🔥 Lightburn V 1.5 Sneak Peak of the Top 10 NEW TOOLS!

➡️ Click on ...more↙️for the VIDEO MENTIONS and other Links!
➡️ Here is a link to the new features for GALVO from my partner, Patrick, at Light Source Engraving: 🔗 • LightBurn 1.5 Beta for...
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30 are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
❓ Need a crash course in Lightburn? This is the playlist for you!
🔗 lahobbyguy.com/playlist
✅ Grab a drink, sit back, and get ready to learn how to use Lightburn!
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
Need to mail me something?
The Louisiana Hobby Guy LLC
4945 Grand Terre Drive
Marrero, LA 70072-6613
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic #lightburn #tutorial

[@TheLouisianaHobbyGuy]

Here is link to the new features for galvo from my partner Patrick at Light Source Engraving: kzbin.info/www/bejne/Z2e5l3ejpJmsZ9U *HERE'S THE LINK TO THE PUBLIC BETA if you're interested in learning it!* drive.google.com/drive/folders/1eOw5Ea2soarfXAcKJjq5bDgtstpXTfNX

[@user-zq6pj5jo8j]

When will V1.5 be out to the rest of us?

[@HeirloomGameCalls]

This has my attention locked in!!! Brand new Racon Fiber 30 Watt with 175, 300 and 70 lenses. That's as far as I have really gone with it. A few small projects, no deep engraved though.

[@TheLouisianaHobbyGuy]

You just replied to the comment with the link to the public Beta, so... now I guess!

[@quoteology-4U]

Hey there, I just want to take a moment to thank you for all of your efforts. The average person who isn't involved in making video content may not realize all of the time and efforts that it takes to create quality and informative projects. So, I just want to say, thanks so much.

[@TheLouisianaHobbyGuy]

You're very welcome!

[@mikasmith9096]

I can't thank you enough for your tutorials. I have a healthcare & tech background, and when I started my business, Lightburn seemed daunting to me. Thanks to you, I'm finally understanding how to use this software ❤. God bless you, sir.

[@TheLouisianaHobbyGuy]

Great to hear Mika! 👍 Thanks for the comment! 🙏

[@IanFlyinGremlinRCNZ]

Thanks for the update Rich, Its really exciting what is comeing up. I am so looking forward to the new features.

[@TheLouisianaHobbyGuy]

You bet Ian!

[@jewijk]

Thanks Rich for the sneak peek, like it a lot. Can't wait for version 1.5 to be released. Great presentation as always!

[@TheLouisianaHobbyGuy]

My pleasure!

[@JamesSmith-zq9kx]

It’s frustrating to watch some other videos and see them teach how to use lightburn and not knowing the program them selves and it’s amazing features.You have the most informative videos and easiest way to learn from. I appreciate how much you progressed my learning by watching. Thank you so Rich!

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@3DHP]

Thanks for sharing Rich. Amazing stuff. I shared this on my socials.

[@TheLouisianaHobbyGuy]

Awesome, thank you Jerry!

[@ajbahe]

Dude! Your videos are great & thank you for making them!

[@TheLouisianaHobbyGuy]

Glad you like them!

[@TheGuitarman1968]

Thanks for the Lightburn version 1.5 update preview, Rich. I have been working with Lightburn for quite some time now, and version 1.5 is the first update that I have actually been looking forward to in a while. It looks like this update will have lots of new and useful features. Keep up the great work! 👍 👍

[@TheLouisianaHobbyGuy]

Glad to help! The link to the Beta is in the pinned comment if you want to use it now.

[@mardakworkshop4450]

thanks man I learn a lot from your channel ❤❤❤❤❤

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@arthurbell979]

AWESOME! I have this version and had no idea these tools were there. Will absolutely save time! Thanks Rich!

[@TheLouisianaHobbyGuy]

Glad to help Arthur!

[@slhasebroock]

Wow those are some awesome changes! Thank you for the preview!!!!

[@TheLouisianaHobbyGuy]

You bet!

