Why am I watching this I've done it 3 times already
@jameskent94644 жыл бұрын
samesies, yet i still watched the whole thing, i dunno why
@yakhunt94244 жыл бұрын
Done it loads of times, but it's strangely calming watching Greg do it
@Parker_white_guy4 жыл бұрын
Just did my first one, and I don't own a NB, yet here I am!
@keithbusch40143 жыл бұрын
Same
@jamiewalker87723 жыл бұрын
🤣✌️
@xXEvangelXx2 жыл бұрын
At 20:00, it's important to mention that there is another mark to the left of the TDC mark that is the tension mark. 1 5/6 turns is stopping at EXACTLY that mark after ONE full rotation. Tighten the tensioner bolt to lock the tension, then do 2 1/6 turns (ending at TDC) and everything should line up back up again provided the timing was set properly. Also make sure your car is in neutral while doing this lol
@mtbiata4 жыл бұрын
Dude I literally scream "YES!" when I see a new TCPC vid!
@filibertodelacruz7274 жыл бұрын
I scared my Gf saying that too..
@jamiewalker87723 жыл бұрын
@@filibertodelacruz727 noice
@codyfrye884 жыл бұрын
Miata Dad: The man, the myth, the LEGEND
@MachiavelliPWNS3 жыл бұрын
This has got to be one of the best Miata tutorials on youtube.
@ericschatz49434 жыл бұрын
Mechanic here, use scotch brite pads on your sealing surfaces for a perfect seal everytime
@DRIFTINGFORLIFE184 жыл бұрын
I already done my timing belt water pump and hoses over a year ago, I’ve seen soo many videos of people doing it, but this is by far one of the best! Soo fun watching your Videos man!
@shadowphoenix1374 жыл бұрын
Those first 30 seconds had me dying.
@rogerd9434 жыл бұрын
Pics with your phone, aaahhhh, the future. So damned cool. A lifesaver. Lube your seals and orings before assy.
@lakai9584 жыл бұрын
Also, i JUST ordered stuff to redo my cam seals. It'll be the first ever time I do anything engine maintenance (outside oil changes lol) This video is a god send
@roboman24444 жыл бұрын
Just use an impact on the crank bolt. It is so much easier and you are less likely to damage something in the transmission.
@CarsMeetsBikes2 жыл бұрын
Can you fit an impact down there?
@bigboi5384 Жыл бұрын
@@CarsMeetsBikes if you drop the sway bar and remove the radiator, yes. The sway bar is held in place by 4 bolts on the underside of the car.
@noahyates6362 жыл бұрын
Considering how popular Miatas are now, you should definitely have more subscribers than you do. With how well organized your videos are, you deserve at least 1M.
@PhilTheDrill852 жыл бұрын
Just did my timing belt, water pump, hoses, and seals following this video as my guide on my 97 NA8. Runs and sounds great. Couldn't have done it without this video. Thanks so much!
@DQUARAJR4 жыл бұрын
Nice job, the 1 5/6 rotation for tensioning has a mark on the oil pump at about 11 o-clock.
@dil69694 жыл бұрын
This is great for people just getting into Miatas. I've replaced everything on your list overtime on my '91 out of necessity. It would have been so much easier if I had this video when I bought the car. Turbos, wheels and suspension are awesome, but maintenance always comes first if you want your car to work. Also, to anyone doing a timing belt job on a Miata, I HIGHLY recommend getting a beefy 1/2 drive impact (electric or pneumatic), and a 21 mm swivel impact socket. I had a 4ft cheater pipe with a helper locking the rear wheels and I could not get it off. The torque from the bar felt like it was going to knock the car off the jack stands. I jammed my 1/2 drive dewalt impact on there with a swivel and it busted it off in half a second. Just barely cleared the condenser. Worth every penny.
@tonymorfin87503 жыл бұрын
Mr. Petersen is a Miata Legend. I watched his and Eric's South Main Auto videos when I did my clutch. .. A few times. I wouldn't have done it without them. First clutch job and it went well. They most involved maintenance job I did before that was a brake job. They raise the value of the Miatas a lot.... Have one but want another one or two ... or more... Now I need more money.
