These Dudes Achieve Much With Little Rebuilding CAT 4Cylinder Engine No Repair Manual No Fancy Tools

[@СунгатКапанов-ы5х]

Собрались в комментариях одни умники, да по всей России так моторы собирают ещё и по пьяной голове)))

[@MrReinmetal]

Искал этот комментарий чтоб лайкнуть

[@mihail611]

Я из СССР. То, что я увидел - напомнило моё развитие. Я учился в ПТУ (Профессиональное Техническое Училище) на автослесаря . . . пришел на производство - мне сказали . . . забудь, чему учили. Мы тебя научим. Потом я попал на СТО (Станция Технического Обслуживания) . . . Здесь, все то, что делают у вас - делал я один. Времени занимало - много . . . но и деньги за работу - получал я один. У вас конвейер или колхоз где работают ВСЕ. Мне понравилось, что вы приобщаете детей и прививаете знания и умения. Самое важное - КОНТРОЛЬ и ГОРЯЧАЯ ОБКАТКА.

[@liomio4980]

I showed the video to my grandfather, a mechanic for more than 60 years. He loves these videos. The old man is 98 years old, and he spent the entire video crying.

[@hugolafhugolaf]

I cried too at the fact that given the conditions, that engine will need another rebuild at the end of the street.

[@squadric7722]

stop making shit up

[@nainitalism]

@@hugolafhugolaf You must think that all these people are completely stupid to do the same thing again and again and fail.

[@Cartelito3]

😂😂🥲

[@1crazypj]

Probably because of all the effort being wasted when it isn't done right? Dry fitting parts isn't smart move, even some grease would be better than nothing on the main bearings They fitted new Lanchester shafts and bearings, looks like they guessed at timing though?

[@jeffjohnson3912]

Amazing work by these gentlemen! I would love to see the longevity and performance specs of a motor like this compared to a motor rebuilt with proper tools and torque wrenches. Interesting comparison.

[@alscompleteoutdoor9091]

Bet they last longer the a rebuild done in a American shop....these guys know what they are doing...when your hand grinding the journals with paste you care about the tolerances.that showed me all I need to see to know these guys are legit

[@markthompson9914]

With the money they just earned they should by a torque wrench, then the next rebuild will last twice as long as this one ✌️🇬🇧

[@ทวีทรัพย์ศรีมาตร]

ช

[@markthompson9914]

@@gags730 H&S is a foreign concept t them. Their way is “if it’s my time it’s my time” end of, and “might is right” is another I believe ✌️

[@eagleeye566]

Bro the money they earned is just enough to provide food on the table for their families. Not like u and me living in the western country where we take things for granted and who cares about the fucken torque wrench,they got the job done without any fancy ass tools.

[@markthompson9914]

@@eagleeye566 yeah the money “they” earned only just gets them by, but the money the boss earns….🤦🏻‍♂️ I’m wasting my time aren’t I ? ✌️🇬🇧

[@ilyaskhan4082]

Please support

[@akiko009]

Nice job. Calibrated elbows doing the torquing.

[@mckeehan1943]

Nothing like Building an engine in a sandbox

[@ktmfour1007]

U laugh but thats how their made in sand casts

[@adinatasetiawan32]

Indeed it will never need another rebuild at least in 10 years

[@Природа-с4у]

​@@ktmfour1007😅😮😮😮😢😅 0:57 ҳазорз😅з😅😮😊 1:12 миллион😅😅😅

[@rylerortega8401]

Muy buen trabajo, gracias por enseñar. Saludos desde colombia 🇨🇴🇨🇴🇨🇴👏👏

[@timothyknotts4035]

Love the young man in there getting his hands dirty, learning something worth it’s wait in gold,nice

[@lyndonwilliams268]

That’s the only time i ever seen someone put a engine together without using any oil

[@johnmarlow2887]

Then look again with your glasses on. Oil was squirted on all moving surfaces before assembly.

[@mdftrasher]

@ 7:30 Not even a drop off oil?

