This lathe technique is never taught in school.Making tools,Incision smoother

Рет қаралды 619,301

7 ай бұрын

#latheoperations #technique #creative
This lathe technique is never taught in school.Making tools,Incision smoother
This additional lathe tool is rarely known by mechanics,This is one trick for smoothing cut marks from lathe blades. With this tool, the turning results become smoother without using sandpaper
Lathe
Lathe technique
Machining job
Making tools
Creative idea
Welding
Welding aluminium
Tig welding
Making gear
Thank you for visiting, don't forget to like and subscribe for support, thank you

Пікірлер: 68

@Raul28153 6 ай бұрын

it is called burnishing and yes it is taught in trade schools

@KULITEKNIK001 6 ай бұрын

Thank you friends for telling me the nickname for this tool

@pieteralbada3279 4 ай бұрын

Like this and other trick we’ve learned on the good old technical metalworking school years ago when i was 16/17. Now i am 59! Make your own tools. No CAD, no CNC just old fashioned machinery!

@amitbhau 4 ай бұрын

Can damaged shock absorber crome plated pipe having minor scratches leaking hydrolic oil treated with this tool 🤔

@userrnamenotavailabl 3 ай бұрын

I studied machining at trade school, completed an apprenticeship, while I had heard of burnishing techniques, I never saw anything like this.

@sierraecho884 4 ай бұрын

What you need is one ball bearing on either side. You are also work hardening the surface.

@ThisIsToolman 7 ай бұрын

Excellent. Roller burnishing is an excellent way of obtaining a very fine finish and cold working the surface to add hardness. This is a good process for finishing hydraulic seal surfaces. Let’s see you make a tool for ID burnishing.

@computername 7 ай бұрын

I have been struggling with good surface finish on my old lathe, so I think that's a curious technique, and an asy to make setup. So now I'm contemplating to make this instead of a toolpot grinder. But it seems almost too easy so there has to be a catch.. How does this surface compare to a ground surfaces? Apart from the cold working of course, is this as good as a ground surface for sliding seal surfaces, press fit, tool tapers etc.?

@KULITEKNIK001 7 ай бұрын

Thank you friend, next time I will try to make it

@mattj5025 4 ай бұрын

⁠⁠@@computernamein this setup, it won’t be as accurate as a ground surface. It would give a smooth enough surface.

@computername 4 ай бұрын

@@mattj5025 Thanks for the comment. Used a Dremel as a toolpost grinder in the end. Not the greatest thing in the world but does the trick.

@elcomunicador3722 4 ай бұрын

But the sphere leaves ripples on the piece. If I had only used the bearing it would be more homogeneous.

@user-ks1eb4cg3n 6 ай бұрын

Возьму на заметку!

@garyweber6413 7 ай бұрын

Bro your my new machine shop teacher.Thanks

@KULITEKNIK001 7 ай бұрын

Thank you

@GutoPereira 3 ай бұрын

one of the most valuable lesson I see here is to never let the lack of tools stop you from creating... have a lathe but no mill? no problem want a tool? why not make it?

@KULITEKNIK001 3 ай бұрын

I'm planning what needs to be prepared

@Utomoteknik 7 ай бұрын

Ide yang mantap kawan. Belum pernah terpikirkan oleh saya , tentang teknik ini. Semoga sukses selalu.

@KULITEKNIK001 7 ай бұрын

Semoga menginspirasi teman, sukses untuk anda juga

@andrebartels1690 4 ай бұрын

Very nice idea for a good tool from simple parts 👏

@KULITEKNIK001 4 ай бұрын

Thank you

@BITTYBOY121 4 ай бұрын

Great idea - 10/10 !

@KULITEKNIK001 4 ай бұрын

Thank you

@BITTYBOY121 4 ай бұрын

@@KULITEKNIK001 You are most welcome - Have a great 2024 ! :)

@ajuste4369 7 ай бұрын

Excellente idée ! Bravo !

@KULITEKNIK001 7 ай бұрын

Thank you

@user-iq9uw6ry2m 7 ай бұрын

Во всех справочниках,при Союзе,было.

@ronwhittaker6317 Ай бұрын

nice

@slotcarbob Ай бұрын

So, after I touch off, how far do I move in to "polish"? Thank you.

@KULITEKNIK001 Ай бұрын

🙏👍👍👍

@geertrebreps191 4 ай бұрын

Das nennt sich "Oberflächen verdichten". Die Technik wir zwar vorwiegend bei gedrückten Teilen angewendet, aber sie ist weder neu, noch wird sie nicht gelehrt. Die in DE verwendeten Werkzeuge sind nicht ganz so "einfach". Und wenn man den Drehmeissel gelegentlich schleifen und eine vernünftige Drehzahl verwenden würde, sähe die gedrehte Oberfläche nicht derart "angefressen" aus.