@devonswindell97354 жыл бұрын
Version one of this video helped me do MANY things, and not just to miatas. Thanks!
@sebastianherpst4494 жыл бұрын
Thank you Craig!
@Az-dq1gm4 жыл бұрын
Khreg
@callumb51844 жыл бұрын
Kreig
@tristan82434 жыл бұрын
Crack
@stevenlucas68783 жыл бұрын
Mehg
@drewstermalloy3 жыл бұрын
I just watched this so I could take notes before diving in this weekend. I have over 130 bullet points, not including the shifter rebuild or the fuel filter because I've already done those. Thanks a bunch for this, I feel pretty confident to get it done.
@planaproject4 жыл бұрын
Aah yes! The ballcock shankwasher. Such a nice touch!
@onlymarkallen3 жыл бұрын
Really fine content sir. I have been restoring cars for 30 plus years and just picked up an NB with "unknown" service history. I truly appreciate your editing and camera work on this job, not to mention the pace. It is informative and concise. These cars are oddly enjoyable to drive but are definitely a little challenging to work on due to tight clearances. Thank you for taking the time to post this well made guide and encouraging a thorough job. Cheers from NM. A rust free zone with expensive houses.
@TheCarPassionChannel3 жыл бұрын
Cheers from San Diego, same!
@roddydykes70532 жыл бұрын
I’ve been absolutely transfixed by your maintenance videos. The lack of music (or very subtle music) is a big bonus. Don’t even have a Miata yet, but once the snow starts melting up here in Canada I will be getting one. Coming off working on my Audi A5 these things look very DIY-friendly. Can’t wait to mod and enjoy 90s simplicity again
@garycarnes21714 жыл бұрын
Let’s gooooooo Craig 😉
@noeleon134 жыл бұрын
It's grec
@realweston4 жыл бұрын
To
@stevenlucas68783 жыл бұрын
Greg peters *Craig is his alter-ego 🚫🧢
@UnbrandedFab4 жыл бұрын
I got to 31:33 before I remembered I don't own a Miata.
@UnbrandedFab4 жыл бұрын
@Juan Pinol true lol
@alexisknows65134 жыл бұрын
@@UnbrandedFab I have seen NB with rust for $2000 or Mint condition for $10,000 . I ended up buying 2003 with low mileage ,never driven in the winter (no rust) a few small dents ,in way better condition then Greg's and came with OEM hard top that I don't use . Ended up paying $6000 ,just plugs ,coils ,CPS Replaced ,this winter will change gear an dif. oil . Maybe shifter bushing kit too.
@UnbrandedFab4 жыл бұрын
@@alexisknows6513 sounds like you got a good deal! I owned a 99 for a while which is when I found this channel
@croft42003 жыл бұрын
bought onne 2 months ago for 2k its a 93 only had to change brakes ands radiator ..it may nott be the bbest investment for everyone but its damn sure a fun one
@ianoconnor12 жыл бұрын
Yet...
@ch_chone4 жыл бұрын
"there's 6 places you use RTV... blah bla blah ...cam caps" *thinks back...* Holy shit, thanks Miata dad!!! I've had a very slight on and off oil weep for 2 years, I always assumed one of my brand new front cam seals was bad and I was a little bummed about it. I never used any RTV up there. You da real MVP.
@ralphymathew27444 жыл бұрын
NB let’s go! 🥰
@CasualGearheads4 жыл бұрын
Finally some love for NBs ^^ Feels like every NA guy out there needs to yell pop-up related obscenities :D
@ethanpeikari904720 күн бұрын
I’ve watched this tutorial at least 20-30 times this is the Bible for me working on my timing and really helped me get through it amazing tutorial
@shartillery2 жыл бұрын
Just finished my timing belt and water pump job for the first time thanks to this video! It wasn't without turmoil though. The lower bolt of the water pump was loose by about half a turn and it was dripping very slowly behind the timing cover, down the crank nose, and off the oil pan when the car was running. I went back in and made sure all 4 bolts were tightened properly. After I put it all back together, my car cranked but just wasn't firing up...I put the trigger wheel on backwards. Great. Went back in again, flipped the trigger wheel, put it all back and it started right up. I let the car run for a bit and drove for a bit making some frequent stops to peek under the hood and thankfully saw no signs of leaking or coolant smell. Your channel has been invaluable and I've learned so much about wrenching just from doing this single job alone. I feel so much more equipped to work on my vehicles now. Thanks Greg!