[@coulterjb22]

Thanks for posting. i missed this from you entirely. i look forward in seeing the Galvo version. Its out but you're stuff is easy to watch :)

[@TheLouisianaHobbyGuy]

Try this one: kzbin.info/www/bejne/Z2e5l3ejpJmsZ9U

[@SuperWidget100]

Jason and the lightburn gang always improving. I love that it's growing as people suggest things.

[@TheLouisianaHobbyGuy]

Me too!

[@3DPUK-TECH-CHANNEL]

Awesome updates 👏 thanks Rich

[@TheLouisianaHobbyGuy]

No problem 👍

[@deanaduffey1260]

Thank you for showing us. Sounds like you a feeling better, hope you continue getting better. Since it is still beta hopefully they listen to you about your drop down idea for the art library.

[@TheLouisianaHobbyGuy]

I hope so too! The link to the Beta is in the pinned comment if you want to use it now Dean.

[@aaeffectstudio8279]

Thanks for your review on these updates

[@TheLouisianaHobbyGuy]

No problem 👍

[@richardbringenberg4106]

Thank you Rich, 1.5 is going to simplify so many functions.

[@TheLouisianaHobbyGuy]

You bet Richard!

[@schlotdoglaser]

awesome video as always. What I am hoping for (and have submitted a few requests to Lightburn) is ART LIBRARY dropdowns like what the material library does. It would be so helpful if I can have a "Christmas" library and under that I have Ornaments, Grinch, Elf etc. as dropdowns. As it is now, I have to have a library for each group of images.

[@TheLouisianaHobbyGuy]

Yes, I submitted a feature request for the same thing last year! The ability to add sub-folders to the Art Library.

[@schlotdoglaser]

@@TheLouisianaHobbyGuy well, you are the Lightburn GOAT so maybe they will listen......LOL

[@TheLouisianaHobbyGuy]

They base it on upvotes.

[@stevekinnaird6835]

Great update. You do a great presentation

[@TheLouisianaHobbyGuy]

Thank you kindly Steve! I still have a lot to learn with this video stuff though.

[@TubeDaLube]

Thank you,enjoyed this alot ...great info 🤝

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@larrystaas1940]

Thanks for the heads up! Good job as always.

[@TheLouisianaHobbyGuy]

Thanks so much Larry!

[@JimmyLee0757]

These new features will be a game changer. Can't wait to get hooked up. Thanks for the sneak peek.

[@TheLouisianaHobbyGuy]

The link to the Beta is in the pinned comment if you want to use it now Jimmy.

[@darrylwhitman8475]

thank you for the sneak look of 1.5 lightburn your videos are great.... Draz

[@TheLouisianaHobbyGuy]

Glad you like them!

[@andrewvanderweg5075]

Excellent... can't wait for 1.5

[@TheLouisianaHobbyGuy]

Read the pinned comment Andrew. There's a link to the public Beta there.

[@charleslamont2963]

Thank you very much. Always great learning.

[@TheLouisianaHobbyGuy]

Glad to hear that Charles!

[@ImmaculateComics]

thanks for this, great video!

[@TheLouisianaHobbyGuy]

Glad it helped!

[@robertarmstrong2323]

I was just thinking about this for material test earlier today...perfect

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@mrwillowwayranch3975]

That guideline tool is awesome!! I am one that is tired of drawing my own guideline with the line tool!! Awesome!!!

[@TheLouisianaHobbyGuy]

You and me both! Read the pinned comment. There's a link to the public Beta there if you want it now.

[@steveferguson1232]

Thanks Rich. Can’t wait for new release

[@TheLouisianaHobbyGuy]

You bet! Here's the Beta if you want it: drive.google.com/drive/folders/1eOw5Ea2soarfXAcKJjq5bDgtstpXTfNX

[@BennettsWoodWorks]

great video and tips on whats new and coming thanks rich

[@TheLouisianaHobbyGuy]

You bet!

