This Should Be Your Next Purchase! XK A280 P-51 Mustang 3D/6G System 560mm 4CH RTF!

This Should Be Your Next Purchase! XK A280 P-51 Mustang 3D/6G System 560mm 4CH RTF!
XK A280 P51D Playlist: • XK A280 P51D Mustang B...
XK A280 P-51 Mustang 3D/6G System 560mm Wingspan 4CH RTF for Beginner
www.banggood.c...
XK A280 P-51 Mustang 560mm Spare Parts Plastic 4-Blade Propeller - 1 Piece
www.banggood.c...
XK A280 P51D 560mm Gyro 6G/3D RTF
s.click.aliexp...
XK A280 P51D 560mm Gyro 6G/3D RTF
s.click.aliexp...
3pcs XT30 / XT-30 Male to JST Connector Adapter(C93-3)
amzn.to/3IBPomY
4pcs GNB 550mah 2S LiPo Battery 90C 180C with XT30 Connector
amzn.to/41GbMT1
GNB 450mAh 2S HV LiPo Battery 7.6V 80/160C XT30 Plug
amzn.to/3MAnOba
GNB 2S 450mAh 80C 2S LiPo Battery JST Plug
www.banggood.c...
FullyMax 2S 600mAh 25C LiPo Battery for XK A280 P-51 Mustang 560mm
www.banggood.c...
4pk Gemfan APC Airplane Prop 5050 6040 7050 7060 8040 8060 9045 9060 1050 1060 1070 1155 1260
s.click.aliexp...
APC 07050E Electric Propeller 7 X 5E
amzn.to/45f9Gwn
5Pcs APC 7x5 E Thin Electric Composite Prop LP07050E
amzn.to/436JHp2
4pcs/lot APC Nylon Propeller (Color : 4pcs 7X5)
amzn.to/3qh6LU3
Saker Contour Gauge (5 Inch Lock) Profile Tool- Adjustable Lock
amzn.to/3BTWFLe
RadioMaster TX16S MKII V4.0 16CH Hall Gimbals ELRS 4in1 EDGETX OPENTX
s.click.aliexp...
RadioMaster TX16S MKII Hall Gimbal 4-IN-1 ELRS TX
www.banggood.c...
RadioMaster TX16S Transmitter
www.banggood.c...
Banggood GCRC
www.banggood.c...
You can help support us by using our affiliate links. A small commission (At No Cost To You) helps us buy more items to review. As an Amazon Associate I earn from qualifying purchases.
@GroundControlRC #GroundControlRC #GlueAndFly #GCRC #GFS #DIYPlanes #XKA280P51D #Warbird
#TinkerzLab
@tinkerzlab
See you in the Air!
Build, Fly, Crash, Repair, Rinse & Repeat!
Ground Control RC™ Glue & Fly™ Series DIY Planes
Consider Supporting Our Channel by becoming a Patron at: / groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!
See Us On KZbin | Patreon | Facebook
/ @groundcontrolrc
/ groundcontrolrc
/ groundcontrolrc
/ @tinkerzlab

[@jaymccaffrey7463]

does your recommendations for new battery and prop work the same for the 700mm model?

[@GroundControlRC]

I use the same 7x5 prop on my 750mm p51d but I have a different motor than it had stock. I use a larger 3S LIPO in my 750mm p51d than I do in this one.

[@Warloghe]

Had mine out of the first time the other day, out of the box no issues was really nice.

[@GroundControlRC]

I'm glad you like it. Great flying little Warbird!

[@pinarellospeedracer]

It looks like you live in AZ I live in Scottsdale AZ

[@GroundControlRC]

I'm in Northern New Mexico but the terrain is certainly similar.

[@rhysespeace]

Outstanding! Guess the only question I have left is, have you flown it on 3S? I'd definitively like to know, as I've got a draw full of 3S Lipos that would fit this flyer, & would be the icing on this cake! I was already considering buying the parts, a UMX Voodoo board, & linear servos, for that reason alone. As always, much thanks for the content & commitment 👍

[@GroundControlRC]

Thank You Much! I don't plan on a 3S setup as the performance on 2S is great and it keeps it light. I would replace the stock ESC before using a 3S as it's only a 10A ESC at best. I would say on 3S you'd have unlimited vertical with the right prop ;-) See you in the Air!

