Great video, thank you for the straight forward explainer 👍
@fabian32652 ай бұрын
I love that you get 4 channels simultaneously 🥰
@adamtalkstech2 ай бұрын
One of the best features!
@Stash_Studio7 ай бұрын
I don't even own a Sony but now I'm a XLR top handle pro. Great video!
@adamtalkstech7 ай бұрын
Thanks for watching!! They’re pretty useful to have.
@starttofinishmediaco.25202 ай бұрын
Man i wish i had watched this video sooner lol thank you for the in depth breakdown !
@adamtalkstech2 ай бұрын
You are welcome! Better late than never :)
@McDoogMedia2 ай бұрын
This should be standard viewing - great breakdown!!!
@adamtalkstechАй бұрын
Thank you! Very kind of you
@dazedhavoc4 ай бұрын
Thank you!
@adamtalkstech4 ай бұрын
You bet!
@luisdeltoro14 ай бұрын
Thank mate, very useful!
@adamtalkstech4 ай бұрын
Glad it helped!!
@VicMdrz2 ай бұрын
tnks
@phillgriffith4 ай бұрын
Great video, I have been using mine incorrectly for years - so THANKS for the concise, useful video - brilliant!
@adamtalkstech26 күн бұрын
Glad to help!
@apsaravideo26 күн бұрын
I want to plug sound from a mixer. I see at around 3:55 I have to choose Line Input level. What kind of cable do I use from the mixer ? XLR, 1/4 inch or RCA? Do I plug OUT or IN from the mixer ? Please post if anybody knows. Thank you!
@adamtalkstech26 күн бұрын
Out from mixer. Probably line level. You can use xlr or 1/4. I don’t recommend using the rca unless it’s all that the mixer has.
@ex_centric29332 ай бұрын
The audio module is detachable from the handle itself? Just to use the top handle without the audio in certain situations. Thank you
@adamtalkstech2 ай бұрын
No it is permanently attached but some people mod it and remove it permanently.
@ex_centric29332 ай бұрын
@@adamtalkstech thanks, I’ll keep an eye to these mods
@cristianmateo18692 ай бұрын
There is another model, xlr-k3m, this one has no handle, just the interface.
@Farscape0017 ай бұрын
Nice video. Is there a way to combine both Input 1 & Input 2 audio if using 2 separate mic's? When Input Select is set to IN1+IN2, input 1 only has audio on the left channel and input 2 only has audio on the right channel. If Input Select is set to IN1, input 1 plays on both left and right channels, but input 2 has no audio.
@adamtalkstech7 ай бұрын
You have to do that in post. If you’re on Final Cut change it to 4 mono or dual mono.
@denisfcporto8 күн бұрын
A stupid question. Can this record by it self like a zoom? Even when the camera isn't recoding.
@adamtalkstech8 күн бұрын
No, have to use the camera
@kingmuhu4 ай бұрын
Can some1 please explain why my level knob on channel 1 doesnt change the gain, but makes it pan left or right...
@kaanozel37684 ай бұрын
Brother Just make Auto!
@imjohan2Ай бұрын
Do you have a recommendation on what microphone to go with the handle? I just got my fx30 with the handle, and since it is my first vidcam I am a bit lost! 😅
@adamtalkstech26 күн бұрын
I used the audio technica at875r with mine
@benwoodbridge21342 ай бұрын
Great video thanks. I'm moving from the XLR-K3M to this just because of the handle part. But i did notice this doesn't have the digital/analog switch at the back where the input select switch is. and when the H1 is plugged in, I no longer get the digital notification on my camera. so does this mean that the H1 is only an analog audio signal?
@adamtalkstech2 ай бұрын
This one is digital only.
@dazedhavoc4 ай бұрын
Can I use Imput 1 and 3 at the same time? When I try it doesn't seem to work.
@dazedhavoc4 ай бұрын
Nevermind, I think I figured it out!!
@apsaravideo6 ай бұрын
Hi Adam, question on choosing the INPUT when I watch your clip at around 4:00 timeframe. I record live concert events with the stereo mic (Audio-Technica AT 8022), recorded on-air plugged to 3.5mm on a Canon camcorder. This mic is powered by a single AA battery. I love this mic. It can be converted to XLR. I'm quitting my old camcorder and upgrading to either FX30 or FX3. I still want to use this mic. What INPUT should I choose ? LINE, MIC or MIC+48 ? Love your watching your clips. Thank you for what you do!
@adamtalkstech6 ай бұрын
It should be +48v but I’m not sure how that works with that breakout cable you were talking about.
@apsaravideo6 ай бұрын
@@adamtalkstech 🤩Thank you very much for your response. I'll be trying out. If not working, i'll connect to the 1/8" input 3.
@fabian32652 ай бұрын
Since its already powered by a battery it should be mic, not 48v
@apsaravideo2 ай бұрын
@@fabian3265 Thank you very much for your response🤩 !
@greghuff17752 ай бұрын
Quick Question, do you know what settings I need so I can hear Channel 1 and 2 when Im using 2 Sennheiser mics on a Sony FX-3? I can only hear whats coming into channell 1 withmy headphones while recording. Thanks and great video!
@adamtalkstech2 ай бұрын
Check your headphone output settings on the camera and I think there's a spot you can adjust which channels. it may always do 1 to left and 2 to right though
@makemydayfilmsportugal2 ай бұрын
hello. Thanks for the video. Im using a shotgun mic and i put the mic+48v on Input 1. But for my rode wireless go, should i put on line, mic or mic+48v? thanks
@adamtalkstech2 ай бұрын
I believe the rode is mic level
@fabian32652 ай бұрын
Since its already after a gain, you should use level. Mic boost the signal but you already do that in your transmitter and and receiver.
@AylettMedia4 ай бұрын
Where can I get the spacers from?
@fluff19914 ай бұрын
amazon bro. there called rubber spacer or rubber sleeves
@lboogie47965 ай бұрын
Ive noticed my camera battery drains way faster when using the audio top handle. Is there any way to prevent the audio handle from using the camera battery especially since the Sennheiser shotgun mic i use has a battery in it already??
@adamtalkstech5 ай бұрын
You could turn phantom power off, but I'm not sure how much that would help. I've got a video coming out soon on the Neewer PS099E Battery and Smallrig V Mount Rig that I'v been using lately to help me not have to worry about battery drain.