Corsair iCue H150i Elite Capellix AIO Unboxing and installation guide

[@TheProvokedPrawn]

Related videos How to wire and connect Corsair RGB fans kzbin.info/www/bejne/oKe7dJWkrpKGq9k Can I use different fans with my all in one cooler? kzbin.info/www/bejne/g56bZqSDer6feqs See the Corsair iCue H150i Elite Capellix deals (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available):: Corsair - go.corsair.com/QyN2dM Best Buy - bestbuy.7tiv.net/5Onb1 NewEgg - newegg.io/nc4e55fc1e Amazon US - amzn.to/32vASIO Amazon UK - amzn.to/3c6O7TB Amazon CA - amzn.to/2ZEdp6J Amazon DE - amzn.to/32xx7CO Amazon FR - amzn.to/2FIkNGI Amazon IT - amzn.to/32xxc9A

[@sebastianedwards6731]

Hey just letting u know this pump should work with am5 u should do a video on it would be nice for ppl to know

[@oshotz]

For those wondering, I just installed this AIO and all the problems he brought up seem to have been just an issue with his model :) My screws went in cleanly (no need to bend any fins) and there were no dents in my AIO. Got lucky I guess :D Thanks for the video btw!

[@TheProvokedPrawn]

Super

[@MrModius]

Same here! went in expecting to lose my wrists but it was a breeze haha, corsair must've rectified it, screws go through the fans in the front with no trouble whatsoever!

[@pokey8854]

Yo, do you need a “Fan_Opt” on your mobo

[@oshotz]

@@pokey8854 The AIO Pump plugs into the “CPU_FAN” header on your MB, so no, I don’t think you need that. You will need a USB header and a SATA connection point for the Commander Core that’s included with the AIO.

[@pokey8854]

@@oshotz Gigabyte Z490 UD ATX LGA1200 Motherboard so it should work for this it has the cpu fan header

[@Unsub424]

Man, I gotta say, your voice has an extremely calming effect. You really should do like, late nite radio. Love the video, laid out very nicely, Thank you!

[@TheProvokedPrawn]

Thanks Myc. Hope you enjoyed enough to subscribe 🦐🍤

[@Unsub424]

@@TheProvokedPrawn Didn't realize I wasn't. You got a sub from me 👍

[@TheProvokedPrawn]

@@Unsub424 thanks

[@TheProvokedPrawn]

Have some therapy kzbin.info/www/bejne/ome7i2eOndx7ZpI

[@joeneighbor]

And old trick passed on through generations, when screwing in metal screws (any really, including wood), do an occasional reverse turn or two (counter clockwise instead of clockwise). Especially if you feel the screw binding. This helps the screw stay within the threads of the softer metal of female side (in this case radiator body). Because of this technique, I never have the thread problem that you describe. I rarely ever get stripped threads unless there is something majorly defective (like when a bolt as bad threads).

[@clemp3010]

I just installed this AIO tonight and had zero issues. Everything went perfect. I am running a 3900x. With the stock cooler my idle temp was 45c. It dropped to 24c. Temp in timespy with stock cooler was 79c. It was 50c with this. The fans never ever ramped. I also boosted from 4.3ghz top with stock cooler. It's now boosting to 4.5ghz.

[@TheProvokedPrawn]

Nice

[@ys6343]

@@TheProvokedPrawn hi can you help me is this cooler good for a i7-10700kf and is the fans are loud ?

[@gruffalocrumble494]

I'm sure I've watched this in the past, but kind of committed to buying one of these now and found the video again. Loved it the first time, loved it this time. Thank you for the thorough review and tutorial.

[@-BUGZ-]

I had the 240mm forever and i just started to get a decent sized air pocket in it and the pump is in a squealing cycle no matter what i do. So i just ordered this one because i wanted to try 360mm anyway even though it’s older it’s still the best deal 360mm non LCD pump screen AIO for the money. I will literally have 3 commander cores now lol but i only use one.

[@gizmo928]

this video was so relaxing and helpful, thank you

[@TheProvokedPrawn]

You're welcome. Hope you enjoyed enough to subscribe 😁

[@gizmo928]

The Provoked Prawn I did 😄

[@TheProvokedPrawn]

Hero.

