Nux Mg 300 Expression Pedal Demo | Secret Tones Here!

[@MusiciansReflib]

Such a helpful video. I really like that you go into extreme detail, talk slow and clear about everything you are doing, and not assuming I already know a bunch of things. Thanks!!

[@ThePedalGuy]

Glad it was helpful!

[@howgreatisourgodgreatminds3032]

I just received my NUX MG300 today. Thanks for the update and all your tutorials

[@ThePedalGuy]

Glad you like them!

[@kyleblaneplays]

Literally waiting on my MG-300 to arrive today and I see this pop up in my feed. I got it based on yours and other videos, everyone just seems to really enjoy playing around with it.

[@ThePedalGuy]

Glad to hear. Enjoy the mg300

[@hanovergreen4091]

Backordered MG-30 ship date pushing out again, I should have purchased one of these. How did it work out for you and Best Regards

[@ЕжиКкоторыйлюбитбенды]

@@ThePedalGuy Hello! Is it have auto-wah? Can I use it in pedal-board without simulations of amp and cabsim?

[@ThePedalGuy]

@@ЕжиКкоторыйлюбитбенды I don't recall an auto wah. Yes you can turn off the amp and cab sim if you want to use it on a pedalboard.

[@ЕжиКкоторыйлюбитбенды]

@@ThePedalGuy Okay, thank you very much!

[@rangdog01]

Very helpful thank you. I had no idea how to work the pedal effects and this was the only thing I could find that actually helped. Legend.

[@pierrevivies3158]

Thank you ! Whitout your explainations it was impossible for me to activate le pedal as wah! Thanks a lot

[@ThePedalGuy]

Happy to help

[@TezTezTezTezTez]

Pitch bender with the pedal sounded fun 😃

[@nadhilafiq]

tq . finally i find solution to active the pedal..

[@ThePedalGuy]

Cool

[@radias2922]

ohhhh man, this is awesome. thanks!!!!

[@ThePedalGuy]

Sure thing!

[@ThunderFalcon333]

I got this Saturday for the hell of it.i gotta say I like it and it's a fun pedal for $149.

[@ThePedalGuy]

You bet it is. Watch all of my vids and you’ll find a whole bunch of things to do

[@ThunderFalcon333]

@@ThePedalGuy I'll check out ur videos 👍

[@OD138]

Can you set the pitch bender to just tune down a half step or full step? When I'm learning songs that are tuned down I want something quick so I don't have to tune my guitar.

[@RockatHome]

Please make a pitch shifter preset like tom Morello with this nux mg 300🙏

[@ThePedalGuy]

It does have a whammy already but not with enough range a la Morello. I’m sure they have this on their list to improve.

[@RockatHome]

@@ThePedalGuy I bet you can make an almost certain Tom morelo sound with this effect.👍

[@Abenjohar22]

Excellent demo keep it up

[@ThePedalGuy]

Thanks

[@farleytrading]

thank you,very helpful video!

[@ThePedalGuy]

You’re welcome

[@mr.dizzzm7385]

very helpful, thank you 🙏🙂

[@ThePedalGuy]

Thanks

[@oldmanandguitar]

I am interested in this pedal, maybe add to effects lopp of my origin 20? I currently love the sound i have with a ds1, metal zone and ns2. Does the nux have its own noise reduction? Many thanks for the video.

[@martinchocoo]

hii, great video, tho I cant seem to turn on the wah on no matter how hard i push down, i´ve previously updated its firmware if that helps.

[@dr.hesoyam48]

u r the best, thanks for good instruction

[@ThePedalGuy]

Thanks.

[@d3strac00l]

Terimakasih pak saya berhasil

[@ThePedalGuy]

Glad to hear it

[@kholileo821]

I bought mg300 today . And I'm trying to activate the wah pedal, but I'm not done yet. I pushed it slightly hard, but nothings happen. How hard should I push it? I'm just afraid it will broke the pedal..

[@Thejas9369]

Ya the same prob for me

[@jatashyarjoshi889]

Just push it.... dont be afraid i dont think it will break or smt... worked for me

[@brownadebola5244]

Well explanatory🎉🎉❤

[@ThePedalGuy]

Thanks

[@RobinhoGuitarCovers]

How many octaves does the pitch bender have? Looking for 2 octaves up for the Tom Morello whammy

[@KevinTPLim]

If you figure this out *please* share!

