BIG, Functional 3D Printing Projects To Stay Busy All Winter

  Рет қаралды 91,289

The Next Layer

The Next Layer

Күн бұрын

Пікірлер: 184
@thenextlayer
@thenextlayer Жыл бұрын
OH HEYYYY! Thanks so much for watching. I genuinely hope you loved this video... and if you did, there's no better way to let me know than by liking, commenting, subscribing, and all that stuff. It REALLY makes a difference. THANKS!
@josefdahari
@josefdahari Жыл бұрын
Am Israel Chai 💕 how's that 😁
@SHARONKEEF_FkR_justice4john
@SHARONKEEF_FkR_justice4john 10 ай бұрын
I sure would love a printer
@impulse0341
@impulse0341 Жыл бұрын
Coming from a wood working background, you should NEVER make a crosscut on a table saw like you are in this video, free hand. You are asking for at least a kick back and at worst a whole lot worse. Use the miter gauge, or build a table saw sled.
@thenextlayer
@thenextlayer Жыл бұрын
Thanks for the tips. I don't even know what a cross cut is... so let me figure that out, and then I'll look into the stuff you shared. Thanks
@thenextlayer
@thenextlayer Жыл бұрын
K yeah I watched a video and you're totally right, thanks for saving me :)
@NotATrainedProfessional
@NotATrainedProfessional Жыл бұрын
The first thing that came to mind for me too
@banditboy1
@banditboy1 Жыл бұрын
@impulse0341 thank you for your advice. Also thank you for no screaming at him for it but instead trying to teach. A lot of people just call people stupid for doing something wrong but never give actual advice. Glad to see someone else other than myself actually gives advice instead of calling people stupid. :)
@kylemccabe6578
@kylemccabe6578 Жыл бұрын
I’m glad that this was brought up. Honestly, the “safety police” that find their way into the comment sections of woodworking videos are a pet peeve of mine. But since this is a different demographic that is less likely to have experience with woodworking tools, I felt compelled to say something. Glad you beat me to it. And I’m also glad that it was done with some tact. 👍
@Antstar12
@Antstar12 Жыл бұрын
Definitely do a full video on the ERCF. You should also take a look at the Filametrix Voron mod for the stealth burner if you don't want to deal with tuning the retraction for clean filament ends. That mod basically implements a filament cutter similar to the Bambu Labs printers, so there's a bit more waste but much less hastle.
@thenextlayer
@thenextlayer Жыл бұрын
Wow I had no idea, I'll check it out :)
@thejurassicgameroom9344
@thejurassicgameroom9344 11 ай бұрын
Largely thanks to this channel, and a few buddies on X(twitter). I have now started printing! And after 1 day, I am 6 prints in and 7 is about 47% done. So I just wanted to say thanks for the new hobby, and I am excited to continue this journey.
@georgedunn7573
@georgedunn7573 Жыл бұрын
+1 vote for the ERCF video, full build and in depth setup is a must for this thing lol Love all the content, stay safe over there.
@DanielSanPedro
@DanielSanPedro Жыл бұрын
A massive yes on a full video of the enraged rabbit unit. Also, I’m a perfectionist just like you, so those little things that no one else will notice… are an eye sore for me. I understand lol
@jefferygrantham5582
@jefferygrantham5582 Жыл бұрын
You know you didn't have to even ask if we wanted that video on the DIY MMU. Yes, please and thank you! Appreciate all the work you put into your videos.
@thenextlayer
@thenextlayer Жыл бұрын
I'm actually SHOCKED how interested people are in it... there are so few videos online, and the ones that exist didn't seem to do well... but I hear you guys. I'll do it!
@Guy_Sandler
@Guy_Sandler Жыл бұрын
​@@thenextlayermmus are expensive so if we can find a way to get it for cheap that would be amazing
@Agamemnon2
@Agamemnon2 Жыл бұрын
Really liking the effect of the colors across the embossed hexagon tiles, there's just enough relief there to catch the light in quite a nice way.
