The Victorinox Cyber Tool Lite - The Best Victorinox Knife for Techies

[@teutatix]

I‘m working in IT for over 20 years. I have the Cybertool since 2003. I love it. In the dayI worked in customer service it really was my EDC, I used it everyday. Thx for you videos!

[@JonGadget]

great to hear - thank you.

[@Morpheus451]

Good review, just one correction - none of the bits are Pozidriv. All three are Phillips (0, 1 and 2). For some reason Victorinox describes the two smaller ones on their website as “Bit Phillips 0/1 (Pozidriv)”, possibly because you can use a Phillips bit with a Pozidriv screw in a pinch. I own the Cyber Tool M, which to me is the best of the variants. I do not need the saw and file, which would just make the knife unnecessarily big and heavy. And I do not want electronics on my knives either; I would worry about cleaning them with water, and I always carry a better flashlight with me anyway. I would like the magnifying glass, but in the end the camera on my phone does an even better job.

[@JonGadget]

Great feedback Morpheus - and thanks for the correction, I was going by the description in the provided leaflet. Also good point re phone camera as magnifier. I am sure other readers will find this useful.

[@paulricketts7449]

Hi Jon, just wanted to say how much I appreciate your reviews and the hard work you put into making them informative, interesting and the kind way you deliver them. I must say after watching many many reviews you are one of the best. Please keep the reviews coming.

[@JonGadget]

Thank you Paul - that is really kind of you to say and I really appreciate the feedback. Lots more to come.

[@arbitrarynightjar2788]

I recently picked up the cybertool m and I'm loving it so far! Thank you for this video.

[@JonGadget]

great to hear - it's a great tool

[@arbitrarynightjar2788]

@@JonGadget yes it has been super handy. I didn't realize they existed until I watched your video so thank you for opening my eyes.

[@MichaelB2L]

Swiftly becoming Victorinox’s best customer 😉

[@JonGadget]

😂

[@xst-k6]

@@JonGadget you are clearly passionate about this, you should design & build your own multi-tool!😀

[@sam-515]

@@xst-k6 absolutely right 👍🏻

[@beverlymarsh233]

As an arcade manager, this has been perfect for me. There's really not much to say it's got a lot of things I need 9/10 if I'm walking around the arcade and I see an issue I've already got the tool in my pocket I don't need to run to the office and dig through the tool box.i even use the tiny screw driver to set dip switches.

[@grovesy333]

How often do you use it everyday ?

[@actionarslan]

Where’s the arcade? We’re coming over!

[@domxem5551]

One of the best reviewers in YT. Great tips and useful advice all the time.

[@digitalchimpuk]

I only discovered about the pin a couple of months ago on my Victorinox Camping, didn't have one but did have the space for one. Purchased 2 pins, 1 spare, and can say its probably one of the most useful tools on any pocket knife! Love your reviews, keep up the good work!

[@jinxjones5497]

If im honest SAKs are why i came to the channel, them and Olight torches. I stayed for an English accent and UK £ pricing and the concise reviews. I have titanium scales on my cybertool but as hinted at above i always have a torch so i don't have any lite models. It's probably as a collector of well over a 100 SAKs in my top 5 Swiss Army Knife models

[@peddypeoples941]

I love this victorinox, very nice for pc assembly and i even once opened a xbox with it. Has been very handy over the years. Lost one bit and recently broke one, replacements are a bit expensive.

[@JonGadget]

thanks for the feedback 👍

[@Bananeurysm]

I’d like to point out that the eyeglass driver has a 1/4” hex handle and can be fitted to a standard 1/4” bit driver for a better grip. Great vids, btw.

[@henryjtodd]

…this can’t be true, surely; how have I never noticed this? Update: it’s true! 😂

[@207sport]

Proud owner of Swisschamp, Now in LOVE with Cybertool L

[@DaveHoran]

Great review! I've had the original version from 2000 received as a gift. I've used it consistently for over 20 years and it never disappoints. That said, some newer versions you've shown have me looking online for an upgrade!

[@JonGadget]

thanks for the feedback Dave

[@cassiopantoja]

Thank you Jon. So cool and so helpful are your videos. Please keep doing it!

[@gamingguru2k6]

I like the can opener, and bottler opener. It's my preferred edc sak. It has everything I could need.