[@RobinhoGuitarCovers]

@@KevinTPLim i think at this moment it's just 1 octave up

[@shoter9696]

Hi! pedal guy, love your videos. I got a question. My volume/wah pedal is not working correctly, when I change presets it suddenly volume goes down a lot or activates the wah from nowhere. I hope you can help me with that. Any way, thank you for your videos! Saludos from México.

[@ThePedalGuy]

Sorry for my late reply. Have you calibrated the exp pedal?

[@gunslingersymphony5015]

I only recently got my MG-300, and on mine, after holding edit/exit and save, then using the group module buttons to navigate to the pedal option, I have to press save to get to the calibration, and edit/exit just exits them menu. I don't know yet if this is the same for other menu options.

[@irenabosworth9707]

Can I set the Min to half volume and the Max to full volume? I want to boost the volume on guitar solos without using gain

[@Fernando.Canal2]

This is awesome

[@ThePedalGuy]

Thanks 🙏

[@jesusamayaguitarra77]

funciona el pedal de expresión en el parámetro de modulación también ???? muy interesante tu vídeo !!!

[@ANONYMOUS-sg6qh]

si entiendes ingles mínimo preguntale en ingles 🙄

[@joedesouza6686]

Very useful info. Thanks! Most Multi effects units plugged into the front of an Amp don't sound good. But they sound great if you use an FRFR Amp/powered speaker. Where does the MG 300 stand?

[@ThePedalGuy]

Thanks. The MG-300 sounds good either way. Here’s a vid that demos this kzbin.info/www/bejne/mJLIammtfZt-j9U

[@joedesouza6686]

@@ThePedalGuy Thanks Scott. I just watched the link. Very useful and amazing feature.

[@stanissuban]

thnk you om

[@ThePedalGuy]

You’re welcome

[@hargisP2]

Thanks

[@ThePedalGuy]

No problem

[@Searchingforsilver777]

I was happy with the MG 300 before but seeing this video makes me want to experiment more and more. I also have a BOSS ME-80 which is real fun to play with. The only problem is I also have the Katana MK II 100w head w/ 5 " speaker and home made cabinet with two 12' jbls =, two 4.5" All arounds. And two 4 " piezo tweeters. SO my amp pretty much does many of the things the effects pedals can do, however they will both work compatible with the amp at two different levels in the effects chain. Got a lot to play with.

[@ThePedalGuy]

Looks like you’re heading in the right direction

[@paulhansen8566]

Great video! I just got mine today and I calibrated the expression pedal, but I'm having a problem. I pick the string or play a chord their's a half second delay with the sound coming out. I don't have the delay on at all and it sounds that way on every preset I try. Is their a way I can fix that or is the unit bad?

[@ThePedalGuy]

That’s odd. If you would post a video demonstrating the issue on our MG300 FB group we can help

[@musik4life24]

Hello nice Videos i subd;). Torn between 2 multieffect units One Question: What about nux mg300 compare to the boss gt1??? Tone wise and quality of the effects? A good Rectifier would be nice!

[@ThePedalGuy]

Thanks for the sub! Haven't used the GT1 so I couldn't tell you. The MG-300 has a Dual Rec included already, but I found that I liked the Diezel emulation even better

[@muan_tea]

Can this be directly connected to a phone as an audio interface, im currently using the mg 30 and i can directly connect to my phone and use it as in interface using a cable adapter. I wonder if that can be done with this? Please help🙏

[@estebandavilanaveda7114]

Does the Whammy included in Mg-300 has a 2 octaves mode?

[@ThePedalGuy]

I believe it's only one octave at the moment.

[@estebandavilanaveda7114]

@@ThePedalGuy oh ok :(, thank you

[@Funkfreed]

Would you rather have the TSAC tone & menu simplicity of NUX MG300 or the stomp mode of Valeton GP 100?

[@ThePedalGuy]

Haven’t used the valeton so I couldn’t give you an objective opinion.

[@alexandre8014]

Ola to tendo problema com minha mg300 nao reconhece o dispositivo no update o que posso fazer estou usando o windows 10

[@ThePedalGuy]

If you would please ask your question in English I'll try to help.😀

[@tamila_keek7628]

Dovnload cyi ton

[@ridzuanmohamad4491]

Hi .. I cannot into calibrate screen. Do we need to upgrade the firmware? I just received mg300 today. Tq

[@ThePedalGuy]

You don't need to upgrade the firmware to get into the calibrate screen. I did a video on this very subject. Check my MG300 playlist.

[@By-Guitars-Fun]

Could you do a tone of zz top please 🙏 on the mg 300 nux. 🙏

[@ThePedalGuy]

Thanks for the suggestion. I'll consider it.

