Buckin Blly's powerhouse Pioneer P51! and ol' dave

[e-mail]

[@sandman1124]

Oh Yehhhh.....the Stihl 5.4 92cc is about 1/2 the weight of the P 51 and great for limbing cause u can toss it around like a Bowie Knife....Its like an acrobat using a balancing pole, keeping ur balance/footing when working up a Nasty pile of tree limbs... I’m still using my P41 for that Dance..lol.. the bells and whistles on the newer Stihl I can do w/o... 40 yrs on the P41 and it’s 1st ignition replacement.... all stock on ‘em all...I can’t say that about the Stihl though...

[@skippyjones2077]

Harvey you got those saws screaming and they sound AWESOME you rock Brother...👍👍❤️❤️☮️🙏

[@evankibbe590]

I have to agree with the safety glasses in dirty environment. About trucks. When there broke down there all junk and the newer they are and broke down the bigger peice of junk they are . Love you y'all to . I find your videos very informative and interesting and entertaining and l love story time. 😊😊😊😊😊😊👍👍👍👍👍👍👍👍

[@galedurant6372]

the 51 is my fav saw to run i would rather use that then any other saw just my opion

[@johnthacker5171]

Love the sound of that 066 nice vid

[@ODIE-WAN]

That saw is impressive saw both of them

[@richardsullivan1776]

Harvey, you look good with a Pioneer chainsaw. Old Dave certainly looks great with the America Dream theme. You should put a nice Red Maple leaf on Buckin' P51, he'd get all getty and kid like over it. Like I do about my Husqvarna chainsaw, lol!

[@bustedford]

Cant really beat a pioneer p series saw, ive got a p41, p50, p61 2 farmsaws and a little 1073 i haul around in the jeep for emergencies.

[@vtecpowersaw1577]

Just about to hit the search button on one of those pioneers..it goes hard.and sounds nice ..yea the eucaliptus trees here gave me countless hours of hand fileing sharpening skills ..if you can get that round chain cutting ital hold its edge twice as lomg

[@vtecpowersaw1577]

Safety glasses ? Whats safety glasses .😂

[@danmowery5067]

Love the videos ironhorse

[@Finom1]

IRONHORSE, thank you for educating us.

[@aldredske6197]

Hi Harvey!!😀😀 I'm kinda the same way about safety glasses. I used the screen on the helmet quite a bit. Then when my eyes got bad enough that I needed regular glasses to see. I only wear them and don't use the screen very much. Sawdust sucks on your glasses so you learn how to keep as sharp a saw as possible at all times to minimize the amount of fine sawdust from flying. Six in a row and ready to tow!!👍👍 Love my Dodge!! 264.000 and still runs like new!! Take care my friend!!😀😀 Logger Al.

[@506curtis]

Your slimming down Harvey! It's noticeable. Keep it up! Those are some lovely running saws. That pioneer is a nice saw. I just tried out my jonsered 910 today that I just got its from British Columbia its a late 70's west coast saw 86 cc full wrap big dogs its super cool!

[@mikeyyoyo6464]

Hey thanks Harvey I don’t get much cutting apart from the odd fence post with cheap nasty saws & I could be doing with some of Barbara’s cooking 😁, ya got a spare stable I don’t mind roughing it haha! Love ya all 😬❤️👌

[@aldredske6197]

Hi Mickey!!😀😀😀 How's it going buddy?? Hopefully all is well with you!! Miss you brother!! Logger Al

[@mikeyyoyo6464]

Hey AL all well thanks buddy hope yer all well yer self man, I’ve got more friends over there than here now who would’ve thought it eh? If I get the lottery up I’m outa here lol, good to hear from ya brother 😁❤️👍

[@aldredske6197]

@@mikeyyoyo6464 :) Thing's are good here. Winter is starting a little early this year. You're welcome at my place anytime!!😀😀 Take care brother!!😀😀

[@paulbelden1466]

Keep it real. You are who you are. Your stories,saws and like mindedness keep me coming back. Greetings from the Eastern side of the Adirondack park.

[@michaelpatterson6678]

Nice one Harvey. I’ve been cutting a lot of Black Locust lately. Windfall from a year ago. So hard it throws sparks. If yer chain is not like a razor you ain’t cutting it.

[@dcrog69]

I love it when I come across some black locust for firewood,man does it burn hot.

[@kingtuts1978]

If you observe the technique billy uses in my opinion it is the proper way to buck.