[@kingsol5292]

Why does this video have such a calming vibe to it

[@TheProvokedPrawn]

That's how I roll.

[@catonthephone]

Watching this at 1 a.m. and it feels as if I am asking about this product to a butler in a bar. uwu great video, made me sleepy

[@TheProvokedPrawn]

Glad you liked it. Hopefully you enjoyed enough to subscribe 😁

[@sammmm87]

@Emory Sacane weird

[@c7t378]

Bruh I’m about to do the same when I get back from work lmao 🤣🤣

[@kvdzee1gamer426]

I am reading this at exactly 1 am

[@GamerGeekNerd86]

@@TheProvokedPrawn what if I don't have a USB 2.0 header on my motherboard what can I do?

[@KingProdigy]

Used this video to install mine! Thank you greatly for being very clear & thorough in your installation! :)

[@TheProvokedPrawn]

Thanks for taking the time to comment. Glad you found it useful!

[@greenleafsss9935]

@@TheProvokedPrawn hey i Was wondering Is the fan loud?

[@Mustang1984]

@@greenleafsss9935 If anything I've read that the pump itself can be loud, the silent mode only goes down to 2200rpm whereas the 150i pro version can go down to 1100rpm.

[@DocHudson420]

@@greenleafsss9935 he installed it upside down do not do this

[@timxgames]

Holly shit, was looking for a good review got what I came for, but this man's voice. Dam

[@TheProvokedPrawn]

Hope that means you liked and subscribed. xD

[@timxgames]

@@TheProvokedPrawn sure did

[@TheProvokedPrawn]

Have some therapy kzbin.info/www/bejne/ome7i2eOndx7ZpI

[@stahmedpendragonguinevere2711]

You've got the voice for the gab, gained a new sub!

[@TheProvokedPrawn]

Thank you.

[@TheProvokedPrawn]

Have some therapy kzbin.info/www/bejne/ome7i2eOndx7ZpI

[@stahmedpendragonguinevere2711]

@@TheProvokedPrawn Noice!

[@pranto2233]

one thing about this AIO is that if its front mounted its coolant temp is higher almost 5-6* in terms of idle and load temp. As you can see that idle temp is 40 in front mounting as intake, if its setup to be top mounted as intake then it is atmost 33-34 and at load never goes beyond 38 at load. i think the pump has a gravity issues when mounted as front as it has to pull almost 360mm of water against gravity im using a 5900x

[@d-hayve1453]

Oh ok

[@DarkestAngel2ndCh]

This video was fucking amazing, you actually SHOWED people how to plug the pump into the controller unlike legit 99% of the videos on KZbin, thank you

[@TheProvokedPrawn]

I aim to please. Sub to say thanks and see more. 🦐

[@tringobass3329]

love the music along with your voice

[@TheProvokedPrawn]

Hope you enjoyed enough to subscribe for more 😃

[@TheProvokedPrawn]

Have some therapy kzbin.info/www/bejne/ome7i2eOndx7ZpI

[@kopilkaiser8991]

You are absolutely brilliant in teaching us how to work out all the steps mentioned in the video 😊

[@TheProvokedPrawn]

Glad it was helpful!

[@macgranholm6739]

I’m drunk and I went to install this into my 4000D and i it wasn’t going in at the top so I was like fuck it, KZbin time, and the first video I watch has a 4000D and I’ve never been so satisfied with a KZbin video in my life thank you brother I love you

[@TheProvokedPrawn]

Glad to be of assistance! 👍😎

[@hackabusi]

Came here as recently purchased the AIO AND case. Thought it was a case of using the long screws through the fan > metal bracket > radiator! Great vid. Thank you!

[@pissedputin7738]

You can't be more laid back than this dude.

[@flynephool3643]

The most soothing voice in the tech space...love it! ;D

[@TheProvokedPrawn]

Thanks. Enough to subscribe I hope. 🤣🦐

[@flynephool3643]

But of course...done! ;D

[@viperdemonz-jenkins]

have this AIO for eight months and love it.

[@DeeTofa]

Wow, great video! I'm making a build using this case and AIO. Wasn't sure where to start, but this video definitely will help me.