[@leonardleblanc4194]

Thank you Rich for your teaching

[@TheLouisianaHobbyGuy]

You are very welcome Leonard!

[@herbbrowning3823]

Thank You Rich! Yes LB is the best.

[@TheLouisianaHobbyGuy]

No doubt Herb!

[@hectortorres8580]

Like always thanks for the updates

[@TheLouisianaHobbyGuy]

No problem 👍

[@donniee1934]

Thanks Rich, you are a wealth of knowledge.

[@TheLouisianaHobbyGuy]

I appreciate that Donnie!

[@Astrid.M]

Thanks for sharing it’s awesome

[@TheLouisianaHobbyGuy]

Thanks for watching!

[@StumblingBumblingIdiot]

Nice look forward! Can't wait for it to be fully done and released!

[@TheLouisianaHobbyGuy]

The link to the Beta is in the pinned comment if you want to use it now Mike.

[@CockatoobirdmanBill]

Thank's for the line on 12x12 wood new to lasers just ordered 25 pc. from e-bay start cheep, to do my homework!!!! thanks so much, running testing with LaserMATIC Mk2 10-30 and all the stuff on lightburn 1.5.00 💯

[@TheLouisianaHobbyGuy]

Glad to help!

[@Paul-LaserDope]

Some nice new additional features and a few tweaks to some existing too

[@TheLouisianaHobbyGuy]

Lots of new stuff!

[@isaiahgillett2573]

Getting excited!

[@TheLouisianaHobbyGuy]

The link to the Beta is in the pinned comment if you want to use it now Isaiah.

[@LarryDMitchell]

Great video, as always, Rich. I'm looking forward to the update. Lightburn is a GREAT program and so robust. It is easily worth the price, and mine expired in early January and I renewed at half-price. What a deal!

[@TheLouisianaHobbyGuy]

Absolutely!

[@patrickdjebar9225]

As usual it is a pure deelight to watch your videos

[@TheLouisianaHobbyGuy]

Glad you like them Patrick, thanks!

[@Jay.C.H]

Thanks!

[@TheLouisianaHobbyGuy]

You bet! Thanks so much for the support @Drirot

[@wallygeriostrowski2035]

Thanks for the preview, they are going to be some great improvements.

[@TheLouisianaHobbyGuy]

You bet Wally!

[@wallygeriostrowski2035]

@@TheLouisianaHobbyGuy I just watched your text welding video that was great. Being a newby I really liked how you highlighted the cursor showing where you were moving to or grabbing something in your demo. It was so much easier to follow. I appreciate when you slow down a bit to show these tips. Thank you so much for all these instructional lessons, you are a very good instructor.

[@TheLouisianaHobbyGuy]

Thanks Wally!

[@HeirloomGameCalls]

I'm EXCITED!!! i'm in the Hospital again but when I get loose and on the computer, I'll watch for it.

[@TheLouisianaHobbyGuy]

The link to the Beta is in the pinned comment if you want to use it now.

[@HeirloomGameCalls]

@@TheLouisianaHobbyGuy This down time I have recovering may be a good time to do that! THANKS!

[@KevinKearney100]

Hi Rich. My name is Kevin. I bought a AlgoLaser end of November and I want to thank you so much for your help in getting going I have learned a lot from you and have made some really nice things though your guidance. Thank you. Keep up the great work.

[@TheLouisianaHobbyGuy]

Glad to help Kevin! 👍

[@beatleleebailey]

Thanks Rich, I downloaded it yesterday 2/6/24 and it had an update today 2/7/24.

[@TheLouisianaHobbyGuy]

Yes, I saw that.

[@sharonsimonson5392]

Thank you! Looking forward to this update!

[@TheLouisianaHobbyGuy]

You bet! The link to the Beta is in the pinned comment if you want to use it now Sharon.

[@sharonsimonson5392]

@@TheLouisianaHobbyGuy I have a question on the beta version for LB v1.5. If I download it now will it override my current version or will it create a new LB shortcut? Wondering because I have 3 on 3 different machines and I'm trying to decide which one to put it on.