[@victoragostinho2333]

I guess they do the best they can with what they have. Congratulations to them…

[@ilyaskhan4082]

youtube.com/@ilyaskhan6851

[@ilyaskhan4082]

Please support

[@johnrose7491]

Shame they didnt oil the mains

[@QlausTrobipshe]

Неделю откатает, потом снова разберут и на соседней улице молотом разломают, чтобы тормозные барабаны из ГБЦ сделать

[@ПашаСавинов-в5с]

Точно )))

[@vergiliy197777]

Они картонку подкладывают,не гони)))))

[@mihail611]

ты далек от того, что делают (ТЫ НЕВЕЖА). То, что они сделали - это называется - КАПИТАЛЬНЫЙ РЕМОНТ.

[@TimG333]

Really enjoyed your video. Tremendous respect to that group. I'm sure it's a family business. 👍

[@Patmac74]

That's where your "Cat Genuine Reman" engine comes from

[@rebel9838]

This is infact a Ford assembly line

[@petejohnson8590]

Every worker is fantastic, the conditions they work in are grim, they are great people, greeting’s from Grandfather Pete , from France 🇫🇷🙏👍👍🫶🫶

[@1crazypj]

I had job title of 'Site Service Engineer' for several years, those conditions could be a lot worse. At least they don't have to carry a shovel to dig things out of snowbanks. All in all though, it was a lot of fun most of the time but I didn't like the driving so much (around 75,000 miles a year before even starting work)

[@johnmarlow2887]

I love to see the responsibility given to the young apprentice - carefully checked by the 'Boss'.

[@LincolnSixAlpha]

Interesting no assembly lube on those crank bearings... Or at the very least motor oil... Anything... sweat, spit.. anything! Just not dry.

[@diesel33333ful]

They use all that sand as a lubricant lol

[@ДмитрийОвчаренко-н6ъ]

@@gags730 Братан а при чем тут Россия?

[@nowheretofind888]

around minute 25 they do use some kind of muddy oil to lube this thing

[@timothytrujillo467]

going to ruin the bearings when they fire it up, they dont even clean the parts

[@rebel9838]

The moisture from the desert air is lubricant

[@Orion64-y4w]

Just imagine what these fellows could accomplish with proper tools, training and work area.

[@kenwood9401]

wow great job and fancy tools no one here in Canada could do that lol

[@oniyeah3097]

Será que ese niño cuando tenga 20 años sabrá armar un motor de esos el solo, felicitaciones a todos desde Caracas Venezuela 🇻🇪🇺🇦🇻🇪

[@gothicblood2061]

to say there had No Repair Manual No Fancy Tools there did a bloody good job

[@xl000]

This is how we worked during the middle ages in Europe

[@china-trip]

Wow... !!! My best friend, thanks to you, I enjoyed watching... I'm proud of you for developing day by day.

[@Johnny_VRN_]

Стоял блок на песке, они его перевернули, тряпками протерли и вроде нет песка больше в блоке )))

[@МихаилЧесноков-у2й]

Это чтоб детали лучше притирались

[@ronbuckner8179]

This is fascinating. The workman/journeyman/apprentice system working flawlessly. This kid will have a better paying job in the years to come, then he could ever know about now.

[@ilyaskhan4082]

youtube.com/@ilyaskhan6851

[@ilyaskhan4082]

Please support

[@1212goose]

Not in that shit hole country

[@aliafaaqkhan2176]

Unfortunately No. Even with the amazing skills, most likely this kid will struggle financially. This is Pakistan for you.

[@oldcatmech]

Working were they are this works for them! If you did this where I worked we would run you out the door! The cam bearing in front oil holes go parallel to the bottom of cyl. block! They put the front support bushing back on and it is worn out, should not just slide on! No one pulled the oil galley plugs to clean the main oil galley, so how much shit is in that bore? Sorry, but glad it works for them!! Like the piston ring compressor though! Some one took an old liner and tapered it, got lots of those!

[@CapoSilverback]

Dry bearings? What do you mean torque specs ?

[@oh8wingman]

My sentiments exactly. Not to mention no checking of bearing clearances or ring clearances.

[@robj2704]

@@oh8wingman Not using genuine Cat parts. Take your chances. Probably the Cat parts would be very expensive.

[@ΓρηγόρηςΜπαρμπούτης-κ9π]

Πρώτη φορά βλέπω να σφίγγουν στρόφαλο και πιστόνια χωρίς δυναμοκλειδο

[@BitterDemo]

What do you think Bacon Rhine is used for?

[@noahingram8052]

Better put some motor oil on them right

[@horstmuller7512]

Fantastic tolerances: less then 2 fingers.