[@TheProvokedPrawn]

Glad it helped! Hope you enjoyed enough to sub (and have seen the case video)

[@happynewuser6565]

And how is the cpu cooler?

[@DeeTofa]

@@happynewuser6565 It has done its job perfectly. Have had no issues with it.

[@Road2Rally]

Not sure if this was addressed but the idea of the water pipes is that you want the pipes above or as in line with the pump as possible so that air doesnt get trapped in the pump. really hard to have happen but it is possible

[@LUKAS-bb4jc]

According to u/shocksim who is Cooling Product Mgr. at Corsair : "We're planning a January FW update to enable per port LED control and mixing/matching fans on Commander CORE. Unfortunate that we couldn't have that ready for release..."

[@darthkittycat7086]

you are the second youtuber I have seen use this music other than dankpods.

[@allanx7182]

Watching this today so I can buy it tomorrow! Looks awesome!

[@hunterbuns]

Thank you for being the only person on the internet who shows where to put the Commander Core module. I've been searching for ages now. But I still have no idea how you made it stay in place, since there aren't any mount points on this thing that I can see. I guess I'll just superglue it or something idfk

[@TheProvokedPrawn]

There are double sided stickers included in the box. Use those.

[@Mr_Wilson_1967]

I bought the H100i for my Legion Lenovo i5 11500 gen 11. I can't get the backplate off. So I put the PC back together and now having a think before I screw up my motherboard.

[@Seldaphar]

It's pretty funny you chose the Corsair 4000d airflow, It's the case I was planning on using this in anyway!

[@TheProvokedPrawn]

That is funny!

[@indydominator1180]

Both came out in the last week so he wanted to showcase both together

[@HSelod]

How did you position the pump?

[@chrisharris5497]

Trying to slowly fit my new system together and it seems that the long screws aren’t thick enough to tighten into the fans, atm it’s pushing me to putting the rad above the fans but I want to achieve what you have. I can’t fix the rad to the fans, how on earth have you achieved this prawny mate?

[@rxckyiskuul6829]

the fans are called the SP120 no vibration pads with 8 led lights

[@TheProvokedPrawn]

No they're new fans specifically made for this cooler that you can't buy separately currently.

[@sausyhd3006]

great video, just a heads up your aio is upside down. this can cause more noise, faster wear, and not great cooling

[@TheProvokedPrawn]

Oh hello fellow Gamers Nexus viewer. I showed in the video that's impossible in this case. But thanks....

[@Jason-ut3ou]

@@TheProvokedPrawn will this really affect the coolers i see this alot and as far as I know some coolers can't be flipped

[@danp4725]

@@Jason-ut3ou Sausy is correct, the pump needs to come down from the bottom up to avoid bubbles and some other internals wear. But unfortunately this case wont allow it.

[@AJerseyJohnnyEntertainment]

I know this is a year old, but your the channel I enjoy watching, so I’m hoping you see this message , anyway I’m building a build as we speak, it’s half built on my kitchen table, slowly irritating my girlfriend to the point I think I have 2 more days before she decided to “clean the table “ for me lol Anyway I have the exact same cooler. I’ve used it in the past, (believe it or not , I’ve used the single fan radiator and the triple fan radiator and I swear to you the performance difference was barely noticeable on a ryzen 7 4700g. However this build I’m using a ryzen 9 5900x, rtx3090c and the Corsair 5000airflow case. It comes with 3 front fans already installed, the option to install 3 side faced fans, and what I chose to do a push pull option mounting the radiator to the top of the case as the case allows you to mount the top fans outside of the case leaving you tons of room and it’s pretty amazing . My question is I’ve gotten several different answers on which way my fans should be facing. I have the two hoses heading to the pump at the back of the case , so you can get a idea of how the radiator is mounted, the 3 fans mounted to it are mounted where they are pulling air out of the case , blowing through the radiator and then I have another 3 connected to the other side of the radiator (outside the case , on top, a new benefit of the Corsair 5000) the outside fans I have blowing air outward so basically fans blowing into the radiator using the air from inside the case and the top outter fans pulling the air and exhausting it out the top. Is that the correct way to do it? It seems to make sense to me but people have put doubts in my mind. I have 3 front fans blowing nice fresh air into my case that air being pulled up by 3 fans mounted to the radiator on the top, and through my radiator and 3more fans pulling the hot air out of that same radiator. I then have 1 single rear exhaust fan blowing air out the back of the case, and I have two fans on the bottom of the case that blow cool air up through my rtx 3090 and then hopefully exhausted out of the back it up out the top. Any hope would be appreciated