[@yashnagla9196]

Does the plane have safe mode where it doesnt tip over when turning or no so i know whether to buy it or not

[@GroundControlRC]

It does! 6G Mode limits the angle and provides auto-leveling just like Safe Mode. 3D Mode is unrestricted and allows aerobatics.

[@Mike-p7t1b]

5x7 proved n true haven't burnt up the esc but still love to fly my other one with my grand son on stock I have 3 xk a160 n all burnt out the stock receiver n what one did you use to make em work even stock I've ordered two or three Amazon receivers n nothin they won't bind even ordered from motion rc stuck with 3 xka160 planes perfect shape but yeah they won't fly on any receiver I've ordered got pics exex trust you 100 percent don't even Wana up grade just want them to fly! What the rite? Please help😢 lol perfect shape bought esc mother's receivers n nothin ile trust your reconfirmations mean while yeah 3 perfect air frames that are not flying ? 3 receivers nothin works hooked up every thing got some of them to get ailerons rudder elevator nothin on the moter ?

[@GroundControlRC]

You may need to program your throttle stick with the ESC. If you're getting aileron, elevator, and rudder working you're binding up to the receiver but it sounds like it's not seeing the range of the throttle stick.

[@carlosjuarez7449]

I just replaced the esc in my xk160 it took a couple of minutes to bind the motor, but the other channels were working fine.

[@abruptlyblunt]

i don't know why it just popped into my head to lookup your video and check the price of this plane but i just got the last one for $113 from usa warehouse. I still can't afford it but it was going to get more expensive the longer i waited so it was now or never........

[@GroundControlRC]

Congratulation! I didn't think they would last long at $113. You're going to have a blast flying this P51D ;-) See you in the Air!

[@coloradofotomatt]

Couldn't resist! I picked one up from Banggood for only $95! BUT! I am absolutely stumped by the wiring...the instructions are terrible and new enough to this $port that I need assistance. None of the setup videos I have watched cover these details. Thanks in advance from a fan of your channel.

[@GroundControlRC]

I'm glad you got one as it's one of my favorite sub-250g planes. I'm not sure what you mean by the wiring?

[@coloradofotomatt]

@@GroundControlRC I sure appreciate you responding! I'm a noob for the electronics of RC so your help is appreciated. I'm speaking of the diagram for the connections from wing for lights, ailerons. I simply can't understand what little info is in the instructions.

[@butchking154]

@@coloradofotomatt the wiring with the red plug ins are for your lights they plug into the right bank and white on the left bank the is a white plug with 3 connecters that is for your ailerons it goes 2nd back on your servo good luck

[@butchking154]

make sure red wire is in pos and white is in the neg post u have to look close u will see pos and neg

[@davidsapir3764]

@@coloradofotomatt Aren't the assembly instructions awful? It's not you, it's them lol. Mine arrived yesterday and I had to watch several videos before "where" to plug all that wiring in made sense because everyone skips that part! The good news is it's actually very easy and straightforward to explain. There's only one 3 prong connection, and it goes in to the 3 prong port right beside the other connection that's already plugged in on the side of the double servos for the ailerons. The very first page of the manual shows a picture of the servos and where this 3 prong aileron connection goes. Gently move the servo arm out of the way to make it easier to access this port, and make sure the wire clears the servo arm after its returned to its normal position. All of the remaining wires are the same 2 prong connections, and all of them are just the lights. They all get plugged in to that multiport rectangular board that already has one connection plugged in on opposite corners. Plug all the remaining two prong connections into that board, it doesn't matter where or in what order, and you'll have an extra port left unused. Tweezers and a very small screwdriver head really helps, and you have to keep the wing close to the fuselage because these wires don't have a lot of slack. It took me about 15 minutes or so to gently and carefully plug them all in. After all the wires are plugged in only 5 screws are required to complete the build but its confusing "what" screws to use because they give you several extra screws you don't need.The two longest black screws are used to secure the wing and tail assembly, use one of the small black allen head screws for the propeller nose cone, and two small screws to secure both bombs. You'll have several screws left over, no worries. Hope this helped if you're still stuck and I'm happy to answer any other questions you may have.

