The Vintage Collection Phase II Clone Trooper 4 Pack (Army Builder) Review!

Hi Star Wars collectors, check out my review of The Vintage Collection Phase II Clone Trooper 4 pack.
Please subscribe to Fuller's Figures
/ @fullersfigures
Become a channel member!
/ @bossksbounty
or
Support me on Patreon
/ bossksbounty
#StarWars #TheVintageCollection #clonetroopers
Vintage Collection Visual Guide:
www.bossksboun...
Want to send some FAN MAIL? address below:
Bossk's Bounty
PO BOX 2154
Worthing
BN12 9EW
Amazon Affiliate Store:
www.amazon.com...
Night Rider - jiglr / jiglrmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3CmBsaH
Music promoted by Audio Library • Night Rider - jiglr (N...
------------------------------

[@McBeard1987]

Those helmets look so much better than they did in the promo shots. Super happy with the results of these. Hope the 332nd clone error you got is a one off and they don't have too many qc issues.

[@DANYVADERDAY]

Long live the new mold! R.I.P "Chicken legs" mold

[@LewisChristisonVids]

It was good on the Genndy ARC Trooper, but I'm glad there's finally an upgrade.

[@LewisChristisonVids]

I agree with you, this should have been all 501st. If Hasbro was generous they could have tossed in 4 extra Ahsoka helmets so you could chose which version and how many you want. If they really needed it to be a mixed legion set, then it would have felt better to get one 501st (with alt Ahoska helmet), one 212th, one Star Corps, and one Shock Trooper.

[@ilovedorkychicks9896]

I'm really glad they only added 2 "colored" clones. I really don't want any "legion" figures, as Hasbro really isn't good with wishlist control, and is hate spending so much for bad paint apps. Plus, with plain clones, it makes it easier to customize. Lord knows Hasbro has released tons of 501 clones (dating back to the RoTS release).

[@protobuster12]

I would’ve been happy with either all 501st or two grunts and two 501st with swappable 332nd helmets.

[@NicholasHallows]

Wow, I knew the helmet for the Andor clone wasn't perfect but you really see how wide it is when compared to the new one. Changes my mind on removable helmets! Looks like they started with a good digital model and just widened it to make it fit over the head. Good to know the heads fit on the new 👍 I'll be getting these from a brick n mortar store so will definitely check the paint apps before buying!

[@shincedon655]

I hope we get carded versions of the 501st and 332nd, it'd be nice to army build those ones without having to buy tons of these packs.

[@attacktoaster6274]

Uhmmm....they already did. 501st twice now.

[@roccoborghetti4693]

I’d definitely get the 501st as a single card and army build that. I’d love a 212th too and plain white single carded

[@Mrdude-uj5hd]

@@attacktoaster6274 when?

[@conradpad5811]

I’m a little 332nd’d out personally 😪

[@Mrdude-uj5hd]

@@attacktoaster6274yeah but they got the skinny mold and oversized helmet

[@VenomSnake00]

LOVE the new helmet mold

[@ConvorOne]

The new helmets look incredible on the live-action body. Hoping the 332nd helmets aren’t all gonna have such horrendous printing on them.

[@CloneCommanderCrater1102]

They don't. I've just received the four of these packs that I bought, and all four 332nd troopers I got had really good helmet paint.

[@ciarandodrill3562]

I'm from Ireland as well and got two packs of these last week and thought they were awesome, as soon as you mentioned the misaligned paint I jumped up to check mine and they were fine thankfully

[@Camtono_Collectibles]

The helmets look so much better now🤩Thank you Hasbro. Please moving forward no more removable helmets for clones🙏🏻

[@Acheron93]

Or Mandalorians!

[@nigelfisher6594]

Should be 49.99…. These are great but they could sort the price points out - they’d sell more. Also they have a winning formula.. rebel Endor, Jawas, ugunauats, officers, cantina, mando’s, Jedi’s…. World builders .. thats what we want!!!! Hasbro we are giving you the answers to all your questions!!!