[@TheProvokedPrawn]

Yes that's correct

[@rq4793]

I just got this today and I did not even know they had this. So i grabbed it right away and it’s it’s the white one too lol

[@TheProvokedPrawn]

The white one is best

[@christiannarstein-frde7771]

Very helpful👍 Thank you so much! These types of videos are the only helpful ones❤️

[@TheProvokedPrawn]

Glad it was helpful!

[@robertwelch2843]

I really hope that commander core is sold separately because I'd LOVE to use it in my new build so I don't have to jump through hoops with the current Corsair setup. That or just start putting it in the previous AIO boxes.

[@meljor90]

It is sold separately

[@peggles__]

Thank you, you’ve just saved my ass. Something you covered wasn’t clear on the instructions for some reason.

[@MrDarthTobi]

2011/2066 bag of standoff screws for my kit were uneven on each side. I used the bag labeled 115x/1200 because those were even on both sides like you said to use for a 1200 socket. Maybe they labeled the bags differently now that 11th gen intel is out. Hope this helps others.

[@patrickinottawa27]

Page 4 and 5 in the install guide give the instructions "clearly" in words and a diagram showing the stand off screws as 1200/115X bag. Maybe The Provoked Prawn mis-spoke. Not hard to do when your trying to do a video and thinking of a dozen different things.

[@Woodman3352]

I’m probably getting a pc for my birthday in august going mainly Corsair I’m definitely using this as the installation guide Thx

[@TheProvokedPrawn]

Happy birthday for August

[@madmilldro2657]

my problem with front mounting this, the tubes are within millimeters of the top fans. also the pump side tubes are wedged down.

[@papasmurf5598]

Try doing a build in a view 51 Snow case. Mega room for 360mm or larger Radiator in the top//bottom or side position. ATX case only with that extra 3 inch back area behind the whole case to work with cable situation. Power supply goes in the back also which leaves all that room at the bottom of the case to put in 3 fans. Actually has room for two exhaust fans at the rear also that looks cool. I built in this case and installed 15 fans. I used the Corsair QL 120mm. 140mm. And 4each 200 mm fans. The 200mm fans were Thermaltake Riing 20s. I put 2 in the front and 2 up top. It looks like a RGB Beast.

[@arbiter8246]

17:04 So you don't need to plug in the small usb connection since it's been replaced?

[@julianot.6271]

How quiet is it while gaming?

[@emin33mify]

Noob Question. How does the Commander Core stay in its position 17:12 Is it screwed into place or has he used an adhesive? I'm building my first gaming pc and plan to use this AIO. Thanks

[@TheProvokedPrawn]

It comes with sticky backing

[@emin33mify]

@@TheProvokedPrawn thank you for the help. Love your content!

[@emin33mify]

@@TheProvokedPrawn Would i be able to use a fan splitter for the commander core to power and control the RGB of 9 fans?

[@TheProvokedPrawn]

@@emin33mify others have said so. But I've not tried so can't be sure.

[@spike378]

For asus mobo, set to ignore cpu fan speed in bios to bypass cpu fan error.

[@mpresto15]

Can you flip the pump with the tubes coming out the bottom over the cpu?

[@dudepants3]

Yes but the Corsair logo on your pump will need to be flipped which is easy to do as well, I would be worried about the length of the tubes but that also depends on the size of your case I suppose

[@Countery]

How can u use 9 fans with rgb with commander core

[@aryansaple7865]

Thank god you made this video cause the instructions do not help LGA1200 at all. I'm glad you said you have to bend the fins and all-cause I was straight going to return it. Ludicrous honestly that they don't have instructions for this very popular chipset.