[@mikelinderman8514]

so far my A280 fly's better without the drop tanks, but being a new pilot those tanks have saved mp plane many times, so far about 20 flights and 7 crashes and its still like new, thanks for all your content we have had loads of fun thanks to your advice

[@GroundControlRC]

Thank You Mike! I left the drop tanks off just to save weight. Fantastic plane and I had it in the air again yesterday. I can't stop flying it. I check every week to see if WLToys/XK have come out with another one ;-) See you in the Air!

[@HORRUS29]

I just got this plane but the ailerons don't move very much. Not even in duel rates. And when I give it a little throttle the elevator moves down all by it's self. Do you know what could be the issue? I'm not going to try and fly it like this.

[@GroundControlRC]

I haven't used the Stock TX for a very long time but if I remember correctly it has a switch for high rates and low rates. Much more movement on high rates. I'd say when you initiated throttle that initialized the gyro which I'm guessing is why the elevator moved down. Did you calibrate the gyro with the plane on it's wheels? I always recommend calibrating the gyro before the 1st flight. Test the modes and make sure everything is correcting in the proper direction. Switch to 3D Mode and you will notice more movement on the control surfaces. You may have to adjust the linkages to get the amount of control surface movement you want, I always do. In fully stabilized mode you're not going to have a lot of control surface movement.

[@HORRUS29]

Thank you for the quick response. I completely forgot to calibrate the gyro, so I will try that before the next flight. Do you have a video on all the upgrades you did on this plane? I saw your prop video and the one where you showed the better batteries, but didn't see where you swapped out the receiver. Did you also put better servos in it?

[@GroundControlRC]

@@HORRUS29 All the Electronics are still stock. The only things I've changed are the battery and prop. Here is the playlist: kzbin.info/aero/PL_YiEhY7O1WagtRqZijJuifzUuhE5qgmc

[@nickharrison8360]

I love that you test the non popular planes. Definitely trust your test

[@GroundControlRC]

Thank You Nick! I hope they make a full line of these Warbirds, and if they do, I'll be picking up a couple more. See you in the Air!

[@ratcat7668]

cannot hand launch - mines crashes to the left each time. Aeilerons. rudder etc are all straight - what am I doing wrong? I have had one good flight.

[@GroundControlRC]

It could be torque roll. With the stock prop I hand launch at 80% throttle. With the 7x5 prop I hand launch at 60% throttle. I release using a moderate chuck and a slightly upward angle.

[@ratcat7668]

@@GroundControlRC Thank you. Will try that.

[@ratcat7668]

@@GroundControlRC Thank you for your advice. I was about to try it when I noticed one of the two screws that hold the motor bracket was sitting out about 3/4 mm. When the prop was spinning it would pull the right hand side of the bracket out making the prop face off to the left which was obviously causing the plane to pull off to the left . I took it home, tightened it - went back, hand launched... Dead straight!!! Sooooooooooo happy. cheers.

[@GroundControlRC]

@@ratcat7668 Success!

[@gerrymorris1698]

Can a newbie fly this in a docile manner until they get enough confidence to experiment

[@GroundControlRC]

It's pretty docile in stabilized mode but it can maneuver and fly fairly fast. I don't know what your experience level is but it would make a great 2nd plane. For someone that's never flown a plane I would recommend something like the Volantex Sport Cub 500. Volantex Sport Cub 500mm Wingspan 4CH Beginner Airplane RTF www.banggood.com/custlink/KvGF0cQ4tM Volantex Sport Cub 500mm RTF amzn.to/3Sjlaun Here's my playlist for the Sport Cub 500: kzbin.info/aero/PL_YiEhY7O1Wb3D4BFIVkhCQwKy5do3Bs8

[@gerrymorris1698]

Thanks for the speedy response I'm ok flying ...no Evil Kneivl stuff... More concerned with take off difference and landing technique on a tail dragger vs tricycle Thanks again btw...the wife already ordered one on sweet flash deal and I'm pretty stoked....and I think she may be planning on taking over the warbird 😅😂

[@GroundControlRC]

@@gerrymorris1698 Sweet! I actually think the tail draggers are easier to takeoff and land than the tricycle gear. You won't have any problems. It's the best micro warbird I've flown.

