NEO VS FERRITE SPEAKERS WITH JOHNATHAN PRICE

[@giovannigonzalez8279]

Could you review them even more, like which one sounds better

[@qwerty135797]

Great question and answer! Maybe a video explaining the differences between the class of amps (ab vs d), and also the progress of current class d amps.

[@sunnytimoglobal]

Which sounds better?

[@fordflexking2014]

I got neo tweeters and mids and ferrite mids and both are awesome. I prefer ferrite but I can't complain about neo magnets.

[@davidder4516]

Love learning something new every day thanks 👍.

[@jstrick9530]

Do a video on midbass speakers vs midrange speakers !! Thanks 💯

[@TekRageQuit]

This is a MUST for a video

[@Pyroguy410]

I’ve been running sundown neo pros in my doors for years! They last forever and the mid bass kicks hard!

[@D1aNdOnLyNiCkx3]

Are u running the 6.5 v3? Been lookin for a vid on the new ones I love being loud but hate the p.a style sound just did a system with the deaf bounce ap 67an them shits loud as hell but imo sound tinny not a fan I'm teynna find something just as loud as them but more warmer of a sound trynna do a sql setup loud and clean

[@v3zMedia]

​@@D1aNdOnLyNiCkx3 SSA Audio 6.5 Midbass drivers is what you need. They play a full enough sound to hear the instrumentation in the music. Example below: kzbin.info/www/bejne/mZzOi5-ml5Z2iMU kzbin.info/www/bejne/mZSYlX1vn9ualac kzbin.info/www/bejne/qIXOpKR9fLOMrq8

[@beyondthedetails]

@@D1aNdOnLyNiCkx3 What did you end up going with?

[@D1aNdOnLyNiCkx3]

@@beyondthedetails so I found a good set of the dbs the neos but haven't installed them, i have a 18sound 8 inch might stick in the rear deck to cover more of the mids and use the deaf bonce ap-m67ans in the doors haven't installed yet because I might change my mind so current setup Is a chuchero with two ten inch 18sounds speakers with prv tweets for the mids and highs along with the stock doors do the job pretty good for now (genesis g80 17 speaker system) in the truk custom built box I built tuned stupid low (oops 😆) with two 12 ct sound meso's latest version on a jp23v2 the chuchero is off an alpine mrv-f600 signal is grabbed from stock amp to a audiocontrol dm810 stock 200 amp alt stock group 49 bat in the trunk for now untill I get lithium I have other projects and the genesis is my daily once the weather gets better I'll figure something wbu?

[@beyondthedetails]

@@D1aNdOnLyNiCkx3 I have the 67AN also. Sold my RT and just got a Widebody Scatpack and haven’t installed the speakers yet. I too noticed they are super loud but do sound tiny. Running a 15” Sundown XV3. I am thinking of getting Midbass 6.5”(G2 Dynamics) for Doors and Rear Deck(Challenger speakers are in rear deck) add a 8” DB Neo speaker in center hole of rear and add 4 apocalypse amp-T25 Tweeters for Midrange(2 in doors and 2 in rear side). The Arnold’s are great. I thought I was the only one who didn’t like the tiny sound. Now I know I am getting Midbass speakers this time around.

[@octavio136]

Thanks for answering my question 👌🔥

[@Pittsburgh-412]

I wanna see a sub the same size as a zv6 but with a neo magnet instead 🤔 😕

[@luisalmestica9530]

How come you don’t have any of the PRV audio speakers?

[@Fozgate4000]

So they are both rated the same power. Is the Neo louder then the Ferrite?

[@bhagwansinghrana8224]

Which amplifier is best between Atom 2.5K Pro & Atom 3.5K Pro for playing one sub woofer having 2000 watts rms, model number DB- SA302D2 ? Plz suggest

[@Tjcin513]

2.5k will be do fine 3.5k is only gonna be a lil louder tbh your sub should take it fine but with 2.5k u can have better piece of mind bumping for longer periods

[@isiahgreen8405]

What's the biggest speaker wire these Arnolds will take?

[@bhagwansinghrana8224]

Which sounds better between ferrite & neo speakers ?

[@sunnytimoglobal]

I keep on asking this question, no answers!

