Not just like a Bending Machine / Straightening / Press

[@sethwiles1255]

Incredible work! And thank you so so much for no unnecessary music or commentary!!!

[@TheMetalist]

Thank you 😊

[@runsolo7418]

Exactly! Let me listen to what I like, while I watch the DIY bending machine come to life.

[@Syncopia]

This guy is not only an artisan level craftsman but a talented engineer.

[@TheMetalist]

Thank you 😊

[@rogerbrandt6678]

@@TheMetalistI’ve ran brakes for years, you could make a smaller bottom die for a tighter bend, or even put a smaller piece of angle iron in and your radius will be a lot tighter.

[@oneproudbrowncoat]

​@@TheMetalistHi, which burrs were used at min 1:53?

[@TheMetalist]

@@oneproudbrowncoat it's a copy burr from Pferd

[@paulnewton943]

It's refreshing to see people still know how to work hand tools. And well! Nice tool 😘

[@TheMetalist]

Thank you 💪😁

[@bobmcdougal7501]

You consider a Tig welder, drill press, and mag drill to be a hand tools?

[@nickarcher8617]

Awesome. I need exactly one of these. I've been following a long time. Im really glad to see how you've grown from building your own bench to where you are now. This is an awesome custom tool.

[@phoschnizzle826]

Outstanding design! The versatility of this unit really shines through.

[@MikeYurbasovich]

I like your bender. Also a crafty guy, I appreciate the work of others. You do a lot with very little.

[@trashes_to_treasures]

I know that someone is a master of their craft when I come back from time to time to re-watch their videos just to enjoy seeing beautiful products come to life, beautifully filmed and edited.

[@MichaelGraham-i5q]

Beautiful. A real pleasure in watching you work. All the small details, chamfering the holes and edges. Neat tool for breaking the edge on your slots too. Great bender, great work. Thanks.

[@Factory400]

It is this moment where I am most thankful for my CNC milling machine 😂 Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.

[@barrylinkiewich9688]

Same, I'd have done a whole bunch of this on the laser at work while sipping a drink. I don't wanna work this hard haha.

[@mcamodell]

BASIC tools?!?!? WTF? There nothing basic about those tools, you cannot even FIND those in a normal hardware store

[@lainethm]

@@mcamodellThose are not basic consumer tools but pro grade tools. I think @Factory400 ment hand tools.

[@mcamodell]

@@lainethm "Amazing outcome with basic tools"

[@MillerBSAA]

Oh Mann, einfach geil! Ich bin gerade an 2 Projekten von dir am Nachbauen und jetzt kommt das nächste Ding auf meine Wunschliste. Ich hab schlossern als Hobby angefangen und deine Pläne sind echt dankbar für Noobs wie mich ;) Ich lern echt viel dabei und es macht Spaß. Und vor allem wenn man es selber macht, merkt man erst wie viel Arbeit das ist. Auf jeden Fall, danke für deine tollen Projekte!! Du tust dir da echt was an.

[@TheMetalist]

Vielen Dank 😊 Ja ist ja auch mein Hobby 😁

[@boko.youtube]

Love it - we made a small press for bending inside corners on letters - but it is hydraulic - this is a great project! I will use it as inspiration for the next build for sure!

[@TheMetalist]

Thank you 😊

[@465maltbie]

Nicely done and well thought out, thanks for sharing. Charles

[@TheMetalist]

😊

[@Branhawk]

Your an absolute wizard, very nice.

[@artyfarty87]

When he turned it upright & used it as a press break........................I literally can even!!!! 🤯👌

[@TheMetalist]

😊

[@tereg5]

I bought your welding table build plans and it was great step by step. I've been searching the web trying to find a good drill tap set. Can mention what taps you use and counter sink bits you use in your builds. Your fabrication builds are the BEST I've seen. Thanks for sharing your builds with the world 🌍🙌

[@sams5803]

That mag drill is soo compact. Man the ones I've used were 3-4 times the size

[@ПасенкоФедор]

@Factory400 12 часов назад It is this moment where I am most thankful for my CNC milling machine Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.