[@gerrymorris1698]

Great! We'll be staying tuned in on this end!

[@pinarellospeedracer]

WOW what a sweet flying plane, I'm hooked I want one

[@GroundControlRC]

It's a great flying little warbird ;-)

[@warehouse1429]

Ahhh now I see your links, bummer wish I had done more research, but thanks for the links now I know

[@GroundControlRC]

No worries! See you in the Air!

[@warehouse1429]

I just realized I got the volantex 750 mm p51 mustang, they look exactly the same online. You got the wltoys one correct?

[@GroundControlRC]

@@warehouse1429 Yes, the XK / WLToys A280 Micro Brushless P51D. They do look exactly the same in the image. Even the landing gear looks identical.

[@Doggeslife]

If only it didn't have the cannon shell-size holes across the cocklpit. ;-) No idea why they did that. I guess I need to order an airframe eventually and build one up. The parts would total up to around $60. But I just don't know where I would fly it. I kinda miss 2020 when Covid had all the schools closed,people were staying inside and the park field was all mine. ;-) Happy flying!

[@GroundControlRC]

Yes, and I could have done without the LED lights ;-) Even with all that Bling it's a fantastic Micro Warbird. I really hope they come out with a full line of these. I can't stop flying it and I've had it out for (6) flight sessions in a row so far and I'm taking it out again tomorrow ;-) I wish you had a big area in which to fly. It's too bad they don't have any BLM land close. Urban sprawl never stops.

[@shahrulnazmi-to5ky]

Hi from Malaysian, i want to ask did you prefer a 2 blade or 3 or 4 blade ?

[@GroundControlRC]

Hello! I prefer the APC Style 7x5 2-Blade Prop as it provides much better power and I can still get 7 minute flights using the GNB 2S 550mah LIPO. Fantastic performance with that setup. See you in the Air!

[@shahrulnazmi-to5ky]

@@GroundControlRC thanks for your information mate , cheers see you in the air too

[@StickJockeyFPV]

I've had some transmission / motor issues with my 400mm warbirds lately and you're the first person I've heard mention that they aren't likely to hold up after a while. Can you tell me why that is? Also, is there any issue getting the propellers you recommended to fit right? The hole looks like a perfect circle where as the stock propellers have more of an oval shaped hole.

[@GroundControlRC]

Yes, the motor has a metal gear on the shaft that meshes with a plastic gear and that wears out over time. You will also have some pretty good bumps with the prop that can damage the shaft and gears. Brushed Motors also wear out. I stated in one of the videos that you should make sure to get the pack of spacers with the prop. I used a couple of spacers on mine to fit the prop nicely.

[@lyndoncook4508]

I just got one in the UK for £120 delivered on the strength of this video it looks awesome 👌 I just need to get a trainer and a simulator now as I've never flown before 🤦‍♂️ 😅 it's only coming with one battery what type do I need connectors etc for spares, brilliant video by the way

[@GroundControlRC]

You certainly picked a good one to start. I always provide links to things in the Show Notes. The Battery Connector on the Plane is a Red JST Connector. The batteries I like to fly with have XT30 Connectors. Here is a link to the Batteries I use and Adapters so they will connect to the plane. 3pcs XT30 / XT-30 Male to JST Connector Adapter(C93-3) amzn.to/3IBPomY 4pcs GNB 550mah 2S LiPo Battery 90C 180C with XT30 Connector amzn.to/41GbMT1 I hope that helps.

[@SteveGergetz]

Thanks for all of the awesome vids. Couple questions if you don't mind? 1) Are the stock props quite flexible and forgiving that they won't break easily in crashes? 2) Have you had any crashes with this plane, and how much (and what kind) of damage did it take? 3) You mentioned in the video that if someone asked you right now which brushless warbird for a beginner, this would be your first answer. But...what if we take the warbird part out of the picture, and limit the price to under $130? So in other words, what brushless 4-channel EPP plane under $130 would you recommend (whether warbird or trainer or any style)? Thank you!!!