[@dougbotimer8005]

Well, I don’t really have any interest in this tool, but love watching your reviews. I learn something useful every time. This was no exception. Didn’t know about the pin. And I haven’t tried the Victorinox hook, but the similar hook on my Gerber Travel Dime was invaluable opening a broken backpack zipper.

[@JonGadget]

Thanks Doug - good to know.

[@ELaster1]

Had a great time watching you, as always 😊 I really like it when you show an actual use of the tools, ad you have done in some of your other multi-tools review. I think it adds a lot 👍 Have a great weekend, Sir

[@JonGadget]

Thanks for the feedback Eyal - yes, I am including more in-use footage with each video - great to hear you like it.

[@daves6851]

Daily living: Can openers are not for the field anymore. They are for people like me who will eat fruit and veggies from the can when on the road (cheap) . Few people carry canned foods to the field anymore with all the other container options. Toothpick is also necessary for eating away from home (the apple skin stuck between teeth ha). The scissors is the only tool I use on my fingernails since a file is not needed after unlike when I used clippers. The tweezers works better than any other tweezers on tiny slivers. The magnifying lens for seeing the micro slivers and reading fine print. So I beg to differ on any of those tools being for field use but rather for those of us that spend our day away from home without a travel bag with toiletries and such. I enjoy your reviews and hope that when you say something is not needed on a particular model that it is regarding you and your life or situation. Afterall, for most of us MacGyver types, the multi took is for multi situations :)

[@vladimirmach6145]

I prefer the Swisschamp XLT. It's the only Victorinox that really embodies the full complete toolset. No compromise.

[@RobboElRobbo]

no compromise? you can hardly hold it to actually use a bunch of the tools lol

[@larsneely4640]

Also, an empty screwdriver becomes a 5mm hex driver, for motherboard standoffs and d-sub screws. A real life saver in the IT field!

[@droog62]

As a sysadmin who used to be in charge of deploying mobile phones for users, the pin is a very valuable tool to swap sim cards because everyone always loses the ones that come with their phones.

[@miguelmal]

Big fan of your victorinox reviews, and your videos in general, keep it up!

[@JonGadget]

🙏

[@Mu-podcast]

My Swiss Champ with black scales is apparently an old fogey in the lineup. No parcel hook on the back, and no opening for a pin. It has the gray plastic frame for the magnifying glass too. I've been carrying it for many years. Until I started watching these videos, I didn't even realize they added things like the pin and parcel hook.

[@JonGadget]

Thanks for sharing. Interesting stuff.

[@princeofdenmark9142]

Great review, had one for years, gets used every single day. The "M". If I lost it I'd buy another within a week. I would say having lost one of the bits, I had a mare finding a replacement, I paid £15 (not £3!) and it came all the way from France. Hunted high and low. (Never used the can opener :) )

[@jhacoltak9169]

Thank you again for your video, as always its very interesting. Can’t wait for the next one!. Jo from Québec.

[@JonGadget]

Thank you Jo - appreciated.

[@WaldoNevada]

Wonderful review! I have been binging quite a few of your videos today and subscribed. I edc a Cyber Tool M with custom scales that have a ruler and an extra slot which allows for the addition of a firefly ferro rod without having to remove the tooth pick. I find the Cyber Tool M offers a versatile tool-set while remaining significantly more pocket friendly than the Cybertool L or Cybertool Lite. While I also own a Cyber Tool Lite, it mostly stays in the drawer because I edc an Olight baton and my cell phone has a built in magnifier.

[@JonGadget]

great feedback - thanks for sharing and for the kind words

[@peterculkin811]

Hi Jonathan, I always enjoy your reviews. I was a computer tech, back in the day and I have owned, used and abused my original blue scaled CyberTool (now known as CyberTool M) for the past 20 years. I personally don't need the magnifying glass and light, but would like the saw, file and chisel that also come on the CyberTool L, however, I don't like the placement of the tools on the L. The bit driver is way off centre on that model. You say that for a tech tool, you don't need the saw and file, or can opener for that matter. What I would like though, is a tool that covers tech, urban and outdoor, all in one SAK. I have purchased a Ranger, which I plan to remove the saw and file layers from, thus downgrading it into a climber, which I'll probably never use. I will then add these layers to my Cyber M, turning into an L special, with the bit driver centred. I already have the required 2.2mm and 2.5mm brass rods to make the new pivots. To me, this will be the ultimate SAK. It will miss the fish de-scaler and 3D Phillips of the Champ and the aforementioned mag-glass and torch of both Champ and Cyber L, but none of those are losses to me, compared to having bit driver, file, saw and chisel. Each to their own.

