Insane Chainless Bicycle Prototype

Go to bit.ly/TheQCleanMyMac to get CleanMyMac X
Imagine bicycle without chain. Can it work as well as regular one? Well.. let's watch this cool experiment and find out.
Yes, this prototype works but definitely needs some modifications.
If you like this video - don't forget to subscribe :)
Production Music courtesy of Epidemic Sound www.epidemicsound.com
Hackbeat by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@TheQ_original]

Go to bit.ly/TheQCleanMyMac to get CleanMyMac X

[@Sakthivel2542]

Hacksmith industries want to know your location

[@Kamal_AL-Hinai]

I wish you'd put your final thoughts since you tried it. Better or worse then a chain etc.

[@arigatoulim]

👍👍👍👍👍👍👍

[@szreg6425]

What spray paint company do you use?

[@insubordinate_i]

заебешься крутить педали 🥱😂

[@uthermaceanruig5098]

Congratulations on the rediscovery of ancient bicycle technology.

[@vickanid1862]

Exactly what I was thinking. Chains were popular since you can have multiple gears to handle a variety of road conditions.

[@williamoftexas1489]

Funny you consider 150 yrs ago as 'ancient'.

[@djt6fan]

@@williamoftexas1489 its a figure of speech

[@dmasrc18b]

@@williamoftexas1489 congratulations on discovering figure of speech 🤣

[@sterogerson4177]

@@dmasrc18b be kind he might be figuring out what that means 😂

[@pd4689]

I've seen this idea before. Problems are 1) gear ratio, you're confined to one, 2) the actual contact point and transmission of power is confined to a single tooth at a time thereby putting extreme force onto a small point, 3) the drive shaft roller bearings are pretty small and likely to fail quickly, 4) the drive shaft is thin and subject to distortion.

[@justtruth8281]

Ware are the breaks ?? Also

[@xXnicknameXx]

I completely agree , the idea is as old as the world and just as useless .

[@7days306]

5) - конструкции необходим кожух, иначе от грязи и пыли значительно уменьшится срок службы шестерней

[@Jeaum]

Its a prototype

[@brianbenson2446]

Finally! They've made a bike that you have to pedal twice as much to go half as far!

[@user-to9mm5cy6m]

The fitness clubs rent them out. Great workout and not to far from home.

[@thatraymond]

I think this is slick! Probably an issue if you get dirt/pebbles in the gears though.

[@anujkumarsahu5371]

This man took "We are evolving, just backwards" to next level

[@mareksykora779]

This man solved the problem of dirty chain very simple way.

[@unclsam6798]

@@mareksykora779 Shaft driven is old technology, chain came later. Shaft driven cycles were ruled out due to high loss of energy during transmission.

[@mareksykora779]

@@unclsam6798 Again for you: It solves the problem of always dirty, lubricated chain. Can you understand the sentence?

[@mareksykora779]

​@Sky NinjaHave you ever ridden a bike, dude? Your pants will get dirty from the lubricated chain in the middle of the chain. Here, the middle part of the shaft is hidden inside the frame.

[@mareksykora779]

@Sky Ninja Its about city bike, not mountain bike. Find yourself Brikbikes channel. They produce bikes with shaft instead of chain.

[@terrificfrogg8377]

Pretty cool but it actually shows how efficient the chain mechanism is

[@tom4208]

can easily be fixed with just different gear ratios... chains work the same way the sprocket is the gearing basically

[@terrificfrogg8377]

@@tom4208 but this looks like it will require a lot more maintenance due to its rigid nature. A chain is flexible, its able to take a lot more shock

[@Will80085]

​@@terrificfrogg8377Shaft driven motorcycles require much less maintenance than chain driven, that's one of their biggest advantages.

[@stepanpetrenko357]

​@@Will80085на цьому переваги закінчуються

[@Moneyybro]

​@@Will80085motorcycles riding on big speeds, not like average bike

[@merix2741]

This reminds me of those ideas I had when I was a kid and how genius it was. Only to discover someone already made it years ago. This gives me same vibe.

[@michaelcroos4713]

Awesome! And to make it even more useful, install a 3 or 5 speed internal rear hub, then you have gearing options without derailleur gears and chain to worry about.

[@Trutko.Dmitry]

Такие системы были опробованы ранее. Очень много недостатков. 1. Слишком большой вес. 2. Быстрый износ зубчатых колёс. 3. Необходимо дополнииельно создать систему свободного хода. 4. Ухудшение регулировки колёс. Плюс десяток других недостатков.

[@dzetta369]

Система свободного хода уже встроена.

[@KlimChugunkin888]

КПД не ахти ещё.Пункт 2. Можно подобрать материал и грамотно его обработать.но и цена этому есть(если это будет сделано специалистами)." Улучшенные зубчатые колеса изготовляют обычно из качественных углеродистых сталей 35, 40, 45, 50, 50Г и легированных сталей 35Х, 40Х, 40ХН и др. Нормализованные зубчатые колеса небольших размеров выполняют из углеродистой стали обыкновенного качества Ст5, Ст6 и качественных углеродистых сталей 35, 40, 45 и 50, а больших размеров - из углеродистого стального литья 35Л, 40Л, 45Л, 50Л, а также из марганцовистого н низколегированного стального литья различных марок. Для повышения контактной прочности зубьев и соответственно нагрузочной способности зубчатых передач применяют стальные зубчатые колеса твердостью НВ>350. С увеличением твердости рабочей поверхности зубьев возрастают также износостойкость и сопротивление заеданию зубьев. Однако зубья с большой твердостью рабочей поверхности плохо прирабатываются и нуждаются в высокой точности изготовления. Кроме того, их механическая обработка затруднена, для облегчения ее эти зубья нарезают до термической обработки. Так как некоторые виды термообработки вызывают коробление зубьев, то для исправления формы зубьев применяют отделочные операции: шлифовку, притирку, обкатку и т. п"(с)

[@Maksim19982]

Да и ремонтопригодность подобного добра такая себе.