@wheeler11764 жыл бұрын
Hahaha, when you put them into the Miata within the first min of the video... Priceless 🤣
@jean-philippelachance82113 жыл бұрын
The best quote in quite some time : «Z stands for : Ze car will not start» -Craig -Crag -Greg
@miguelbueno7744 жыл бұрын
A god amongst Miata owners ladies and gentlemen👏👏
@ivanwang80683 жыл бұрын
Hey bro, just watched it all the way from beginning to end. Took notes like it was lecture. Absolutely amazing video, immaculate detail. 10/10. Have a great day!
@rajanc19924 жыл бұрын
This is PERFECT timing!!! I just bought my kit from Treasure Coast
@gustavrohde85573 жыл бұрын
Its perfect timing for everyone, summer is sneaking up on us. Time do the yearly maintenence
@rcmeeker24 жыл бұрын
Whenever I have to take the crank bolt off I use a breaker bar against the frame or ground with 0 slack and touch the starter. Used that method for several cars. Its like a built in impact driver.
@SGTmadness Жыл бұрын
Wanted to thank you for this awesome video, my nb died and wouldnt start, waching this video made me realise the timing was out. Using this video I have now fixed it and have a running car again. Cheers
@turbo_alice4 жыл бұрын
31:10 superfast build mode ? (Check Good time with Scar on youtube if you don't get it. That's the music he uses for his timelapses)
@Epiphonech4 жыл бұрын
So much time effective how-to without missing important details! Well done, Greg :)
@TheBitterHoney19984 жыл бұрын
You're such a nice and genuine guy :)) I really appreciate the time and effort you put into your work, keep it up!
@gimmefuel72684 жыл бұрын
Dude you are seriously a GODSEND to Meeyotta owners. I swear. 🙏🏻🙏🏻
@davidromba35843 жыл бұрын
It's poetic, Craig. I've used your videos to work on my NA countless times, and I watched this one while replacing the clock spring on my new to me MSM. And forgot to put the nut that holds the steering wheel back on. Twice. And be proud, I've spent an intake and downpipe worth of money on maintenance bits before going for power. I'm proud of me.
@JDub333334 ай бұрын
This video was a godsend! Thank you. Managed to change my timing and accessory belts, water pump, seals/gaskets. Between this and your clutch job video my Miata is ready for more fun!
@timearp65984 жыл бұрын
Thanks Greg for this video! I've reached out to Treasure Coast Miata and ordered my kit. New to the channel, Instant fan Greg! You have some of the best Miata content on the Internet. Good work!
@scottmallory3507 Жыл бұрын
This winter I have my 99 up on stands for a suspension refresh (superpro bushings, koni str.t's, por 15 paint on the control arms, new sway bar end links). And I also have to weld in repair panels into the rusted front frame rails and have to remove the radiator to do this. So of course now is the best time to upgrade the factory radiator and hoses. So of course this also seems like the best time to replace the timing belt along with all the other parts you replaced on your car. I was unsure about tackling this on my own but watching you I think has given me the confidence to do the job. Thank you for such comprehensive guide. Cheers
@alexisknows65134 жыл бұрын
Thanks Greg , I will do shifter bushing kit over the winter ....no more grinding 3rd gear at TMP .....:-)
@NOWSWITCHBACK4 жыл бұрын
I always soak Up your videos... But there is just one tiny problem. In my driveway stands no miata (or MX-5). But as always a perfect Video.
@alexprobalkozik4 жыл бұрын
Well actually I would like the vid twice if I could! You helped me loads with the previous timing vid too and I was able to pull it off but with this guide you helped me to do get some stuff I couldn’t last time like that tiny O ring under the manifold. Great help thanks again!