@thenextlayer
@thenextlayer Жыл бұрын
Thank you! Cheers!
@cfmendez
@cfmendez 10 ай бұрын
Check out the new Multiboard, much better and vesatile than the honeycomb wall
@kspec2001
@kspec2001 Жыл бұрын
great video. just some advice for the viewers who are fairly new to using power tools. DO NOT crosscut on a tablesaw without the mitre gauge, especially if the material is more than 1 inch. (also dont crosscut material while using the fence and mitre gauge at the same time)
@thenextlayer
@thenextlayer Жыл бұрын
Yes! This! A lot of folks have commented, and I've since done a youtube dive and learned better. Thanks, giving you a thumbs up so people see this! DO NOT learn tool safety from my videos.
@kspec2001
@kspec2001 Жыл бұрын
@@thenextlayer np! kickback is real! seen some incidents before that could of been prevented, just wanted to share some information. :)
@macymakes3d
@macymakes3d Жыл бұрын
Thanks for the shoutout lol. After the holidays I'll start looking into the reprack system to save myself some floor space. Hopefully my husband won't mind me drilling a bunch of holes in the walls 😬
@brianswille
@brianswille Жыл бұрын
Another great video. THank you. Hope you are your family are keeping safe!
@TheTechnoaddict
@TheTechnoaddict Жыл бұрын
You seem to have layer shift in all the print timelapses you showed. Love the look of the wall.
@Nigel_Tufnel_11
@Nigel_Tufnel_11 Жыл бұрын
...And a lot of stringing. Those timelapses looked terrible.
@Anapriev
@Anapriev Жыл бұрын
what is the reason for the print shift? I recently had this happen at a 6 o'clock press. Share your experience!
@TheTechnoaddict
@TheTechnoaddict Жыл бұрын
@@Anapriev z-wobble, slicing fault, ... could be many things.
@hicamajig
@hicamajig Жыл бұрын
Should check out multiboard, seems like a promising new storage solution
@tenchuu007
@tenchuu007 Жыл бұрын
Ooof, those layer shifts on the X1...
@olipitt12
@olipitt12 Жыл бұрын
tip for gridfinity, dont glue the base down but use a small blob of Bluetack (UK) idk any alternatives in other countries unfortunately, but its a reusable sticky putty of sorts which will allow you to adjust the baseplates but hold them firmly in place 12:00
@MallocArray
@MallocArray Жыл бұрын
I certainly want a video on ERCF. I haven't seen much coverage about it in light of all of the other AMS options, but would like to have an option for my Voron Trident
@JacksMacintosh
@JacksMacintosh Жыл бұрын
The panels and the set turned out great!
@NavyPix3l
@NavyPix3l Жыл бұрын
Yes yes yes on a MMU video 👍🏻
@thenextlayer
@thenextlayer Жыл бұрын
Wow, I'm surprised how much interest there is!
@life_motived_corey
@life_motived_corey 8 ай бұрын
This video is something I was looking for. Found you on the first go.
@greggem
@greggem Жыл бұрын
100% yes on the MMU video! I love my Bambu Lab AMS, but I'd much prefer an open-source option so I could tinker (more). I really like the videos where we get to see how a project fared after months of actual use as well, e.g. what improvements you might make if you were doing it over from the start. The tip about printing the honeycomb with PETG as the support/divider as opposed to Bambu Lab support PLA is something that I actually wrote down for future reference, which is the highest compliment I can give. Thanks!
@thenextlayer
@thenextlayer Жыл бұрын
Nice, I'll do it! And that's good feedback. I tend to publish a video right after i finish a project, but you're right, maybe worth holding off a while
@kaytrim
@kaytrim Жыл бұрын
I want to add my support for the enraged rabbit videos. On the topic of long term use of projects. An idea would to still have the intro video but have a follow-up that can cover long term results on several projects. I am interested in a follow-up on the modular enclosure. I even backed that Kickstarter after watching your video covering the project.
