Broke My Diff In Half... CHEAPEST and EASIEST Miata Diff Upgrade You Can Do (RX-7 Parts)

[@cmoore74]

Hey Greg... the diff carrier you’re using is from a S4 (86-88) Rx7. The S5 (89-91) carriers are 2lbs heavier. The S5 has thicker webbing across the "beam" .475 vs .320 for the S4. The S5 also has been triangulated in the beam area as well as having the lower web of the beam merge with the output shaft saddle. All in all the S5 is a beefier unit.

[@TheCarPassionChannel]

Good to know!

[@benmarsh9236]

Hi cmoore74, does it matter if the diff is from N/A or turbo, are they all interchangeable?

[@benmarsh9236]

I'm just talking about the carrier, not the whole diff.

[@cmoore74]

Ben Marsh the turbo diff carrier will not work as the case itself is larger and the bolt holes don’t line up to the diff casing. I have two extra carriers if you’re interested. We could discuss over PM.

[@benmarsh9236]

@@cmoore74 Yeah I'm interested. How do we PM on here?

[@akirony]

14:22 i watch for that joyous face when things actually go right. And RIP that front lip, may the asphalt have mercy on its soul

[@4399daniel]

Miata Dad back at it again with a fresh upload. It’ll be worth being late to the office for this 😎

[@vseunos9261]

Good job, thanks for the tip broke several on my v8 miata.

[@mythicanomaly3079]

idiot

[@dil6969]

@@mythicanomaly3079 very rude

[@vseunos9261]

Really was that necessary

[@vseunos9261]

I can get 10 miata diffs for the price of 1 strong diff so I didn't care but its nice to know there is this possibility

[@callen3282]

@@vseunos9261 sounds like some v8 roadsters envy.

[@miralemnermina142]

At least you didn't blow up the transmission again, can't wait for +400hp pulls

[@alantran6901]

Weld plates onto the stock diff. It's cheap and just as effective. Bolt on plates are never as strong or rigid.

[@sam_scott_85]

This. The bolt-on plates are a joke.

[@rockyrocket78]

When holes 🕳 are drilled it made it even weaker. I welded mine no problems

[@devinolburgettoo8314]

AGT also have welded plates and it’s solid

[@OniMX5]

What kind of plates did you use? I haven’t welded before, is it aluminum?

[@delpedrob6994]

​@@OniMX5probably some 6 or 8mm plate welded with a Tig

[@miguelbueno774]

It's just like uncle Ben says with great power comes great diff destruction

[@MrOnemanop]

Uncle Ben was just a cheap Ricer......

[@chromabalisong]

I just found a Miata for 600 bucks with just a broken differential with no other issue and low mileage, if he sells it to me il hopefully will be able to repair it thanks to your super helpful videos

[@mentallystablekanyewest1504]

The one dislike is the diff carrier

[@miatasman9594]

So glad you posted this after I got mine Haha I'm sure the price on rx7 housings is gonna skyrocket actually watched your diff bushing video last week rock on Greg!!!

[@deanedwards5030]

Do the RX7 housing use the same axle seals as the MX5, or are they RX7 seals?

[@miatasman9594]

They are the same

[@miatasman9594]

Bushings are not though

[@couvboiz6712]

Ken E I can’t even find any on eBay 😂

[@couvboiz6712]

Ken E do you know if you have to set backlash and preload?

[@jwsalome]

Saw this video when it came out. Today, I ordered the PPF delete kit for my VG30 swap. Thanks for the constant inspiration Greg. 🤟🤟🤟

[@TheCarPassionChannel]

😳 Which VG are you using??

[@rnelson1415]

I love that exhaust note, but I like seeing you back on youtube even more!

[@Loopyengineeringco]

The crack in the broken carrier runs right through the bolt hole there. If the hole was drilled, that's definitely what weakened it!

[@christianzinn7636]

After seeing this I bought one from ebay for my build as extra insurance, but true to what you said with builds. Things didn't go as planned. The first one, the guy sent me the wrong part. He sent the front nose, not the rear case. He already sold the case, but was kind enough to let me return it and gave full refund. I turned around and successfully bought another case from someone else, cheaper...winning!

[@ryanlocher4177]

For a second i thought you were gonna clean your wheels😂

[@TheCarPassionChannel]

P S Y C H E

[@testacorsa150]

13:16 The sudden unexpected beefed up zoom gave me a good laugh. Another great entertaining video. Keep it up Boiiii

[@charlesmcgehee3227]

A broken diff? Well that answered a recent post of mine asking how well the VVT build is holding up. Great seeing you back.

