If you're looking for more detailed information on how to be better at paint correction and ceramic coating, then check out our new ONLINE training at: www.esotericdetail.com/education
@intrinsicfineautofinishing46602 жыл бұрын
I often use/recommend the two step combo of Miyabi and topped with ISM for my customers that can afford it. That works very well for my business. The ease of application is just amazing. Thanks for updating this product info Todd. Ken
@MortenCV972 жыл бұрын
Second this! Either Miyabi + ISM or Miyabi + Zipang combo is by far the best-selling coating combo I sell to my customers! With Miyabi + Zipang we get up to 3 years in harsh Norwegian climate without any form of re-threatment, only standard maintainance with over coat or anti age threatment 2-3 times a year! 😃
@peterly6548 ай бұрын
Can you use this combo on trim?
@intrinsicfineautofinishing46607 ай бұрын
@@peterly654 No you can only use ISM on plastic trim and so forth.
@InvertedLonestar2 жыл бұрын
Great to see another Miyabi video from you guys. With all the new stuff y’all have been reviewing (which is fine) I was beginning to worry that Miyabi was being replaced as the shop Favorite. Great video and info as always!! ~ Stephen@Lone Star Motoring
@Esotericdetail2 жыл бұрын
Thanks Stephen, and hope all is well.
@arrozconmgtow50262 жыл бұрын
This was SO informational. Esoteric fanboi, here and watching this finally lifted the veil of mystery regarding coatings. There's only one guy doing this in my entire county (officially as I suppose there are under the radar guys doing it) and he touts it as a straight up protective coating which now I know is largely fallacy. I'm definitely doing the full course but likely not until 2023. My vacation times didn't line up with it this year, sadly.
@Esotericdetail2 жыл бұрын
We look forward to seeing you in the future!
@timperez62482 жыл бұрын
I'm new to coatings. I've decided to try this on my old Prius to start, then to wife's AMG, and hopefully to my 992. Its not the cost savings as much as I like to tinker. Looks simple to apply once prepped. Thank you for an amazing channel
@Esotericdetail2 жыл бұрын
Thank you and glad you like the channel.
@TheRogueElement2 жыл бұрын
Thanks for this. I’ve followed you guys since those early days when you did the first Miyabi video! 😎
@Esotericdetail2 жыл бұрын
Thanks for hanging out with us for so long!
@christopherprice34532 жыл бұрын
Bringing my car in next month. Can't wait!
@Esotericdetail2 жыл бұрын
We look forward to it!
@lead-dog2 жыл бұрын
Excellent video Todd. Covered all your bases and then some. Loved the special effects on “smell”! A+ on thoroughness! Thanks.
@Esotericdetail2 жыл бұрын
Thanks...that was the brainchild of our videographer Wes!
@J1Z062 жыл бұрын
It looks very user friendly,very glossy,and,if it's good enough for the vehicles You put it on,then it's good enough for Me. Great video, Todd..loved the funny scenes! enjoy the weekend.
@Esotericdetail2 жыл бұрын
Thanks...that was all Wes' ideas!
@Schwabz332 жыл бұрын
Excellent video Todd
@Esotericdetail2 жыл бұрын
Thank you!
@grandfinish23642 жыл бұрын
Love this and esoteric!
@andymorgan7675 Жыл бұрын
I have to know….. what is that RED car behind you?? (Lots of awesome info here, and elsewhere on your channel. MUCH thanks Todd!)
@KevinAClassA2 жыл бұрын
Thank you for input and time, very much appreciate and value it Todd. Stay safe Kevin
@user-kv6cr8sv3f2 жыл бұрын
Appreciate the continued feedback and direction Todd. Being a customer for years, the quality and your presentation are always valued. So please now offer your opinion/direction here: I'm about to take delivery of a new Cadillac in black. What coating will bring out the deepest gloss and shine with GM paint? And which spray is suggested to after wash maintenance? Lastly, is there any issue applying a coating over an existing product such as Simonize Glass? Thanks, as usual.
@Esotericdetail2 жыл бұрын
Thank you. 2 layers of Miyabi Coat is great on plain black as it produces a really brilliant shine that accentuates the black finish. From there I like to maintain that with Cosmic Spritz from Polishangel. I know nothing of that product you're referring to, so I can't say with any accuracy if there would be any kind of bonding issues.
@user-kv6cr8sv3f2 жыл бұрын
@@Esotericdetail Thank you my friend!