[@motorheadproductions865]

And here is a boat load of people saying “oh I need that new 20k snap on set that I use once a year”

[@Noneyabuzines]

I wonder how safe these people would be if that were a jet engine that was flying them over the ocean. This video was not sponsored by Catapillar.

[@ilyaskhan4082]

Please support

[@CapoSilverback]

Screw anyone that says the USA pollution is bad

[@SlackerU]

The clean countries have 6.5ft 12yo children. You can see the pollution too.

[@majestic_irrelevance]

17 toes were smashed to bring you this video

[@emmachamberlain7587]

But all the flip flops survived 🤣🤣🤣🤣

[@benniebarrow348]

Wow……from clean room conditions with automated high tech equipment to do absolutely everything to performing ALL procedures by hand on a dirt floor . Proof positive that there’s more than one way to “skin a CAT”…….😊

[@monera9675]

except engine wont last more than 10k

[@BitterDemo]

Yes there is, Catch a Cat slit a small slit in it's skin and stick an Air Hose with a tube to go inside the skin, It will skin most animals in seconds, That is how they skin rabbits to save their skins.

[@kevinfox8030]

Or kill it

[@1crazypj]

@@monera9675 'Industrial' engine life is measured in hours not distance although I've seen quite a lot of equipment with broken hour meters. You are right though, it will get no where near the 1200 or more hours it should.

[@RRaucina]

@@1crazypj 12,000

[@230919600]

Great hands, young boy very hard working

[@guyness5064]

These people not only work with their hands but also their brains

[@AmazingThingsOfficial]

Thanks for watching 😊

[@user-fault]

Я хренею в какой грязи и условиях делается ремонт двигателя!

[@Анеботакоеже]

У них все ремонты на земле, верстаков нет

[@dethklokful]

@@Анеботакоеже это видно но не понятно почему они не ремонтируют в специальном оборудованном помещении

[@dethklokful]

@@krissilen слушай а есть такое дело все арабские страны отсталые в науке как прочем и Индия но🤔 с арабскими понятно у них есть большое клеймо раба называется ислам, а индия в последнее время где-то налаживает технологический прогресс, в России всё похерено и развалено благодаря преступной путинской власти, Так что климат тут не при чём, на умственное развитие сказываются: Религия мать её ити, и правительство и гремучая смесь это религия+правительство, ведь подстрикать человека к науки можно научными проектами и высокими зарплатами,, но нашей власти выгодно держать народ в нищите, в Индии там понятно перенаселение

[@BitterDemo]

HUH ? Ya don't say!

[@dethklokful]

@استغفرالله и к чему ты это ляпнул тебе завидно раз такие как ты берут русских девушек в жёны мы то хоть девушек трахаем а не ослов и верблюдов как вы понял да

[@juancalle9213]

Great men congratulations from Peru....good teaching de litle boy!....good work! Eng. Juan Calle

[@alimood401]

إبداع وقمت الابداع اساتذا صح 100/100 تحياتي لكم من سرت ليبيا

[@Africanmechanics]

I always admire your work... You and @pakistantrucks inspired me and i started a youtube chanel

[@cristiandemirel1918]

For those who think these guys do a crappy job, I would like to remind you that they manage to keep up and working equipment that is 40, 50 or even 60 years old.

[@ReverendUncleRuckus]

yeah, barely

[@Анеботакоеже]

Клапана притёрли руками,,,итак сойдёт 😄

[@mihail611]

Иногда руками притирают лучше . . . особенно, когда меняют направляющие клапанов.

[@конрад-карловичиванов]

Кто же коленвал на сухую укладывает? -дабы избежать задиров смазываются вкладыши и шейки вала.

[@mihail611]

все улито.

[@КанатИбрашев-у3э]

Да в принципе и пох на стерильность. На год хватит нормально, переберут не проблема. Они все запчасти сами льют. У них работы всем хватает. Где спрос там и предложение. Ни чего личного это просто бизнес. Система налажена.

[@brianwood7480]

I was really impressed when the boss-in-blue showed up for the technical parts, especially the (500 mile warranty) valve-job at the 11th minute. I could write a book about the incredible pre-lube job that WASN'T done on this sad engine. But these guys have children to feed, and they are only doing what they're told to do. So, Salam Alaikem, and good luck to all of them.