[@user-vl3lm1xm3b]

Как по мне зае***ся педали крутить

[@DYECPRO]

Согласен. Но круто. Самый жирный минус это скорость. На нем по дороге и по горам не поездишь

[@pradeeppanchal4485]

You can't Stop paddle when it's move freely , I mean there a very important role of one way bearing which is missing in this case

[@gurjotsingh8185]

👍👍❤️

[@tejasshinde56]

We can have foot rest for this purpose

[@sage_of_the_six_paths]

Yea u are right man

[@demenphieuluuky5892]

But you can stop by paddle without brake like Fixed Gear Bike.

[@cyber-backpacker]

Rear axle has ratchet system...he can stop pedal even when it is moving...am I wrong...?

[@doronron7323]

Nothing like re-inventing the wheel. A pal of mine has an 1898 Belgian FN, which I've ridden. Nothing new here, but I admire your hack it and weld outlook.

[@PyniVadim]

Не ну это конечно вообще законно?! Как я раньше жил без этого?!!)))

[@owendamon734]

I love how this “prototype” has been around since the late 1800’s

[@Octopussyist]

And was soon abandoned.

[@Tokopilbiru]

Hahaha we going backwards!!

[@christophergilley3218]

Can't make up something new do a reboot. Lol

[@theh0r5e90]

if I recall it was also patented by Iver Johnson a typewriter machine company

[@roadtripper8493]

The great great grandma of the prototype 😁

[@AKSaleh.Official]

This's cool DIY video, but shaft-driven bicycles are already there for more than 100 years, since 1890. Actually, chain-driven are considered a vast improvement over shaft-driven bicycles with better performance, efficiency, and ease of maintenance.

[@SuperSohaizai]

I don't think it has better efficiency as chain has efficiency of up to 98% if I remember correctly. The other 2 I'm not so sure, can't remember the details. I believe what you are thinking of is belt driven bicycle, not shaft driven bicycle. Cool tech is still cool though, so I'm not gonna judge

[@workshopninjathe1st]

There are public bike rental schemes in Portland OR using shaft drive bikes using 3 speed shimano hubs

[@firesurfer]

@@SuperSohaizai That's the same as what he said. Reread his comment. The chain is more efficient.

[@SuperSohaizai]

@@firesurfer oh kay.... I actually misread it until you pointed it out... Thanks, and my bad!

[@firesurfer]

@@SuperSohaizai I figured that when he wrote: " shaft-driven bicycles with better performance, efficiency". Without the context of the entire sentence, it can easily be misread.

[@Johny40Se7en]

Lovely design, and it's quite therapeutic seeing the stages of the build. It's no doubt less efficient than a chain though. I think having a one drive set up like that would suit an E bike more connected to a tidy throttle.

[@jamesofallthings3684]

No it's a braindead design.

[@bellavia5]

This was invented 100 years ago. One was found in a barn on American Pickers.

[@motarted1735]

The sleek look is definitely top notch. The major disadvantage is friction loss which will be much higher than a conventional chain.

[@user-yc8bf2rm4w]

To do this, you need to lubricate the mechanism, I had an electric saw where the same mechanism was used, I forgot to lubricate it and as a result, after a week, the links were erased.

[@GregZentTrumpetMan]

Yeah, no bearings or grease in that tube, so good luck.

[@thomas316]

I cant speak for bicycles but in motorcycles a new chain is more efficient than bevel gears but actually research shows that chains lose efficiency rapidly as they wear. On a bicycle I guess that's less of a consideration. That's one reason you've seen more motorcycles move toward using belts and gears in recent years, along with lower maintenance. Obviously with a bicycle gearing is a substantial consideration that favours chains. 👍

[@isakramngaihzuala4894]

And another is that he can't rest his foot as the wheel rotates with the rotation of the pedal,unlike the chain system

[@timvandriel4568]

There are many more disadvantages to this. When you put a lot of force on the pedals, the smaller gear will be pushed out, away from the other gear with great force. In the way he currently welded the tube, the connecting plate will just bend open, losing any contact between the teeth. It's also much more difficult to do gear shifts, more likely to get something like a long dress or a coat being pulled into the gears, and probably a lot more.

[@ThomasMarxJeetKuneDoIFO]

You just need a higher gear.

[@danielf3623]

And some way to keep your shins when going downhill.

[@esh92]

or just use an internally geared hub...

[@freewaycola5415]

@@esh92 or just use a chain

[@jerzygadzinowski9138]

@@freewaycola5415 hahah +1 chain is much better

[@RonitSingh17]

Make my way to 1000 please 🙏🏻 🥺 It's a kind request Please 🥺.

[@ivanpaezcabo6300]

Well done but it needs a bigger crown gear.

[@tirebiter1680]

Back around 1899 to 1910 a luxurious expensive bicycle was made with a drive shaft that surrounded the right chain stay and had bevel gears on either end. This was an alternative to a chain.

[@king09426]

The Q: Rides a bicycle. The bicycle: My time has come.

[@Mister_A03]

did you just call him fat?

[@kanon0n]

@@Mister_A03 da.

[@RonitSingh17]

Make my way to 1000 please 🙏🏻 🥺 It's a kind request Please 🥺 😢

[@kanon0n]

@@RonitSingh17 nyet

[@janzenbrixp.crisostomo9874]

@@Mister_A03 no

[@darthvail]

The major issue with his sprocket build is that he was to pedal extremely fast for minimal energy transfer. In other words his system is far less effective than a traditional chain gear system

[@Calypso993]

There's plenty of room for improvement.