[@sandman1124]

That’s all I run...P 41/51/61’s. Love the Energy ..Keep it up , I love ur Field Blog .....@ 24:1 .... u can’t burn em up ......Nice Runnin’ Saw. 👍😎

[@pdaddyblake]

You can tell it's not your first time running saw old pioneer cuts just about as fast as the old stihl 👍😁

[@themrsparrow7607]

That saw really cuts

[@farmerjackson709]

You know what is neat is that the exhaust burns the paint a bit where it exits. The p51 airplane did the same thing

[@danfaller1089]

Smooth operator

[@CMLovejoy]

Those are some smooth saws. Just let your haters be your motivators!

[@omulus138]

Nice Intro Harv SWEET

[@tazman-kennyfuller]

Looks like ole Dave is rippin.

[@michaelwhiteoldtimer7648]

well that saw runs sweet

[@BigDmike24]

The P51 works great. Ol Dave cuts really nice as well. Iron you can out work me. I cut a tree today and now I can't move. You had Back Surgery.. I had shoulder surgery. One just as bad as the other I Rekkon. I've not been the same since. We got to keep working and press on. I got a lot of Respect for you. Have a good week Sir.

[@pm270100]

arrr i looked at this tube with a hot pack on my shoulder

[@treeassassin8833]

Good videos

[@timbarden4578]

Safety gear doesn't prevent accidents only helps minimize damage. Accidents will happen. Almost got killed year ago when dead one come down on my head. Won't stop us loggers for going back to what we love.I'm back in woods working again..

[@timhart2652]

Mr. Harvey that saw you can cut the whole Forest down with that.. you're a hell of a guy and I love listening to you I just don't listen I hear you.. I love to come to New York spend the weekend with you but for now from the Michigan boy will hear from you soon keep your good spirits up have a good day

[@StumpjumperVideosPA]

boy she runs good !

[@georgemerritt2468]

Awesome vid

[@jameschester3986]

He was a big man wore overalls spit tobacco used pioneers poulans stihl maybe a few macs never got the chance to run a husky he passed in 89

[@colbyc.6698]

Boys smart diesel are supposed to be a inline motor

[@jimgroulx3956]

Hey ironhorse i just signed up....nice to meet you. Q.....the P51 obviously long out of production, is it generally possible to find parts for these when needed. I have a chance to pick up a P51 but am a little hesitant about the availability of parts out there Thanks for the vids, they are very helpful to an old guy like me. With no mechanical and not much cutting background this new hobby is a lot easier with guys like yourself around. Thumbs up from me

[@pm270100]

buckin i need to be there luv it old dave be happy good job well done ////////the best part of the day is right here

[@bobfitch607]

Nothing but good to say buddy 👍 those who talk bad about ya are talking through their ass. Love the way you are..... My kind of person friend 👍

[@1944chevytruck]

NICE SAW!...Thanks for video!....Chevys rule!

[@traynegrau8248]

Gotta tell ya Harvey when I was a kid in my early teens an old feller name of Cockeye would limb with a double bit axe damn near as fast as a saw could.. So age and experience vs youth and energy often outperforms the latter lol👍😎

[@bigsmile542]

Great video. Yes Nelson's are hard workers and bull headed. I am also a Nelson. Glad I found your channel. I stared my chainsaw work with a Homelite XL 12. Almost 50 years ago. You and I even look alike. 6 2 300lb all my life. Keep up the great videos.

[@michaellemon6680]

My names michael im 29 i live in ohio. I really enjoy and appreciate the videos you make. 3 years ago I got into chainsaws and tree work. I like my old stihl chainsaws ive started collection and fixing them. I Have a 1980s stihl 009 top handle i use alot as my trim saw. Its a nice old saw i enjoy running it. Id like to maybe have it modified make it little more powerful. Id like to know your thoughts about modifying my old 009? Hope you have a good day.

[@davidbulich1254]

Been cutting logs for 40 years, and I agree 100% about them glasses they just don't work well when logggin

[@StumpjumperVideosPA]

nice shanty fuel !!!

[@greatgreengoblinbear3800]

On safety goggles ya gotta get the metal mesh bugs I always find chaps to be cumbersome and catch on everything Alota safety gear seems to do the opposite

[@zfs1987]

Harv your cutting style is just as smooth as glass. 👍👍👍

[@richr1870]

Ol dave is cutting great Harv! That is a good looking saw man!