[@JonGadget]

great feedback Peter - sounds like you have a good plan for your perfect Vic 👍

[@Ninja-Alinja]

I’ve used the cyber M since it came out as my prime EDC. I have a dozen other knives, but nothing else like it. And yes, electronics engineer with lots of field work

[@rhubarbrhino]

I actually get excited really when I see a new video. Love the channel!

[@JonGadget]

Thank you 😊

[@cebolinha-oliginal]

Great review, great scenario and light, great sound and great content. Thank you very much, and keep up the great work! Subscribed.

[@JonGadget]

Thank you Michael and thanks also for the Sub 🙏

[@artemtrofymenko5969]

Great review Jon! Fantastic job on reviewing the whole line of Cybertools. L model is the one for me and after this review my shopping basket just got heavier ) it pretty much minimises my current setup into a single tool. Now I got the following tools in my EDC: Knipex Cobra XS (that one is preps irreplaceable) BIG idea design Bit Bar Tec Accessories pocket Pry TwoSun Ti Pen Vix Compact One thing I'd do to a Cybertool L is switch translucent scales to titanium ones and add a Ti pocket clip from TecAccessories and be jolly and happy ever after. As a knifenut I have a question - can you get a T6 bit as well from Victorinox to add/substitute to the setup? Thanks again. Great job!

[@JonGadget]

great to hear Artem - sounds ideal - not sure about T6 - can only find spares of current bits but worth shopping around

[@dalecarr5445]

Great review as always. I’ll admit to being somewhat of a collector as I have all of the Cybertool models. My preference is the large which used to be the Cybertool 41. I actually prefer over the Swisschamp because many of my other knives and gear use torx screws and it’s great to be able to tighten and loosen them in the field. By the way, the Cybertool L/41 has the backside tools like the Swisschamp so there is that plus as well. Love your videos and can’t wait for the next one.

[@JonGadget]

great feedback thanks Dale -also thanks for kind comment

[@egonmilanowski]

I had a Cybertool 41, now called an L, for quite some time and I loved it. Eventually I got rid of it because I never used the saw or file, but the Lite might be the way to go. I hate the button cell batteries, but they are readily available. Makes me wonder if they couldn't be replaced with some type of rechargeable unit from a keychain flashlight.

[@negolfman]

You could clip a stream lite nano to the keychain too.

[@ChristianW1975]

I have the Cybertool Lite and love it to bits

[@Mike-kc8rl]

I have had a cybertool since they came out,but a few years ago, I upgraded to cybertool lite, and although not a daily carry, it lives at home in a draw and has been very handy at times ! In fact it's I believe one of the best around the home models available?

[@daveyjones5702]

protip: you can put a rubber band on the pliers and make them into a sort of vice grip. great for holding a wire in place for soldering, or clamping a fish hook to tie it, and things like that.

[@JonGadget]

good idea 👍

[@stevenbrett2467]

Thank you Jon! An excellent and quite useful review!

[@DylanLey]

Great review as always!

[@JonGadget]

Thank you Dylan 🙏

[@TheStoyanbahchevanov]

Hi Jon, I was away so, I have to catch up with your vids. Cibertool is also a niche tool, but there is Victorinox for everyone and that's great. About the can opener, it is redundant on this model, but it has this classic look. And actually I still use it to this day. By the way just got my Handiman back from Victorinox Warranty service, and I have to tell you, they're warranty is great. It is like new. I have sent my Rebar for second replacement, because the small screw driver broke. I am thinking of making a video about the warranty of the deferent manufacturers, because I have tried few of the major manufacturers, and they stand behind their products. Cheers my friend, hope you had some time off 👍

[@JonGadget]

great feedback as always - great idea re warranty experience you should def do it 👍

[@Christian_from_Copenhagen]

I am not the target audience (although I have a Waiter and a Huntsman), but I enjoyed your review nonetheless! Crazy to put two screwdrivers in the XXL, it really makes it look like a novelty purchase for collectors only. PS. That's what they're calling it too on their website: "A perfect collector's piece" 😄

[@JonGadget]

thanks for the feedback Christian 👍

[@lindsayburn1531]

It is a very well made and useful tool set. The only problem I encounter is that the light frequently turns on by accidental contact between the switch (which is actually quite exposed) and another service when you are carrying the knife day to day. I often found therefore that when I went to use the torch the batteries were flat. There is a simple solution to this problem. Reverse one of the battery cells. They are easily accessible and it does not take long to reverse back again when you want to use the torch.