[@GroundControlRC]

Thank You Steve! The stock prop is quite flexible and I would think quite durable. I haven't had a crash with it yet but in one of my 1st flights, after landing, I accidentally bumped the throttle switch and ran it into the bank at a pretty good clip with no damage and no broken prop! It passed my durability test ;-) I don't know of another plane that's 4CH, Brushless, and sub-250g for less than $130 US. Even the Arrows Pioneer cost quite a bit more. You might find one that's made of EPS foam for less but I won't touch EPS foam as it's not durable as all.

[@SteveGergetz]

@@GroundControlRC Well, there are some.... 1) Flying Fish is still available for only like $110 or so. Was there a reason you didn't mention this one? 2) XK A900 is around $100. I absolutely loved my A600, but I was a poorer pilot back then, and the A600 was no very durable. The A900 is supposed to be nearly the same plane but in EPP. (I'D LOVE LOVE LOVE IT IF YOU'D REVIEW THIS ONE!!) 3) XK J3 Piper Cub is brushless, EPP, 4-channel, and under $130...but I think enough people have complained about poor flight characteristics and durability issues (parts other than the foam) that this one is off the table. So what about 1) and 2) above, and are you sure there's nothing else we're forgetting with these criteria?

[@GroundControlRC]

​@@SteveGergetz Hi Steve! I thought you were referring to beginner planes, as I was, so I didn't mention the flying fish as it's PNF with no gyro and no RX. I can only recommend the planes I've flown and I didn't recommend the XK J3 Cub after my review. Limiting the choices to $130 or less really cuts down the number of great flying planes. I published a list of the best RC Planes I've reviewed that required No MODs some time ago and that list is still valid today. Not all are Beginner, not all are Sub-250g, or $130 or less so the Flying Fish, Arrows Pioneer, and Radiolink A560 3D Plane are definitely on that list as well as others. Here's the video: kzbin.info/www/bejne/r5uki6BsgrGEack

[@SteveGergetz]

@@GroundControlRC Thanks brother. You've done a TON of good for a TON of people in this hobby with your countless insightful videos, your countless experiments and discoveries, and your active replies to our comments and questions on your KZbin channel. I really appreciate it all.

[@GroundControlRC]

@@SteveGergetz Thank you so much Steve!

[@vincenttuttle3643]

did you modify the red nose to fit with the 7X5e prop i might have order the wrong prop set

[@GroundControlRC]

Hi Vincent! I did modify the cutout in the spinner to match the profile of the 7x5 2-blade prop. I used a shape duplicator to get the exact shape I needed for the spinner modification and that worked a charm. Here is a link to the video where I discussed this and provide a closeup of the spinner. kzbin.info/www/bejne/laCTcoyNebN0f9U

[@-PHANT0M]

Will this plane work with a Spektrum receiver?

[@GroundControlRC]

It states that it will but I've not tried attaching a separate RX. I've been flying it with the Stock RX.

[@butchking154]

i bought 4 of the 7/5 e props and they spin on the shaft would not tighten up

[@GroundControlRC]

You have to put a spacer at the back and front of the prop.

[@butchking154]

@@GroundControlRC i did the prop spins on the spacer any idieas

[@butchking154]

do i need the e flite adapter eflm 1933 for the 7.5 prop

[@butchking154]

@@GroundControlRC do i need the eflite prop adapter eflm 1933 for the 7.5 prop?

[@gordonv2456]

Do you do any break in to the control surface hinges before flight? You fly it pretty fast compared to a high wing trainer.

[@GroundControlRC]

Hi Gordon! With these foam hinges I disconnect the linkage and work the control surfaces by hand until there is much less resistance. These Warbirds love speed ;-) See you in the Air!

[@connorsmith7168]

Would you put a new upgraded motor in it, I think I have issues with mine.

[@GroundControlRC]

Sure! It's a great flying little warbird and I'd say the best flying micro warbird I've flown. I'd put a new motor in it if I needed to replace the stock motor.

[@connorsmith7168]

@@GroundControlRC what motor would you put in, looking at one that can handle a 3s, I tried putting a 3s in but the motor didn’t like it

[@GroundControlRC]

@@connorsmith7168 The stock motor is an 1806 2000kv and works very well on 2S with the APC 7x5 Thin Electric 2-Blade Prop. If I were thinking of using a 3S I'd probably look at something a bit bigger like a 2206 1500kv Motor. Remember this is more weight up front and you may move the CG. Also, you're probably going to have to fabricate a new motor mount.