[@jmpcrx]

I make that 'will it break' face too when I mess with things.. But yeah, this is such a great channel, thanks for spending so much time making all your vids.. Will be going through each one as I'm now starting my own nb turbo build, wanna get it right and learn from your mistakes!

[@callen3282]

Would love to see an rx7 clutch pack swap to go along with the diff carrier. I have a na8 now and I never swapped the guts on my 1.6. So I have this thing laying around with nothing to do with. I devour every video you post buddy. Much love from the bluegrass state.

[@jarrodwest5733]

Super nice of your diff to give your transmission a rest for a change :)

[@Zadnak1]

Do you think the K-Miata differential arm reinforcement plates made a difference in prolonging the life of the diff before it snapped?

[@bakedandsteaked]

Surely it does

[@thelonewanderer420]

It held it together so he could get her home, that’s worth something

[@Zadnak1]

@@thelonewanderer420 good point

[@Jamesfurtado128]

@@thelonewanderer420 to be fair thats worth what ever it costs. Saved on a flat bed and could probably drive lightly for a little while too

[@mathiasmang848]

I don't think it would brake if you weld plates like those in there

[@TheJohnb35711]

Got me thinking an FC RX7 would be a great new project on the car passion channel...

[@Nasonix2]

yes but i care about seeing him do more work on the main miata especially after the new drivetrain swap lol

[@qers]

I want to see him swap in a BP engine.

[@TheJohnb35711]

@@Nasonix2 more work? This thing is a masterpiece.

[@drmoss_ca]

I get face ache driving my NA - the stupid wide grin that lasts for as long as the trip.

[@MRTuning704]

A good tip on removing the axle seals and rear main seal is to drill a hole and then screw in it self tapper and then you can just pull the self tapping screw by the head with pliers

[@Nasonix2]

or yank it off with a pry bar haha

[@dizzyrider3883]

Nice little mention of the Ricer Miata

[@realweston]

“I need to look good for my fan.” @15:48 🤣 singular, only one fan? Lol

[@Nasonix2]

fam lol

[@BuddhaOfDarkness]

Great video with lot's of incidental tips and stats to learn from as usual.

[@iancrosson9513]

Always improving your content! Love hearing that turbo.

[@mikeb9569]

This just happened to my stock 2013 NC. It allowed my axle to separate as well. Luckily, the NCs mounting "ears" are on a separate mounting plate bolted to the diff.

[@ericgarrison5097]

They built these diffs to serve the 120-140hp these Miatas came with,and they meant it. I've read mixed reactions to the rx7 diff. Some wrote they were great to supposedly like 500hp,others claim 300hp or more and it'll explode. I'm thinking if anyone is looking for more strength on a budget,the rx7 is the way to go. Me personally,I'd do either the heavy 8.8 irs or the lighter getrag. Both have plus's and minuses. 8.8 it's,is heavy but are everywhere pretty cheap. Buku parts and ring sizes are available. The getrag,it's much lighter than the 8.8,but no where near the aftermarket support and ring gears.

[@finngurgens3264]

Love all the Easter eggs you plopped in there. I laughed.

[@DeathOrGloryRacingBC]

Borrows parts from stronger car then mocks it in description. That's a kick in the rocker panels.

[@natemorris535]

Project D 😂😂😂

[@ROGUESPIRIT_]

Ah i thought this was going to be a clutch LSD swap out. Looking for info about that for when I swap out my welder... seems a lot cheaper than a custom diff. Edit: I rebuild automatic gearboxes all day and you did a good install on that drive shaft seal. Perfectly done, you got RTV on the inside of the bolt holes too which is missed out by a lot of people.

[@braydoncoate9583]

Bro how do you only have 90k subs still ive been here since around 70k and youre videos are epic

[@TheCarPassionChannel]

I appreciate you fam ♥️

[@xpogosam9690]

14:55 your rear sway bar end link is being held on by the will of the car gods alone

[@evannoriega-thomas371]

Always coming through that knowledge, never knew the rx7 carrier was compatible. Thanks Greg

[@fredlecool1]

Need a drag race between you and rudnick for sure it would be so fucking awesome

[@bakamotorworks505]

Ryobi send this man some power tools!

[@Zadnak1]

Greg, do you not have an 18v or 20v half inch impact wrench? If not, do you want one?