@shadir007
@shadir007 Жыл бұрын
💯 ❤🙏🏾
@amogusenjoyer
@amogusenjoyer Жыл бұрын
Is the mmu3 fully open source? Or even partially?
@nitmar5
@nitmar5 Жыл бұрын
Definantly interested in the ERCG, would be a fun project to tackle for my Sovol SV05!! Love your channel, Thank you for all that you do!!!!
@Tomro82
@Tomro82 Жыл бұрын
Thanks for the ideas Jonathan, greetings from Haifa❤
@dayworkhard
@dayworkhard Жыл бұрын
Thanks for sharing. Awesome channel!
@danyveilleux3864
@danyveilleux3864 Жыл бұрын
It was great. Projects with only 3d printing. No laser cutter, wood engraver or other equipment that I cannot possess in my limited environment. I think I will start printing those gridfinity for the kitchen. My next project. :)
@CyberBobCity
@CyberBobCity Жыл бұрын
Macy Makes 3D is such a great channel!
@thenextlayer
@thenextlayer Жыл бұрын
Agreed, I'm a fan! Anyone who can juggle young kids + a KZbin Channel + a business is a superhero in my book
@asmith7966
@asmith7966 Жыл бұрын
12:31 Hello from the bottom right corner :D Very cool to see my creation in a youtube video at all
@LayerbyLayerOfficial
@LayerbyLayerOfficial Жыл бұрын
Would love to see the MMU video! That sounds amazing!
@thenextlayer
@thenextlayer Жыл бұрын
You got it!
@ericjones8289
@ericjones8289 Жыл бұрын
Very impressed!!!
@Jens_JV
@Jens_JV Жыл бұрын
Would love to add multi color to my Ratrig so, 100% interested in the ERCF video!
@Davidlynx
@Davidlynx Жыл бұрын
Yeah, I would love to see your ercf video!
@MrGerhardGrobler
@MrGerhardGrobler Жыл бұрын
Thanks a lot! Started printing defusion panels, not to dampen sound, our 8 dogs are loud, but to regulate the background of my video recordings. They look pretty, and easy to mount on a movable background wall. So I can pack away my studio when not needed. I produce a video once every 4 or 5 months when I am being prolific...
@jeremypalmer9028
@jeremypalmer9028 5 ай бұрын
Please do a full video on Enraged Rabit, I was thinking of doing on for my SV08.
@thenextlayer
@thenextlayer 5 ай бұрын
It’s already out
@Vbeck56
@Vbeck56 Жыл бұрын
Omg please do a ERCF video!!! I’m really curious and there aren’t many videos about it
@thenextlayer
@thenextlayer Жыл бұрын
Vote counted!
@phillycheeseman
@phillycheeseman Жыл бұрын
My ERCF has been sitting staring at me wanting to be assembled - pls do a few episodes on this - it would be helpful!
@thenextlayer
@thenextlayer Жыл бұрын
You got it!
@johndamigos3833
@johndamigos3833 11 ай бұрын
Definitely we want full video of multi material if that possible.... I just purchased one!
@Xanderzzzzzzzzz
@Xanderzzzzzzzzz Жыл бұрын
I LOVE THE CGP GREY REFERENCE!
@pipdesignshop
@pipdesignshop Жыл бұрын
Full video on ERCF project!
@thenextlayer
@thenextlayer Жыл бұрын
Coming soon!
@chrispritchard7977
@chrispritchard7977 10 ай бұрын
I feel like you need to mix the hexgon sound panels with hexagon modified versions of the wall mount grids. Then you could place a grid randomly within the sound panels.