[@d.bcooper7819]

Perfection. I am a flooring guy and I wasn’t able to take my eyes off the screen. Thank you so much for the excellent editing!

[@wagoyokonibaouattara3767]

Salut le BOOS . vous êtes super grave . merci pour le bendeur à mollets multiples. Big j'aime ! W

[@FlorianBeck_762]

Schade das nicht jeden Sonntag ein Video kommt mit geilen DIY Sachen. Wieder einmal eine geile Vorrrichtung die du da gebaut hast 👍🏻

[@TheMetalist]

Ja jede Woche das wäre schön vl klappt das irgendwann mal 😉

[@JohnDoe-rx3vn]

I like that you brazed your channel name into the table

[@pamdunn8454]

another brilliant design , an idea came to me when you upended the machine "vertically" this would work perfect for (dimple dies) i will be constructing one for myself in the future , thanks for sharing

[@TheMetalist]

Thank you 😊 Awesome send me some pics if it's ready 😁

[@svenjudge9347]

Einfach nur geil dir zuzusehen. Das ist ganz tolle Handwerkskunst und super um sich Inspirationen zu holen👌

[@TheMetalist]

Vielen Dank 😊

[@daniel635biturbo]

Fantastic, you always do complicated things with basic tools and very well thought out construction !

[@joshuacaylor881]

Your technique is spot on. Excellent craftsmanship 💯

[@matthiaslange392]

Allein die gleit-Führung mit Gewinden drin ist eine super-Idee. Da könnte man mit extrem wenig Aufwand eine Rollen-Biegemaschine draus bauen: 2 Rollen anstelle des "V-Amboss" und eine Rolle statt des beweglichen "Hammers" (keine Ahnung wie ich's ausdrücken soll). Dazu zusätzliche Gewinde in den Grundkörper in der Nähe des Hebels. Da könnte man dann eine Halterung mit Schraube als Press-Spindel befestigen um die bewegliche Rolle Richtung fester Rollen zu drücken.

[@TheMetalist]

Vielen Dank 😊 Ja das stimmt dachte mir auch schon sowas bloß die Idee mit dem gewinde die hatte ich noch nicht 😅 aber da kann man so viel verschiedene Matrizen bauen. Vl mach ich noch eine teil zwei für in dem ich mal alle Ideen verwirkliche 😅

[@dougmorgan6616]

You've got some really cool toys, and good ideas.

[@DT-jz3wn]

Damn you! I love it. You have made me want something that I didn't know I needed.

[@Lorbuverse]

Don't be sure if i like more the simple design or the functionality. Great project 👍 Just to the right time on a sunday evening a good movie...this is what it takes 😆 I am excited what's up next 🙌

[@TheMetalist]

Thanks you 😊 nächsten zwei Projekte werden etwas einfacher😅

[@jacobspeas68]

Why did I watch this?! 😂 I now see more tools and bits I need to buy. My wife is NOT going to be pleased. Really nice work!! Thanks for taking the time to show us. I’ll see if I can put it in the mix for this Summer’s projects.

[@TheMetalist]

Awesome, thank you 😁

[@kratanicverses4805]

Your skills are simply ridiculous. Well done sir.

[@TheMetalist]

Thank you

[@silvergrizzly316]

Dirk, there is no stopping you, my friend!!! 🫵r #☝️ Awesome Invention!!!👌 👏 👍

[@TheMetalist]

Thanks a lot Silver😊

[@manfredmuller2925]

Du machst wirklich klasse Werkzeug, klasse und pragmatisch

[@TheMetalist]

Vielen Dank 😊

[@cuddlybear4524]

I don't know why this channel wasn't recommended to me sooner. KZbin owes me an apology.

[@TheMetalist]

😅👍

[@construedcustomz5839]

For real

[@dozer69643]

I second this!!

[@TheRay280]

🎉🥳💪🏻👍🏻 wieder geil, das Video und das Ergebnis. Jetzt kann ich gut schlafen 😁

[@TheMetalist]

Vielen Dank 😊

[@rickfazzini22]

Awesome bending tool, I fully plan to make one of these! Thanks for sharing

[@907jl]

Very clever, and well done!