@michaelo2535Ай бұрын
Kamikaze Collection is like the Louis Vuitton of detailing brands
@xu3fu6xup62 жыл бұрын
Thank you for such a detailed introduction, I have now ordered Miyabi and ISM from a local store and as you mentioned in the video, you do not recommend keeping the leftover materials for too long. But this is a huge problem for me because I am using it on my motorcycle and I will definitely not be able to use up a can no matter how many layers I put on. I would like to ask if I fill the can with helium or nitrogen before I seal it, will that extend its shelf life? Of course I would ice it in the fridge. Thanks again for your awesome video and looking forward to your professional advice!
@Esotericdetail2 жыл бұрын
I don't see where that would help...
@ricosebastian8651 Жыл бұрын
Sir,can you give me suggestion for the best looks coating,prefer gyeon pure,or miyabi combo with ISM ? Thank you
@Esotericdetail Жыл бұрын
It's not that simple of an answer. You also need to determine what kind of looks you're after, what you want with hydrophobic properties, slickness, ease of use, etc. Additionally, the color of the car helps dictate that as well. Your "best" looks will come from machine polishing...the coating is the icing on the cake.
@jameshayward7103 Жыл бұрын
Excellent video can’t wait to visit again
@canson19882 жыл бұрын
that shelby gt500 though 😍
@Esotericdetail2 жыл бұрын
Bad-ass car indeed.
@canson19882 жыл бұрын
@@Esotericdetail My dream car fur sure, wish the prize wasn't crazy high here in Sweden. i would have bought it otherwise. 150k USD here is just too much for a mustang in my opinion.
@1cstabach2 жыл бұрын
I really appreciate your videos but I just bought Gyeon Mohs because your video said you guys love it and use it all the time but this video basically says the same thing. I was wondering what is the best coating because it sounds like every coating you have is the best and it’s a little confusing. I have a couple Porsche’s and love to the diy detailing and want to do what is best. The Gyeon Mohs was awesome to install on my 997 but now I wonder if I should use Miyabi on my 996T instead?
@itsjustacrowd75572 жыл бұрын
Since you used the Mohs, do the Miyabi on the other and compare. It's all personal preference but you can't go wrong with either of them
@Esotericdetail2 жыл бұрын
"Best" is relative to what your wants and needs are. Just like in our video comparing Mohs and Pure...it's not pointing out which is better, it shows what they're capable of so you can decide which better fits your needs.
@ricardogutierrez7222 жыл бұрын
Title says the most used coating, not the best coating. I do not think their is a best coating , some coatings look better, others are more durable, other are more slick , others are more sticky, others are more user friendly . It really depends on whats more important to you. Kamikaze miyabi is a good coating , easy to use, durable , looks good but its more expensive compared to Mohs. Is there price difference worth it? , to be honest with you nope. But that is my opinion. Gyeon pure is what I went for but that is my personal preference. Mohs is still a great coating
@1Nevergone2 жыл бұрын
Here's the reality for too many won't admit. If a car is prepped and polished correctly, you're not going to be to tell any real difference between most of these coatings. The human eye can only detect so much gloss or shine before they start looking the same. I would bet just about anything that if you had 2 cars identical in color and prepped the same, you wouldn't be able to tell what had Mohs and what had Miyabi on it.
@blahz71522 жыл бұрын
@@1Nevergone What's your point? Not everyone buys a coating strictly for looks. There are many other factors such as durability, water behavior, ease of use etc. You're acting as if they are the same coatings when they actually very different 🤦♂️
@stevenpetouvis8952 жыл бұрын
I applied Miyabi Coat with a layer of ISM to my red Corvette about 4 years ago. It still looks great with an application of a maintenance after each wash. The car is garaged and in use about 7 months per year. When and how will I know that it’s time to reapply Miyabi and ISM? When it is time, what do I need to do to prep the surface before a new application?
@Esotericdetail2 жыл бұрын
Here are two videos that answer your questions: kzbin.info/www/bejne/pZXLloGcnbtoobc. kzbin.info/www/bejne/iZ6YpYSfaplmlbM
@DV_GirlsBasketball2 жыл бұрын
Love the video. You mentioned that the product is most effective on darker vehicles metallic vehicles, which of your coatings are coating systems would you recommend for pure white paint?
@Esotericdetail2 жыл бұрын
You need to ask yourself what type of looks you want with the paint. Some will provide more of a brilliant shine (Miyabi), while others will provide more of a warm, wet glow (ISM).
@chrisr40122 жыл бұрын
During the video Todd mentioned that Miyabi wouldn't be his first choice for metallic paints. My Porsche has black metallic paint. Would you recommend ISM or some other product over Miyabi? Ease of use is high on my priority list which is what drew me to Miyabi, but I also want my paint to look its best.
