How to charge and discharge a NiMH battery pack with Tenergy's TB6B (with voice-over)

[@p0pka_enota]

This video is super helpful. All the essential things with just enough amount of details. This is an example of how to do tutorials.

[@mattieb98]

I get a feeling I'm going to refer to this video very often! This is the most helpful resource I've found for my batteries.

[@nkimokc1]

I've had my charger for 5 years and never knew about auto manual mode thank you

[@riteshsinha5900]

Very detailed . for learners like me .

[@gregbaker859]

Brilliant tutorial- so clearly explained. Thanks 👍

[@daustonian9331]

Great video. Helped me diagnose that my new charger won't go into auto mode. I'll try again after returning this one!

[@jessecastillo7585]

You have to kinda long press it. I thought the same thing as well. Just pushed hard for a full second and make sure you hit enter so the amps are flashing.

[@peterjohnson2245]

excellent video thanks.

[@LSCModels]

Hey regarding the cycling method. After the first cycle does the charger go back into cycle phase on its own or do I have manually do it? Great info brother. take care.

[@Moopyofficial]

Great tutorial!!

[@dennishansen4053]

Best video ❤, thank you so much 🙏🏻

[@jeremybotkin3896]

Just received one of these with a used RC car purchase. This is a fantastic set of tutorials! One question… What’s if it is left on the charger once it is full? Does it have a maintenance feature?

[@TheTenergybattery]

Hi Jeremy, it's a good practice to disconnect the charger from the battery pack when it is done charging - this mainly helps ensure the battery pack lasts longer. For the majority of the time, leaving them connected won't be the end of the world - your charger and battery should be ok if left connected after being charged. For maintenance features, around 3:55 timestamp we cover how to cycle a battery pack (useful for packs that haven't been used for a while), this charger can also discharge your battery pack to 50% for storage (ideal for the times when you do not plan on using the battery pack for a while).

[@jeremybotkin3896]

@@TheTenergybattery thank you so much for taking the time to respond!

[@zdamha6890]

Will it still beep on manual mode when the battery is done charging?

[@mdvhonionscry9279]

Super.. Great.. Love the info.. Knowing not to read the manual.. Thats something i like to do.. But learning from others thats how i do it.. One thing is, i have noticed experienced people intend to do crazy crap.. Obviously by mistake.. So i need help on. 2000mAh NiMH 4.8V

[@kevinrodriguezcabral1425]

Tnx!!

[@sarip79yt72]

great job👍🇲🇾

[@jytechnology310]

nice video! we are RC ni-mh battery manufacturer also!

[@juliangrandpiano]

What is the best storage voltage for both Nimh and Nicd, pls?

[@TheTenergybattery]

Generally it's recommended to store the battery around 40-50% charged. For Nimh and Nicd the voltage will be around 1.28V-1.2V. If you're unsure and would like more info, please reach out to our team with your battery pack's specifications at [e-mail] and our team can help provide more info.

[@twowheeledmayhem1911]

One question, might sound silly but is there any specific way to store these batteries for a long time,E.G. if the battery is not being used for a few months, do I store them at the minimum voltage or maximum voltage

[@TheTenergybattery]

Greetings, that's a great question! For long term storage, like a few months, we suggest storing battery packs that are nimh or nicd at 80% charged. If it's a lithium based battery pack, we suggest 30% instead. Feel free to reach out to us directly at [e-mail] if you have any additional questions.

[@ToTCaMbIu]

what is the value of 1C?

[@TheTenergybattery]

The short explanation is 1C or 1 C Rate is = 1. If you would like a longer detailed explanation feel free to reach out to us directly at [e-mail]

[@kentruong74]

How can I change from manual to auto on amp charge

[@TheTenergybattery]

Hi Ken, please check out this video where we show how to switch from manual to auto around 2:10 kzbin.info/www/bejne/oJuZnIuQitt0aposi=n0OiGrq2P6Ee4rCc&t=130

[@glnobear]

So my sons 8.4 1100mah nimh should max charge at 1.1a and you say to do it at half but the charger doesnt go below 1.0. im assuming just charge it at the 1.0 setting?

[@777tman]

How does it know when it’s full if you do t select voltage?

[@TheTenergybattery]

Hello Wunderwaffe, for NiMH or NiCD Battery packs, the charger will detect a negative delta V when the battery pack is full.