@ayynuk4 жыл бұрын
I bought my NA about 8 months ago. I had no idea on how to work on cars. Not even an oil change. There was an oil leak by the CAS. Followed one of your videos and changed the o-ring. Unfortunately my dumbass had a harder time putting it back in and messed up timing. So now I had to set timing. Not a big deal, ordered a timing light from Amazon and again watched one of your videos on how to do it and decided to do it in an evening. Got my timing light, jumped the car into diagnostic mode, got everything set up, all good right? NO! There were no reference points/marks to align the timing marks. I thought, well there's no possible way that they just disappear right? Wellll, the previous owner replaced timing belt, water pump and all that good stuff and for some reason he thought that not putting back the lower timing covers is a good idea. It was sitting in a bag that I got with the car. So, my car is out of timing. No way to time it. Didn't have money to take it to a mechanic, no friends, and no garage. Not even tools. Decided to tackle this somehow by myself. I've already watched your "party miatas" videos countless times even before I bought the car. Watched it several times more, went and bought a 50 piece tool box from Harbor Freight and took stuff apart piece by piece in the apartment driveway. I may have looked like a total clown, but damn it felt good after I put my timing covers back, set proper timing after working on it for 2 days. The only help I had was your videos. Since then, I've been fixing my own cars, parents and didn't have to pay for a mechanic since then. I have tools, I have youtube. That introduction and the instructions I had just motivated me even more. Since then, I've done countless jobs that would have costed several hundred dollars. Thank you so much Greg. You don't even know the amount of respect I have for you putting out videos like this.
@CyberCheese392Ай бұрын
Why you lyin
@rcmeeker24 жыл бұрын
Also thanks for your previous timing belt video. Used it to change my NA belt last year. Very helpful.
@testingapril4 жыл бұрын
Piece of flat 1/4" x 1" steel from the hardware store and a drill and angle grinder and you can make your own tool like Flyin' Miata's for the crank bolt and it's pretty easy to get that bolt off. Much easier than using 5th gear.
@carlosarmero5944 жыл бұрын
I’m sure you had the time of your life doing all this because I’ve recently did similar maintenance as you did... great video you went above and beyond with this useful content.
@michaelwormald80153 жыл бұрын
Just finished replacing my timing belt, water pump, thermostat, etc etc following this video and everything went perfectly thanks to this video. Thanks a lot for the top quality content
@christianzinn76364 жыл бұрын
Grrrrrrrrrrreat Video!!!!!!!!!!!!!!!!!!! Thanks!!!!!!!!!!!!!!!!!! You mentioned changing the clutch. I told you before I'm a HUGE FAN of Centerforce Clutches. I had checked in with them stating their upping their game with the Miata Aftermarket. They stated to me that they were working on something, so I BEG YOU to check in with them as their clutches are second to NONE!!! 62yrs old and been to a lot of rodeo's. When I say they are second to NONE, You can take that to the BANK!!! Please check with them. Even if they don't have anything "new" their stuff will hold very well and the pedal feel is like BUTTER!!! Believe me, you will thank me later!
@waypoint-one2 жыл бұрын
I did it. I followed this video and did it all. I even did a vvt tuneup. I've never opened a valve cover before and I got the timing belt right and everything. Took me a month and five stitches but yeehaw. Ze car started instantly.
@alubchicken4 жыл бұрын
Thank you for the NB Style timing belt tutorial, waited a while for this 🤗
@campbellsmythe64724 жыл бұрын
This is such a good vid! Well done Miata Dad, you have crushed it once more!
@drpiv4 жыл бұрын
Watch and rewatch.
@AustinHampton5944 жыл бұрын
a maintenance video on the same day as flyin miatas maintenance monday sale. perfect
@blacknblue15034 жыл бұрын
Done all of these multiple times and this is a good guide, nicely done. Weird feeling not seeing any modding or upgrading done with everything apart.