@tylerhayles2 жыл бұрын
Interesting video mate so from the sounds of things, on my candy red mercedes im best with ism or zipang for a deep enhanced rich gloss for the candy?
@Esotericdetail2 жыл бұрын
That's what I would use!
@bryanpieper2333 Жыл бұрын
Hey Todd. Do you have any experience with the Miyabi coat 2.0? I’ve used Miyabi as a base and Zipang as a top coat many times but was not aware there was a 2.0 version of Miyabi until just recently. Just curious to see if they would layer the same. Thanks.
@Esotericdetail Жыл бұрын
I have it on my personal car! It's a great revision, and works just as well (and probably better) as a base for Zipang and other Kamikaze-Collection coatings.
@bluukin4903 Жыл бұрын
I kind of have lots of ism left over, and you advised against doing a 2nd coat. Would it possible to coat the windows with ism? Or that’s highly advised against?
@Rick-oe1hc2 жыл бұрын
I don't have a garage in which to keep my car overnight. Though I can plan days when it won't be raining, I can't predict dew overnight. Is the slight amount of moisture from dew going to cause problems in the first 24 hours? In the past, after applying a coating, I have covered the car with soft blankets or towels and then covered it with a disposable plastic cover for the overnight. I am wondering if I can stop the covering part. Great video by the way!
@Esotericdetail2 жыл бұрын
That's a tough one as it's definitely not recommended. Perhaps if you had it coated by 8 in the morning, then applied a coating maintenance product (Kamikaze Overcoat or Cosmic Spritz from Polishangel) a few hours later, then maybe.
@XBOW832 жыл бұрын
Hello, did you even try Nanolex coating ? Si3d Max seems to have great spec
@Big_E_2472 жыл бұрын
What happens if you get it on plastic trim? Is ISM a better product if that might happen?
@Esotericdetail2 жыл бұрын
Just wipe it off...not really a big deal. Yes, ISM is the formula you want if you're going to use it for both paint and plastic, whereas Miyabi is just for paint.
@Schwabz33 Жыл бұрын
Topping with ISM? Will that give slickness to the paint?
@Esotericdetail Жыл бұрын
ISM has more slickness, yes.
@Payozo Жыл бұрын
What coat would you advice for BMW white non metallic!?
@Esotericdetail Жыл бұрын
White is neutral, and you can go either way with stellar results. Personally, I have Kamikaze ISM Coat on my white Jeep...
@mikewaters69802 жыл бұрын
Really helpful Video Todd. After watching this and some others of yours, thinking about Miyabi (2 coats) and ISM combo. For a car the size of the GT in this vid, how many sets of microfiber towels would you recommend I order pls?
@Esotericdetail2 жыл бұрын
Thank you. One set per coat should be all you need! So for your suggested process, 3 sets (6 towels) should suffice! You might want a few extra though in case you drop a towel in the process.
@mikewaters69802 жыл бұрын
@@Esotericdetail You rock Todd! Thank you for your fast reply mate.
@danielk93082 жыл бұрын
What did you use for / on that soft top on the bronco In the background?
Your guy answering the phone, recommended ISM 1.0 over Miyabi on our ‘21 Porsche Macan in Dolomite Silver. Was that the correct choice?
@Esotericdetail2 жыл бұрын
ISM is an upgrade over Miyabi.
@eliteowner1212 жыл бұрын
Hey Todd, can these be applied to single stage paint? Miyabi + zipang combo.
@Esotericdetail2 жыл бұрын
Yes they can...doesn't matter on the paint type.
@Shane11122 жыл бұрын
I like the look of the product but not being able to apply it to plastic is putting me off and makes it user unfriendly, so I can’t apply it to the plastic bumpers of my 911?
@Esotericdetail2 жыл бұрын
It's not user unfriendly in the least bit...otherwise we wouldn't be using it so much. If you're talking about painted bumpers, then you're OK...we're talking about textured, un-finished plastic (like cowlings around windshield wiper arms on modern cars).
@ballzdeep1017 Жыл бұрын
Will their be a 2.0 video?
@Esotericdetail Жыл бұрын
Eventually, yes...it's on the schedule. We like spending plenty of time with a product before producing a video.
@mueldaddy2 жыл бұрын
If I use this in Texas in the summer with our heat and humidity working in my garage about how long should I keep it on before the removal process begins?
@Esotericdetail2 жыл бұрын
It's best to do it in the morning if possible, and do just one panel at a time.
@tsifty12 жыл бұрын
Curious innocent question before deciding, which one is better between the Gyeon MOHS and Kamikaze Zipang or Miyabi? Durability and gloss on a white car?