@tinkerman-q
@tinkerman-q 2 ай бұрын
I am definitely interested. Now that I setup my wall rack, it's possible to do MM. I tried my hand with some simple manual MM and orca Slicer and OMG, how just small little details can make a piece look something else. Seriously, 6 30 seconda long swaps and bam. Shiny. By the my way. My rack is made of 2m 15mm steel tubes used in heating because you can't beat this cost (4 euro) and just designed filament spool mounts to attach to it that roll over cheap ball bearings (that I harvested from old V rollers)
@goatmodegaming
@goatmodegaming Жыл бұрын
This is exactly what I need, I’m kinda burnt out. That is literally the best looking Voron I’ve seen btw
@thenextlayer
@thenextlayer Жыл бұрын
Thanks!
@bjaurelio
@bjaurelio Жыл бұрын
Those diffusion panels look cool, but they aren't going to do much acoustically. The shallow wells are only going to affect high frequencies, and the lack of variation in depth/angles means what frequencies it does affect, it's going to scatter uniformly.
@thenextlayer
@thenextlayer Жыл бұрын
Damn. I was worried about that. Though, I do think that BEHIND me, the aesthetics are more important than the acoustics, since I'll be with my back to it... but yeah, I probably should choose a different design for off-camera to improve it. Thanks for the comment!
@timreeves
@timreeves Жыл бұрын
@@thenextlayer As a sound engineer, I can confirm that these won't do anything for sound and your impressions are most likely from a will for confirmation bias (no hate! a very reasonable and expected belief, you'll see this time and time again with people that buy expensive boutique hifi cables, which realistically change nothing), and even going deeper or more varied with the angles, they still aren't going to come close, diffusion is also not what you want for inproving acoustics, you want absorbtion, panels to achieve this are achieved with things like thick rockwool matting. But, please do video on the enraged rabbit! i'm very interested in seeing complete and functional versions of this system!
@goatelope7539
@goatelope7539 Жыл бұрын
Great recommendations
@kiserleti4d4s
@kiserleti4d4s Жыл бұрын
my previous workplace I worked with mmu2s and realy intrested in the carrot feeder. Should I invest in it for home.
@zachoaks2424
@zachoaks2424 Жыл бұрын
First off, YES on the MMU full video. Second off, do you need AMS to print the hex wall stacked? or can say an Ender 3 print them stacked as well? I know that AMS has a ton of features I know nothing about.
@bjorngitter
@bjorngitter Жыл бұрын
How do you do the stacking? I tried to see, if I could do this for some boxes I'm printing, but could figure out how to add parts three dimensional.
@Gnew111
@Gnew111 Жыл бұрын
Hey I’m a Voron fan boy and would totally be into open sourced content including ERCF enraged rabbit carrot feeder. Enjoying your content a lot!
@Defyant123
@Defyant123 Жыл бұрын
Only 160 rolls :) i wish.... 300+ for us and i had to come up with my own idea for custom racking :) ikea delivered again! Deff going to do some of those panels after steeling your full honeycomb wall idea :) love the vids 👍
@thenextlayer
@thenextlayer Жыл бұрын
wow, jealous. That's sooooo much filament lol. I use it up too fast to accumulate like that.
@RisingApe
@RisingApe 11 ай бұрын
Yeh, this is a fair take, like most hobbies there is a whole terminology to break through first.
@caste1200
@caste1200 Жыл бұрын
for the panels, if you are printing multiple at a time, then it's not vase mode is it?
@thenextlayer
@thenextlayer Жыл бұрын
nope just 1 perimeter
@carltonwbrooks
@carltonwbrooks Жыл бұрын
Chag Sameach Hanukkah to you and your family. After printing my Hanukkah decorations, I sat down and watched this video. I have 60 more honeycomb wall panels to make. I did not know that you could stack them. Can you please explain the process or point me to a Bambu video on how to do it. Shalom.
@danpowell2018
@danpowell2018 Жыл бұрын
Gimme some of that full length open source mmu action!
@arthurtorricer4544
@arthurtorricer4544 Жыл бұрын
Can you please do a review on the Enhance Bambu Labs Hydra Pro AMS holder on Printables. I know your creating new spool holders with auto rewind.
@JesseFuller
@JesseFuller Жыл бұрын
Please do a video or two on the ERCF and some of the mods for it. Maybe some time spent on macros and filament tip shaping.