@TheCarPassionChannel4 жыл бұрын
For the individual Miata owner, it makes sense. For a repair tutorial, introducing a variety of aftermarket options isn't very helpful to the actual jobs being completed, in my opinion. I usually end up taking my cars apart several extra times just to get the most complete and helpful video content out of it
@blacknblue15034 жыл бұрын
@@TheCarPassionChannel For sure. Not everyone needs to know how to install turbos and nitrous. Great vid for those needing maintenance help, the timing trick part I could of have used a few weeks ago myself. All this info is all over the net but it’s nice to have it all in one place. 👍🏻
@iamhacker7984 жыл бұрын
Heads up if ur front seal is really stuck poke a hole and insert a self tap screw and pull put with tweezers.... careful with the critical surface area as this may get damaged if not careful 😅
@saddayz995 ай бұрын
This will be my first time attempting too do this waterpump because my car is actually overheating a little, so I caught it early! So I’ll be watching this tomorrow when I start the process 😮💨 definitely have notes I took as well. Thank you again for this video it’ll help me a lot for tomorrow’s job!
@saddayz995 ай бұрын
So went ahead and did the change, problem now is it’s overheating again, I’m gonna try checking hoses or air locks in the system, but I installed it correctly step by step but now I feel like it’s a hose or a air pocket will be coming back to give an update 🫠
@evannoriega-thomas3713 жыл бұрын
I watched this and your old video to do a timing belt job on my supercharged NB, thanks a ton. My miata would not be the same without you.
@kirkharrell77264 жыл бұрын
2X on TCM. My go-to supplier!
@CarsMeetsBikes2 жыл бұрын
HOLY SHIT IM FINALLY DONE Spent 3 hours first day, 15 hours second day. I did all of the engine work and the fuel filter (I had already fixed my shift knob in the past). This has been by far the most technically challenging mechanical job I have done but I can tell it’s totally worth it. Thank you so much miata dad, couldn’t have done it without you Wanted to add that for crankshaft bolt and cam gear bolt, mine were solidly stuck (previous owner may have used loctite red) that even using over 150 ftlbs torque, I could not get them off. Ended up impacting them, worked like a charm. There was a debate online about whether or not you can impact the cam gears and an ASE mechanic said it should be fine fwiw
@ManuelAleixo813 жыл бұрын
Big Miata Daddy!! Just made it across the whole process on my 02 VVT with the help of your great tutorials! Thank you so much for the effort of doing these great videos, kudos to you!!
@acornhead504 жыл бұрын
My 250k mile Miata is in tip-top shape and I already took care of all the major maintenance items. I don't need this video but I'm watching it bc love MiataDad vids
@bodhizatva4 жыл бұрын
Ive done it on an NA and about to do it on an NB I got half a year ago. Great timing! ;)
@jimeggleton6474Ай бұрын
Thanks!
@TheCarPassionChannelАй бұрын
Thank you! Glad the video was helpful!
@jimeggleton64742 жыл бұрын
Thanks!
@Thee_Sinner4 жыл бұрын
For the shifter rebuild: Anyone with a 6-speed, you dont have any fluid to suck out of the turret. and you can consider the turret a fill hole if youre replacing the fluid completely. Another tip: if your shifter rattles when its cold out, get some teflon tape (the stuff used for plumbing) and wrap the threads before putting the shift knob on.
@PaulChoix557 ай бұрын
Just got an NA6 miata with the GF. You're gonna get at least a dozen views from me trying to rebuild it! A good ol' sunburst yellow with 170k miles. Thanks in advance for the help Papa Miata!
@dumbestoyster4 жыл бұрын
Craig, please do a full BP4W VICS delete & port 💖
@BrandonCardoso123 жыл бұрын
Bout to pick up my second Miata, 95 m edition, and this video was incredibly satisfying to watch. Had to finish the full video lol
@cmonroy84239 ай бұрын
hands up who's watching w/o actually having the car, because this is such a great video??
@TheCarPassionChannel9 ай бұрын
I appreciate you 🙌
@38tech2 жыл бұрын
I had to come back to this and rewatch...I'm tackling my own nb2 in the next couple of weeks. Needs to warm up a bit. Many thanks for the awesome vids. Love the new content.
@realweston4 жыл бұрын
All those back plates are so important. I put the whole motor back together and didn’t realize I had forgotten those until I went to check my timing 😅
@skylerbaez9537 Жыл бұрын
Treated this video like my bible for this job and everything went very smoothly. I have an NB2 so some minor things were different but thank you
@funretirementprojects77652 жыл бұрын
Thank you! This video is a treasure for a new Miata owner!
@dimitriliving2 жыл бұрын
This guy is killing it! Glad I learned about this channel.