[@joelfildes5544]

Hi there,Can’t wait for mine to arrive,but,can you point me in the direction of a cheap ‘multi’ charger ?i’ll have three ‘standard’(stock) batts to charge,and I’m not sure what to get…cheers !Ive ordered the 7x5 Gemfan props from Ali Express…none of the others were available (uk here)Thanks for doing all the hard work,I’m looking forward to this.PS…What was the rudder adjustment you did ?…I WANT IT ALL ! Ha,ha,cheers.

[@GroundControlRC]

It's such a fun micro warbird! I've never used the SkyRC B6 charger but they're almost legendary in their popularity and inexpensive for what you get. SKYRC iMAX B6AC V2 AC/DC Dual Power Professional LiPo Battery Balance Charger/Discharger amzn.to/49quLpV You'll most likely need to order additional charging cables and/or adapters to match your LIPO connectors. I've had to fabricate many charging cables and adapters for my charger over the years. I adjusted the linkage for the Rudder Servo and Control Horns to get a bit more movement on the Rudder. I publish all of my Setup Files on our Facebook Page once I have an aircraft flying the way I want. Here is a direct link: Setup File - XK A280 P51D 560mm RTF (TX16S): drive.google.com/file/d/19tbTxu8pN0vJEjNo8BW4U1LXcJHU7uCa/view?usp=sharing

[@joelfildes5544]

@@GroundControlRC thanks again for all the info,I actually own a Spectrum DX6i from my old Parkzone Spitfire days (a while ago now) I don’t suppose that would bind with this plane ? I realise things have moved on pretty quickly in this game…no AS3X when I learned to fly ! I learned by NOT crashing…eventually! Ha,ha…(I’m no electronics genius,but I CAN rebuild a car engine…go figure ?!?!)

[@GroundControlRC]

@@joelfildes5544 It does state it has (2) additional RX ports so you might be able to use an SBUS DSMX RX to bind to your DX6i. Here is the text from the product page: The flight control system adds two receiver conversion socks, 5V is suitable for Futaba (S-BUS)J and other receivers with S-Bus ports, 3V is suitable for DSM receivers.

[@joelfildes5544]

@@GroundControlRC Cheers,I’m not really sure what any of that means ?(do I have to plug my little ‘bind key’ in somewhere?) looks like I’m going on a steep learning curve,all part of the fun!

[@GroundControlRC]

@@joelfildes5544 It means the stock Receiver board has (2) additional port to plug in a different Receiver so you can use a different protocol that your Transmitter supports.

[@scu-dub]

Hey man what is the esc amperage? Can a 3s be run in it?

[@GroundControlRC]

Unfortunately, the ESC is not labeled. Some folks have posted that it is a 10A ESC and should be rated for 3S but mine runs pretty warm on 2S with the 7x5 Prop. I would probably put a larger ESC in it for 3S just to be safe.

[@scu-dub]

@GroundControlRC thanks man👍🏼you just saved me from going down in flames lol✌🏽

[@warehouse1429]

Man i had thought I had ordered the rtf but it’s a pnp, for $125, it’s already ordered from banggood. I looked online I can’t find one now in rtf. I checked KZbin and figured they stopped making it. Then found this video, glad it’s good plane! But I’m a newbie to air RC hope I can get it flying

[@GroundControlRC]

Hum.....I've only seen it in a RTF version. Are you sure you didn't order the Volantex P51D 750mm PNF? It's currently priced at $125.99 at Banggood. I have the Volantex P51D 750mm PNF and it's a fantastic plane but not a beginner plane. This one is great as a beginner Warbird and you won't have any problems flying this one. See you in the Air!

[@warehouse1429]

Omg yes that’s exactly what I did, i just ordered it yesterday and immediately thought I had ordered that wrong one. So… I did want the larger wing span. But thought it was rtf . Also I have the Eflight umx turbo evo coming as my first plane after the 400mm guys

[@warehouse1429]

I found your series in the volantex 750, thanks so much for all the hard work much appreciated! Glad to have found your channel 👏👍✈️🛩️

[@GroundControlRC]

​@@warehouse1429 Well, you're going to have some excellent planes. I can't believe my Volantex p51D 750mm is still flying. That was my 1st Warbird....Awesome!