[@gearstuffs8007]

Nice presentation throughout the functionalities!👍

[@JonGadget]

🙏 thank you

[@psimonchess]

Thanks for your excellent reviews!

[@vancedvanced8024]

Very good review mate . I love my cybertool L !

[@JonGadget]

excellent 👍

[@mikkelkjr3723]

Another great review. Only got the Cybertool S myself, but I do really like the screwdriver too. 👍

[@JonGadget]

thank you - great to hear

[@Finance-Food-and-Freetime]

I’m hearing the eye glass Corkscrew driver fits in the main driver

[@appalachiangunman9589]

I bet my brother would like this, he’s a big tech geek.

[@axelmacdonald6422]

This SAK seems the perfect traveller knife - all the useful tools for when you are away from base

[@Bawrabawla]

just got the cybertool m, I am planning to split it into 3 tools: pliers, screwdriver, awl and the blade section (replacing the large blade for a file, small blade is enough for my needs). the can opener etc section with the corkscrew (easy enough to move) and scissors with the hook. I will print some scales for it but I think that will be the best combo I can have, will probably end up ignoring the can opener section but having scissors and pliers operable by different hands is useful imo. Looking forward to replacing a few tools I carry with it.

[@francogratta5358]

Good review. Not the best for me, but it seems very useful for techies. Keep it up with the Victorinox reviews!

[@JonGadget]

I will do, thanks Franco.

[@tpobrienjr]

I agree. I have owned one for 10 years or so.

[@franklinsorrentino2042]

Thank you for all of your interesting and informative presentations. You always add an additional dimension when describing Swiss Army Knives. I always check your channel first for new product reviews. Again, thank you.

[@JonGadget]

that's great to hear - thank you 🙏

[@msakmaxyblasco]

Nice review!!, the cybertool lite it's an amazing tool!

[@JonGadget]

Thank you 🙏 - I agree it is really great

[@grovesy333]

Think am going to getting one for my camera work and gaming consoles

[@xwingrox]

Where do you suggest buying replacement bits?

[@splarv]

Your are the best reviewers

[@JonGadget]

thank you 😊

[@colombianguy8194]

I want one so much! Is it true that the cybertool lite is discontinued? I can't find it in my local Victorinox seller 😢 and online prices are getting very expensive.

[@EricHenning]

It appears only to be available in Japan.

[@m.d.8769]

Definitely best cybertool for me.

[@polanddanny]

Nice video, great review

[@JonGadget]

thank you 🙏

[@JohnnyJuke]

Detailed review of a handy tool. I own the entire series.

[@JonGadget]

Wow! That is serious 👍

[@dhilsiva]

I have been trying to get this but it's not available here. Only the Cyber Tool M is available here. So I'm considering buying it.

[@JonGadget]

Still a great option I would say and a bit more compact 👍

[@dhilsiva]

@@JonGadget thank you!

[@Spanky8402]

These are the tools I need. A few of them like the hook, will probably never be used. The M in blue would be awesome but I can't find it. The scissors, bit driver, the small flat head in the corkscrew, the tweezers, and the knife blade is what I need the most, but the pliers, lite, and the magnifying glass would be useful sometimes. I would get the M and that's what I was looking for but it's so close to the price of the lite, I might as well get the lite. Thanks for the video. It really made me think of everything I could use the tools for.

[@Ericstraordinary]

A friend has a Cybertool and has found that the transparent scales don't seem to really securely retain the scale tools over time quite like the cellidor ones do. Perhaps they are not flexible enough?

[@JonGadget]

interesting - I will look out for that!

[@YourSoulDriver]

I would use the lifetime guarantee if that happens to me.

[@thinh_pham91]

Are different bit sizes available to buy and swap? Thank you.

[@infamousn]

Great review, thank you!

[@edgaraquino2324]

Hello, Jon - my complements to you for the thoroughness of your review...I especially enjoyed your discussion of the related models of this particular tool, good information to know...thanks! btw, do you find the wire cutter in the pliers useful in the applications you were discussing?