@willofthemaker
@willofthemaker Жыл бұрын
Your thumbnail game has really been on fire recently
@thenextlayer
@thenextlayer Жыл бұрын
Ha, thanks, I've been using AI actually ;)
@willofthemaker
@willofthemaker Жыл бұрын
@@thenextlayer good tip! Might need to try that myself. Thought they looked incredible and very creative
@servant74
@servant74 Жыл бұрын
Question: What is the technique for 'stacking' prints?
@ubiratamuniz
@ubiratamuniz Жыл бұрын
although here in Brazil holiday seasons are actually summer, I already started the honeycomb wall project for my 3D printing room. Been printing wall modules (I´m using parametric version 2) for the last week. There´s a jig on Printables you can use to drill the holes for it more accurately. I like the idea of stacking the prints to save time! (some prints tend to end in the middle of the night so the printer is idle until I wake up LOL) Maybe it would be interesting to make a video on the subject, with tips and tricks on how to do it properly using OrcaSlicer. Still have to repair the resin printer (LD-006) in order to get rid of it, LOL. No more resin for me. Living in an apartment, I don´t have room for THAT much filament LOL. No more than 10 rolls at a time. But I´m working on something to put them in the shelf over the printer (direct drive) so I can feed them directly. Probably there´s already a ready made solution (I don´t want the TUSH filament roller, didn´t care much for it when I tried). Will look for it after the honeycomb wall is complete. (Edit: Just checked the RepRack and it´s usable on desktop as well, so... YAY!!!)
@thenextlayer
@thenextlayer Жыл бұрын
Nice, enjoy! Thanks for sharing / commenting :)
@TS_Mind_Swept
@TS_Mind_Swept 11 ай бұрын
How exactly does voz mode work with multiple prints? 🤔
@michaelsvizher1468
@michaelsvizher1468 Жыл бұрын
The solution for the wall mount is, give some freedom to the bolt in the mount, make the whole elliptic and Hexagon will solve the problem of direction
@THEREALSAZMAN
@THEREALSAZMAN Жыл бұрын
Keen to seen an ERCF video
@dwightrigel4611
@dwightrigel4611 Жыл бұрын
I’m a form believer in form follows function. I think you would have gotten better sound diffusion w the more aggressive panels. I understand the shadow thing though I think that could have ended up looking neat w some smart lighting.
@Jerrie-Lenore
@Jerrie-Lenore Жыл бұрын
YES! Open source filament changers!
@nickpepper4592
@nickpepper4592 Жыл бұрын
Bro I've been looking for multi material solutions. Show me what you have done. Please
@Jay-ro5wc
@Jay-ro5wc Жыл бұрын
3M command strips can hold a lot of weight. I'd just print the wall tiles with a few flat rectangular sections on back where I could stick the strips.
@thenextlayer
@thenextlayer Жыл бұрын
There's a model for that, but somehow I don't trust them not to pull the paint off the wall.... it's happened before.
@SKPhoto816
@SKPhoto816 Жыл бұрын
Definitely do a video about the MMU. A lot of us Ender 3 owners want to do it so we don't have to buy a new printer
@lilithcal
@lilithcal Жыл бұрын
Just curious as to how you attached the panels to the wall? Screws? Adhesive? Tape?
@thenextlayer
@thenextlayer Жыл бұрын
Gorilla brand double-sided glue!
@lorenzobortolin1112
@lorenzobortolin1112 Жыл бұрын
Can someone please tell me if there's a way to use the honeycomb wall storage without screwing it to the wall? I can't put holes in the wall
@thenextlayer
@thenextlayer Жыл бұрын
There are versions of the mounting block that work on command strips.