[@GroundControlRC]

@@warehouse1429 Thank You!

[@jhilliard280]

You can fly this plane on 3s battery with stock esc. Spektrum 300mAh 3S 11.1v 30C LiPo Battery: JST Connector. Really wakes this plane up! Enjoy!

[@GroundControlRC]

Thanks! I've read some post of 3S flights. I may have to test that with a smaller prop. Do you know how many amps you're pulling and what prop are you using?

[@jhilliard280]

Unfortunately not sure how many amps, though haven’t had any issues so far and just to be sure, I use the the stock prop though cut off two blades. Though I’m sure there are alternatives with smaller props too . I also made a small hole as an air vent to keep her cool. Next step is trying to figure out how I can fly her on my Spektrum nx6. Love this thing! It looks incredible with a finishing coat of poly coating too.

[@GroundControlRC]

@@jhilliard280 Sounds like a very good setup. This plane is awesome!

[@jhilliard280]

I would love to see your review of the umx voodoo next! Not as scale looking as the 280 in the sky though it’s flight envelope is incredible. Keep up the awesome vids mate! Thanks

[@iJaayyp]

Is it as easy as plugging the battery you mentioned without any other electrical component?? And this hasn’t burnt out your esc yet??

[@michaelhoward4402]

This is a great bird I have one myself, only issue I have is the esc has an electrical smell to it after only one flight, I'm going to replace it. I was going to stick with the original esc replacement apparently they are more robust, are there any higher amp esc that you would recommend that would be suitable for the 280 ?? Great videos you've put out on it so far btw 👍🏼

[@GroundControlRC]

Thank You Michael! I would check how hot the ESC is getting after flight. Mine gets pretty warm flying hard with the 7x5 Prop and I've put approx. 50 flights on it so far. I haven't looked into a replacement ESC and someone stated the ESC is putting full 2S voltage to the board. I will have to test and verify the voltage output of the ESC and see if the board works fine with a standard 5v BEC. If it works well with 5v input to the board, I like the HobbyWing ESCs and would probably put a 12A in it. s.click.aliexpress.com/e/_AV9Nyd

[@michaelhoward4402]

@@GroundControlRC thanks for the information I will definitely check temp after flight and will run it until it burns out more than likely ha ha, I will get the 12 amp, is 20 amp too heavy you think?

[@GroundControlRC]

@@michaelhoward4402 I will definitely run mine until it burns out ;-) I haven't checked the weight and size difference between the 12A and 20A. Usually it's significant but you never know. I've had 20A and 30A ESCs that were nearly identical in size and weight.

[@michaelhoward4402]

Thanks again bro 😎

[@GroundControlRC]

@@michaelhoward4402 You are most welcome. See you in the Air!

[@judgemally5034]

Sold...

[@GroundControlRC]

Blue Skies and Calm Winds ;-)

[@snauzze7007]

So you running original battery on this or you using a bigger 2s?

[@GroundControlRC]

After switching out the stock prop to a 7x5 Prop I've been running with a slightly lower capacity but much higher "C" rated LIPO. They provide all the needed power with the more aggressive prop and approx. the same amount of flight time. I Like the weight and power of the GNB 2S 550mah 90C LIPO but it does come with an XT30 connector so I also use an XT30 to JST Adapter. 3pcs XT30 / XT-30 Male to JST Connector Adapter(C93-3) amzn.to/3IBPomY 4pcs GNB 550mah 2S LiPo Battery 90C 180C with XT30 Connector amzn.to/41GbMT1

[@snauzze7007]

So any way to get a little longer flight time …7 mins for me is just gettin warmed up I hate bringing it back down to put another battery in it lol….will it hold a bigger 2s battery than the 600

[@snauzze7007]

I’m trying to decide between the j3 and the p51 …I like both

[@snauzze7007]

I’m trying to decide between the j3 and the p51 …I like both

[@snauzze7007]

I’m trying to decide between the j3 and the p51 …I like both