[@TheProvokedPrawn]

I aim to please. Return the joy by subscribing? 🦐🦐😃

[@mathiastorfs6407]

Great video! keep up the good work! I only want to mention 1 thing... There are a lot of ppl doing it wrong like you do, even manufacturers do it wrong.. DON'T EVER MOUNT YOUR RADIATOR WITH THE TUBES ON TOP WHEN YOU INSTALL IT VERTICAL!!! Your pump will draw air from your radiator and it's lifetime will drop drastically and it won't have it's full cooling capacity. I know it looks better this way but it's not an ideal way. A better solution would be to mount the radiator horizontal at the top of the case.

[@TheProvokedPrawn]

Sigh. I covered this in the video. It's not possible in the case. Glad you watch Gamers Nexus. Well done you.

[@bobbellairs6035]

I just set up my Corsair iCue100 Capellex last month (July 2023). Everything went together okay, but the commander software that you showed is not anything like what I have. Mine is very confusing, with no manual to consult. Also trying to understand why I would not connect the pump to the pump fan pins, instead of the cpu pins.

[@SwiftyIfty]

How did you make the lighting effect at 22:32? I've looked through iCUE lighting settings and cannot figure it out.

[@tavciq]

Hi, I installed the pump but I didn't removed that foil at 18:36. Should I take it all apart and remove foil or it has no effect on performance?

[@TheProvokedPrawn]

It's just to hold the backplate in place

[@s2jzx]

You are the next guy who must be hit 1mil. Subs ❤️

[@TheProvokedPrawn]

It's gonna be a while!

[@D_BUS]

I have the three fans like you have but mine are on top of the case. Do you think this would fit fine in my case?

[@notfinishedhere0]

Thanks dude! This plus small bits and pieces in instruction manual as well as looking for what somethings were on the motherboard (first time not doing something aside from plug and play in PCI Express slots) and I could do it. So must mean it’s a great video!!

[@TheProvokedPrawn]

Glad to help. Hope you enjoyed enough to sub

[@trout3685]

At 20:55 are those thumb 'screws' more like nuts? I'm wondering because they didn't give me my hardware so I just put some spare nuts there but I'm not sure if that's okay.

[@TheProvokedPrawn]

Yes

[@nobody-rw1fr]

They should have been in the bag full of screws and thumb screws. It’s in a bag named Miscellaneous H/W

[@ThisOrThat13]

I can confirm. A power drill was the only way I was able to secure the fans to the rad.

[@sohan8327]

Is this cooler compatible with an intel lga 1700 socket, or do I need to get a special adapter?

[@tehf00n]

It is compatible. It comes with the all the correct screws and everything. Some places will warn you it needs a seperate set of screws to mount but that is old information and it now comes with everything you need.

[@kingneptuneplays]

I legit just ordered this case and aio but nervous to put it together 😳

[@The01NoOb]

This AIO goes better with the 5000D, the 4000 is a little tight imo

[@kingneptuneplays]

@@The01NoOb most definitely I’m mad I bought the 4000 then the 5000 came out...

[@Mixnar98]

i installed it but the pump rgb never went on pump did work but could not find it in icue. Now pump doesnt even start upaynmore and cant start the pc because overheats and shutsdown,.... bad wire i think that goes into commande pro....

[@mrdrifta8755]

little tip is to screw 2 screws into each one of ya fans to hold then in place then put ya rad up put the long screw into it then swap the small screws out for the longer ones once its in place if ya know what i mean its how i do it but good video man

[@spajvc]

I have the same aio but I can’t manage the lights from the icue program . I can’t even install profiles cause all lights on the vent work but not the ones on the aio 😢

[@philipp2076]

Hello there, i have not understood why it isnt possible to install the 2 non rgb fans to do a push pull configuration, can anyone explain to me?

[@TheProvokedPrawn]

You mean just have two not three in this setup? Three RGB on one side, two non RGB on the other? You can do that if you want. I did actually end up doing it after the video.

[@Gottatelemhowto]

Watching this putting it together, he sounds like the fist fight game leader from fable 1! Great video tho mad props and super nostalgic. Feel like he’s walking me through it 😂😂

[@TheProvokedPrawn]

Appreciate it!