@vash469
@vash469 Жыл бұрын
where can I find the stacked honeycomb stl at
@Lisa-pb7xj
@Lisa-pb7xj 6 ай бұрын
I think i now need an entire rainy month and like 50 kilos of filament
@HFR_SpartanFred
@HFR_SpartanFred 11 ай бұрын
I miss summer 😢
@RealShebang
@RealShebang Жыл бұрын
The sound panels idea is neat, but I think it has the same problem as the big "3d printed enclosure" project -- unless you are getting your filament for free (and we ain't), it'll just end up costing much more than actually buying panels off of amazon. Neat idea, might have some niche usage -- like if you only needed a small area covered, but the wrong tool for the job.
@thenextlayer
@thenextlayer Жыл бұрын
That's true. I did the math, and it was about 30% more expensive than buying panels off Amazon - but the panels on Amazon didn't meet my style requirements!
@MarieLuiseOrland
@MarieLuiseOrland Жыл бұрын
yes please videos about multi material systems. I often think about it especially with all this bamboo printers on youtube. And I really don't want a closed source printer but multimaterial prints.
@thenextlayer
@thenextlayer Жыл бұрын
You got it :)
@isaacbarlow1432
@isaacbarlow1432 Жыл бұрын
great video, new sub but love your content
@thenextlayer
@thenextlayer Жыл бұрын
Awesome, thank you!
@FreedomToRoam86
@FreedomToRoam86 4 ай бұрын
In response to your initial question of wanting to hear your own voice or not, I can help you out. I love listening to my own echoes. If you were fortunate enough to hear me, you’d have another project: a set of panels that specifically echo my voice, while in the shower. For reference, I sound like the best parts of Pavarotti, Bon Jovi, and Johnny Cash. (Or a sick coyote according to my wife). I am sure it would be very popular, although my wife and kids don’t seem to agree. I can’t wait to see how the panels come out! I think they will be a hit, the next Dre headphones killer product. Let me know when you are ready to license them! 😂
@sixko3573
@sixko3573 Жыл бұрын
Do you have any videos on how to print things stacked? That seems like a very convenient way to print things
@thenextlayer
@thenextlayer Жыл бұрын
Check my previous video about the honeycomb tool wall
@DavidCousins
@DavidCousins Жыл бұрын
Yes do a video on ERCF
@thenextlayer
@thenextlayer Жыл бұрын
Wow, can't believe how many people want to see this video
@Anapriev
@Anapriev Жыл бұрын
Hello my friend! I live in the south of Russia. We have high humidity most of the year. Open Filament storage systems are not suitable for us 😞. I think I'm not alone in this matter. Can you review something closed and functional for filament storage? Thank you! 👋 Peace ✌️
@WilhelmBJ94
@WilhelmBJ94 Жыл бұрын
Do a video about ERCF! Please!
@servant74
@servant74 Жыл бұрын
Please do the opensource MMU
@Panda_5020
@Panda_5020 Жыл бұрын
Instead of making a video of ERCF you should wait and make a video on the Tradrack from Annex Engineering
@skaltura
@skaltura Жыл бұрын
Hmm, that sound deadening ... I got 10 tons (!!) of technical floor tiles (60x60cm like 15cm thick, each weights 12.5kg) about to go to landfill. Print these surfaces, glue them on, then mount the tiles on the wall ... Get both absorption and diffusion then. Now i got about 20m2 to do ... not strictly necessary, but would be nice for acoustics. If each tile takes 10hrs to print, it's 9 prints per flooring tile, that's 90hrs per. 48 floor tiles, so only 864hrs of printing ... not too bad. Just need to do automatic printing gcode 1kg of time I need to either find use for the tiles within 1½hrs, or pay to landfill them
@Chilternflyer
@Chilternflyer Жыл бұрын
ERCF video please!
@stevencoetzee1597
@stevencoetzee1597 Жыл бұрын
Hexagons are the bestagons... Is this not a recent Veritasium line?
@thenextlayer
@thenextlayer Жыл бұрын
kzbin.info/www/bejne/qpmympmrfdhpm7s Enjoy :)
@rahsaankcole
@rahsaankcole Жыл бұрын
Yes. ERCF video.