[@zGenjin]

Milwaukee M18 Fuel will be all you’ll ever need

[@khawajadotd]

I imagine he could get one if he wanted. I'd bet grrg's strategy is to use hand tools to keep everything approachable for new mechanics who don't have "fancy tools" An impact isn't all that fancy nowadays, but noobs don't always know that

[@natemorris535]

Gen RIP M18 Fuel is my favorite tool in my box

[@RobOrtiz22]

are you gonna do a build cost video?

[@TheCarPassionChannel]

Very very very soon, I'm thinking within the next 3 videos or so. Already in the works

[@nicolas6820]

Lets put some numbers to see if we get close, i bet greg spent like 20k $

[@dustinabbatoye1176]

Mine just broke as well, a rock fell in front of my car while driving through a canyon a destroyed my diff. I removed the diff and was able to weld and reinforce the whole thing, I just got it back in yesterday and seems to be working great.

[@mgamma5001]

Hey G do you know if all FC RX7 diffs will work... Turbo any stronger than the the NA FC. BTW nice work and love the pointers on the seals as mine are about to get replaced.

[@TheCarPassionChannel]

Turbo FC diff is way stronger but can't be used with the PPF without modifications

[@Thee_Sinner]

6:20 Ooo look, a penny!

[@Zadnak1]

2 videos in a week?!? Keep up the awesome work! PS - Buy an NC!

[@38tech]

Never....na/nb for life....

[@dustinleebladesmith9135]

I'll buy your old diff when you get your Getrag setup!

[@codllc]

The S4 N/A RX7 can have the clutch type diff. The S5 came with a viscous or open diff.

[@MrMeierRecordz]

Is the spring in the diff seal important? Noticed that I forgot to put them back in, and it's all assembled now 😅

[@marinusgouw]

lipseals definitely need that spring in there.

[@Airsoftdude3252]

Yes it won't seal without it

[@bandwagon240]

Typically, I hit the bushings with my purse.

[@mauriciofiladelfo3027]

Hey there, I've been watching your video for long time and a big fan. I have a few questions wondering you could answer cause I'm using cd009 transmission. 1st were you making over 450 to 500hp when you installed the rx7 diff if so do you think reinforcing the diff bracket would help? 2nd i saw you upgraded the rx7 diff to a Cadillac diff and it solved a lot of issues you were having. Do you think it was necessary cause you didn't explain if the rx7 diff was a temporally fix or if it broke as well? My opinion are staying with rx7, or ford 8.8, cadilic o 350z? The car will be making 500hp and wanted tour input. Thank you.

[@mauriciofiladelfo3027]

I found the information that i was looking for. Will be reinforcing the diff for now.

[@jannispfrommer4413]

Great Video. Would have been nice to know the difference in weight between the two Carriers though.

[@jwsalome]

Been waiting for a decent video. Had a FC diff sitting under my VG swap wondering if I could use it.

[@spencer2652]

Greg got so much traction from the Paco arms it broke his diff.

[@iscos2483]

I needed this vid like a couple months ago lmfaooo I couldn’t find one at all

[@erasmus_locke]

Who seriously thought that piece of aluminum was going to strengthen the diff? I like Kmiata but that one piece was a guaranteed failure.

[@patrickfargie1146]

The advertisement for this video had the world's smallest violin playing the titanic sinking song.. lol

[@dil6969]

I feel bad for you having to deal with that bastard driveway. Time for a concrete-ectomy.

[@19mati67]

Most likely, the brace hole screwed up that carrier(the hole weakened it). You should have welded the brace.

[@GeneralPoison]

This. And what's up with the square cut out opposite side of the weakening notches? This would'nt have broken if these two things were'nt done to the housing....

[@TheBreakfastClb]

On the bright side diffs are easier than transmissions lol

[@craig7111]

I’ll be doing diff seals soon so this helps as a refresher 👍🏽👍🏽

[@derakbell8143]

Glad to see you are wearing gloves

[@herrcrazyme8713]

oh yeah miata dad, give me those uploads

[@Culilin]

What's up with that front lip?

[@grim9515]

Oh shit you're back!

[@VinnyVentures]

I got the Torsen 3.9 I think. Super pumped.

[@deanedwards5030]

Your videos never get old 🔥✌

[@blatantlyjohn6234]

RIP front splitter

[@zacks240sx]

Nice shirt, I'm always supporting josh

[@Nebbia_affaraccimiei]

14:53 isn't that uniball joint on the sway bar link a bit off-axis?

[@Nasonix2]

I was thinking the same lol like it's supposed to be something like 90degree in relation to the sway bar or something like that. Sometimes u have to swap over longer bolts and use some washers to get it propped right

[@alexchulzhanov]

The car is jacked up

[@Nebbia_affaraccimiei]

Alex Chulzhanov it isn’t?