[@TheLouisianaHobbyGuy]

It will overwrite the current version Sharon. Don't worry, it's been in Beta for a long time and it's pretty much bug free now. Worst case scenario is you run the installer of the previous version to overwrite it if you don't like it. They'll both likely be in your downloads.

[@TheLouisianaHobbyGuy]

It will overwrite the current version Sharon. Don't worry, it's been in Beta for a long time and it's pretty much bug free now. Worst case scenario is you run the installer of the previous version to overwrite it if you don't like it. They'll both likely be in your downloads.

[@sharonsimonson5392]

@@TheLouisianaHobbyGuy Thank you! That’s very helpful!

[@DeclanGreen]

Thanks for the preview of the v1.5 new features. You mentioned you make a lot of clocks in the video. Have you a video on them, I would love to see some of your clock designs.

[@TheLouisianaHobbyGuy]

I actually have one coming next week on the design of a clock I made for my wife for Valentine's day. You can watch this livestream: kzbin.info/www/bejne/eYavhYZjZ557ecU Skip to 10:49

[@user-to3xq2to8n]

It's out now, Friday 9th February, I downloaded Lightburn to a second PC and it was V1.5. The version on my laptop also prompted for an update to V1.5 when I opened Lightburn. Thanks for your videos they've proved a great help in getting my set up running but I'm still very much on the lower end of the learning curve...!!

[@TheLouisianaHobbyGuy]

I appreciate that, *thanks!*

[@cubansli3099]

Boy,you’re getting fancy with your videos.. Cool Sir

[@TheLouisianaHobbyGuy]

I try, but they're nothing fancy! I'm working on it though!

[@JoepMeijer]

Thanks for the heads up. Now we just have to sit and wait.

[@TheLouisianaHobbyGuy]

You can download the public Beta now if you want Joe. The link is in the pinned comment.

[@JoepMeijer]

@@TheLouisianaHobbyGuy can the beta run beside 1.4.05 or must I delete 1.4.05?

[@Azarathification]

"Mohagony" I died a little inside haha. Great video, looking forward to these, though going to have to pay for another year to get the updates.

[@TheLouisianaHobbyGuy]

No software is any cheaper!

[@dougbennett1275]

Thanks for the preview Rich - something to look forward to. By the way the clocks we have in the UK have 12 markers at 5 minutes intervals. (5 x 12 = 60) not 10. 😊

[@TheLouisianaHobbyGuy]

Yep, good thing I wasn't actually making a clock Doug!

[@northwind7409]

That was a metric clock.

[@UncleRons_3D_Pub]

@@TheLouisianaHobbyGuy 6 minute increments make the day go faster

[@charlesreicks648]

Thanks. Good News

[@TheLouisianaHobbyGuy]

Thanks for watching!

[@i93mcc]

niiice. 10Q for the news !!!

[@TheLouisianaHobbyGuy]

Thanks!

[@Teepaco]

Hey Rich great video as always. While watching your video I'd switch into LB and try that feature. Messing around with the guideline feature I decided to check if it could be rotated like in AI & Aspire, well son of a billy goat! It works you have the ability to rotate the GL any angle you want. Nice upgrade LB thanks.

[@TheLouisianaHobbyGuy]

Yep! They work just like a tool path, well... because they are!

[@zebo-the-fat]

Nice!

[@TheLouisianaHobbyGuy]

Thanks!

[@johncardea837]

Thanks for these updates coming soon. BTW, are you going to make available your lasermatic 10-20-30 watt material library for sale anytime soon

[@TheLouisianaHobbyGuy]

That's the plan! But I'm still verifying all of the settings, and there are a *LOT* of them!

[@soniclab-cnc]

It is pretty amazing what a very small group of developers have achieved with LB.

[@TheLouisianaHobbyGuy]

Yes, and in such a short time with so many different controllers!

[@skratz]

Man, the OCD perfectionist in me has been dying for a taper warp feature!

[@TheLouisianaHobbyGuy]

It's there now!