[@jovenalperez-yh7wv]

Google it…

[@lemar1450]

​From what i read, neo speakers sound better due to the strength of the neo giving better and accurate voicecoil and cone control.​@@sunnytimoglobal

[@IvanToman]

Both can sound great, or bad. The magnet type does not determine the quality of sound reproduction... in most cases, the neodymium type can be made more efficient with similarly sized magnet, so it has larger SPL for the same power. Not neccessary better or worse sound quality.

[@lastkings2075]

What’s the best 10 inch midrange speakers out there

[@silvertongue3003]

I live in the deepest part of Africa and have honestly never seen neodymium speakers before, so please excuse me if I ask stupid question. I was just wondering is the coils in the 2 different magnet speakers the same or does the neo have to be more robust because of the strength of the permanent magnet? Then I was just wondering about the actual performance, do they perform any better sound any different, if you had to compare them to a ferrite speaker of similar quality/performance range. I can imagine that the neo speaker would have a much wider hz range because the neo magnets is stronger and more responsive and accurate? Is neo speakers more for auto or do you get them in room speakers as well

[@lukasHenchman]

3:10 the metal casing is not for cooling only, metal plates can boost the magnetic field of the magnet to a point...

[@robertstembridgejr7532]

How do they sound compared to Focal’s higher end component speakers?

[@pete1320]

Does the magnetic force degrade quicker with ferrite or neodymium over time?

[@pete1320]

@@DTW-bx2vy thanks for the informative reply!

[@pete1320]

@nate0 solid info thanks

[@Chill_Please]

So I'm looking to do a full build in my Focus ST. I'm not going with a crazy sub this time, just maybe a single 12. But what I'm wanting to do is find basically audiophile grade speakers that I can do a crazy surround sound setup with. I'd prefer not to run 300 watts per speaker, anyone have any suggestions?

[@drzflyest4]

You can run them at lower power. They will still be loud they are very sensitive

[@waba6257]

Is the neo models discontinued? If so what’s it’s replacement. Thanks

[@justinfoxbody]

Neodymium magnets have a smaller magnetic fields. The energy is focused on the coil

[@adamnorwood8084]

Good to know. Good question and answer jp

[@justinishaq7555]

Hey jp is the zv6 better than the nsv3 or the nsv4?

[@AlamoAutoDiaries]

What ratio for sub to mid/highs is a good amount for a balanced/clean sound? 60/40? 70/30?

[@Supercharged1976]

So if you buy a pair of these and I already have 150 rms soft dome tweeters that tie into the door speaker can these play the same range as a coaxial 6.5?

[@indiobaez3314]

How Do These Speakers Stack Up Next To More Expensive Brands?

[@emmanuelibarra3508]

Can u let me know what amp would u recommend for 4 of them not neons one tho

[@DIYHemiBuilds]

12 or 15 which is louder?

[@ChaosTherapy719]

They both play the same volume. The difference in the cone size comes into play with playing low frequencies below 28hz 12s can't play lower then 24hz without bottoming out, but a 15 will slap down to 15hz

[@bigkato3134]

If all factors are equal 15s are louder because cone area is king also proper box tuning and any sub 6-18 can play any sub subsonic frequency it depends on the amp and the enclosure tuning just think about it a Bose systems it crushes low because of the design of the enclosure if a sub is bottoming out 2 things your playing way below tuning of your enclosure , also too much power and if the sub is out of phase good luck

[@ChaosTherapy719]

@@bigkato3134 then how come you can bottom out a Sundown X on rms power? Man your only explaining it from an abusive standpoint. And Bose is pure overpriced 🗑

[@ChaosTherapy719]

@@bigkato3134 if cone area really is king, then please explain how my single 10" Sundown Xv2 beats most 2 12 systems who have 24" of total cone area vs only 10

[@ChaosTherapy719]

@@bigkato3134 you realise that you can bottom out a Sundown X on 800 watts which is completely underpowered on 20hz 😂😂😂😂😂

[@ericapettinaro]

Same go for neo vs. Ferrite subwoofers?

[@rowboyto156]

yeah the neo sub will be lighter but cant really abuse it cuz once it get hot near its curie point it neo loses its magnetic power then you have to get it re magnetized

[@angelnoguera1209]

@@rowboyto156 how do u get it magnetized?