[@tiago5a]

Is it possible to create a freezer effect with a reverb and the expression pedal? Thanks

[@ThePedalGuy]

Not that I’m aware of

[@sinistrality7883]

Can you use the expression pedal to do ambient volume swells?

[@ThePedalGuy]

Sure. You should be able to do that just fine.

[@sinistrality7883]

@@ThePedalGuy nah im sorry, I'm mainly asking this since most expression pedals that controls volume, only control the volume of the amp and not the guitar, so when you put heavy reverb and delay on it, and try to do volume swells the trails of the reverb and delay aren't left off.

[@berryoaks3061]

Hi, can you also make a demo of how to calibrate the expression pedal of the MG-30. you can't find anything about this in the manual. You can't actually call it a manual, it contains almost nothing Thank you in advance.

[@imthebatking]

On the Nux website there's a manual with expression pedal instructions and also a firmware update to fix some issues people were having.

[@berryoaks3061]

@@imthebatking Thanks!

[@ThePedalGuy]

I've shown how to do this on a few of the MG-300 vids.

[@maumontag]

How is the wah wah kept active? because when I press the BYPASS to change the Presets the WHA WHA turns off

[@accentontheoff]

So the parameter to which I can assign the pedal within each effect is predetermined? Or can I configure that. Thanks.

[@stormdami]

ok what if I am not going to record anything at the moment. Considering I have no DAW. Can I simply plug nux somehow to my PC and hear the sound of what I play? Looking for some trick that allows me to enjoy full nux simulations (amps,cabs,,efxs etc) but bypassing my combo and not buying frfr..

[@ThePedalGuy]

I don't understand the question. You don't need to use a computer at all to enjoy the sounds of the MG-300. Just connect your guitar and use a pair of headphone.

[@stormdami]

@@ThePedalGuy Neither I want to use my combo nor headphones. I want to enjoy amp,efx and cabs from Nux. So I wonder if I can plug Nux to my pc somehow to pc sound card so I could hear what I play through pc active speakers.

[@stormdami]

I am afraid that connecting Nux into combo front I would be missing either Nux amps or Nux cabs simulation functionality..

[@ThePedalGuy]

@@stormdami OK, I think I understand. Well, the MG-300 is an audio IO so you can plug it in via USB and use it with your PC

[@stormdami]

@@ThePedalGuy thx!

[@candyman5429]

I wish there is a sustainiac pedal on mg300🙏🙏🙏 it must be fun...

[@ThePedalGuy]

Maybe one day

[@gitarhane]

I am pressing pretty hard to activate the pedal but it doesnt work here. Should i press harder or something?

[@ThePedalGuy]

The on/off on the expression pedal is pressure sensitive so you do need to press down with your foot and it should feel fine. Takes a bit more work with your hands but if you are still having issues try calibrating it

[@gitarhane]

@@ThePedalGuy i handled it thx for answer

[@elemkay5104]

Hey cool vid. I noticed that when you used the whammy, pushing the expression pedal all the way down didn't result in a whole octave drop - it was slightly off. Is that something that is consistent whenever you use it? I've seen a few people talk about issues with the pedal working 100% correctly, so just doing some research before I take the plunge and get one.

[@ThePedalGuy]

Thanks. That probably had more to do with not calibrating the pedal properly to my hand strength.

[@eloy4672]

is the exp pedal dual function? If you turn it off it function as a volume pedal?

[@asirex]

Can the pitch shifter be used as a different tuning (I mean without tuning the guitar to that tuning)

[@ubw8754]

I have a question. Is it possible to assign exp pedal to more detailed parameters? I mean, Can I assign exp pedal to a [gain control] knob of AMP section? or Can I assign exp pedal to some specific parameters in EQ? And is it possible to assign exp pedal to several parameters at once in one preset?

[@sinistrality7883]

I have this pedal, and the answer is no, the exp pedal can only be mapped on the volume of said parameters, basically "how loud do you want Modulation to be" etc, it's not that detailed tbh and no, there's no parameter for the EQ, and no you can only map one parameter in a preset.

[@sinistrality7883]

How far is the reach of the pitch bender? a full octave? double octaves?

[@prince_peter_immanuel]

Zoom G1 four X or nux MG 300? Which one is best in worship patch and more cooler tone Thank you

[@mimicr3y39]

Hey there! is anyone else here experiencing some sort of warble or glitch sound with their pitch shifter? thanks

[@ThePedalGuy]

Well, it's a whammy and they are known for that type of digital artifact.