[@LSEngraving]

great video! I'm working on the galvo updates now!

[@TheLouisianaHobbyGuy]

Link is in the description... thanks Patrick!

[@stewall101]

I've been holding off on paying for a new key to update, but this looks like a good time to take that step. Thanks for the video, Rich

[@TheLouisianaHobbyGuy]

Yeah, this update is well worth the price, for sure!

[@TheBlackDove]

You know you can update for free for one year from activation of a key…

[@TheLouisianaHobbyGuy]

Here is where you manage your license key: lightburn.cryptlex.app/auth/login Renewals are 1/2 the price of a new key.

[@imagineengine]

thanks for another great video as always. I didn't know you have made a lot of clocks. I will have to search through your vids and check them out. Do you have videos that shows how you make them? Thanks again

[@TheLouisianaHobbyGuy]

I've made a few hundred clocks over the years, and filmed a few. Here's the latest one: kzbin.info/www/bejne/bWive4mJgdaFi8U

[@LSEngraving]

My hightlights video and mini-tutorial of the new features for galvo is here: kzbin.info/www/bejne/Z2e5l3ejpJmsZ9U

[@faronmastin8683]

I got mine downloade today.

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@icoff1]

Rick, thanks for the preview... I also downloaded the new version a few days ago. there is another interesting function: if you have two objects on the sheet, try moving one of them by holding down ALT... projection lines will appear to position the object relative to the other...

[@TheLouisianaHobbyGuy]

Yes, I only did the top 10 IMO. When the final release hits, I'll be using this a lot. There are also a few more features with the Alt key.

[@icoff1]

Well... I go to search them...@@TheLouisianaHobbyGuy

[@jerseybigmike2619]

Thanks for the preview of 1.5 -- I will renew my license for some of those features. You mentioned the CUTOUT feature now in the material test -- Yes, it would have been nice before but without the work that you and some others have done and supplied to the community in libraries for materials, the point of the test was to figure out what power/passes cut -- If you where starting from nothign you have no way to enter a realistic value into that. Now you do have ballpark numbers for just about everything. You da Man

[@TheLouisianaHobbyGuy]

Thank you so much @jerseybigmike2619! I really appreciate it! 👍

[@pts5700]

Super. But you did not mention the snap to guideline feature, a great thing.

[@TheLouisianaHobbyGuy]

I didn't mention a lot of things! This was my top 10 list.

[@Alasdair-Morrison]

New Sub here from 🇦🇺 Myself a Fibre laser and hopefully one day Diode laser. Great videos and looking forward to more 👀

[@TheLouisianaHobbyGuy]

Welcome aboard! 👍

[@williamcary168]

An eraser would be gold

[@TheLouisianaHobbyGuy]

It's been suggested William!

[@mikeledee8786]

Good Stuff, Thanks. I wish they made a similar software package for CNC machines.

[@TheLouisianaHobbyGuy]

Millmage for CNC should be available soon from Lightburn Mike. I have the Beta version already.

[@mikeledee8786]

@@TheLouisianaHobbyGuy That sounds great, can't wait. Do you know what they plan to charge for the software?

[@TheLouisianaHobbyGuy]

No I sure don't.

[@dbuttry]

Thanks for the preview! I wonder if the continuous framing will also include the ability to do outline framing like the XCS does with the xTools F1? Also would be nice to be able to "warm up" the IR laser like XCS does....then I can move 100% to LB for for the F1!

[@TheLouisianaHobbyGuy]

I don't use XCS, so I don't know.

[@merrillalbury8214]

I saw a new 1.5 feature video and they also showed the ability to change the radius without getting out of the radius and getting back in with the new settings.

[@TheLouisianaHobbyGuy]

It just keeps getting better Carl!

[@gregself6203]

The new feature I have seen that I like best is the ability to radius curved lines.

[@TheLouisianaHobbyGuy]

Yes, it works on any primitive Greg.

[@skratz]

Released today!

