The Top 3 Ways to Paint a Door

  Рет қаралды 16,672

Super Vassar Brothers

Super Vassar Brothers

Күн бұрын

Пікірлер: 37
@craftyblogger
@craftyblogger 7 ай бұрын
I’m actually enjoying painting interior doors for my home & grateful for your video tips. SW Emerald Trim enamel is awesome. Makes it look like I know what I’m doing- smoooooth!!!!😃
@SuperVassarBrothers
@SuperVassarBrothers 7 ай бұрын
Nice!! I’m glad you’ve found the videos helpful! 🫡
@number1pappy
@number1pappy Жыл бұрын
I finally got to use the corana brush you recommended to me. I like it alot! I was using a Premier brand montauk brush that is considered a firm brush. However i was getting brush marks even with benjamin moore advance unless i used floetrol leveling fluid as an additive. I used the corana vegas with advance without floetrol and it layed down really smooth without any brush marks! Im extremely happy! I unfortunately wasnt aware of how the differences in brushes as far as how soft or firm would effect the outcome. Im still learning but atleast i seem to be learning the correct way. My painting results are getting better with time. Thank you for all the advice! 😊
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
That’s awesome my dude! I was also using a Corona Vegas with advance this week. It’s a solid combo 🤙
@hadleymusselman9947
@hadleymusselman9947 3 ай бұрын
Hello - Loving all your videos! I have not done very much painting in my 38 years and I'm about to embark on re-painting ALL the ceilings, walls, trim (interior and exterior), doors, kitchen cabinets, and in some places the wood floors of my fairly dirty 119 years old, 750 sq ft house. You've done a few videos on doors, which I plan to use for painting my cabinets. Would you please consider posting a video on painting kitchen cabinets specifically? Also, have you ever re-painted old metal kitchen cabinets in gloss or hi-gloss? What about painting ugly stained and sealed dirty honey oak discount home-improvement type cabinets that have never been painted before? Have you done a kinda-rotted-at-the-bottom garage door? A-bit-crumbly exterior trim that you don't have the cash to replace and want to prevent from totally rotting out until you do have the money/time to replace it? I'm pregnant with twins (!!) and trying to get most of this done before it gets too cold to paint in MN in October. Any and all help will be greatly appreciated. Thank you for your straightforward and entertaining videos!
@SuperVassarBrothers
@SuperVassarBrothers 3 ай бұрын
Thanks for watching and I'm glad you've been enjoying the videos. Sounds like you've got quite a set of projects ahead of you! Ok so here we go with some answers to your questions. For the cabinets, I'd recommend priming them first with something like Fresh Start primer from Benjamin Moore. I did a video recently on that product and it's a great primer. Make sure you sand the surfaces of the cabinets first before you prime. I'd go with 150 grit. Then you can use a hybrid trim paint like Emerald Urethane Trim Enamel or Advance from Benjamin Moore. Both are solid options. As far as the crumbling exterior or rotted wood. You can patch those areas with MH ready patch. That'll get you patched through until you can get the wood replaced. I'd also recommend clicking this link that I'll put in this response. You'll get our PDF of recommended products, but more importantly you'll get on our email list. We are about to launch our DIY course and service that is geared towards helping DIYers paint and maintain their homes and I can better address your questions inside of that course. Also, congratulations on your twins!! I hope everything goes smoothly with that. My wife and I are expecting our second any day now. Here's the link: www.paintyourhomenow.com/interior-paint-buyingguide
@francesj.jenson6698
@francesj.jenson6698 Жыл бұрын
Great info, thx!
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
You are most welcome 🫡
@xbadandy182x
@xbadandy182x Жыл бұрын
Worth it to use Floetrol to get additional working time? Was thinking of rolling it on super thick then using a brush after while its still wet to kinda flatten out that stipple
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