[@mimicr3y39]

@@ThePedalGuy oh so like when i try to play like a triad it just doesnt work with this pitch shifter? I can only play one note without i being a warbly mess that turns into a diff pitch

[@ThePedalGuy]

@@mimicr3y39 yep. Single notes are going to sound better

[@jhonelguerrero7218]

Can do pre select? While switch on other patches?

[@ThePedalGuy]

Not sure I understand.

[@muhammadrakanyusra1430]

can you use it like a stomp? instantly turn off/on the distortion or any other fx?

[@ThePedalGuy]

Hi. Unfortunately, no not at this point. It might be addressed in a future firmware update, but I would bet that it will be found on the upcoming MG-30 when that arrives.

[@abrod6098]

0.46 I can’t do that it I’ve pressed it but it just show the pedals that come from the presets please I need to know what I have to do.

[@abrod6098]

0:46

[@ThePedalGuy]

Really not sure what you're asking here. You can't calibrate it?

[@spartanunyil6772]

updet for new software nux MG 300 2021 🙏🏻

[@ThePedalGuy]

There was a new firmware released recently. Did you grab it?

[@howechern]

Hi, very useful video but I'm semi-regretting purchasing this because I read that the 2 on-board foot switches can't be use to store preset effects? So it can't really be used in a jam session where I might want to have distortion on one foot switch and chorus on another? Is that correct?

[@ThePedalGuy]

That’s correct. If that’s what you’re after you might give the mg400 or mg30 a look

[@pauloing1pauloing167]

00:32 click here to start the video.

[@steelydan1242]

Can you do this for MG100?

[@ThePedalGuy]

Eventually I might be able to do something for the MG100

[@martindamasin8669]

Would the exp pedal set to the od sound good for a solo boost?

[@ThePedalGuy]

When it comes to the EFX block, the Exp pedal Controls GAIN (DRIVE) parameter of OD/DIST. Or controls PITCH parameter of PITCH BENDER.

[@JamesSmith-v9h]

Once I press the edit button it takes me back to the home page instead of the calibration menu😢

[@hifijohn]

You have to press the save not the edit/exit button.

[@JamesSmith-v9h]

@@hifijohn thanks

[@markblack5015]

For me, this Pedal button does not work, I press it strongly and it does not illuminate after calibration

[@ThePedalGuy]

I would contact NuX to see if they can help.

[@markblack5015]

@@ThePedalGuy I have already dealt with this problem. the cable that connects to the PC was to blame. I connected the cable to charging the phone instead of connecting and transferring files and data. Everything works as it should.

[@elordemedina9474]

🥰🥰🥰

[@ThePedalGuy]

Thanks

[@Godspeed961]

i push the pedal button but doesnt become red.

[@Godspeed961]

ok i doesnt put enought the expression pedal to turned on. i think i will broke it on my table lol.

[@ThePedalGuy]

Ok

[@hitmakerstudio6405]

my pedal button wont get red

[@ThePedalGuy]

Have you calibrated the pedal?

[@hitmakerstudio6405]

@@ThePedalGuy yes it works now thanks! The problem was The pressure function to activate the pedal was not clear! Now I love this little Box...

[@ThePedalGuy]

@@hitmakerstudio6405 great!

[@Vince1974]

Hi, My expression pedal only works with the wha or as a volume. When set on delay or mod... still a volume controller. Any idea ? Best regards

[@ThePedalGuy]

Hi. Couple of questions. 1. Did you calibrate the pedal. 2. Are you using the latest firmware? 3. When you have the pedal assigned to anything other than Wah is the "Pedal" light on?

[@Vince1974]

In case it helps I found out : You need to activate the expression on/off the pedal by pressing it on toe area :)

[@Vince1974]

@@ThePedalGuy the pedal was not lit on ;) Thanks !

[@ThePedalGuy]

@@Vince1974 Figured that's what it was.

[@Vince1974]

@@ThePedalGuy by the way, the 4 first presets 1A-D don’t have a mic in front of the cab, do you know why ?

[@Antonio-xk6yk]

Without upgrade this multieffect are very sucks

[@ThePedalGuy]

There have been upgrades. Maybe give that a try instead of negative comments that mislead

[@asirex]

Can you set the pitch bender to just tune down a half step or full step? When I'm learning songs that are tuned down I want something quick so I don't have to tune my guitar.

[@KevinTPLim]

Great idea! Did you find a way to make this work?

[@asirex]

@@KevinTPLim kind of, I just gradually pitched it down until it was a half step, but there's no option to do it faster. I would recommend to save the preset so that you don't have to do it everytime