[@RRaucina]

Some of the best so called pro rebuilders of engines and trannys in USA have a 15% + failure rate, even with clean conditions. So go figure.

[@mahamani7705]

They are doing there best. The machine works perfectly

[@gorapeer4017]

Mamoo

[@arthurtomczak8474]

If some one would build a work bench these guys would be lost

[@alialSharif-hh9ng]

الْحَمْدُ لِلَّهِ رَبِّ الْعَالَمِينَ فَنِعْمَ أَجْرُ الْعَامِلِينَ

[@StevenSeagull6969]

This would be a great spot to drill for oil, and other toxic chemicals that have been poured on to the ground for over 50+ years.

[@leonv1553]

Hello Amazing. Sure hope the fly wheel bolts need 200 ft lbs, because they got it. Would have been nice to see the crank bearing surfaces lubed, most others were. That nuclear waste poured into the coolant passages to loosen the cyl liners was nasty. It worked though. Kinda horrifying to see it wind up on the ground. Better hope you guys are immune to all the evil chemicals in that dirt. Scary stuff. Looks like that engine will work for years more, you got it done. Not pretty but good job anyway. Good luck.

[@misterhipster9509]

No worries, Allah is in control.

[@Frittrich]

And we are banning plastic straws, while these guys literally dump everything on the ground. topkek

[@knutreitan3379]

I have only one comment: they're doing an amazing job, but they need to learn about sequential tightening of head bolts or crank shaft bearings. Anyways: hat's off to these guys!!!.

[@MrBugsier5]

Why???? you see it runs well... We are way to precise.... This works remarkably good as you see, and it probably wil work fine for years,,, Its not to our standarts, But it works there! lol

[@TruckRollin]

they are also in need of a torque wrench, crazy to see them tightening down all the bottom and top end and going that feels about right. combine the 2 and you know these guys have had at least one of their engines fail due to a bolt coming loose and causing havoc.

[@rockyriveroutdoors9229]

I may be slave labor, but that kid knows more about engine building than most mechanics in America....

[@sugizotakuro]

we may say that their technique is crude. but they did the job and people keep sending those engines to overhaul to them. that means is a job well done. congratulations. with only simple tools, they managed to do the overhaul. and it runs great.

[@ilyaskhan4082]

youtube.com/@ilyaskhan6851

[@ilyaskhan4082]

Please support

[@reyflores3958]

vravo por el muchachito por el prendio el motor saludos a todos desde nueva rosita coahuila mexico😅😇

[@hillbillybeerdranker6678]

Their torque wrench is one grunt for tight 2 grunts for super tight.

[@neonteepee8453]

9 months that's how long that engine will last before it either rattles itself loose or snaps internals. Torque figures and lube specifications aren't just pretty numbers. That and as mentioned in the comments no lube on the journals/bearing etc

[@markthompson9914]

Yeah a torque wrench wouldn’t go amiss. Saves that annoying knock that’ll have after less than 50 hours on her. But hey that’s how they always got work rebuilding em 😅✌️🇬🇧

[@stephenwest9757]

See how carefully the Camshaft was dropped in😂

[@markthompson9914]

@@stephenwest9757 “dropped” being the operative word there 🤣😂👍✌️🇬🇧

[@FatBug12]

If it brakes they just melt it in to something else.

[@pdmpdm999]

What pollution what dirt and yes no hearing protection!! the only torgue was about last nights dinner

[@karlbraun9564]

Hey Amazing Things Official; How about a follow up on how long this "rebuild" lasts.

[@BrotherTay]

First thing we see engine head in the sand nice

[@AsitShouldBe]

it runs perfect at the end in my opinion👌

[@GerardoGonzalez-wn5or]

Not the longest life expectancy on these engines. However I’d give them credit for doing all this work with whatever they can get for tools 👍

[@raydemos1181]

These guys should set up shop in America America, I am certain they would go places

[@Дмитрий-з4о8ш]

Где вы видели ещё, чтоб капитальный ремонт двигателя за один день делали.

[@Дмитрий-з4о8ш]

🤣🤣🤣🤣

[@ИльяУткин-ц3г]

Я на уазик у себя в гараже капиталил, 3 недели времени ушло!