[@samuelmatheson9655]

@@Calypso993 need a phat gearbox or one made of exotic materials to get more efficient pedaling

[@carldoomsday3975]

Rohloff 14speed internal drive hub.

[@kc4415]

Also the fact you cannot stop pedaling without the bike stopping, or more likely destroying the sprockets

[@opinanlosjovenesrd3477]

@@Calypso993 Exactly what I was going to say. It can be improved.

[@trickydicky2908]

Too much criticism from people who couldn't pump up a tire without botching it. Great craftsmanship!

[@davemanone3661]

Just what I was thinking!

[@Baryogenese]

It is trash, he just made a good mechanism 1000 times worse and turned it completely useless.

[@lepyrolink182]

There's a reason bicycle evolved from using exactly that to using chains.

[@earlyxplorerstudios8592]

It is basically equal to the lowest pressure gear on any bicycle. You're gonna have to paddle a lot just to move a few feet. I'm not exactly sure if I'm gonna recommend it....

[@exobjm5890]

I know

[@jbduchene]

Just need to use a Nexus hub with integrated gears...

[@earlyxplorerstudios8592]

@@jbduchene *which he didn't, hence my point.

[@deepaksahu3685]

Correct

[@andrasolivier7185]

@@earlyxplorerstudios8592 Still doesnt help anything. The loss is sooooo high here. If he used faster gearing, he can hardly make it move...

[@jareddahlseid551]

Looks like perfect gearing for those who had to ride to school uphill both ways!

[@rsc68er]

Peddle 50 times, move 2 meters

[@imteraz]

Hahaha 😂

[@danii8168]

BMX for the win, that is if your chain isn’t holding onto dear life

[@alal2192]

Uphill is probably very bad loool

[@fredbowers2300]

You forgot in the snow too!

[@aserta]

One thing i would've added is a banding that went over the sprocket's retaining pin, with a single, light tack to keep it in place. I've used the 1800's variant of this bike and that's one of the biggest issues with this design, the pin coming out after a while. Could also be fixed with making a longer pin, that has a hole, for safety wire, which was the way they did it (on the restored bike i used) but the problem with that is, it can catch clothes, so a sleeve would be more "permanent" and clean.

[@LuizHenrique-tn5jp]

Esplêndido!! 👏🏻👏🏻 , poderia fazer com bicicleta de marchas também?, fiquei curioso agora pra isso!

[@retweaksatapathy106]

The gear ratio being the same for peddal and wheel would require lot more peddling to travel the same distance but this idea was awesome.

[@Nikhilsingh-bf2cr]

Yes if we increase the size of gear then it will be more awesome.

[@kashmir-se-kanyakumari3574]

@@Nikhilsingh-bf2cr worse is that you can't have any gear shift options

[@Nikhilsingh-bf2cr]

@@kashmir-se-kanyakumari3574 hmm you are right but in this type of cycle gear swift option is difficult.

[@matsv201]

@@kashmir-se-kanyakumari3574 you can if there is a central gear system. They are really mot that uncommon. Can probobally by them of ali for $10

[@fecalmatter4195]

@@kashmir-se-kanyakumari3574 you could change the ratios or even add a gear but you would increase weight.

[@eshvvn]

'The Q' in 2030 : "Tireless Bicycle prototype"

[@h05k43]

he already made tireless bikes...

[@syahidanhassan9238]

He already did it

[@gabrielharamustek1283]

U forgot the "insane!!".. and he already did it

[@abd-ur-rahmanhussain5877]

He might decide to make the entire bike invisible!

[@nikhileshk7047]

I think you mean "wheel-less"

[@jamesofallthings3684]

I was just thinking how I needed a bike that was harder to peddle and slower. KZbin saves the day again.

[@timothyfelixjr.4881]

I love it! The drivetrain for a front wheel drive!

[@srinivassiddarth]

I think you need to use larger diameter gear wheels, so you can spin your legs less number of times. Try it . Great concept. You created history there.🙏🙏🙏

[@erebus1964]

I would say ... he re-applied history there ... even though I admire his approach to do it DIY ... it's been nothing new.

[@darkzero4608]

Yes correct. He has to peddle fast to cover small distance.

[@ompatel5226]

I think this mechanism is more suitable for ev

[@srinivassiddarth]

@@ompatel5226 how?

[@ompatel5226]

@@srinivassiddarth he could use different transmission ratio and then use another gear at rear with motor

[@officialjohnrokz2]

The power loss from the pedals to the rear wheel is insane.

[@islamisthetruewaytogod6812]

Maybe he can improve it in the future

this is actually is like truck on 1st gear. So you need to pedal more for to go faster but now you have more torque. So if he can do a double or triple gear system that is changeable it will be better than chain system I believe :D

[@aserta]

That's why when they used to make bikes like these, back in the 1800's they quickly ditched them when derailleurs started appearing. Chain reigns supreme.

[@kevind3185]

Not a power loss.more like a efficiency loss due to way to low of a gear ratio. But he could climb any hill slow.

[@radiocontrolled9181]

@@kevind3185 Slow indeed, pushing the bike i.e. walking it.

[@bigmac3006]

I had no idea how simple the switch over was!

[@LinkFelton]

Awesome concept. Change up the gear ratio's so you don't have to pedal as much as well as maybe add some type of clutch on the front so you can stop pedaling without stopping the bike. I'd buy!

[@attananightshadow]

Shaft driven bicycles are over 150 years old. They were abandoned for the chain as the chain is vastly superior.