[@JonGadget]

Hi Edgar - many thanks for the feedback - the are no wire cuttters in the pliers just crimpers - these are of limited use (need to apply some strength) but do work if needed.

[@edgaraquino2324]

Thanks, Jon - the reason I asked is that I have a wire cutter at the base of the pliers in my Swisschamp above the crimpers...you really can't cut wire of any significance with it, but such a tool would be ideal for the applications you were demonstrating...also, the wire stripper can additionally be used with the pliers as a wire bender...thanks again for your good work...

[@JonGadget]

@@edgaraquino2324 thanks for that - always learning 😃

[@edgaraquino2324]

@@JonGadget you are most welcome...

[@nerevargio]

Thank you for review. I have one, M size, without flashlight. It ia very good tool. Any ideas how to carry it?

[@JonGadget]

Have you looked at the SwissQlip?

[@fr0d0scious]

What I need as a tech is a snip tool rather than scissors to cut cable ties. So: snips, screwdriver, pliers, torch

[@eltelturbo]

I had to send mine back to Amazon as the batteries were flat. The batteries were already installed in this. Was this same with you? Not sure if I want to buy it again because of the limited selection of bits. I thought it would be good for rc but need more hex sizes. Idk.. The pliers are good. The scissors were surprisingly rough to use. I wonder why they couldn't build the led in the scale. My midnight manager is fantastic! Everything I need day to day close to hand and lightweight 😌

[@Чфырктч]

Great video!

[@mjdegrey4843]

I badly need one of these!!!!

[@jakobus6666]

I personally love my cybertool l as edc The package is completed with knipex cobra, my victorinox minichamp, my zippo and two flashlights from a german brand called led lenser

[@JonGadget]

great mix - I have had lenser - moving focusing beam I seem to recall on mine - good quality

[@SubUrbanNinja-EDC]

Excellent video and review.

[@Mr.PastGlory]

Great review! Thanks a lot. One question: Are the bits held in the driver socket by magnetism or by friction? The reason I ask is that I often work on machines sensitive to magnetism. If the bits would be held in place by friction the Cyber Tool would an option for me.

[@henryjtodd]

Friction. They have a small ball detente in the centre of the bits, they’re not magnetic.

[@MurrayD_GA]

How many Lumens is the CT lite's torch?

[@daveyjones5702]

the 2nd driver of the xxl does have a different set of bits in the holder.

[@JonGadget]

that makes sense 😁

[@hanfo420]

I like how he describes the difference between phillips and pozidriv, and then shows a phillips driver but calls it pozidriv.

[@mishogalabov3130]

I want ask your opinion about Victorinox evolution 16. Isn’t it better than Victorinox Compact?

[@JonGadget]

Hi Misho - I mean to do an Evo comparison at some point but for a version with scissors it will not be as thin as the 2-layer Compact - which is a key benefit of the Compact for EDC.

[@Sam_T2000]

I recently got a SwissChamp, and I think my favorite “new to me” tool on the knife is the pliers… I find them very useful. …but the SwissChamp is too heavy for EDC, so I’m looking for a smaller knife that includes the plier… so as far as I know, my options are only the Deluxe Tinker and CyberTool. the Tinker is missing the corkscrew, though, and the CyberTool might again me too big, so I can’t decide 🤷🏻‍♂️ and I wish they’d change out the smaller knife blade for the new small file on the new Companion, and maybe give me an option for just the phillips head/LED light lager, rather than the multi-bit driver system, and that might just be my perfect 91mm SAK 🤔

[@sergemaster]

Bravo Jon, great review, short succinct, and to the point. Question, depending on one's carry method, is there a chance of the light somehow being accidentally turned on when carried in a sheath, be it a Victorinox or aftermarket? Also, what is the width in comparison to the Swisschamp? Plus what material is the bit carrier constructed of.. One last thing, you're not old mate, have a pint at the pub, and watch a rerun of "On the Buses" on me.. Cheers!

[@rado3714]

Ignorant question: just got a Huntsman. Could I replace the tooth pick with a pair of tweezers?

[@JonGadget]

you should already have tweezers! tooth pick and tweezers cannot be swapped (different shape at the top)

[@rado3714]

@@JonGadget Ha! Would ya look at that! I kept thinking it was the tooth pick I kept looking at. Thanks! Great videos, BTW.

