

I wouldn't do that many layers of different coatings...

[@racey1979]

Hi Todd, the issue I have with coating my car is that I don't have a garage, is ISM suitable for use outside ? (Obviously checking weather conditions). Or would I be better choosing something like Gyeon Syncro which states is ok for outdoor use ? Thanks

[@alexgarcia7401]

I have done 2 cars outside but not in direct sunlight as it will flash way too fast. I use 4 easy ups to give me the shade I need. A Garage would be ideal but I have the same problem you have. For me lots of dust in my area so I get tiny scratches from the dust collecting during the curing/wipe off process. I have installed ISM 1.0 and it was great, lasted 3 years as a daily driver with proper maintenance. I have also installed miyabi 2.0(2 coats)with ISM 3.0(1 coat) and that was the best combo for me. Gloss is amazing with both together but you will also get great results with just ISM 3.0. by itself.

[@CMDRRustyDog]

Is it the case, that when wiping off ceramic coating (Gyeon MOHS in my case), that the first cloth(s) you wipe off with, have to be thrown away when done? Or can they be washed and re-used? And if so, what about the plusher 2nd wipe cloths?

[@Esotericdetail]

It's best practice to throw them both away.

[@CMDRRustyDog]

@@Esotericdetail Will do. Thank you for your response and for being so helpful. I'm binge-watching a lot of your content lately and learning so much more.

[@lukaspankratovas4676]

Do you use ISM or any other coating on your personal car or is it just regular spray of Cosmic spritz?

[@Esotericdetail]

My cars are always coated with Kamikaze and maintained with Cosmic Spritz.

[@michaeldavide7886]

@esotericdetail Can you apply ISM on expel PPF?

[@Esotericdetail]

Yes you can!

[@SilverBritches]

Will it work on a Camaro SS matte black hood? The one from the factory.

[@Esotericdetail]

Yes it will. That vinyl is very susceptible to staining so you most definitely want to coat it.

[@jayz3000]

@@Esotericdetail Can you use ISM on PPF Film like Xpel Stealth or the Clear Xpel?

[@Esotericdetail]

@@jayz3000 Yes.

[@jamesrichmond5919]

Does ICM 3.0 work on vinyl wraps

[@Esotericdetail]

Yes it does.

[@kabes-us]

Hey Todd, Which coating brands do you use on your personal vehicle?

[@Esotericdetail]

Sometimes Kamikaze, and sometimes Gyeon...

[@kabes-us]

@@Esotericdetail What would determine you using one over another?

[@ggcyclonerc2708]

Do you recomment this on a white paint?I have a brand new bmw x7 and i don’t know how to prep befofe coating.TY

[@Esotericdetail]

Works great on white paint. Just wash with something like Gyeon Bathe, decontaminate with Gyeon Iron, and thoroughly rinse. When dry, wipe down with Gyeon Prep, then you're ready to apply the coating. All of those products (and videos) can be found at www.esotericcarcare.com

[@ggcyclonerc2708]

@@Esotericdetail No polish or clay bar?Thank you again sir

[@Esotericdetail]

@@ggcyclonerc2708 Only if needed. NEVER clay without polishing, so if the surface is heavily contaminated, you'll need to clay and polish.

[@mueldaddy]

Is it better to always use Kamikaze base then ISM or can you just do ISM product.

[@Esotericdetail]

Miyabi / ISM is an upgrade level over ISM by itself, but ISM by itself is an incredibly good coating!

[@allendarie9349]

Can both products be applied over 3m or expel ppf.

[@Esotericdetail]

Yes they can. We do it all of the time.

[@AnderZ312]

Oh, you're a genuis. Understood.

[@theostoubos]

Can you apply to XPEL PPF ?

[@Esotericdetail]

Yes, we do it all of the time!

[@kyleltg]

Better to apply one or two layers of MIYABI underneath ISM?

[@Esotericdetail]

If you have time, then do 2. Just 1 layer underneath is still fantastic though.

[@tonyl4888]

Can we use gyeon products to was this?

[@Esotericdetail]

Yes, Gyeon Bathe would be a great option. www.esotericcarcare.com/gyeon-q2m-bathe/

[@Alf-M]

You say "SM doesn't like to layer on top of itself". What to do when the ISM eventually looses some effect? Do one have to polish it off before adding a new layer?

[@Esotericdetail]

That only applies when it's freshly applied. Over time the coating will start to wear, and as long as it's still in good shape (no swirls, scuffs, etc), you can simply do a thorough wash with decon, and reapply ISM.

[@aounsflock2071]

@@Esotericdetailwhat if you want to apply a different new coating? For example miyabi on old ism?

[@Vchauhan56]

How long do we let it sit before wiping off?

[@Esotericdetail]

One panel at a time. Apply to panel, then remove...no waiting in between.

[@Vchauhan56]

@@Esotericdetail so I apply it too the whole hood and then wipe right away or half the door and then wipe and then the other half? Same Ross for the door panels? Can this be applied too PPF?

[@therealevo77]

Todd, at the 7:25 mark you discourage the use of rinseless washes and encourage only ph neutral soaps for washing. Did you mean to say rinseless wash n wax products that contain protection which may interfere with the coatings properties? Or are you saying any and all RWs, even ones that are pure cleaners like ONR and Mckees N914?

[@Esotericdetail]

Many of those products you mention use polymers that stay behind on the surface, which do not have nearly as good of self-cleaning properties as the coating itself (or the maintenance products designed to go on top of them). Not a fan of rinseless washes...

[@ryeguy01]

That's interesting to hear. I have never heard of or observed polymers affecting hydrophobicity in any meaningful way. Plenty of people maintain ceramic coatings only using rinseless washes.

[@Esotericdetail]

@@ryeguy01 Watch this video from 4 years ago: kzbin.info/www/bejne/nYW9d2SkfdR0f8k

[@stevenpetouvis895]

I have used Over Coat on my Corvette that was coated with Miyabi and ISM. It look good, but I find that it lacks slickness. The microfiber towel seems to grab on the surface when I wipe off any dust on the car. Is there an alternative to Over Coat that gives some slickness and provides the protection you speak about in the video?

[@Esotericdetail]

Give Polishangel Cosmic Spritz a try...my personal favorite. www.esotericcarcare.com/polishangel-cosmic-spritz/

[@arapaimagold8088]

Well, you can change that mf towel with wool duster.

[@skylerjeter5211]

This vs the new Gyeon Evo?

[@Esotericdetail]

The new EVO line of coatings are fantastic, but this is going to be the premium choice.

[@skylerjeter5211]

@@Esotericdetail Awesome! Also, what is your go to coating removal towel?

[@claudiocerezo1644]

How many cars does a bottle covers?

[@Esotericdetail]

You should be able to get 2-3 applications out of one bottle.

[@claudiocerezo1644]

@@Esotericdetail I will def try on my next cars next month. How do you thing is gonna deal with UV rays and 90+ degrees days? I'm mobile and I don't if I should avoid sun exposure entirely or wipe it off quickly in small sections/panels.

[@Esotericdetail]

@@claudiocerezo1644 You don't want to apply in direct sunlight, particularly on hot days.

[@raymondpaterno2800]

439th like 😊 superb !

[@BiondosGarage]

Todd I’m struggling to understand how do you know when it’s probably bonded and it time to remove?