@thenextlayer
@thenextlayer Жыл бұрын
You got it!
@eyal_the_goat
@eyal_the_goat Жыл бұрын
סרטון טוב כמו תמיד, btw איפה אתה קונה ברינג? באיזור ת"א
@thenextlayer
@thenextlayer Жыл бұрын
תודה, אמי מזמין הכל בדוד אלי
@eyal_the_goat
@eyal_the_goat Жыл бұрын
תודה רבה!!!@@thenextlayer
@eyal_the_goat
@eyal_the_goat Жыл бұрын
יכול לשלוח קישור? לא מוצא בגוגל מפס 😫😫@@thenextlayer
@richardravich8337
@richardravich8337 Жыл бұрын
Jonathan -- loved this video! Thanks for the storage ideas that I will start printing. Also, loved the Israeli flag in the background. I have been watching what is going on in Israel and can't believe what I see. I've lived there temporarily and miss going back which I won't do until the fighting is over. L'hitraot
@thenextlayer
@thenextlayer Жыл бұрын
Thank you for the kind words and support!
@FeStratagem
@FeStratagem Жыл бұрын
Damn, straight out calling another creator like that, the salvagery
@thenextlayer
@thenextlayer Жыл бұрын
I left a very polite suggestion on her channel! Not "calling out" anyone, just suggesting that you might prefer to save floor space!
@שלומיוינר
@שלומיוינר 7 ай бұрын
אחי מעניין אותי איפה אתה קונה פילמנט
@thenextlayer
@thenextlayer 7 ай бұрын
לרוב אני לא קונה אבל ממליץ על פילמנטק
@GarrettBShaw
@GarrettBShaw Ай бұрын
Um, white doesn't absorb colors. It reflects it... 😂
@1234fishnet
@1234fishnet Жыл бұрын
Why did nobody design an eccentric wall mount for the honeycomb wall yet? Drill holes out of center is a solved mechanical problem in every (better designed) electrical lamp or Ikea furniture.
@thenextlayer
@thenextlayer Жыл бұрын
Oh snap, good idea.
@Enjoymentboy
@Enjoymentboy Жыл бұрын
No...i don't have 120+ rolls of filament and 20+ printers but i do have 80+ rolls (unopened still) and 3 printers. 😊
@thenextlayer
@thenextlayer Жыл бұрын
wowww, nice bag! :)
@Enjoymentboy
@Enjoymentboy Жыл бұрын
@@thenextlayer I have a bit of a problem. lol Whenever I i get a good deal I'll grab 5 or 6 spools "just in case". Before you know it I'm shopping for a new shelf.
@TechieNI
@TechieNI Жыл бұрын
ERCF Yes yes yes please.
@thenextlayer
@thenextlayer Жыл бұрын
Wow I'm shocked how interested people are in it
@TechieNI
@TechieNI Жыл бұрын
@@thenextlayer There is very few proper videos about them online. Your method in which you do your videos are easy to follow and your way of explaining things makes even dummy's like me understand lol
@ameliabuns4058
@ameliabuns4058 Жыл бұрын
damn tho, 3 kg is 90CAD. why not just buy the panels at that point?
@hec13gr77
@hec13gr77 Жыл бұрын
Nice AI video cover, which AI have you used
@thenextlayer
@thenextlayer Жыл бұрын
DALL-E, latest version :)
@marsrocket
@marsrocket Жыл бұрын
Why use a brim when printing something like the reprack piece? It’s unnecessary and a waste of filament.
@thenextlayer
@thenextlayer Жыл бұрын
It's even more waste of filament if a corner peels up and I have to reprint ;)
@tonybarnabe1130
@tonybarnabe1130 Жыл бұрын
100% do a video on ERCF.
@carelhaasbroek1575
@carelhaasbroek1575 2 ай бұрын
Is that an Israel flag? Why do i now want a wall with a bunch of flags and 3d printed clocks....... Where did you get that tho. Might want a south african one.