[@vikasshelke5544]

I never experience chain breaks . Chains are by far more efficient in power transfer than shafts

[@wicked9299]

No even in cars they use shaft to maximize the power in bike they use chain becoz bike is more efficient in fule economy to reduce the cost of shaft and it is also less maintenance I know your indian science student becoz iam also indian 🤣🤣 mai ne bahut Indians ko deka he har video ke niche uska science dalte baite he 🤣

[@ayman4540]

@@wicked9299 car mein shaft use hota hai because it needs more torque as it is carrying lot more weight compared to bikes. Also the inner and outer wheel needs to rotate at different speeds while turning this is difficult to achieve with chain drive.

[@wicked9299]

@@ayman4540 there is no need for different speed of rear tires while turning the front wheel needs to be at different angles and speed

[@ayman4540]

@@wicked9299 go read about car differential you will understand why rear wheels need to rotate at different speeds

[@keithbranch7718]

N no gears

[@joebaker2311]

People can say what they want about efficiency vs chain drive but you can't deny the craftsmanship. Great video

[@waynecampbell9714]

That's like saying I put lipstick on a pig and she's absolutely beautiful even though she's a pig she's still beautiful dude the fact of the matter is it's still a pig

[@jckdnls9292]

It's standard craftsmanship.. Nothing special about it

[@Djekill]

Мастерство на самом низком уровне

[@user-wu1jc7zr4y]

we can't deny how much he makes using this video, I guess at least $ 40000

[@psychlyeslg]

​@@jckdnls9292Crafted a video with 40 mil views and counting.

[@nordennature]

Для такой системы требуется сцепление, чтобы отключать подачу кручения от колеса к педалям во время наката иначе педали будут крутится пока крутится колесо. А это еще больше усложнит конструкцию, поэтому уже сотни лет как используется цепь

[@francomoreno1902]

Muy linda la bici como fue transformada Por los años 94 tuve una bicicleta cardánica y era confortable. Felicitaciones por tu excelente trabajo.

[@s_wozzzie]

Wow look now we’re pedaling twice as hard for what a chain can do in one pedal 😱 10/10

[@M.F.Hafizhan]

It's like mocking chains because you saw someone who's running a 22/52t spinning out once

[@joel7227]

You're assuming the chain is what creates the power ratio's, where it's actually the gears. You could have an equally powerful push with an appropriate sized gear. Hence why geared bikes have different sized cogs, not chains.

[@rcnelson]

Chains are messy, relatively short-lived, and wallow in road grunge. Driveshafts (as motorcyclists well know) are neater and require almost no maintenance. The drawbacks of shafts for both motorbike and bike are initial cost, more weight, and less efficiency than a chain. I think the trade-off is often worth it.

[@s_wozzzie]

@@rcnelson the friction loss must be crazy but true tbh, chain suck sometimes especially when they come off and you have to stop and put them back in, but ill keep my chains your opinion is valid though

[@s_wozzzie]

@@joel7227 that actually makes alot more sense ngl

[@LionHeart_.]

It seems like you have to pedal 10 times more than you would do with a chain, just to gain a mere fraction of the momentum

[@stavid7870]

Yeah you'd need alot more gears

[@Vajrapani108]

@@stavid7870 that's just a chain but worse and more delicate

[@suzysuzuki8865]

Different size gears would fix that, this was a first run so he had to have some baseline. Wouldn't be hard to correct.

[@suzysuzuki8865]

In the motorcycle world bigger sprocket= more torque smaller=more top end

[@yadavzoze4752]

Yes

[@hsv7676]

The axle mount is excessively loose and definitely needs strengthening. The gears need protection; a stone, a wire, a branch will ruin the entire structure. With such a gear, a planetary bushing suggests itself for the rear wheel. Although judging by the result and described above, the author does not intend to do this, this is only for content.

[@dude...are-you-sure]

That's pretty good craftsmanship. Now if you can somehow put more gearing to it that would be truly game changing IMO. Oh and freewheel~

[@isaiahwelch8066]

Actually, he has a coaster brake, so I'm presuming he put the drive gear for the rear hub attached to that, meaning if he stops pedaling, the wheel is able to stay turning.

[@enderlord5412]

Drive shaft bicycles aren't a new concept, their main drawback is that their fixed gear so you can't adjust power ratio and you can't back pedal. But props to you for building your own system 👍

[@Keterius]

I heard some company's trying to make an automatic transmission for it tho

[@bobmorane2082]

What’s the point of backpedaling tho I rather use it for a hard brake like in a 1 speed city bike

[@Keterius]

@@bobmorane2082 different speed acceleration and efficiency

[@enderlord5412]

@@bobmorane2082 for those who aren't used to it it can be a detriment, also breaking isn't very easy on fixed gear bikes, I'd say their for experienced riders only

[@manilanoakes3966]

I don't think it is mechanically efficient as a chain and sprocket.

[@robbymidgett3797]

Very cool. I like the thought. One difference I’d probably make is to find a larger diameter bevel gear for the pedal shaft. Seems like it requires a lot of pedal work for a little amount of output at the moment.

[@thatsclassified1]

That and maybe a housing for the gears so things can't get damaged and I don't know if you would have to lube it often

[@TarDaniel]

This was for demonstration purposes only. The rest is obvious 😎

[@fitwithsurya]

Same question but i think its for demo only

[@coolmendotdot2]

At least a lot of torque for uphill driving

[@andrecrosby466]

I wanna see it going uphill

[@oczhaal]

the chainless bike was used during WWI by the belgian army. The bicycle was made by FN Herstal and it had so many flaws and was so hard to pedal when the road wasn't flat, that it was quickly abandoned.

[@kraxen72]

no one is gonna mention that shaft driven bicycles are already a thing? the prevoius bikes with no inside of the weel were cool but this is just a lesser known bicycle type that is already quite easily available and used.