@Esotericdetail2 жыл бұрын
My preference would be ISM v3.0 on white!
@Big_E_2472 жыл бұрын
Miyabi vs. Mohs Evo ?? Thoughts?
@Esotericdetail2 жыл бұрын
Different kinds of coatings depending on your ultimate wants and needs. What are you looking for out of a coating?
@seanhaus2 жыл бұрын
I think I remember from a video way back when that Kamikaze ISM actually could be applied to exterior trim and yield a pretty nice result. Does this hold true with Miyabi as well?
@Esotericdetail2 жыл бұрын
ISM is for both trim and paint, whereas Miyabi is just for paint.
@paul67492 жыл бұрын
Hi Todd, my car is a metallic paint in gunmetal grey. Would you recommend Myabi or ISM for this colour? My detailer doesn’t list ISM in their pricing options, but he does list Myabi and Zipang. Thanks
@Esotericdetail2 жыл бұрын
My preference would be ISM on that!!!
@danielcastorena30572 жыл бұрын
Question, i used Gyeon Prep before applying an si02 Ti02 coating and according to owner of coating Gyeon Prep is trash. Any issues with Gyeon Prep leaving residue behind???
@Esotericdetail2 жыл бұрын
So you're saying that the owner of a coating company is not recommending Prep? If that's the case, then I wonder why they would say that...other than it prevents them from selling another product?! I have never heard such a thing.
@spartanshadow132 жыл бұрын
Hi, will this be okay to be put over ppf? or ISM would work best? It is a white pearl car.
@Esotericdetail2 жыл бұрын
Both are fine over PPF, but you may find Miyabi a little easier to work with depending on the PPF brand and condition.
@biom92 жыл бұрын
Is there a big difference between topping Miyabi with ISM or Zipang? I don’t care about cost I’m DIY guy and just concerned about looks. Especially after spending the time to jewel the paint prior to coating. New ZL1 stuck in Michigan train yard. Thanks in advance.
@Esotericdetail2 жыл бұрын
You'd have to do quite a few cars in different colors before you could determine any differences in looks between those two combinations. Given that, the Zipang then requires less time and effort to apply than 2 coats of the combo.
@biom92 жыл бұрын
@@Esotericdetail thank you!
@williamclick97712 жыл бұрын
I have to ask you a question. Scotty Kilmer is a Professional mechanic he said that ceramic coating were bad for the paint of a car's paint that a car's paint needs to breathe. Is this true? I use polymer technology finishes on my paint. I'm a beginner detailer on my own car.
@JohnDoe-kn2hw2 жыл бұрын
Jesus christ, Scotty Kilmer still lives in the 1980s. Hes not even a decent mechanic, and abit outdated...
@darkwhorse2 жыл бұрын
Scotty Kilmer was relevant in the 70's-80's. His opinions and expertise is severely outdated and as a result putting out bad/dangerous opinions that are not grounded in data/science. Entertaining on occasion but not current
@Esotericdetail2 жыл бұрын
If you want good information on paint, then speak to a professional detailer. If you want to find out how to fix a car, speak to a mechanic. Coatings will not damage your paint...
@ludwigrotin58912 жыл бұрын
He's a mechanic, you don't go to a detailer to fix your engine do you? No, you go to a mechanic. Stop listening to what others have to say when it's not their line of work. He might be a good mechanic but he don't know anything about how to maintain your paint surface. He'll probably suggest you to paint your vehicle if he sees a bit of oxidization on it. A detailer will fix it and save you loads.
@georgehurst33672 жыл бұрын
Only watched Scotty one time and I'm not a fan, but based on how junky his shop/garage were in that video, I would say going within a half-mile of his place would be bad for your car's paint
@jimjimtiger2 жыл бұрын
Would you recommend this for Red Mist Metallic Tint Coat paint on C8?
@Esotericdetail2 жыл бұрын
I would prefer Kamikaze's ISM Coat for that color! www.esotericcarcare.com/kamikaze-ism-coat-v1-0-original-version/
@armoredsaint007 Жыл бұрын
Do you prefer this over the MOHS Evo and ISM 3.0?
@Esotericdetail Жыл бұрын
Both Mohs Evo and ISM are premium choices over Miyabi.
@PeteWalmsleyTheSpaceStation2 жыл бұрын
How does this compare to Gyeon Pure with Gyeon CanCoat as a topper? Seems to be a popular combination.
@Esotericdetail2 жыл бұрын
You're trying to compare a 2-layer coating with 2 different formulas to a 1 layer coating...not an equal comparison.
