Your channel has a good vibe. I like it. I just got a free "make it into whatever I want" mower with this engine. Thanks for the free tips.
@BuildProne4 жыл бұрын
where did you get the brass counterweights?
@gabrieletassoni10114 жыл бұрын
Parts's link?
@codyedgington6852 Жыл бұрын
Imma hotrodder myself but gotta rebuild my grandpa's model 28. Question. Where can I find the cam and performance parts? And how much can you shave these heads before you throw the word "safe" out the window
@jimcatanzaro78084 күн бұрын
Where can I get race parts for a model 28 ? Thanks
@vfr012 жыл бұрын
Hey im trying to get this exact mower and motor build but i might go bigger with a Kohler command 14hp do you know any motor builder's
@Biokemist-o3k2 жыл бұрын
Thanks for the good ideas.
@devin40354 жыл бұрын
Do you run with or without the governor?
@TheJanticJournal4 жыл бұрын
Governor is removed with the old old hole for the shaft tapped and plugged. You have to keep in the oil slinger that runs off of the cam though.
@JaydennDirnberger4 ай бұрын
Do you know where you got the parts for that motor
@lrst_196racing53 жыл бұрын
from where can i get this racing camshaft ?
@gonewronggarage45654 жыл бұрын
Where did you get your cam?
@TheJanticJournal4 жыл бұрын
E.C. Carburetors
@nkaratzas7 жыл бұрын
Great Video Guys! I am racing the SP/sportsman class as well! hoping you guys can make it up to Prove It Mower Racing's opening weekend the 27th and 28th!
@TheJanticJournal7 жыл бұрын
+Mud Machine I won't be nearly ready by then, I'm trying to be ready by a national USLMRA race at the end of July. But once my stuff is good to go I'm hoping I'll be able to come up there to Prove It Racing!
@matthewbreeden77483 жыл бұрын
I have a 14 horse ohv motor without the oil filter where do I get performance parts
@waylongreenhaw48063 жыл бұрын
I've ben wanting to build a 12hp briggs but I can't find any parts for it
@dylanphillips97453 жыл бұрын
Hey so I'm new to racing and I have a 13 hp i/c it runs good but I have no governor on it and I'm afraid of blowing it up. So if you count post links for the flywheel and if the rod will work in mine that aswell thanks
@eclipsegst94196 жыл бұрын
Im working on rebuilding one of these. Intake valve seat is a probelem. Someone reseated it and then whacked around it with a sharp punch to keep it in it looks like. Either way its not seating. Is getting an oversized seat possible/feasable? Or should i just grab a different block?
@TheJanticJournal6 жыл бұрын
If you don't have much else invested in the block I would just look for another one build.
@eclipsegst94196 жыл бұрын
TheJanticJournal it was free. My dad gave up on it and replaced it. I got the seat properly seated but the intake valve doesnt close on time for the compression stroke. There is no reason the timing should be off as they never opened it to my knowledge. Just need a pulley puller to check. If its not the timing i think ill just find a bare block in good shape. Or i do have access to a Kawi fc420v, which runs but there are no hop up parts. I found a place that will grind a cam, but arc has no interest in a one off flywheel. I may see if it has a similar snout to any briggs or honda. Im not afraid to fab some stuff up. Experimenting is fun.
@theegwana21038 ай бұрын
Dam I wish I seen you video earlier I just ground the crank and lightened the piston and added counter weights to original weights :/ lol those brass slip ons are a lot more safer with revs by the looks
@AJ-tz6qu6 жыл бұрын
I see you have the shaft with the nut so you can remove the eccentrics. I'm looking for the spec's for a model 28 crank that uses a bolt of what the measurements are where the counterweight sits on the crank. Can't seem to find the accept or reject specs for that part of the shaft. Thanks
@sabbath70814 жыл бұрын
Do they make the brass counterweights for the model 25, 11 horsepower or only for the 12, model 28, I realize the number 25 and 28 is cubic inches, I'm just talking for a regular engine not performance I just want to get rid of the synchro balance rattle on my lawnmower.
@tannermake24532 жыл бұрын
Where does one find the copper head gaskets for these? I can’t find any.
@TheJanticJournal Жыл бұрын
Check out Copper Gaskets Unlimited, they might have them for the flat heads
@gonewronggarage45654 жыл бұрын
Where do you get the brass counter weights?
@TheJanticJournal4 жыл бұрын
I dont exactly remember but I would check e.c. carburetors first
@gonewronggarage45654 жыл бұрын
@@TheJanticJournal yep they had them lol thanks!
@jack2swaggy2313 жыл бұрын
can i get links to all the parts
@michaelmcclain97024 жыл бұрын
What site you order the flywheel off of, i cant find 1 for my 12.5 hp briggs
@TheJanticJournal4 жыл бұрын
I think I got it off of E.C. Carburetors, it's been a while but I think ARC used to sell them directly too.
@hillbillypeakgarage67976 жыл бұрын
How do u rest the value lash?
@BillyRillkratz7 жыл бұрын
By the way, very good video. I like your comments a lot.
@yellowhelmetracing45765 жыл бұрын
Where did you get the needle bearing for the timing gear? I wanna get one to keep my engine running as long as possible!
@TheJanticJournal5 жыл бұрын
I think I got it from McMaster Carr
@yellowhelmetracing45765 жыл бұрын
@@TheJanticJournal Thanks for the reply! I didn't think I'd get one on this older vid!