It depends on the product you’re using and your own speed. The method you’re describing is a common way to finish doors. Roll it on and then back brush it. If the door has a grain pattern to it, then I still prefer to just use a brush. But give it a go and see how it works for you.
@xbadandy182x
@xbadandy182x Жыл бұрын
@@SuperVassarBrothers Makes sense. Sounds good. My builder in our home sprayed all the flat paneled doors with SW Solo Semi Gloss. Ill probably slowly transition everything over to Emerald Urethane Trim as I am fixing imperfections and repainting. Love the channel. Thanks for always replying. Id definitely expect your YT Channel to grow substantially over time if you continue like this. Cheers.
@waynekeizer5720
@waynekeizer5720 Жыл бұрын
Would be interested to see a video of you breaking down the corona brush line. Which brushes for what uses. I’ve used Wooster, Purdy and some other general paint store brand brushes and I never really liked any of them. I’ve always seen corona brushes at my local paint supply but kinda found it confusing to know what one to pick for what senerio. I saw in one of your other videos you said you really liked corona Cortez brush, so I went and bought it and man it was life changing.
@TafurLLC
@TafurLLC Жыл бұрын
I never heard of Corona, they don't have it in sherwin williams or Benjamin moore.. im going to check it out online
@TafurLLC
@TafurLLC Жыл бұрын
Thanks for the video, I can use it for my new guys. I subscribed 😊
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
I’m glad it was helpful!
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
Occasionally you can find them on Amazon for a decent price but Benjamin Moore retailers are where they are most commonly found
@SuperVassarBrothers
@SuperVassarBrothers Жыл бұрын
You’ve convinced me good sir. I’ll be working on that video shortly. Thank you for the input!
@jeredmattson9
@jeredmattson9 23 күн бұрын
what are your thoughts on a clear coat over paint on exterior door?
@SuperVassarBrothers
@SuperVassarBrothers 23 күн бұрын
I’ve never done it other than polyurethaning over a stained door. If you use a good exterior paint like Moorglo Soft Gloss from Benjamin Moore then it’s unnecessary.
@javahsmith2886
@javahsmith2886 6 ай бұрын
Ok! I m here going over hundreds of ways to paint a front door and it can be mind blowing, it's a new door with glass insert, of cause with a smooth finish, I started to roll the paint on and did not like that either, so my question to you is there a way I can use spray can to get that nice finish and do you have a video on that as well? I am just a home owner who love to things around the home. thanks.
@SuperVassarBrothers
@SuperVassarBrothers 6 ай бұрын
I would not recommend using spray paint to paint you're front door. In my experience you're better off hand brushing a front door particularly if you're not experienced using a paint sprayer. Here's a video that you may find useful in that particular endeavor: kzbin.info/www/bejne/aJ2Vh5KrpLufd6s
@javahsmith2886
@javahsmith2886 6 ай бұрын
@@SuperVassarBrothers Thanks for getting back to me on this matter, I will try and keep trying until I get what I am looking for without having to buy a spray gun that I will never use again. thanks once again.
@porphyrio1
@porphyrio1 5 ай бұрын
Thank you for your instructions. A question that I have is for MDF doors with grain surfaces like the ones you showed at 5:14 How do you prepare the door for painting when going from what seems to be oil based gloss paint (rubbing methylated spirits/ isopropanol alcohol on the surface did not remove any paint) to water based gloss paint? I have an oil based primer on hand but what about the sanding? I don't see how you can sand such a surface without loosing the grain pattern. Thank you.
@SuperVassarBrothers
@SuperVassarBrothers 5 ай бұрын
You can definitely sand doors with that grain pattern and not lose the pattern. Hand sand it with 150 grit sandpaper to scuff it up a bit. After that you have a few options. A lot of the hybrids like emerald urethane trim enamel or Advance from Benny Moore will grip to oil. If you’re using an acrylic then you may need to prime it with a bonding primer. There are some oil options like cover stain and shellac based like BIN would also work. Recently we’ve been having a lot of success with fresh start from Benjamin Moore. It’s 100% acrylic but it bonds with most surfaces.