[@FaresDjebbar]

I had one, it also had 6 different gears! This is not an original idea as you said!

[@Narayan_Patki]

exactly

[@ParodieHecker-mobile]

Well, he still built it himself. There are also bikes with no inside. So what? Still pretty damn cool imho

[@sean2661]

Very cool recreation of the original shaft driven bicycles. It's crazy to think that about 120 years ago, bicycle manufacturers successfully produced and sold bikes with these features.

[@incautious1]

Okay, where's the one you built? THAT is the point of his videos. He built it himself - pretty cool

[@williamstidham9526]

I have a new bicycle from 1983 that has front wheel drive with this setup and also has a cost gear where it lets it go fast down hills and not eat the gears out while peddling with chain on back, 10 speed I think. Bought it from the man who put it together in 1983 and still has tips on the tires. Bought it because it was different, No one ever ask to ride it so it just hangs around

[@007nth]

Any video,we want to see.

[@dewmontain123]

Do a video on it. Even if its like 1 minute

[@williamstidham9526]

Yes, man had a bicycle shop and in 1982 they made these and the gear would eat out going down hills, 1983 they put a inline slip to fix that, Shop owner took this one out of box and hung it up in store till I bought it 10 years ago. Has the old new tires on it, looks like any bicycle 10 20 speeds, has a cable from center pedal up along the frame to curve down to front wheel and chain drive on back, I bought it because it was different, dark green paint with plastic gear where this one is steel

[@williamstidham9526]

BWA 2 wheel bicycle, on KZbin, not mine but would work the same way, made for ridding in sand

[@51-FS]

Can I ride it?

[@stormgamingtv6096]

My man went from making cardboard houses for mice to interesting contraptions

[@kiljirtmordorlj1112]

The part I like the most is going downhill free wheel with that bike. That pleasant vibration of 3000rpm spinning pedals feels like you're riding a thresher.

[@mssmmgnn]

Smart, as idea... but it has mainly two defects: - the hub of the pedals is blocked, it always turns. - only one transmission ratio is possible (and, in this case, too short). Anyway, again... nice idea, nicely performed; mostly for the cheap (using parts of old drills) and quick (entirely handmade) kind of solution.

[@rafflesiadeathcscent3507]

Not his idea, this is already an existing idea from 1900s

[@JohnNy-ni9np]

Yeh, it needs to have a clutch and a gearbox.

[@johnnyregs2378]

Those are the same two issues any fixed gear bike would have and they're still hugely popular. The biggest issue here is just ease of maintenance. Too easy to switch out a chain or cog or chainring compared to this. Shaft drives have been around longer than chain drives, bmw motorcycles and some others still use them. Shafts on a bicycle are only about 75% efficient where as chains are closer to 95% which is another issue.

[@sskamble6758]

Let's call a bug as a feature, you can reverse a bicycle now

[@andrasolivier7185]

@@JohnNy-ni9np Then add a motor too otherwise u die trying to make this shit move...

[@NJ-zz4gu]

It would be epic of he combined all of his insane bikes into one

[@MizanChen]

But if he combine both shaft driven and hubless bike together, the bike would be very2 slow

[@NJ-zz4gu]

True

[@BrigadeAntiCollabos]

Just one problem, not gear shift. Good job. 👍

[@Lappillainen]

Easiest fix, get a new chain. Lots of videos about that 😂

[@JMC-gy6ss]

Nice job! It is a work of art. The reason they don't make bikes like this is that steel is stronger in the pulling direction that the twisting direction. The shaft will always be at least as heavy as the chain. Also bevel gears are less efficient than roller chain, and tend to slip more.

[@bottomline99]

you just made that up, stop talking shit. try a more factual approach next time. for example, this can not change gears... the pedals can not freewheel... etc

[@WyreForestBiker]

@@bottomline99 you could easily add a freewheel to a shaft drive set up ..

[@patricialorentzen4874]

@@bottomline99 Actually, bevel gears (or any gears) are less efficient because there's a change of direction - twice in this case. Any force vector reqiures energy that ultimately is not delivered to the wheel. Where that's also true of a chain, the angular deviation is minimal by comparison, and is mediated by the difference in sprocket size (proportional to the gear ratio). So "made up" or not, the assertion is correct. Also, tensile strength may be greater than yield strength, it depends on the material. However, this is unlikely to matter as the forces required to either twist or pull a 5/8" steel shaft to the point of damage are unlikely to be achieved in this application. That said, I agree that the two major omissions are disengaging the pedal (freewheeling), and providing multiple gear ratios. All-in-all, a chain drive using a modern derailleur to achieve a nearly linear transfer of force while providing a wide range of input-to-output ratios is hard to beat.

[@bottomline99]

@ Patricia Lorentzen In my opinion the lower efficiency of bevel gears a simple matter of friction, which increases at 90 degrees with the inherent increased surface slipping that results (Agree with JMC on that). Respectfully disagree about the vector statement, eg a long belt drive that twists 90 degrees is virtually as efficient as if it didn’t. It was ‘The reason they don't make bikes like this is that steel is stronger in the pulling direction that the twisting direction’ that inspired my comment. That is not the reason, it urkes me when people just make shit up and preach it like fact! My thoughts and guess would be, for the same torque transmission, the chain style spreads load over a larger diameter cog and many teeth, the bevel gears are a smaller radius with only one or two teeth in contact, which undoubtedly results in much higher stresses, requiring higher quality materials, hardened surfaces, shimmed exactly to avoid wear, enclosed with oil (and seals) to achieve low friction, a variable gear ratio wheel hub drive. imagine its actually pretty good system performance wise however simply more heavier, complex, costly to make and maintain compared to the ole cheap and effective chain drive that won.