[@NDSiXL]

Hey man, thanks for the video. I got the 4000x and the h150i elite and I set it up exactly like how you did it. Front mount of the radiator, except my hoes is coming from the left side of the pump. Glad to see someone else with the samiliar configuration. The case just doesn't have the space to mount a 340mm radiator on the top. I assembled it without any tutorial and just based on previous experiences with building PCs. Though this was the first time I use a AIO water cooler.

[@Jay-jp7pj]

Thank you very much for providing an insightful and thorough review on this product! Sold it for me totally.

[@TheProvokedPrawn]

No worries. Hope you enjoyed enough to sub

[@Jay-jp7pj]

@@TheProvokedPrawn of course! You are now my go to for installation guides for my new build, Thank you once more!

[@madmilldro2657]

also my tubes are very stiff. I cannot bend mine like yours. I got the white version.

[@justntime100]

Thank you I was installing my radiator and my cooler fins got bent a little bit and I started to freak out I came to the conclusion that I couldn't use it that I had to buy another one but ur poking holes in it way worse than I did

[@sandercohen9058]

I have 4000X. And i bought 360mm H150i Capellix. I am thinking of mounitng 360mm on front. But you said we can't mount it tubes down. What do you recommend? H150I Elite Capellix on front or H100I Elite Capellix on top for my 4000X?

[@TheProvokedPrawn]

It's not essential to mount tubes down btw, kzbin.info/www/bejne/enzacmqvnLl9pJI But you'd probably get better cooling on top as exhaust.

[@novaeclipse9536]

Can this cooler cool a ryzen 9 5900x well?

[@crumssxplyd5951]

I need to know this too but i think it does

[@Miguel-th3wx]

The Pump Whine I had it on my H150i and even on the H115i Platinum when the Pump is set to low. But in terms of Thermal performance is there actually a noticeable difference? Compared to my old temps in the normal h150 and the H115i Platinum that I'm currently running, I dont't see quite a difference.

[@jektv_123]

How did you get your hoses oriented like that mine won't bend that way I bread them but I don't like the way it looks and it scares me that something can go wrong

[@taylortyler999]

I'm a noob with PCs. I bought this AIO to replace the dual fan AIO that ibuypower sent with my PC. Should the power source that runs my dual fan be enough to run this with no issues?

[@imoutodesho]

I can't find the am4 standoff, AM4 bag only comes with AM4 bracket, Intel bag has bracket and 3 types intel stand off, TR4 bag got bracket and its stand off too.

[@nobody-rw1fr]

There is a backplate that goes into the 4 holes from back to front of the motherboard, unscrew the 4 screws that came on the motherboard and remove the 2 bridges. Then put in the 4 standoff screws that go in the 4 holes and take off the Intel bracket and switch it for the AM4 bracket that goes on the cooler head. After that it should fit but make sure not to put 1 of the 4 thumb screws too tightly because then it makes it unbalanced. Make sure to put them in little by little as this is the most sneaky step because then it makes you think you did it wrong when that’s not the case.

[@Annodite]

Magnificent!!!!!!! Thank you for the upload

[@TheProvokedPrawn]

Glad you enjoyed it!

[@LUKAS-bb4jc]

Is it possible to tell iCue that ML120 PRO RGB only have 4 RGB since from what I can see in your video, the effect is buggy 22:32

[@TheProvokedPrawn]

They were set to auto detect. I hadn't set them manually at that time.

[@LUKAS-bb4jc]

The Provoked Prawn ok thanks so you can tell iCue that some have 4 or 8 LEDs to get the effect correct ? If yes then my problem would be sold !

[@LUKAS-bb4jc]

@@TheProvokedPrawn Oh just one last thing if you don't mind could you please share a screenshot of your lighting setup with ML120 PRO RGB and ML120 RGB.

[@htm6519]

Yeah this would help, also want to use 4 case ml pro's and a capellix h100i with the ml 8leds on it

[@tehf00n]

Its actually better to have the pumps at the top so they flow down as it uses a gravity system to assist the liquid flow.

[@lazriosjenkins1436]

i dont understand how he can bring up gamers nexus vid when the whole vid is basically saying not to the tubes on the bottom lol like he never watched the vid

[@slepzi3131]

How do I control 9 fans in total 3 for rad and 6 for airflow. *all RGB*

[@edsoncampos8947]

Thank you so much for the review

[@itsmezed]

But where does that single wire coming out of the pump plug in? The manual doesn't say.