[@kevingarcia1539]

Whats Going on JP, great stuff man… if you get the chance to see this and reply or even make an informative video I’d highly appreciate it and I’m sure a lot more people would too. Im currently in Central Florida about to visit Ivan and your Tahoe and custom empire and I have a great question… I currently have two sets of AP-W81A | 8” going into my truck and want to know what sounds louder and better, either the AP-W81A | 8” or the new updated AP-M67AN | 6.5" neos. Thanks in advance brother, once again appreciate the advice and your material on your channel.

[@bhowell95]

I have 2 sets of the neos in my truck on a Deaf Bonce 600w amp. Great setup!

[@xaviananderson4945]

Your the man JP!

[@ArmandoMartinez-ci7nr]

What amp can run on 4 of these neo 6.5?

[@karranramsammy4386]

Taramp 3000

[@denisbasshead7787]

Neo magnet all day ...way better

[@sunnytimoglobal]

Which sounds better and durable, which is my concern.

[@joeyjustin6895]

THIS WAS AN EXCELLENT VIDEO A++

[@johnnoehl8917]

Why do the big 3??

[@Stonefactor]

Another great video, thank you.

[@steezygeo4115]

had 3 go out on me still wondering why

[@xiongxiongloft5937]

Yes as soon as the neo gets hot it don't sound as good...

[@ChaosTherapy719]

And they stink badly too

[@ovalwingnut]

Well explained. Thanks for the "regular guy" speak...

[@wacko69]

do you have in mind to do de down4sound speakers in neo version?

[@xXYoguiPRXx]

TeamNeo! 😄

[@3six5]

you owe my boss a 2 liter of coca cola.

[@denisbasshead7787]

Yeahhh Boss excellent speak and video 👈👌

[@adamsdiyandrandomvids5379]

Well jp have some neo that are d4s

[@IvanToman]

Why do you repeat in several occasion the RMS power of the speakers in context of magnet type? There is literally zero (0) link between two. The specified RMS power is the measure of the thermal handling capacity of the voice coil, before it become too hot and melts down. It has nothing with the magnet itself, which strength dictates the speaker efficiency; the more specific, how efficient the driver is in converting the electrical power into voice coil movement. And that has nothing with RMS power of the driver.

[@mobettaspice]

Why is it cheaper on deaf bounce website?

[@THELIFEOFPRICE]

We are currently both running sales on the Deaf Bonce brand so the price should be the same on all the equipment. If it’s not you’re more than welcome to give us a call to get the sale pricing before it ends on the 28th. 702-701-9800

[@Winters506]

This guy just trolls in the comments. Click on his profile and all he leaves are sarcastic and negative comments. It’s always the ones that don’t have two nickels to rub together that are the most opinionated. Troll

[@mobettaspice]

@@Winters506 darn you got me. Thanks for visiting my profile. Care to leave 2 nickels for me to rub together?

[@Winters506]

@@mobettaspice Is that what the toll is to cross your bridge? Now go hop back under your bridge.

[@mobettaspice]

@@Winters506 First answer this riddle.

[@joerunge3915]

do more videos at sound system shows!

[@christopherrobin3111]

Also pair Em up with a nice set of tweeters...lol.....🤪. They..super loud..

[@thomasschafer7268]

No difference in sound. Weight okay. Construction deeph is important. Neo reacts higher temp for the coil. Earlier death!

[@georgec6228]

Got a set of 6.5 db neo in my Dodge ram rear doors ...loud...

[@MichaelAskew-qy5iu]

Hanging kids on doors! lmao!!! But point came across, thanks jp. Going with neo's

[@djjewstavete2325]

Awesome mids

[@christopherrobin3111]

Thay .. nice... an heavy... too.. Is loud also.... Is proud owner of them

[@JailBiden]

I need a job car audio wise lol

[@lkjyuiop1987]

I sure would like to hear one in person I got money to burn

[@necromniconlives]

Sir come fear ants. 😂

[@buckyflex1]

Circum-furrence

[@dirtbikedrone]

Neo jp

[@buckyflex1]

I need a double sandwich a turkey turbine a broccoli Roadhouse

[@dylanlagerstrom2174]

Seems a little bit over your head JP... The fact that you knew nothing about your own build at slamology a couple years back makes me wonder why you're trying to explain neodymium speakers in your own words...