@checkupcharter3 жыл бұрын
Excellent video instruction. New NA Miata owner so this video will come in handy for sure! Thank you!
@phreakedout14 жыл бұрын
I just did most of the same work to my NA6 Miata using your previous video. Solid, if aged. Anyway, where is the link to the hose persuasion tool you mention ~6:00 mark?
@TheCarPassionChannel4 жыл бұрын
Added!
@iainbagnall48253 жыл бұрын
Love the hose persuader! It reminds me of my exhaust hanger persuader. A tool I use only once in a blue moon but it saves a world of pain.
@JustusZeemann3 жыл бұрын
Thanks for all the content, and especially for this video (and the old version). It saved me a ton of headage and research and was all 100 times entertaining while I watched it in the process. If you lay in the engine bay talking while I'm building the car, it feels good. Here is nobody with the same amount of passion for our little fun machines. Enjoy your rides and making good content! Yours.
@Alexanderskirvin4 жыл бұрын
Dude love the videos, you posted this vid dead ass 30min after I watched that old vid to do my timing belt
@trolling4dollars8163 жыл бұрын
The best video on this subject that I have found, and I have have watched so many. Thank you and keep up the great work. Thanks for the lead to TCM, they have some great parts and decent prices.
@SpareTimeGearHeads4 жыл бұрын
Quick tip to add, if you want more life out of the the lower rubber tunnel shiftboot "thicken" the rubber area where the boot flexes by adding a coating of silicone about an 1/8 inch thick. By spreading the silicone, this more than doubles the thickness of the flex portion of the rubber boot. I'm going on 7 years without a boot change. I did only the typically area where it rips, and the rip moved to a thinner none coated area. It's best to coat the boot everywhere it flexes.
@MikeGonzalez46104 жыл бұрын
Man the first time I did all of this it was hell and it sucked, but very rewarding at the same time. Thanks again as always Greg, you da man
@J0WAY2FAST4U4 жыл бұрын
ayeee Preg Geters is back!
@ChutneyInc.2 жыл бұрын
Flyin miata for the win on the crank pulley. I'm excited to use the rest of the kit to put it all back together
@abel87353 жыл бұрын
How do you not have more subscribers this is very good information which is very digestible for new guys like me
@trolling4dollars8163 жыл бұрын
Thank you for the complete guide, but I still a fan of the original timing belt video; more detailed. I will rewatch both of these before doing it to my NA. Thanks for the tool suggestions and Treasure Coast's link.
@markw81394 ай бұрын
Im gonna tackle this...The only difference is im using an adjustable trigger wheel from Eight Nine racing to get the 14 degree timing advance...Every bit helps!
@iainbagnall48253 жыл бұрын
Having watched this excellent tutorial, I now feel fully conversant with everything it takes to change a timing belt, and as a result... I think I'll pay my mechanic to do it. Just glad my original owner had theirs done at 60k by Mazda, even though the service schedule for the California NB says to do it at 100k. I'm at 106k now so getting close to time...
@chrishayes28093 жыл бұрын
Hi Greg a big thank you for a completely top drawer video I’ve just completed all of this on my mk1 and I can safely say I couldn’t have done this with just the manual (pictures - 1000 words!). You should get a lot of satisfaction from knowing you’re helping non mechanics do this stuff! Sooo…. could you do a video on wiring in 2 fans with set up for the ME221……..
@fly72j4 жыл бұрын
Great vid as always. I slapped a turbo on my Miata a year ago and still haven't done a timing belt...I should probably look into that
@ruudb44752 жыл бұрын
I did my timing belt. And it work perfect thanks greg peters. greets from Rotterdam holland
@farcarnoth4 жыл бұрын
You’re a legend. Best how to out there.
@ToModorNottoMod3 жыл бұрын
Just finished this job. I probably gave you like 20 views over the weekend hahaha. Thanks for the help.
@Shiznit3044 жыл бұрын
nice one Craig Beters!
@CasualGearheads4 жыл бұрын
:DDDD
@fiffe77824 жыл бұрын
Where's the link for the HOSE PERSUADER
@Spone854 жыл бұрын
great video as usual but 14:35 glass/mirror is better (flatter)