[@proteuspatrick7958]

Nice work Mr. Harvey. Thank you for your service Doc. Shine on brother ❤️

[@307j.o.a.t9]

You got that right on the safety glasses!! Get a hard hat with a shield. I love them. Yea they do obstruct the view just a little but it keeps most of the sawdust out of your eyes. The only time ive had a problem with my shield is on windy days and the sawdust swirls up behind the shield.

[@davidthorne6796]

Awesome Harvey! The old screen meshed goggles work fer the fines... I ware regular eye glasses and they are pain enough! LOL! My helmet has the screen mesh visor... I flip it when down wind...👍😁. When I got hit by the widow maker that ripped off the knee and broke the 5 disk... that aluminum helmet was cracked into about three pieces...so I don’t think this plastic one would really fair well in an accident of any magnitude... I can’t put a metal one on my head anymore... and it holds the muffs and visor...??? If it’s your time...it’s your time.... chaps and three wedges and an axe and I’ll keep on truckin’.... God Bless you and yours!!! Dirt Boy Dave over and out!

[@anthonyjones1864]

Love it Harvey I'd love to cut with you some day

[@traynegrau8248]

Tell ya what that saw pulls hella good!! Wow! Really smooth in the wood..

[@markreep7841]

Great video, enjoyed. My dad and I ran an 041, our first firewood saw. I wear a full clear plastic face shield. Yep it's a pain, fogs up, all that, worst in winter. But I'm still just a firewood cutter, I'd rather take a minute, stop and wipe it than get stuff in my eyes. Not here to argue, everybody finds their own way to work. Congrats on 4000 subscribers!

[@keithsams4301]

Hey harve....you just keep doing what your doing buddy...it is very apparent to anybody watching you handle a saw you know what you are doing ....Ol Dave looks like a winner to me...as is that P51....love the vids man

[@wayne-wango-wever8393]

I'm with you Harv keep it as is!!

[@highwatercircutrider]

Love your videos Harvey ! I would like to run my head saw mill a little tomorrow, but we have a big winter snowstorm forecast in Michigan for tomorrow...Gary

[@kylezornes6842]

Theres a p51 for sale in my town from an old saw shop that shut down.

[@kingtuts1978]

When there’s a pinch point I like to use the bore cut. In my opinion the bore cut is the proper way to buck when the pinch in down or under.

[@wizard1800]

My ex father in law had an old 041 farm boss that was a great saw.

[@highwatercircutrider]

I have a Stihl 041 AV , love it for buckin our big oil’ Michigan hardwoods.

[@colbyc.6698]

Son in-law is that you

[@kenlee6126]

Thanks for the video...u tell em big buddy!!!!

[@jameschester3986]

My great grandpa got cut between fingers kick back 110 stitches drove the manual pulpwood truck down the mountain and then got in his pickup drove to the hospital 😉

[@kingtuts1978]

Ask your nephew If Cummins is so good why did they engineer their Engins just like a duramax?? The duramax was the first to come out the the common rail injection system and changed the world of light to medium Diesel engines and the potential to produce more torque than ever before.

[@tazman-kennyfuller]

Oh I love it Ironhorse. Glad we both got to run an ole P51 this weekend. I love runnin mine.

[@michaelburton5760]

all man im so happy 4000 holy cow keep on doing what you do harvey your awesome man and thank you for vids

[@dieseltrucksfirewood2540]

I keep my spencer tape in the exact same spot on the belt of the chaps as you do. I take a hot coat hanger rod and melt a hole through the belt on my chaps and it make a perfect hole to keep that Spencer tape.

[@daphlavor]

I loved hearing that P 51 run, she cuts! My husky 353 runs well. Thanks Harv

[@richardpfeiffer979]

See you have the modified tailgate on your truck. Old Dave is running good.

[@williamskaggs1887]

great looking saw but you need to put a black or blue STIHL sticker on the recoil cover it would set the saw of looks naked with no name plate LOL

[@jameswilson322]

That is a cutting sob thanks for the video harv

[@tonypavlik4434]

Dave sure is cutting good !!and sure is handsome, what a saw!! Love Buckin’s p51 beautiful saw too!!

[@307j.o.a.t9]

Oh and awesome saw!! Im looking foreward to coming out! Thank you! STAY SAFE!!