[@rxonmymind8362]

Nerd. 🤣👍

[@Hcheeza]

You'll need to put a kind of Free-to-lock reverse gear there, Imagine you'll injury your own leg because the pedals keeps cycling

[@butwhy9859]

Big brain

[@user-jc2mc3co5b]

На заднем колесе велосипеда стоит обгонная муфта

[@zandarion]

free lock gear already is inside the ball bearing. and reverse cycle works as stop pedal. 2 in 1. like every old school bicycles. invented millions years before Christ :)

[@amjan]

It's in the wheel hub.

[@ipengsmart]

Yes. This is what i am thnking.

[@retrobitadam]

This is how bikes should've been developed all along

[@tuskiomisham]

Who would win: - new chainless bicycle. - one sandy boi.

[@Swapnil638]

Ceramic Speed has been developing that tech for years (called “Driven”) to make it shiftable and race-capable

[@andrasolivier7185]

And unless they develop a heavily DNA modified racer with monster thighs they cant succeed...

[@Swapnil638]

@@andrasolivier7185 Looking forward to your research paper that rebuts the utility of that tech

[@andrasolivier7185]

@@Swapnil638 then u looking at a bad place ;)

[@nadavgolden]

I wish you had companion videos about the engineering advantages and disadvantages of your creations

[@alejandroponce182]

I think if change te gear ratio this will be great

[@rahulsharma3911]

Yeah.. things like fatigue, abrasion, gear ratio will be the enemy, eventually

[@mddanishkhan40]

I am thinking this is very simple idea why no one can do before 🤷

[@MrFliffi]

@@mddanishkhan40 because it has been done before and chaines just work better

[@brauliorubio2465]

@@rahulsharma3911 100% truth

[@anmoldalal16]

I applaud the effort. I also submi my observations: Inefficient, prone to failure and expensive due to replacement needed of worn machined parts. Result: Good practical experiments are not based on old failed engineering concepts. This design has applications elsewhere. Eg:Ships, boats, gliders,tents, gliders, big top tents and weapons. That said a 100 on the video. P.S, On second thought There is a way to increase power output ;) Clue - "Be like water".

[@pitt8274]

Nice job on making yourself work harder to get where your going😂

[@kanishk6103]

That's great but, 1) You'll have to pedal more, compared to chain cycles 2) You'll have to pedal continuously, you can't 'glide' like you do in chain cycles Apart from this, Great Idea!

[@Leshii_in_fact]

👍👍👍

[@Qwertyuiop-wg5xu]

i think it is possible to integrate the same mechanism present in the rear gear set into the current one if he did not do it yet, that way you can just let it glide, but true you have to pedal more than in a normal bicycle, and I would like to see if it is possible to add something transmission like to this mechanism, and I guess it is not impossible, but will definitely be time and money consuming, but I thing the end product will just be worth it

[@nigmatshabidiov9575]

Нужно постоянно смазывать шестерни, чтобы не износились. А педали нужно крутить в 5 раз больше чтобы скорость была как с цепью. Интересная концепция, но утопичная, на мой взгляд

[@flame5792]

Да я бы сказал вообще хрень полная

[@mikhailsabaleta7902]

А кто не даёт планетарную втулку поставить вот тебе и скоростя, также сделай кожух чтобы шестерни не торчали

[@mikhailsabaleta7902]

Но мне цепь больше нравится))

[@flame5792]

@@mikhailsabaleta7902 так этот хрен не поставил. Видать ему и так удобно

[@lamb_lion]

Ещё постоянно нужно педали крутить, особенно при спуске , а то ноги могут пострадать.

[@martin-iy1bs]

Creatieve 4 sure dude! Keep on freaking around!

[@usmedassistenciatecnica7247]

Chain: 5% Power loss Belt: 12% Power loss Shaft: 25% Power loss 🤷‍♂️

[@LeftOverMacNCheese]

Well there's a reason why shaft driven bike didn't took off

[@arthurryanorilla356]

But as same as belt drive you don't have to worry about grease or dirty oil on you're leg. Mamachari or japanese bikes has all three of them in the past don't if they still have em today

[@brijlal973]

So shaft driven is ideal for exercise?

[@usmedassistenciatecnica7247]

@@brijlal973 if you don't like wind in your face

[@peterduxbury927]

Gear box - could be 50% loss

[@TheRealGreg]

Now build a geared transmission into the crank hub and you'd really have something! Nicely done

[@tomkacandes8286]

There are geared transmissions for bikes but definitely not a build at home sort of thing and the ones sold are designed to work with chain or belt

[@Al-ng2wn]

At this point just install a motorcycle gear box and clutch. Although I'm not sure if the gears ratios is suitable for humans.

[@branni6538]

Look in the video list below this video. There is a disc gear ratio in full effect and it is genius.

[@macpaz]

@@branni6538 are you talking about the video titled "Erstaunlich leistungsfähige Maschinen und extreme Schwerlastanbaugeräte"?

[@qwertpoiuy430]

@@Al-ng2wn I mean just ride a motorcycle, far better transportation method of budget allows

[@zielony1212]

Yes!!!! Cycling without derailleurs! What a pleasure!

[@oldoldpilgrim7898]

My grandfather born in 1899 used to talk about a gear drive bicycle his friend had probably as young teen.

[@kaseratarun]

My professor made this years ago, and it still is in his lab.

[@mohammadwasilliterate8037]

This design is probably a hundred years old, it's single speed and heavy, useless, which is why it isn't used.

[@teemoleague907]

The chain is cheaper and lighter. Waste of time , energy and money.

[@kaseratarun]

@@teemoleague907 it's true, but as an Engineer's experiment perspective it is nice.