[@TheLouisianaHobbyGuy]

Yep!

[@jeffcrumbley2802]

Hi, Rich. I'm fairly new to laser cutting and engraving (about 6 weeks) and mostly use mine for engraving tumblers and glass drinkware as gifts for colleagues and friends. I'm also currently using the open beta version of 1.5 and love the taper warp feature. While it's really good, it's not perfect. Before engraving, I strongly recommend converting a duplicate of the design to bitmap after using the warp tool, printing it on paper and physically holding it on to the product to be engraved to see how it looks and then make any necessary adjustments to the design (printer paper is much cheaper that a $20 tumbler). I'm sure you've covered this in a previous video, but I felt it was worth mentioning. BTW, I love the tutorials! I have learned so much from you in such a short amount of time. Thank you! Thank you! THANK YOU!

[@cindymccloud7188]

Do you still need the rotary device for tumblers with this feature?

[@TheLouisianaHobbyGuy]

Thanks Jeff, I usually tape paper to the tumbler and run the job at very low power.

[@TheLouisianaHobbyGuy]

Depends on the size of the design Cindy.

[@AcrylicMemories]

Thanks for all you do Please do a GALVO New feature video next Best regards, Rick

[@TheLouisianaHobbyGuy]

My partner Patrick did the Galvo version: kzbin.info/www/bejne/Z2e5l3ejpJmsZ9U

[@AcrylicMemories]

@@TheLouisianaHobbyGuy Oh thanks Ill watch now

[@Fobes]

It is out now! 😊

[@TheLouisianaHobbyGuy]

Yup!

[@TheOtherMisterRogers]

Wow... just downloaded 1.5 and it's killing me that I'm running a job right now and can't play with the new features! Thank you for creating this video

[@madelainemartens4741]

You know you can open a new lightburn window right? You can work at more projects at once.

[@TheLouisianaHobbyGuy]

File --> New Window

[@chriskoehly]

Thanks Rich. FYI the thumb is out the splint, not really useful yet but coming along.

[@TheLouisianaHobbyGuy]

Cool Chris, Good to hear!

[@brandycooper5625]

Thank you for all you do for us with your videos! Do you have a cut library for the WeCreat? I am a member on your website and this is the one laser I was not able to find.

[@TheLouisianaHobbyGuy]

No I don't.

[@brandycooper5625]

@@TheLouisianaHobbyGuy thank you. Can you recommend which cut file would work ?

[@MerleCox]

Thanks for the peek! Just wondering, are you no longer associated with Monport?

[@TheLouisianaHobbyGuy]

Because they stopped honoring warranty parts, among other things.

[@Robbolagger1956]

Hey Rich, Love your videos. But if as you say you make a bunch of clocks, I hope you put that circular array in as 12 points and not 10 as you did in the video 😂

[@TheLouisianaHobbyGuy]

This was an instructional video on Lightburn, not clocks. Had I done all the tick marks, I would notice. I'm very sick... give me a break.

[@steveparry7364]

I just got my laser around Christmas. I downloaded the lightburn 30 day trial before even getting my laser to learn the ropes. Well I got broke before I payed for my lightburn license, and had to get an extension, which also expired before I got paid! And I had to suffer through like 10 days of no lightburn! It REALLY sucked! The laser is amazing, but is essentially worthless without Lightburn! At least unless you are some kind of gcode guru or something! I'm sure glad to have my lightburn license!

[@TheLouisianaHobbyGuy]

Awesome, I'm glad you're back in business Steve! 👍 Thanks for watching!

[@tubehead204]

1.5 Public Beta now available on the Lightburn website!

[@TheLouisianaHobbyGuy]

Link is in the pinned comment!

[@Raynecolwell]

Hi there! Thank you for your videos. Can you show us how to write downwards like you did the word amazing.

[@TheLouisianaHobbyGuy]

I hit return after every letter Rayne.

[@Raynecolwell]

@@TheLouisianaHobbyGuy doh 😂 that makes sense!