[@hat8415]

The gaskets appear to interlock like jigsaw puzzles when installing so why does the gasket 21:57 not lock together?🤔

[@sheikhkhalid5969]

My car mechanic here in santa cruz, ca, graduated from the streets of Karachi. He owns a Goodyear franchise now, almost never a bay free for too long, pays $6,000 / month rent for the building.

[@sparsrus]

Well, I am impressed, that's what i call all hands-on deck like. literally everyone had a hand or two on this rebuild.

[@ilyaskhan4082]

Please support

[@brianwood7480]

Now I'm sorry & must eat my harsh words. They did lube everything except the crank main bearings. And the engine DID sound nice and smooth. Congratulations and God Bless you & your families, from S.Louisiana.

[@1234563221]

Give those young guys some proper tools and equipment I bet they fit in just fine over here. I’ve done what they are doing in the bush many times in the northern Canadian wilderness no options up there either a lot of the time.

[@alexandrkolchak2035]

можно сразу песка насыпать не думая о последствиях, какая разница, в земле поваляли ставят вкладыши с коленвалом. такие же и трактористы работают до талого пока что нибудь не оторвёт. умельцы в своем деле. насколько долго мужики проживут в таких условиях работы

[@OggyXXXL]

На шляпу себе сразу песка насыпь. Моторы ходят с килограммами говна в поддоне. Нуда, тряпочкой вкладыши новые тереть не стоит, в остальном пойдет

[@sammiceli7645]

Nice coordinated work, men... 🇺🇲

[@josedanielfilhodossantosfi9147]

Queimando perfeitamente Parabéns a turma Belo trabalho

[@danielalvespaulino2120]

beautiful work, very traditional method, more effective, I really like to see the dedication of these employees, congratulations to all.

[@rockymini625]

I would love to see a picture of all the extra parts when they’re all said and done.

[@cryptoanalysts5793]

When he drop the block on the floor 😂😂😂 I say boi 😂😂😂

[@devildead88]

oh my, all wrong !!!! how can you mount an engine in the middle of the dust and dirt ?? sure it will work, but it will last half the miles it can really do

[@Bayuhutamamotor]

Nice coordinated work, men

[@hastyone9048]

Blows my mind in every. Idea thee guys are wearing flip flops.

[@eyasinpaik6872]

Pakistani truck❤️❤️❤️❤️🇵🇰🇵🇰🇵🇰

[@26yellowfin]

Great Job

[@mecanicapesada]

Muito bom o vídeo esta cinta de anel ficou boa

[@JoseSanchez-wz1hg]

Que chulada trabajan la mecanica recuerdomis tiempos felicidades señores los admiro

[@danasixty5402]

This is done Old School. No Wimps Allowed.

[@aliqadri4672]

32:50 what type of pipe is that in yellow in the guy hands.???

[@WODZO1977]

I'm impressed. But I don't understand why there was no cylinder honing.

[@tjlovesrachel]

The new liners were already honed

[@armandosilva3629]

HI GOOD CONGRATULETIONS

[@aliqadri4672]

34:52 what is that thing with some black pipes on it..??

[@miklejackson64]

В некоторых железнодорожных депо, такая же хрень, ещё и бухие.

[@mecanicapesada]

Sao ótimos profissionais parabéns 👏

[@janbastein7355]

I like their safety boots!!!

[@valmirpacifico]

Gosto muito dos vídeos deles...

[@joeyg69]

Germany vehicle manufacturers should learn from these guys. The engines these guys rebuild run for a long time without problems.

[@alscompleteoutdoor9091]

Never knew cats came with sleeved blocks from the factory

[@doutordelmar]

Very good Job , congratulations! Brasil!!!

[@jeanmi974caterpillar3]

super video bravo ..

[@MichaelHeinrich1]

Balancer shaft timing?

[@максим-щ7ю5ч]

Динамометрический ключ не не знаю зачем и так сойдёт 🤣🤣🤣

[@BitterDemo]

What ?

[@mihail611]

есть люди, которые динамиком - срывают резьбу . . . а есть без динамика - делают ПРАВИЛЬНО.

[@arthurtomczak8474]

Cleaning at its ultimate

[@sitinrighthere]

I just came for all the expert comments 🤭

[@nonamecieso9506]

Good jobthe Only mistake is dry fitting the bearing

[@arthurtomczak8474]

Running water. WOW.