[@teemoleague907]

@@kaseratarun hopefully he is getting the money off youtube for this or he he should report this channel

[@kaseratarun]

@@teemoleague907 no need to do this, the idea is already useless anyway.

[@jerryespinoza2113]

Shaft driven bikes are immensely troublesome. Chain drives are far superior and vastly more rugged. The shaft drives are outdated and always tend to fail due to the prying nature of the gears. Even with shaft bearings they are no comparison to the chain drive

[@tjfSIM]

Yep. There’s a good reason for chain drive being the universal mechanism for pushbikes. This is a bit like making a piston engined airliner.

[@nedviga3794]

100%

[@Gin2341]

shaft are also not that efficient when deliverinv power to the wheels compared to chains

[@imafackinjunglist]

@@tjfSIM or eating instant coffee without a spoon.

[@williamh4172]

Not to mention that you are stuck with one gear.

[@KN-qb7wi]

I'm a Japanese mechanical engineer, and when I saw the video, I thought, what a stupid thing to do. When I looked at the comments section and saw that there were many people who thought the same way as me, I was convinced that my decision was correct.

[@TDJDC-uw1zt]

This is a shaft drive design, which is similar to the principle of a car. We have been specializing in this kind of bicycle drive shaft for almost 30 years. The above gear is exposed and cannot be protected by lubricating oil. The longer the riding time, the faster the gear wears. It is recommended to seal and protect the gear structure.

[@strictlyaudis7012]

It won’t be practical at all for these reasons : constant pedaling, and you have only one gear also uphill and down hill will face a lot of challenges . Thanks for bringing the 30’s back , I love it hhhh

[@callumgill7019]

You should see what New York bike delivery guys do on fixed gear bikes

[@strictlyaudis7012]

@@callumgill7019 this is not a bad thing to do at all , it’s thinking and planning and doing something, it’s just won’t be as good as the bikes nowadays

[@creteking23]

No gear like 100 years of bikes. Except no chian to break or noise......great idea

[@kennnn2011]

I feel the same

[@guscurci]

Just genious! Depends on the outcome is better than bikes of nowadays. For instance I have been using inner tubeless tires for over 7 years now and just had to change them now. They don’t get punctured and are just a bit less confortable in terms of absorving impact when wheels get out of the ground. Obviously competition cyclists will have a problem with it. Since my purpose is having a cheap and exercising transportation, my chinese brandless bike does the job perfectly! I get to work and return everyday about 14km daily, not much but the bike holds itself steady and robust with 1 maintenance yearly. Would also change the system for this one if it was readily available. But I wouldn’t be doing the handyman’s work because I have no talent so just pay a specialist and done!

[@naughtyfred1639]

The gear drive is pretty cool. Your fabricating skills are awesome. But I think changing a wore out chain would be easier than changing wore out gears.

[@rus8147]

Посность согдасен с тобой)

[@blazn0]

This gear system would break so fast going uphill. In 25 years of cycling I never had a broken chain. And I use my bike 7 days a week.

[@miguelnava8442]

@@blazn0 and the chain is actually more efficient and if you lubricate it (mostly like once in a month) it will last a lot of time

[@loxyrus]

make me wonder how car work without chain

[@blazn0]

@@loxyrus propeller shafts.

[@jeffmurdock8321]

Cat didn't lube anything for long term use cuz that bike was more an exercise of ""I can do it " rather than it being a practical idea.

[@Uriy-st1ke]

Следующий изобретатель должен вернуть цепь на место и поддержать круговорот изобретений в природе.

[@Sweetpotato450]

No freewheeling 🤣

[@whereandbackagain7059]

For real! Stop pedaling and you're gonna know real fast.

[@ryuj1n.sr208]

@@whereandbackagain7059 ride fixed gear and it's the same. Idk which drivetrain I'd trust tho, a regular chain and sprocket or this thing

[@Srowotv]

Good job brow,but Repot kalau di jalan menurun kaki harus lepas dari pedal😂😂 yah make freewheeling...

[@joserizal5027]

They just give an idea.. just put freewheel gear.. no such big deal tho..

[@MrRaceles]

better to weld ring type bevel gear to sproket wheel ,after grinding teeths of wheel.

[@EricFortuneJr.]

There’s no way to change gear ratios so hills might be a challenge. Another potential problem would be contamination and grit sticking to the exposed gears, grinding away and making it harder to operate over time. You would be oiling it down every day. These are some reasons motorcycles use sealed shafts.

[@scenicdepictionsofchicagolife]

Actually, Pinion, Rohloff, Shimano Alfine, and Effigear are all examples of multi-speed manual gearboxes for bicycles that could support multiple speed shaft drive bikes. Combine that with hydraulic disc brakes and you basically have automotive level technology and performance for a man powered bicycle.

[@ly5504]

@@blakejohnson3864 "One hundred million dollars". -Dr Evil

[@user-dg4me8ns4b]

Так на видео показали принцып работы.Шестеренки можно подобрать в нужном соотношении.Насчет загрязненности:можно корпуса сделать чтоб все в масле было и грязь не попадала

[@DokuFREENET]

Thats why bikes are made with chains , he did not discovered anything that wasnt discovered before, it is old building technique, not in use by any manufacturer cause of that

[@borgorajkeraban1403]

@@scenicdepictionsofchicagolife And you end up peddling 500 lbs a bike. Bright indeed.

[@bringtheseo]

You cant stop pedalling with this setup. Balls.

[@DaddyBrownbr]

대전시 타슈가 이 체인리스 구동계를 쓰다가 무겁고 후져서 폐기하고 지금은 안 씁니다. Tashoo, a public shared bicycle system in Daejeon, Korea, used a similar chainless drivetrain, but due to its heavy weight, poor efficiency, and frequent breakdowns, it has now discarded it and switched to a regular chain drivetrain.