[@soluciones11s.a.s81]

I just got mine...i have to say. This is what i call a PERFECT figure. Proportion is just perfect. Finally, after all this years we got the definitive clones!!

[@kylandolbe]

Search 501st official render and that’s your true ROTS blue. It looks darker during night time lighting but when Yoda stabs the clone at the temple, you can clearly see that the blue is that light blue-gray color. Hasbro has never got it right in 3.75 inch

[@UnhingingLoki36]

Beautiful figures! Much better than we expected

[@johnmorin7177]

still I hope vc45 can continue maybe make 3 pack of trooper we don't have yet we need repaints for vc45 phase 1 clone.

[@soluciones11s.a.s81]

Lately vintage collection figures became way more detalied, specially for the scale. It's like having a mini hot toys in your hand.

[@shannonpotratz489]

Unfortunate on the quality control, although I'm not entirely surprised. When I got my original Stormtrooper 4-pack, I had a similar off-register issue with the helmet paint app on one of my troopers. And when I received my Rebel Fleet Troopers pack, one of the figures had two left hands...

[@attacktoaster6274]

4 packs in my experience is of a slightly lesser quality.

[@sebdewinterfell5606]

Hi there BB I really enjoyed this version of the clones when I received them . Keep u the great work

[@ThatUafellow]

Great video BB. They are better but for the price, i don’t understand why they aren’t perfect

[@JasonKnapp-qt2ry]

That a great battle pack, don't really care fore removable helmets however would like to see Landing At Point Rain Episode of the Clone Wars with these three battle packs with accessories of backpacks and weapons. Standard White Clones weathered, desert camo ARF Troopers, desert camo Spec Ops Clones.

[@codyconrad4151]

Really hope to see the second battle of Geonosis in the vintage collection! Commander Jet, arf and special ops clones!! Bring them on

[@jpkproductions27]

The new figure is incredible, the new helmet, proportions and articulation definitely makes it definitive. I was very worried with those animated looking helmets in the promo shots, but these looks great and way better than the andor one. Very happy with these!

[@gabesstarwarscollection]

The main thing for me is the individual teeth on the mouth not being painted. But it’s looking better than the removable helmet also seen on the current Appo black series sculpt

[@trooperwolfie]

I noticed that the new helmet doesn't sit on the shoulders like the removal version as well, which is nice. I don't think the neck on the andor version is quite long enough.

[@zuju709]

I love the fact that they are making more clones stuff trust me im all for it. I just thought that they would make them have removable helmets or at least make all 4 of them 501st and not some plain white ones:,) Great review tho!

[@louskywalker9656]

Good to see they fixed the size of the helmet. I still think the chest is to big and the troopers are to short.

[@chaseblank2785]

I want a pack of all 501st

[@qmighty54]

Also, the skinny Clones now look truly, truly awful compared to the new mould. Getting my full case of the Phase I Clones really got me to finally start loving the new mould and it looks great here too especially with the non-removable helmet.

[@viperson9818]

Can’t wait to see a sale for this pack then I’ll grab a few.

[@jasonotoole1822]

Conor is such a legend! Great pack this one, pity about the quality control problem with the paint.

[@ArcAlpha-17]

Love the new helmet sculpt, but I always prefered the new clone face for the skinny molds over the more animated style face of the arc troopers or the andor trooper. So for me the perfect combination would be parts of both, sadly the new ones dont feature an extra head to swap

[@dennislogan9836]

Omg what a difference from the Andor figures helmet it's so damn wide yeah it seems these 4 packs always have something wrong with them well the storm troopers and the clones did I hope they don't mess up the night trooper 4 pack great video brother keep them rolling

[@dennislogan9836]

Oh btw Tim happy Easter to you and yours

[@poolee77]

Should have gotten an alternate 501st helmet with the pack

[@elbarto4595]

idk if im the only one but for the phase1 clone troopers i prefer the chicken legs mold but for phase 2 i prefer the new mold! XD

[@jaredcantor7856]

I do appreciate that the earlier 501st had weathering on the pauldrons, which is missing on new one.

[@XCaimtheReaperX]

The way QC works is only 10 percent of the product is inspected, the rest just get shipped as is.