@SomeoneAbstruse
@SomeoneAbstruse Жыл бұрын
Love the addition of your flag on the back wall. Details make it 1000% better
@lam_xyz
@lam_xyz Жыл бұрын
Hey what’s this layer shift at around 3:45? On a bambu? Shame on them… ;)
@thenextlayer
@thenextlayer Жыл бұрын
Yeah not sure what happened but it was only one panel, of course, it was the one that I was doing a timelapse (murphy's law)
@yoelai
@yoelai Жыл бұрын
איש יקר, לא רואים בסרטון בדיוק את כל מה שעשית על המסור שולחן, אבל שים לב לכמה דברים: 1. חיתוך חופשי על מסור שולחן זה דבר מסוכן באופן כללי. חיתוך כמו שאתה עשית הייתי עושה עם ג'יג כמו cross cut sled או עם miter gauge. יש אינסוף מדריכים, וזה דברים שיהיו לך הרבה יותר שימושיים מחיתוך אחד פשוט. 2. אסור בשום פנים ואופן לבצע חיתוך cross cut כשהעץ נוגע בגדר. זה מתכון ל-kickback, וזה אם יש לך מזל והיד שלך לא מועפת לתוך הלהב, סיכון כשאתה מחזיק את הפיסה שנוגעת בגדר ביד. זה סופר מסוכן, אני לא סתם אומר. במקרה שלך, הייתי בונה cross cut sled פשוט ביותר, ואפילו תוכל להשתמש במדפסות שלך כדי להדפיס guide bar שיתאים למסור שלך. נכנסתי חזק לאחרונה להדפסות תלת מימד, ואני כבר שנים עמוק מאוד בנגרות :-)
@thenextlayer
@thenextlayer Жыл бұрын
Thanks - can you link me to what I need?
@Xials
@Xials Жыл бұрын
Kudos for being brave enough to display the Israeli flag with so many anti-Israel folks around. ❤
@thenextlayer
@thenextlayer Жыл бұрын
Thank you. I want to show support for the men and women protecting my family and I.
@Xials
@Xials Жыл бұрын
@@thenextlayer I almost got to go there on a birthright scholarship! But I could tell they weren’t thrilled about me being technically qualified so I didn’t push it. :D Love your channel!
7 Functional 3D Prints That Solved REAL Problems
22:31
The Next Layer
Рет қаралды 55 М.
I Hand-Picked the BEST 3D Prints
21:26
The Next Layer
Рет қаралды 501 М.
Jaidarman TOP / Жоғары лига-2023 / Жекпе-жек 1-ТУР / 1-топ
1:30:54
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
«Жат бауыр» телехикаясы І 30 - бөлім | Соңғы бөлім
52:59
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 340 М.
I 3D-Printed a Glock to See How Far Homemade Guns Have Come
29:15
VICE News
Рет қаралды 15 МЛН
It's MULTIBOARD! A Better Honeycomb Storage Wall?
12:05
CyberBob City
Рет қаралды 97 М.
I had ASA Poisoning! 25 IMPORTANT Filament Answers!
27:26
Loyal Moses
Рет қаралды 326 М.
Always Perfect 3D Printing Support Structures: The Ultimate Guide
14:49
JanTec Engineering
Рет қаралды 134 М.
Turning 3D Print Waste into New Filament!
12:48
CNC Kitchen
Рет қаралды 2 МЛН
Make USEFUL 3D Prints with THIS List of Hardware
24:54
The Next Layer
Рет қаралды 319 М.
What happens when you run Bambulab 3D Printers for 100,000 hours?
18:29
Now You Can Recycle Your 3D Prints Affordably*
29:10
The Next Layer
Рет қаралды 121 М.
Maximizing Workshop Efficiency with 3D Printed Upgrades
24:35
The Next Layer
Рет қаралды 143 М.
I 3D Printed "Viral" Tools So You Don't Have To...
24:42
The Next Layer
Рет қаралды 359 М.