[@shimul2007]

Congratulations! Now You can ride the cycle back and forth. 😍

[@space_tv2002]

If we could make a gearbox near the back wheel then the speed can be increased with good efficiency.

[@unkulwilly]

or just use a rohloff hub. internal gearbox inside the rear hub.

[@chrisdaigle5410]

Geared hubs are much less efficient than chain drives.

[@Zach-ju5vi]

@@chrisdaigle5410 True but it would probably last forever with little maintenance.

[@reefread1234]

It's been done

[@michaelschardan5312]

That'd be great if you could engage/disengage it. Then it could b used in case your chain breaks as a back up. It might be useful for motorized bicycles too.

[@kicheollee7857]

This system by combining two gears is less reliable because gear teeth can be loaded heavier than original system

[@timjohnson1199]

Ya know, there's a reason that bicycles evolved with a chain drive.

[@vincentwhite7693]

Anyone with any real engineering knowledge knows that this is a quickly thrown together project which may look good but could in no way be thought of as a reliable working machine.

[@stevespitler3070]

No way to lubricate things, must have. Lubrication.

[@ryanpersaud1267]

He's pedaling faster than he's actually going

[@jamesgizasson]

I'm not an engineer (flunked out), but I can see a few flaws. It needs a freewheel mechanism, the gears are unprotected from the elements, the driveshaft bearings are just tapped into the tube with nothing to keep them from getting pushed in too far, the crank gear is offset and unstable, and a kid on a Razor scooter could outrun that gear ratio. The sad thing is, this is a great concept! It just needs to be properly built. :3

[@intelligenceroboticworld2987]

No way can matter actually it's working thats will more efficient

[@jamesgizasson]

@@intelligenceroboticworld2987 Ummm... what?

[@ViktorDemin]

Есть только один неоспоримый плюс у подобной системы, это 40 миллионов просмотров...

[@ahmetizmir1081]

Good idea. But the use of iron pipe was bad. If the bike is accidentally tipped over, the iron pipe may be bent. Instead of a rigid pipe, a more flexible part can be mounted between the 2 gears.

[@Albaraa_Adam]

It will be a good idea if you make another one in the other side with a different gear ratio, so you can switch between them.

[@TamiyaPhilippW]

Improvements: Use ballbearings to reduce friction Make a more sturdy connection Make a gearbox Use screws with loctite to secure gears

[@isaiahwelch8066]

Actually, with this design, you shouldn't use ball bearings, but rather the same kind of bearings you find in automotive differentials, as they're cylindrical, rather than spherical. While they have a wider cross-section, they offer more stability to a linear rotating system.

[@TamiyaPhilippW]

@@isaiahwelch8066 true

[@louiewatson9389]

Loctite

[@krashpass]

Always fun to see someone playing around. LOL

[@jebidiahnewkedkracker1801]

I am not lying....I once saw a bicycle for sale at a Goodwill or Salvation Army store that had a driveshaft instead of a chain....I thought it may have actually been manufactured by some bicycle-making company, but maybe it was some custom job like this ^^^??? I don't know. I just wish I took the chance to actually ride it, but it had flat tires, and I don't think they would have let me take it out of the store without paying for it. Gotta give the maker of this bicycle driveshaft system credit though--as inefficient as a driveshaft might be, the handiwork is still to be admired. There are far worse and far more destructive and/or irrational things people can do to kill time and/or amuse themselves.😶

[@dastaniam]

This chainless bike looks great with the hubless tires ❤️

[@Po_gribi_s_Yurikom]

Ну да просто бомбезная идея. 👌Только педали замучаешся крутить. Ну а просмотры будут на ура крутится😂😂😂

[@Pan_Witold]

Надо проверить изделие в полуляхах.

[@user-hu6wl2ir6e]

@@Pan_Witold я думаю это полная хуйня, созданная, чтобы просмотров собрать.

[@vaqtinchaoshiq]

Фигня полная.

[@maxkot3659]

Не говоря о передаточном отношении, пыли и грязи между зубьями и о шумности данного вида зацепления.

[@albertrozenfild2963]

Не случайно даже снимать подробно в движении эту хрень не стали...

[@ma74ch]

You have a bad gear ratio and you have to pedaling constantly!? You cannot rest your feet on the pedals!? Bravo 👏

[@burger.bud1]

You know this would chew up that small gear without lubrication after awhile. Just like differentials need oil to keep heat and wear down.

[@callumh9450]

Grease

[@burger.bud1]

@@callumh9450 could work but it'll need to stay in the garage, what would make it better though is peddle assist.

[@user-vn5fb9nm1f]

Идея интересная, но на мой взгляд, надо на валу храповый механизм установить для свободного хода колеса.

[@rompure2795]

Не надо так сзади есть барабан который и так эту функцию выполняет

[@user-ok9mp5rs1g]

@@rompure2795 Зря Вы разрушаете этим людям иллюзии. Они достойны друг друга, один думает, что сделал прорыв в велостроении, другой даёт советы как говорили в фильме Собачье сердце "космического масштаба и космической же глупости".

[@antonbelochkin4861]

Так то не плохо, но потерь вагон, два редуктора ведь, придётся быстро педали крутить и тихо ехать

[@olliefoxx7165]

The gear nearest the pedal needs a guard over it to prevent things from getting between the mesh of the pedal gear and the drive gear. Dirt, debris, loose clothing and other things could get caught between the 2 damaging the gears.

[@dzetta369]

Во первых такой велосипед уже создавала какаято маститая фирма, во вторых было бы неплохо к этому делу притаранить гидромеханическое автоматическое сцепление рекуператор.