[@TheMetalist]

Thank you 😊

[@chrismayer8990]

Coole Idee. 👍Spiele seit längerem mit dem Gedanken mir eine Zahnstangenpresse zu besorgen. Das scheint ne tolle Alternative zu sein!

[@TheMetalist]

Vielen Dank 😊 Zeichnungen will ich auf Dienstag fertig haben. Bin gerade noch dabei ein paar sachen zu verbessern 😁 Grüße

[@SStradivarius]

That is so smooth! I like your designs cause they just work so many ways👌🏻 Metalist you are the beast😎!

[@TheMetalist]

Thank you 💪😊

[@boltonky]

Awesome work and good show of skills and thought :) - keep it up One day i hope i live somewhere were tools and materials aren't so expensive that I can do projects or have fun making stuff without the thought of the repercussions of not having food or a roof over my head (Life can be hard but doesn't mean not to dream)

[@drew6761]

Someone get this man a Bridgeport!! Bravo my friend. Great work!

[@heckyes]

What is a Bridgeport? I dunno if that's a tool or like a fancy drink?

[@erik_dk842]

@@heckyes A professional milling machine - knee mill

[@MikeYurbasovich]

​@@heckyesIt's an engineering tool, really. If you have a bridgeport and a lathe, you can build all kinds of machines like I do.

[@Vikingwerk]

Almost a sideways arbor press! Neat!

[@ctpctp]

First off - AWESOME build!!! Secondly - DANG I am glad I own a mill 😀

[@Jimmy_McGinty]

Gefällt mir immer wieder sehr gut was du machst.

[@TheMetalist]

Vielen Dank 😊

[@Sp1der44]

Brilliant design. Great video! 👍

[@GeorgeAlex-j6k]

Very well put together.

[@aleksandarbogdanov303]

Show off :D - хаха Btw - nice work man. Good for you. You are a true craftsman. Respect !

[@TheMetalist]

Thank you 😊

[@michaelbyrnes7944]

Beautiful love it

[@peterkohm9742]

Beautiful work

[@TheMetalist]

Thank you 😊

[@ElleSpirito]

Cool, das schreit eigentlich nach einem käuflichen Bausatz! 😊

[@fabientuizat1129]

merci beau travail !!

[@TheMetalist]

Merci 😁

[@Justforfun-ek7et]

Always enjoy watching your work!

[@TheMetalist]

Thank you 😊

[@m.a.jr.689]

Großartig Maestro 👌👍💪👏👏👏👏

[@TheMetalist]

Vielen Dank 😊

[@Dusto5]

Awesome and thank you!

[@alanmony1582]

BRILLIANT as always!!

[@nahuelramirez3940]

GREETINGS FROM ARGENTINA! CONGRATULATIONS

[@jmckittrick1]

Amazing. As always. Great work

[@TheMetalist]

Thank you 😊

[@tedan8116]

As usual, magnificent job 👏🏼🫡

[@EdwardRoss-tb5hz]

Great tool, good job thanks for sharing.

[@rozeala]

Vraiment top ! bravo et merci ...

[@joshtheis69]

That was awesome bro Way cool

[@jasonw2696]

Cool tool!

[@Junkboy888]

Nice tool great video.

[@mrMacGoover]

I love that third ✋. 👍😄

[@Lwimmermastermetalart]

Well done! Especial since you don’t use a milling machine to fabricate. One comment. Use a tapping fluid.

[@TheMetalist]

Thank you 😊 yes i missed it for a couple of sec 😅 but the bit is still good

[@michaelmetzner3981]

Hello Dirk, once again great work, I'm thrilled! Best regards, Michael

[@TheMetalist]

@@michaelmetzner3981 vielen Dank...hab dich nicht vergessen 😉

[@AndrossUT]

The man has to be doing stuff infuriating on purpose. He literally just took a piece off the drop saw and then cut the miter with an angle grinder right after. Sweet Jesus

[@AndrossUT]

Also straight up welding and cutting that tube just to use as a fence...