[@name5949]

A friend of mine has something the same as this one but wait it's actually got a cigarette 🚬 lighter on it 😂 can you believe it and the cigarette lighter still works perfect on believable 😂🚬 i didn't realize it was a cigarette lighter on till i saw the box it had a picture of it lighting on the box as a smoker i love it saves having a lighter on you all the time when you can have it in your pocket knife plus it's got all the tools of a Swiss army knife it's a fantastic little bit of kit I'm just trying to figure out when it was made because I've not seen any reviews for it thanks for sharing this one with us that bit driver works fantastic i really like it fantastic review of a fantastic tool 👍🏻

[@JonGadget]

That sounds fascinating William - is it a Victorinox?

[@name5949]

@@JonGadget o yea it's definitely a victorinox do you know how i know because it says victorinox on the big blade😊at first i really thought it wasn't a victorinox but yea it says it on the big blade also on the box it says victorinox i didn't realize it had a cigarette lighter on till i saw the box I've come across something the same as it on a channel called White glove reviews he reviews a lot of Swiss army knifes and he also has something the same with the cigarette 🚬 lighter 😊 Go over and have a little look see what you think about it thanks Jon 👍🏻

[@JonGadget]

@@name5949 I'll check it out, thanks for the info - sounds really interesting - hang on to that one!

[@pecosR0B]

how big is it compared to the huntsman?

[@sanyablogger]

Thanks for a very interesting video👍

[@glenmicallef8559]

XXL is mainly for collectors, Victorinox themselves market it as such

[@MSkachenite]

Hey, Jon! I viewed your rewiev about half a year ago. The Cybertool Lite seems for me one of best Victorinox to bought my first SAK. Now, on april, 2023 I cant search this knife anymore, anywhere. Is Cybertool Lite model discontinued?

[@Чфырктч]

Найдено?

[@MSkachenite]

@Чфырктч Нет, не найдено. The Cybertoll was discontinued on 2022. I bought Handyman as my first SAK. Now I have 10 SAKs. :)

[@Чфырктч]

@ из какой Вы страны?

[@teamhonn]

Thanks for the info

[@timupright3776]

excellent info, thanks

[@JonGadget]

you're welcome Tim

[@marka.200]

I just discovered this channel and now I'm over $200 poorer. But I'm gonna really enjoy my new knives when they arrive. ;-)

[@JonGadget]

er....sorry about that 🤣 I think you will be happier though now 👍

[@nicklim9299]

Of all the Victorinox u have..which is your ultimate fav for EDC?

[@JonGadget]

Hi Nick - the Compact - I have a review earlier on the channel which explains why 👍

[@AYellowPepper]

Imo the Cybertool 34 (second thinnest) i build a couple of computers, and those tools are prettymuch exactly what i use from my IFixit Kit The small plies are ideal for plugging in and out fan headers or Sata Cables!

[@sniperoulis]

I already have the swisschamp,that' why i bought the cybertool M and not the L 😊.

[@hitchpost5822]

The plastic toothpick could be used to flip dip switch’s or as a nonconductive probe in fine electrical work

[@JonGadget]

good point 👍

[@배다리혼밥요정]

i want more Victorinox tools with replaceable driver bits!

[@Tool-Meister]

I used the pliers to swap out a rather LARGE power supply in a supercomputer featured in a trade show. Little tool, huge payback!

[@garethlorman1136]

I like the base, the base I like the buttery biscuit base.

[@JonGadget]

er......?

[@xst-k6]

wish they sold this with insulated scales... still have the old model cybertool 41 (discontinued now) and can confirm a few minor electric shocks while using it... ouch😶‍🌫😖

[@RobboElRobbo]

my main complaint with this model is the screwdriver bits fall out too easily, and they are impossible to see, once they hit the ground they literally disappear. i wish they were painted a more visible colour and locked into the screwdriver better

[@JW-2001]

Nice but big carry maybe in bag

[@doubledrats235]

You can’t get a refill for that pen because the whole pen is like a refill with a plastic end. I bought a spare pen but have not yet used up the first one since I only use it occasionally.

[@felipecastro5752]

Greatest vídeo. Do you know swiza swiss? Lord bless you.

[@JonGadget]

yes - review in the pipeline - Felix Immler has compared in recent video also