[@TheProvokedPrawn]

The smallest one? CPU fan header or pump header

[@nickcornelius9076]

When installing the command core, you go from holding it in place and didn't say how you actually mounted it to the case. I don't see any way to attach it 🙁

[@TheProvokedPrawn]

It comes with double sided sticky tape in the box. Attach that to box sides and stick it in

[@pauls.5815]

You sir have a career in books on tape.

[@TheProvokedPrawn]

Nah. I can't do different voices or accents . 🤷‍♂️🤣

[@fissilepear7805]

I really wish Corsair sold the commander core separately. What the commander core is was what I thought the commander pro was originally. I was an idiot and plugged in 6 ml pro fans into the pwm ports on my commander pro which shorted out my commander pro and my 6 ml series fans. Biggest mistake I’ve ever made with computer parts

[@TheProvokedPrawn]

Ooof. Sorry to hear that!

[@TotalWarriorLegends]

Where did you put the rgb of the pump in to? It's a 3 hole female cable...

[@DarrellRinier]

Icue isn't picking up the AIO, in devices and printers it says "unknown USB Device (Device Descriptor request failed) I've tried everything twice

[@TheProvokedPrawn]

uninstalled and reinstalled iCue? Updated controller firmware?

[@DarrellRinier]

@@TheProvokedPrawn I've reinstalled/uninstalled. I've literally just updated it as I'm typing this. I've "repaired" icue multiple times. This thing is the fans are spinning, which I assume the pump is working too

[@kev_sk8475]

Excellent video, good quality!

[@TheProvokedPrawn]

Thank you sir. Hope you enjoyed enough to subscribe 😁😃🦐🍤

[@Dennild]

im looking to do this build but with a RTX3080 STRIX. which is 318mm long. do you think there is room for the rad infront and then the long 3080 card? also can you use the RBG splitters in the commander? i have been searching for this information everywhere but cannot find it anywhere

[@باطل-د5ت]

lol ik it’s a month late and you probably already figured it out but the others who are looking in this reply thread for the answer, it’s yes, it worked in My NZXT H710i with my 3080 Strix

[@okkeboonstra4587]

Its everywhere out of stock in my country just picked up the h150I pro XT with some good sale

[@Carrm3ist3r]

Thanks for the video!! I am setting mine up right now lol

[@TheProvokedPrawn]

Hope it helps

[@rcorrea26]

Just picked this aio yesterday. So the pump connects to the controller and not the motherboard ?

[@CobraTate_TheTopG]

Is the h100i one good

[@ItsMarkohh]

Is there anyway to power the pump by not connecting it to the commander core?

[@NML1288-z9y]

does it matter which way the pump is facing on the cpu? for example, the corsair logo is on the side instead of upright??

[@SimplyGallup]

Can someone tell me why the block is not lighting up but the fans are?

[@eisblauuu]

If I put in 6 Corsair LL120 Cooler, did I must use a 4 pin on the Mainboard?

[@kasukahei]

I went for the ML360R and it's honestly so much better.

[@charlesgauvreau40]

The ml or the corsair xd

[@Po7ent]

So how’s its been running..love the white setup

[@TheProvokedPrawn]

Yeah, good!

[@Po7ent]

@@TheProvokedPrawn nice I just installed this aio exchanged the 240, also got 2 Corsair fans 1 LL and 1 QL... I also put a fan on the inside of the radiator. 👍

[@moustacheboy2350]

If I where to install this AIO in a corsair 500d rgb se. Will that work properly? Because that case comes with LL fans. This has ML fans. Would that even work properly? They say not to mix fans. Can I also swap them out and use QL fans?

[@TheProvokedPrawn]

Yes, yes, yes. No issues. You can set what fans are what in iCue.

[@LFiers]

Hey how did you go? Did you swap the fans our for QL's?

[@MRD_III]

So if my motherboard doesn’t compute with RGB will I need a RGB converter to use these fans or no?

[@Iconic11111]

Theres new XT version of this AIO now so which one you recommend for i5 14600k ..this non XT or XT ?