[@stevetheriault4164]

DAVE WORKS AND LOOKS AWESOME

[@tedjohn441]

I asked that question Thanks for the answer. Still trying to get this years firewood done I am way behind but I will get that CR 480 you and get some pics to you I will try to do it this week, I wanted to get it in the sun so you could see everything. Any thing you want close ups on I can set the camera up to do very tight pics. Freakin winter is here already and I am sure it is colder up there. I have 4 acres but I start order logs and wish I had a tractor to hall wood out. I have to buck it up and throw the rounds in a trailer to much on my back and new hip.

[@drewdouglas4883]

Is ole Dave a cloned stihl

[@ericsapp6487]

Those saws are running awesome Harvey. Love the vids.

[@markhicks9545]

Old Dave running great now I see go job

[@tazman-kennyfuller]

Thanks Ironhorse keep doin what you do. I Love It.

[@murkstalinskitm5334]

Gongratulations on the subscribers Harv! You're a good man!

[@kingtuts1978]

Your looking good Harvey, keep up the good work.

[@terryw.milburn8565]

Look at them Sub's Climbing, Harvey ! Great saws Have A Swell Evening Friend ! ATB T God Bless

[@nichodson2956]

Sure like your attitude about things Harvey, just talking to you about saws and logging was awesome. Sure would like to cut with you for sure. Who knows a couple loggers might pick up each other's tricks

[@landfillrat7286]

Harv keep the vids coming ❤ you and your boy !!!!

[@jjknowles7348]

Love them old saws

[@eucalyptusleemcconnell8314]

I've got a little stihl 009L it runs great until I tilt the bar up and she dies out like it's flooding or something got any ideas on why

[@StihlChainsaws]

I disagree about the safety gear! You now have a platform to help people, or prevent them from getting hurt worse. I've known men that have lost an eye, due to a chunk of wood. You cant just wear glasses, you need ANSI standard glasses. Wish you all the best! STAY SAFE

[@nightowl7043]

Congrats Ironhorse on the 4000 subs that's fantastic. Your a breath of fresh air love the no nonsense approach the stories are great!!!😉. Oh yeah and the saws are pretty awesome too !!!

[@mikedionne8187]

Wow that p51 cuts like crazy! I recently sold a Poulan Pro 405 (Pioneer p42) that ran and cut great too. Maybe I shouldn't have sold it. And tell your nephew I got a Dmax that'll give his Cummins a run for the money...lol

[@kingkevin160]

The P-51 is a beaut!

[@richp1146]

Holy catfish!! That 51 cuts!! P 51 mustang.. the best airplane ever built. P 51 chainsaw?.. maybe the best also?

[@murkstalinskitm5334]

Hey I wear glasses when I run powersaw, for about 5 minutes then I throw them cuz I can't see shit. I'm wanting to try a pair of them mesh ones

[@lyndonwortley6329]

Hey Mr Battle-ready dragon, you might not have been spitting fire in this video but Buckin's Pioneer was spitting chips! Equipment tips are appreciated. We can see the weight moving Harvey - well done and keep it up.

[@jeffreyrubish347]

Yeah, I love the sweat on the safety glasses, lol, but I always wear them and I'm used to it.

[@johnsandru3907]

Try Bugz goggles. They work well for me. They don't fog or scratch. It's all I will wear now running saw. I can't do the safety glasses. They fog up too easy.

[@jeffreyrubish347]

@@johnsandru3907 Thanks, I'll look into that!

[@markjoudrey7036]

Old Dave has a classic sound

[@genethecook2300]

Hi Ironhorse. Hope you're having a great day.

[@roncorbin1500]

Harvey , tell them big mouths to take a hike !

[@StumpjumperVideosPA]

i think you have probably forgot more about running saw than most guys will ever know lol ! get some buddy !!! that saw sounds great !

[@reddye2331]

I want to find a pioneer now. Damn this channel is gonna break me. I know a old timer owned a salvage yard yrs ago he has a couple way up by rafters of garage/Morton building . Thm and some old mac’s

[@simpleman4224]

That’s a cuttin little booger

[@jimmysixfingers9796]

4000 and growing 👍👍

[@mikeyyoyo6464]

Hey Hey Hey 😬❤️👍

[@TheJonsberg]

She is a runner for sure !!!! Great job Harvey

[@felixcoutdoors]

She cuts! 😍

[@jeffcification]

Have you ever run or seen an 056 magnum 2?

[@theironhorse6600]

Owned em run them for years! A real workhorse!