@alexsamson7090 5 ай бұрын

Токарем не рождаются, им становятся. Но смекалка и правильные руки нужны. Я, когда пришел, учеником, смотрел на токарную работу широко раскрытыми глазами. Поражала простота некоторых приспособлений, но в то же время, без них никак. Просто, до гениальности.

@elcomunicador3722 4 ай бұрын

Но сфера оставляет на изделии рябь. Если бы я использовал только подшипник, он был бы более однородным.

@user-pt8rt4bs3l 4 ай бұрын

Super

@davidstud3952 6 ай бұрын

very nice idea with the ball bearing 👍

@KULITEKNIK001 6 ай бұрын

Thank you

@elcomunicador3722 4 ай бұрын

from minute 6:30 to 6:45. Only with the bearing it is much better, because the sphere leaves undulations in the piece. If I had only used the bearing it would be more homogeneous. с минуты 6:30 до 6:45. Только с подшипником гораздо лучше, потому что сфера оставляет волнистости в изделии. Если бы я использовал только подшипник, он был бы более однородным.

@KULITEKNIK001 4 ай бұрын

Thank you for the advice

@pedrovitorguedesdias8558 7 ай бұрын

Como é o nome deste processo

@Francesco-ti1vx 7 ай бұрын

Fare le salsicce si chiama

@reneschaap8091 4 ай бұрын

als je gereedschap maken niet op school gehad heb zou ik me schoolgeld maar terug vragen !!

@mattj5025 4 ай бұрын

I’ve never seen someone mount a 3 jaw chuck in a 4 jaw chuck. There must as much play or more than a clapped out old Bridgeport…

@mrechbreger 4 ай бұрын

I saw that a few times already. You always need to think what you are trying to do if it's fine and within the range of your allowed tolerances nothing speaks against it.

@mr1hander 4 ай бұрын

very nice

@KULITEKNIK001 4 ай бұрын

Thank you 👍

@takwaimak2375 Ай бұрын

表面加工法😂😂😂叫做表面懶嘉宮加工冷硬法

@avoidspam6561 4 ай бұрын

В школе вообще токарные станки не сильно-то изучают, ну может по дереву разве(и то во времена СССР). А про радиальные, конические и прочие накатки - любому токарю известно.

@user-iz5jc2bn9l 7 ай бұрын

Это все прекрасно знают,я учился в1974 г,все показывали рассказывали,а ты наверно только узнал ахринеть как ты отстал

@computername 7 ай бұрын

Why do you have to hate on people who share knowledge. Who cares if you already know it? What free education have you ever provided to strangers? Seriously, people like you are cancer. Go back to your cave and leave people alone.

@albertoramonacosta1212 6 ай бұрын

Buen trabajo amigo parece cromado pulido de diez Arg

@walloguzman 4 ай бұрын

Hubieras hecho la tuerca conica, para que se sostuviera el balín

@KULITEKNIK001 4 ай бұрын

Gracias por el consejo

@hellbehemoth1235 5 ай бұрын

@edysanjaya160 7 ай бұрын

Bang, berapa harga mesin bubut yang anda pakai?

@KULITEKNIK001 7 ай бұрын

Murah bang,apa anda tertarik

@user-se4kf1lx1b 5 ай бұрын

That's how a lathe is used like a milling machine.

@LevT. 4 ай бұрын

А зачем шарик, может ребром подшипника катать?

@theThinkerator 3 ай бұрын

it is hard to actually tell what is working and what is not, with all the "Editing" happening.... goes from one poor looking finish to an excellent finish.... but doesn't show how you got there.

@johnrabbitt1888 2 ай бұрын

Dude is making vids of himself creating tweaker memorabilia 😂 how did u cut it so crooked I mean doesn't even seem possible

@KULITEKNIK001 2 ай бұрын

Thank you

@alexanderallerborn1184 4 ай бұрын

... пи.............ц , обработка и технологии , как при Царе-горохе .........., ребята , вы, чего накурились .......... ??? 😃

@pinkusfloyd9118 Ай бұрын

Warum einfach wenn's umständlich auch geht. Diese "Drehtechnik" wird deshalb nicht gelehrt weil sie absoluter Mist ist. So was bescheuertes habe ich selten gesehen und das in 45 Jahren in einem Metallberuf.