[@dantooine4279]

Great review and comparisons - None of the blues are correct to the source material in my opinion the blue from the ROTS movie is a very muted grey/blue.

[@johnmorin7177]

still I hope vc45 can continue maybe make 3 pack of trooper we don't have yet like vc45 phase 1 clone repaints still like my idea about Haslab you can choose articulation WANT and don't want. let us choose figure we want on Haslab with are order. me switch it out for vc45 repaint or Troopre me don't care way it look on thigh armour. limb swivel isn't articulation any way you look at it and me don't like new clone troopre. me don't no bossk's have no way legs look like this on the vc45 he must be doing sonething with the camera on the legs of figures I have vc45 it does look like that on my me don't no how his get these version problem here is vc45 legs for phase 1 phase 2 clone look normal not to skinny just right yes I agree with you on the vc45 legs. for the clone wars clone they have same legs height for vc45 phase 2 clone legs he must be doing sonething with the camera on the legs of figures I have vc45 especially new phone me don't no how his get these version awful vc45 figure he must be doing sonething with the camera on the legs

[@universaltoycollector]

Blimey, when you did that close up on the dodgy paint app Clone Trooper helmet, I was like, good god. That is horrendous. In general a decent 4 pack as figures go, they look a lot better proportioned. However, just concentrate on one battalion and not have a mix of battalions.

[@trooperwolfie]

Tim, get some acetone on a cotton bud and remove the dodgy paint off your Ahsoka clone helmet and re paint them in, i know you shouldnt have to, but ive re painted all my andor clone helmets and they look much better.

[@TaksaJG]

yeah i figured the 332nd helmet QC would be bad, even Lego with their military grade QC had problems with that design

[@jessicamarks0611]

I’m a little disappointed they don’t have interchangeable heads, but it looks amazing.

[@yansideabacoa6257]

What does it cost them to throw in 4 headsculpts?

[@WolfofCrom]

How are the peg holes on these? I hope they aren’t shallow like the Boba and Jango Fett deluxe figures.

[@cbzskeleton]

This pack is awesome and these figures are super cool but honestly I have a hard time justifying these packs for almost £60, considering most of them have questionable character choices, and especially if there's quality issues like wonky paint aps or mismatched parts like I experienced with the phase 1 clone 4 pack

[@JoshButtSr]

Looks like the paint was applied by on a machine who's operator was asleep or was quitting later that day

[@dawfydd]

saw this for a decent price somewhere its such a shame that its too many different troopers at once, there is no way i want a mix, such a shame.

[@dawfydd]

even two 501st and 2 plain would work its mostly the ahsoka troopers i don't like the troopers who only existed for 2 days.

[@IceWolf-23]

I will admit I have 3 packs on preorder 😂 mostly so I can have 3 332nd and another 3 501st

[@jessegpresley]

Have you seen Rich from Red Letter Media's prediction on season 2 of Andor yet?

[@chiefnotit418]

ngl i prefer wearable helmets. makes it easier

[@Soundwavesls]

Damn no heads

[@nicholasdickens2801]

The black being misaligned is a bit of a shame on the Ahsoka Trooper but otherwise they look good.

[@rodc6287]

Im really sad that hasbro is attepting to kill the removable helmets, for some figures i dont mind, but named characters?, when i have a figure on display i want it to have all of it’s accesories, i dont want to have to keep the heads out of display

[@dancingvalkyrie]

Hoping for a carded version of the 501st

[@attacktoaster6274]

They just did 2 yrs ago.

[@nightdriver]

@@attacktoaster6274 not with this mold.

[@attacktoaster6274]

@nightdriver this mold?? What the non removable helmet like the first and rocker ankles like the second? Please dude....can we get the rest of the bad bad season one already. It's been 3 fn years.

[@nightdriver]

@@attacktoaster6274 the legs that don't look like spaghetti noodles.

[@StarWarsGuild]

See without a removable helmet I want nothing to do with these, not swappable, REMOVABLE.

[@DMSL2007]

Easy pass, only interested in the 501st so this is not for me.