@PeteWalmsleyTheSpaceStation2 жыл бұрын
Fair call. How does it compare to Gyeon pure? Big Gyeon fan but you video has me tempted to try something new.
@nicholashinkle79292 жыл бұрын
@ESOTERIC Toyota Lunar Rock color...any coating suggestion that you'd recommend for best looks? Thanks Todd!
@Esotericdetail2 жыл бұрын
It depends on what YOU want, however if it were my car, I would use ISM Coat.
@nicholashinkle79292 жыл бұрын
@@Esotericdetail thanks Todd! And why would you choose ISM?
@Esotericdetail2 жыл бұрын
@@nicholashinkle7929 Because it looks fantastic on that color shade...
@nicholashinkle79292 жыл бұрын
@@Esotericdetail awesome thanks! Being in Oregon where winter is 98% rain, I assume you'd recommend ISM V1.0?
@jackdawson39832 жыл бұрын
How can you tell if any product that is left over has gone bad?
@Esotericdetail2 жыл бұрын
You'll know when you go to remove it and it doesn't come off very easily!
@peterfilice24452 жыл бұрын
Hi bought the item is it okay to put on plastic trims also or just the paint
@Esotericdetail2 жыл бұрын
It's designed just for paint.
@kenbergman41062 жыл бұрын
Hi Todd… after do a decontamination on my car plus a compound and polish, do I apply a wax then use the Miyabi coat on top of that wax as my finished product?
@Esotericdetail2 жыл бұрын
No. Wax has no place with coatings, either before or after. Your finish needs to be completely stripped clean before applying a coating, otherwise it won't bond well.
@kenbergman41062 жыл бұрын
@@Esotericdetail thank you Todd, wow such fast feed back really appreciate. Love your video’s so helpful.
@Esotericdetail2 жыл бұрын
@@kenbergman4106 My pleasure!
@ralphlauren60942 жыл бұрын
Any recommended rinseless wash for ceramic coated cars? Don't get me wrong, I still wash my car with water 2x a month. What to do if you get a bird dropping or any dirt that you want to spot clean? It is not just possible to wash the vehicle every time there is some bug or poop. I cannot stand looking at that dirt and waiting for a week or two to wash my car with water. 😅
@Esotericdetail2 жыл бұрын
A little different subject, but same methodology: kzbin.info/www/bejne/qmexiqKFfsunl5Y
@ralphlauren60942 жыл бұрын
@@Esotericdetail I am confused whether to go Zipang Miyabi combo or a ceramic coat dedicated for ppf. I want the best! I have a car that has ppf. Please advise.
@Esotericdetail2 жыл бұрын
@@ralphlauren6094 Zipang is still going to be your highest level, regardless of PPF.
@ralphlauren60942 жыл бұрын
@@Esotericdetail So sad that shops near me don't even know this product.. even the best shops in New York 😔.. standards are low. still looking for a shop that caters to people who are looking for perfection/absolute best
@Esotericdetail2 жыл бұрын
@@ralphlauren6094 Just remember, we regularly get cars shipped in from all around the country! :)
@pooneyheat2 жыл бұрын
What's the shelf life of an unopened bottle of Miyabi Coat?
@Esotericdetail2 жыл бұрын
Probably 6 months or so to be safe.
@Matthew37532 жыл бұрын
Is the coating good for headlights and tail lights?
@Esotericdetail2 жыл бұрын
You can use it on those areas as well.
@kabes-us2 жыл бұрын
How well does it perform against water spots? Looking for a coating that resist that, as one my cars is outside.
@Esotericdetail2 жыл бұрын
I don't know of a single coating that's going to prevent water spots. Since it's outside all of the time, it's even more important for you to maintain properly and regularly with something like Kamikaze Overcoat or Polishangel Cosmic Spritz.
@kabes-us2 жыл бұрын
@@Esotericdetail Thanks. Allegedly there are coatings that based on their chemical make up, are less susceptible to outside elements including water spotting due to rain and/or hose water. This is largely based on their water shedding behavior. My curiosity was to better understand how this product reacts under these conditions vs others in the marketplace.
@Esotericdetail2 жыл бұрын
@@kabes-us That kind of messaging is usually coming from the same companies that claim scratch resistance, super hardness, and crazy-long durability claims...none of which are real. Coatings are there to provide long-term good looks, and ease of maintenance.
@1stfrompuertorico5682 жыл бұрын
2nd
@lehawkinsjr2 жыл бұрын
I fully understand the cost of towels is not that much but are you concerned about the amount of one use towels detailers are sending to the landfills?