@benkalinowski58345 жыл бұрын
Hi Cool build Got a question I'm building a 14.5 hp model 28 ohv Can I use the model 28 12.5 hp flathead arc dog bone and the arc rod in my engine Ty
@TheJanticJournal5 жыл бұрын
Unfortunately no don't know the answer off the top of my head. ARC should be able to help you out easily.
@benkalinowski58345 жыл бұрын
@@TheJanticJournal I emailed them a long time ago and they won't email me back No joke
@terrymiller71383 жыл бұрын
Where do you get the performance parts for the 12.5?
@jack2swaggy2313 жыл бұрын
thats what im wondering too he said arc rod and flywheel so im guessing go powersport's
@AEON.7 жыл бұрын
What's it cost to send them engines off to get them worked on - bored and all that? for the twin and single
@TheJanticJournal7 жыл бұрын
+Nicholas Brown The singles we're around $600 for sleeving, boring, clearencing the bottom of the bore for the rod, clearencing for the bigger cams, cleaning the block and the valves. The twin isn't done yet but that's just a straight .020 bore so hopefully it's not too bad
@AEON.7 жыл бұрын
TheJanticJournal that's not too bad actually. Thanks for the reply man!
@alignwelding61606 жыл бұрын
How can we get ahold of you for any questions ???
@TheJanticJournal6 жыл бұрын
On here is fine or a dm on instagram works too
@flamespearmusic93587 жыл бұрын
Is it possible to run these without any counterweights or will they grenade their selves?
@TheJanticJournal7 жыл бұрын
+Mountain Mania I think what people will do instead of brass counterweights is they run a billet "dogbone" and run the stock weights. I don't know how it would act with no weights at all.
@flamespearmusic93587 жыл бұрын
TheJanticJournal ok thanks.
@Small_engine_garage Жыл бұрын
i ran mine without the weights because the aluminium "dog bone" snapped and the motor grenade so i wouldn't recomend using it without them
@NinjaNeglector3 жыл бұрын
Teach me senpai! Lol dude I would love to work with you on these engines! Too fukn cool man too cool
@pigradar84817 жыл бұрын
I have a 900 series intek and I want to put it on something, I had it on a gokart but I had to sell the gokart and now I have it on a old tiller and I want to put it on something else but I don't have any knowledge about fabricating stuff but I want to learn, and I want to put it on anything really but I have a super super tight budget do you know anything easy and cheap I could do?
@TheJanticJournal7 жыл бұрын
+PigRadar Hmm, that's got me thinking. You want it to be something you can ride or just anything to tinker around with?
@pigradar84817 жыл бұрын
I kinda want it to be something to ride, I have a old full metal lawn mower that I have been thinking about slamming it and making it look awesome and put a tow hitch on it for small trailers but I have no clue where to get started on anything like that. But with my motor I have on my tiller, I kinda want to put it on a mini bike or something, maybe a old dirtbike frame but I don't know anything about gear boxes or anything so really, I am just looking to learn anything that is cheap.
@TheJanticJournal7 жыл бұрын
+PigRadar minibikes and go karts are by far the easiest and cheapest to get going. Just keep in mind something like a dirt bike would probably require a lot of customization to make a Briggs work on it.
@pigradar84817 жыл бұрын
oh yeah? Well, for a mini bike, can you find frames for under $100 online or how would that work? I might be able to get my old go-kart back but I am going to have to pay more than I sold it for, but it was a crazy machine, offroading like a 4wheeler, plowing threw everything and jumping over bumps, only thing about it is I need to extend it and move the steering wheel to the center, I do have a small welder that I got for under 100 bucks from a pawn shop, I wonder if It could work.
@stefberkenbos8146 жыл бұрын
What did you do with the valvecover
@Green007ism4 жыл бұрын
Hi, I just got an 11hp model no 254422 and I've been told it'll explode it I take the govnor out and keep it stock. Can I do the same mods as this engine has and if so has anyone got a link to where I can get parts?
@TheJanticJournal4 жыл бұрын
E.C. Carburetors should be able to take care of you
@chuckhuff71237 ай бұрын
It's definitely 10 now😢
@parkerdragracing94757 жыл бұрын
I wish he would've showed us the lobes on the cam
@TheJanticJournal7 жыл бұрын
+Parker Drag racing Unfortunately it's off at the motor shop with the block or I'd take some pics for you and put them on the Facebook page. Are you curious about seeing something in particular?
@BillyRillkratz7 жыл бұрын
Jesus, do oil change more often, black like a mamba. Do you have pressurized lube?
@TheJanticJournal7 жыл бұрын
+Wurst Express That was new oil haha. I think I hurt the motor when I accidentally ran it out of oil. These flat heads are not pressurized oil but the v-twins I have are.
@DANIEL-gg1ir7 жыл бұрын
needmore videos
@TheJanticJournal7 жыл бұрын
+oIN YOUR FACEo0 You're absolutely right! We've been slacking really bad but I've got a little project to show and should be in a video coming out soon.
@ryanjohnson1917 жыл бұрын
the salt is off the roads......break out the G body
@nicholashamaway29545 жыл бұрын
V
@scotttalken84317 жыл бұрын
I be 1st
@scotttalken84317 жыл бұрын
Almost
@hillbillypeakgarage67976 жыл бұрын
Where did you buy the flywheel and the cam and the rod?
@Bleachanna7 жыл бұрын
where did you buy the upgraded parts for this engine?
@TheJanticJournal7 жыл бұрын
+Zachary all the performance parts came from E.C. Distributing
@Bleachanna7 жыл бұрын
TheJanticJournal do you remember which ones you purchased for it? Or a guide that would help me know which parts fit it?