[@Yourmom753]

The helmet looks a bit different (and more accurate) than the production stills, right? Maybe it's just the paint aps.

[@Vaati-s9v]

really need to ditch the wearable helmets and just do swapable heads. those wearable helmets always looked so bad

[@VicFettOfficial]

The skinny mold made the helmets look good so you can just put one of those helmets on a troop

[@jedimasterboltsproductions6433]

They actually listened to the fans!

[@QuinQueso]

9:54 “Paint jobs a bit crude, but I think it gets the idea across.”

[@michaelhynes7717]

The helmet is better on these for sure but the change bothers me solely because they already released the 212th with the big helmets and now they’ll look weird to me together

[@poky3933]

do the 501st troopers have the blue back? also about the color all 3 of those 501st are wrong lol

[@Ash21]

My 332nd figure's visor paint is awful. the whole upper middle part of it just has no paint. Gives him a real angry looking face,

[@andreha-cheng969]

So jealous 😅 nice review!!! Come on hasbro sort out the quality and control issues 😢

[@BossksBounty]

Thanks for the heads up!

[@StarkIller-df7gw]

Real shame they didn't give us a 501st 4pack & a 332nd 4pack would have been so much better for army building. Shame they didn't get the paint apps spot on on helmet!!

[@toecutter8002]

I think it's about time and way over due for Hasbro to release a Vintage Collection Max Rebo Band and for the love of humanity they have to be carded figures you know have a three pack of them together but it would be nice if each were carded and NOT put in those irritating single card boxes that's gotta be Kathleen Kennedy's evil doing for those peg warming box figures that nobody wants and they're a devil-damn eye sore to look at!

[@SergioFloresHunts]

I thought the middle one was because of the animated clone wars. 😅 I love the new mold definitely movie accurate style! Great review!

[@BRKS1999]

I’d love more named 501st troopers like appo etc they already have him in black series

[@ciscodeer9094]

The four pack looks sick, but how are you to notice the incorrect paint apps ? That's crazy.... maybe some day I'll buy those clone until then smashing review Bossk.

[@dannyramirez8865]

What is the best way for long-term storage of figures? Plastic bags etc. etc?

[@generalgrievous5026]

Finally! I couldn't wait for your review Bosk!Glad you finally got your set and real sorry to see those bad paint apps on your 332nd...There is also a slight problem with the paint apps on the 501st clone trooper(from what i see on all of them including mine)If you take a closer look at the middle of his visor right between the browline and the visor itself ,you will see how the black paint goes out of the visor area and on top of the blue line...I managed to fix this issue on mine,had to scrape of a bit of the paint in that area of the helmet.Appart from that i love this set!

[@Commanderphilbo]

Would really like that 501 on a revenge card

[@fatkungfu1972]

Awesome 4 pack!! I will be getting 2 packs of these. Extra is always more with stormtroopers. 📸🤩

[@thewetnoodl]

what did you just call them?

[@fatkungfu1972]

@@thewetnoodl OOPS!! 😁😁😁

[@kurtk6592]

Looks good. Sorry about that paint there.

[@mcbreezy1568]

Can you turn them around and review them?

[@thebadhandwriting3216]

They can now make accurate Elite squad troopers mate! 🌌☝🏻

[@andymcglinc1819]

Now we just need a gunship

[@qmighty54]

I usually vastly prefer removable helmets but for regular clone troopers, I don't even need swappable faces. I don't need to see their faces at all. Actual characters like Rex, Cody, and the Bad Batch need removable, but regular troopers don't need faces at all. So I'll be happy when I get this set.

[@conradpad5811]

I’m calling it now, I think we’ll get a 501st 4 pack for the ROTS anniversary next year!!!

[@scottwhitehouse7152]

Great video Tim. I’m so pleased they have sorted out the helmet scale. Hoping for a lot more like this in the future. Shockingly bad paint apps on your 332nd, should send that back👍

[@dickiedocker]

Is the all blue guy supposed to have a different stomach piece than the rest of them? He doesn't have the two lines ?

[@moderndemon84]

It's reversed.