[@pferdtools]

Such a cool project, well done! 👏

[@TheMetalist]

Thank you 😁😉

[@JokerInk-CustomBuilds]

Nicely done!

[@TheMetalist]

Thank you 😊

[@zachdaniels8112]

This is legit. Nice job, dude!

[@danyecm]

this guy is a treasure!! amazing job, amazing skills, amazing everything... thanks for sharing and teaching. Saludos desde Mexico mi hermano

[@alexwbakker]

Definitely interested in build plans when this hits etsy.

[@TheMetalist]

Thank you 😊 Plans are online

[@cb9custom173]

great job

[@Sean_y4k2l5]

What a brilliant video! thank you

[@firstmkb]

I came here after seeing your welding table build and now I want some HAND tools!

[@pureexpanse]

Interesting project.

[@TheMetalist]

Thank you 😊

[@drpipe]

Great work as always Dirk... Just a thought you could put a crank handle and 2 fixed bearings to make a radius roller.. I know you have a dedicated Heavy duty one.

[@TheMetalist]

Thank you 😊 Yes not the first one who mentioned that

[@RayRaysRippin]

That things legit to have bent that last piece.

[@khaled4282]

Well done

[@TheMetalist]

Thank you 😊

[@johndeninger8905]

Great video, thanks 👍👍👍

[@renegade1520]

Pretty slick! Very useful too!

[@retiringrenegade9874]

Well done Brother!

[@TheMetalist]

Thank you 😊

[@__lancaster]

Outstanding.

[@TheMetalist]

Thank you 😊

[@Gaston12345]

Nice tool! Unfortunately I cannot build one myself as I don't own a laser engraver!

[@TheMetalist]

😅😂👍

[@Ray-gy7tt]

Great video, always love watching the work you do. What tool is it that you used to chamfer the edges iv never seen one of those for a die grinder before.

[@beastwolf7]

This is awesome

[@TheMetalist]

Thank you 😊

[@Panzernarium]

Nice!

[@tonypitsacota2513]

Wow... That's a lot of work for a 30 second slot. I hear Bridgeport calling your name!

[@Turco949]

If nothing else, I'd have given you a thumb up for that hammer alone!

[@TheMetalist]

Thank you 😊

[@БорисБорисович-м7л]

Great. You can use this press to bend 2mm metal with a height of 200mm

[@jesusmarte1880]

Excelente Fabricación de muy alto nivel

[@TheMetalist]

Merci 😁

[@mrMacGoover]

You should make a depth set and lock for the handle and three roller wheels and a hand crank for the roller wheel on sliding mechanism For rod and flatstock rolling.

[@TheMetalist]

Thats a nice idea 😉😊

[@Failure_Is_An_Option]

That sixteen minutes felt like an hour. Had my brain going 100% the entire time. I very much like the lack of music and unnecessary narration. I mean you could talk... but some people really like the sounds of their own voice.

[@brentjenkinsdesigns]

Well Done!

[@timvw01]

Great! Subscribed

[@cowkllr83]

install roller bearings on the tooling you used to make the hoop and a crank handle, and you could roll steel. awesome stuff sir.

[@0wl999]

The only flaw i can see, from a engineering/physics standpoint is the c channel arm where you mounted the long handle to, may spread or widen out due to the ' lever effect '.

[@hansnoeldner1861]

Very impressive!

[@rob-vz4wt]

Nice! Now it's time to build one that will bend full size sheets of steel!

[@OffTheGridHomesteadCostaRica]

Wow...this is awesome. I would love to build one of these...but gonna have to get some of those great tools in order to do it!

[@lanzer22]

I’m very disappointed that Bender from Futurama was not featured anywhere in this video.

[@pjz7088]

Definitely needs to slap on a Bender sticker for the next video

[@TheMetalist]

Yes a bender looks like Bender 😂🫣

[@bryanjones7126]

Outstanding project! Great work and thank you.