[@tanjarodriguez7357]

Hi Rich, I’m super new to Laser anything. Your videos are super helpful. I currently run an embroidery shop. We’re planning on adding laser engraved patches mostly for hats. What version of Lightburn would work with the Wecreate vision ? From what I see in this video I could really use some of the features for embroidery designs as well. Thanks for all your amazing videos.

[@TheLouisianaHobbyGuy]

The Gcode version works with the WeCreat.

[@tanjarodriguez7357]

@@TheLouisianaHobbyGuy thank you 😁

[@skratz]

Taper warp - they made that feature just for my OCD tumbler engraving butt!

[@TheLouisianaHobbyGuy]

Awesome! Have fun with it!

[@reynoldsnegrin7108]

Hey there, does the tape warp work in conjunction with the rotary function? Thanks for all the great content!

[@TheLouisianaHobbyGuy]

That's what it's for!

[@breedib]

Hello, i think lightburn should add an hour counter for the laser machine

[@TheLouisianaHobbyGuy]

Lightburn has a public forum with a place to suggest new features. That's where all the new features come from!

[@jacksanstra990]

RICH, there are 12c sections to get 5 min marks not 10

[@TheLouisianaHobbyGuy]

Good thing I wasn't making a clock Jack!

[@chrisgallaher3899]

@@TheLouisianaHobbyGuy It's a metric clock ready for when we change to metric time LOL

[@1976ClassicCelica]

I wish they had more apply buttons on other options.

[@TheLouisianaHobbyGuy]

Submit a feature request on their website!

[@antoniocarlos21able]

Fantástico Rico, eu fiquei muito melhor em usar Lightburn. Grandes recursos chegando. Recentemente renovei a assinatura com 50% de desconto. Muito bom trabalho. Do Brasil

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@pappukadri]

Is there any 22 watts material list for falcon 22 watts diode laser machine? Regards

[@TheLouisianaHobbyGuy]

On my free forums. lahobbyguy.com/bb

[@johnvon3786]

Rich, did you determine whether the length measurement for taper warp is the logo or the length of the tumbler?

[@TheLouisianaHobbyGuy]

It the measurement from the top to the bottom of the tumbler John.

[@bigmd1343]

Was there any update for changing your workspace from vertical to horizontal? I known in one of the forums posted on the LB site said they were working on it

[@TheLouisianaHobbyGuy]

Not that I know of. You can read all the new feature updates here: lightburnsoftware.com/pages/public-beta-releases

[@geowat2198]

Looking forward to these new features. Thanks for the review. Though this may not be the proper forum, I have a newbie problem. I was working in circular array. I drew a long narrow rectangle and wanted it to rotate around its center point to create a Sun ray looking object. The first time I performed it, it worked as I wanted. After playing around with circular array awhile, I must have modified a setting in it, and now when I try to recreate the original design. The rectangle instead of rotating around its own center point it is rotating around some other center point far away. I feel stupid in asking this but how do I get it back to rotating on the rectangles own center point? Ps what is the proper forum for asking questions like this?

[@TheLouisianaHobbyGuy]

I have a clock video posting next week that will answer this question.

[@gregself6203]

The ability to label material tests or add comments inside the new frame would be handy.

[@TheLouisianaHobbyGuy]

Agreed! You can post a feature request on this website Greg.

[@KevinKearney100]

Hi Rich. Would you consider making a video of the back of your coins and how you line them up do you just leave them plain or do you make them the same as the front with raised letters I’ve mess so many up though not aligned. Yes I am a fussy log git. 😂😂😂

[@TheLouisianaHobbyGuy]

Yes Kevin, it's on the to-do list.

[@tonyrackliff2003]

Hey Rich,I got the 30w for Christmas. The library seems way off. Do you have a 30w version available?

[@TheLouisianaHobbyGuy]

Yeah Tony, that was Dimitry's version, and it's off by a lot. I'm finishing up a 10, 20, 30W combo library now, but it's taking time since I have to verify ever one of the settings on the laser. That's a lot of work!