[@alexchulzhanov]

Nebbia affaraccimiei hmm, my mistake. As long as the sway bar is parallel it doesn’t really matter. Not like there’s enough suspension travel for it to bind.

[@dunaweezel]

Are the weld on braces worth installing. Mine already has stress cracks there from the stock motor

[@ZeCalanga2391]

reliability -100 points, in stitches man :)

[@epsimega1]

Kmiata's stock just dropped 7 points. That being said, I may weld mine on. Thanks man!

[@bzmiatas]

Thanks Miata DAD!

[@SmukKully]

Will be doing this when I break mine 👌🏼

[@Jaden-up3bg]

What a great upgrade idea!! Noted

[@uh5291]

I was wondering if your exhaust touched the kmiata PPF delete kit. I have that kit that Im gonna install and on a dry fit, my resonator interferes. Thanks.

[@owlytv]

Hi just wondering where you got the ppf delete kit from? Has it held up well? Lots more vibration noise?

[@couvboiz6712]

Hey Greg how come you’ve never ran and Frame rail guards? It’d be cool to see you rock one. Thanks for today’s upload

[@elwindewitte]

Talking about the PPF, does that actually make a difference to either the regidity or the performance?

[@wrth]

In the end it's a roadster weighing under a ton. I don't this Mazda thought some guys would be pulling a lot more horse than stock.

[@WKZworks]

Will an NA FC pumpkin bolt into the Miata in its entirety? I'd much rather have a Clutch type diff. Hell, I actually have a Turbo FC diff lying around. I may put that in there if it's similar enough.

[@whitebear96]

Greg how come you dont have frame rails and butterfly brace on your miata after all this time? any reason for that?

[@daylindrake768]

Do you have a pinion seal replacement video

[@Sertao2013]

I have a 2003 miata and my diff broke in the place you show in the video . What year rx7 housing should I get so I can use the diff I have . Just to be clear I can use the diff I have and it will fit a rx7 housing right ? I noticed you said fc rx7 at 15:07 . what year does the fc rx7 carrier come out of ?

[@donotforgetthis2]

So glad I kept the carrier for my rx7 2 way 😅

[@brianjamal4140]

Dad of Miatas, how do you install Vlsd ears. I know one is longer than the other, but have no clue how to get them in

[@Manuqtix.Manuqtix]

Why is the 1.6 diff weaker? Is it the crown wheel and pinion?

[@pedroortiz9858]

Whats the diference betwen the turbo2 and non turbo It will still fit?

[@TheCarPassionChannel]

No - T2 uses an 8" ring gear and has a bigger housing. 1.8 Miatas and n/a FC's both use 7" ring gears.

[@Az-dq1gm]

I recognize that Jazda intro

[@BogdanBershadsky]

Thanks for your video! Will this mod fit to Mazda mx 5 NB SE 1.8?

[@haufperformance]

Haven't been on a real dyno yet but on virtual dyno my car put down over 600hp with this differential setup with 100% traction.

[@DeffectiveMirrors]

Did the front lip break at the end of the video?

[@brysonshires9742]

Can we see what it takes to kill the rx7 diff? Before you install the getrag

[@NLSNMedia]

ay dog what happened to your front splitter

[@HenzPowell]

Now watch the prices climb....

[@wayneclement7201]

Surprised you've not got an electric impact gun or ratchet Greg, would save you a lot of time, speeds things up a lot!

[@joshua_lee732]

He's used one in previous videos.

[@wayneclement7201]

Been watching his videos for ages now, that's the only reason I'm suprised!

[@christopherrichard369]

Why no chassis braces? I would think you'd have them on the car.

[@TheTerrydactor96]

Yo, massive thanks for this as I've just done it to mine. Need to ask, when bolting the carrier back onto the car, did you find that the outer rubber on the mounting plates don't press up against the arms? Is this okay?

[@TheCarPassionChannel]

They should still press up on the housing. The RX7 housing has the same thickness where the bushings go

[@copous1613]

Nice. I was going to do this but I just went with a turbo II diff and axels. Still have the rx7 na diff if anyone wants it

[@TheCarPassionChannel]

T2 is an even better option.

[@copous1613]

@@TheCarPassionChannel yea just have to make some custom bracing and get a new drive shaft made other than that it's also a bolt on.

[@HotboiEngineering]

Didnt you have the K miata diff brace? So the brace failed?

[@Ben-Rogue]

So, when's that GV lip getting replaced? It's looking rather sad even for a Miata lip XD