@porphyrio1
@porphyrio1 5 ай бұрын
@@SuperVassarBrothers Hey, thanks for the reply. Appreciate it. I've previously tried sanding already in a small area of the door, it's difficult to see but I did not see the valleys getting scuffed, only the hills. After your post I will try again but maybe with a sanding sponge. "Scuff it up a bit" is the operative word to understand through experience I suppose🤔 Thanks again.
@AllenLorton
@AllenLorton 8 ай бұрын
Do you ever spray trim/doors or do you exclusively paint trim and doors with brush/roller? Do you find that most clients are preferring brushed over sprayed?
@SuperVassarBrothers
@SuperVassarBrothers 8 ай бұрын
I have sprayed a fair amount, but for the work we do we use mostly brush and roller. It’s less about what the clients prefer and more about what level of finish you can produce with each method. You can do a good or bad job with brush and roller and you can do a good or bad job with a sprayer
@vanessarademeyer9389
@vanessarademeyer9389 4 ай бұрын
Good morning I hope that you are able to advise me I am a wheelchair user and I have made marks on the bathroom door and need to paint repair it before moving out the door has a grain not sure what type of paint to use
@SuperVassarBrothers
@SuperVassarBrothers 4 ай бұрын
Usually doors are painted with a semi-gloss trim paint. Those are quite common. You may want to go with an acrylic because they're easy to work with. Duration Semi-gloss or Emerald Semi-gloss are good options from Sherwin Williams. If the door is white, then you can just use a the stock white from whatever paint manufacturer you go with. As far as the marks go, you can try scrubbing them with soap and water to see if you can get them off or part of the way off. Then I'd suggest painting the whole door. That's my take on it without seeing it in person. Good luck with your project!
@vanessarademeyer9389
@vanessarademeyer9389 4 ай бұрын
@@SuperVassarBrothers thank you for replying much appreciated 🙏🌻💕
@AllenLorton
@AllenLorton 8 ай бұрын
If you couldn't find a Corona Vegas brush, which brush would you buy? I cannot buy Corona brushes locally and don't want to wait for shipping.
@SuperVassarBrothers
@SuperVassarBrothers 8 ай бұрын
I’d probably get a Wooster or a purdy
@johnwhite2576
@johnwhite2576 2 ай бұрын
Do you pint the tops and bottoms of interior doors ?? Esp on new build
@SuperVassarBrothers
@SuperVassarBrothers 2 ай бұрын
Not usually.
@zee9er
@zee9er 5 ай бұрын
What kinda roller do you recommend from Home Depot or Lowe’s on an exterior door using sw emerald urethane trim enamel
@SuperVassarBrothers
@SuperVassarBrothers 5 ай бұрын
You can use a 1/4 inch nap Wooster, or you can get some smaller wizzer rollers that use the small frames. Both work well for doors.
How to Paint a Flat Panel Door | 3 Easy Steps
12:47
Super Vassar Brothers
Рет қаралды 130 М.
Don't Remove It! Paint Your Front Door (Beginners Guide)
10:45
Super Vassar Brothers
Рет қаралды 136 М.
didn't manage to catch the ball #tiktok
00:19
Анастасия Тарасова
Рет қаралды 33 МЛН
MY HEIGHT vs MrBEAST CREW 🙈📏
00:22
Celine Dept
Рет қаралды 46 МЛН
Mom had to stand up for the whole family!❤️😍😁
00:39
Сюрприз для Златы на день рождения
00:10
Victoria Portfolio
Рет қаралды 2,1 МЛН
How to prepare and paint a door - Using a Purdy roller and Dulux paint
19:10
HOLY GRAIL of ROLLERS ✨ smooth finish no sprayer
10:09
Black Sheep House
Рет қаралды 158 М.
BEST Way To Paint Doors.  AIRLESS SPRAYING.
12:59
Paint Life TV
Рет қаралды 254 М.
How to Paint a Panel Door the Professional Way
17:11
Aubrey's Absolute Decorating
Рет қаралды 531 М.
How to paint walls. How to paint a wall using a roller. Best Technique.
9:55
How to Paint a Door (quickly!)
13:10
Bobby Tre Painting
Рет қаралды 1,5 МЛН
How To Paint A Room | DIY For Beginners
25:07
Home RenoVision DIY
Рет қаралды 7 МЛН
Want to paint your house 10 times faster?
11:54
Invincible Painting Basics
Рет қаралды 912 М.
didn't manage to catch the ball #tiktok
00:19
Анастасия Тарасова
Рет қаралды 33 МЛН