This Tool Is Gonna Change Your Woodturning View

I just love the feeling of nice burr on scraper and there is something special with Square End.
Although not Square as you'll see in video its so useful, powerfull tool that I really think every turner should have one.
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
_________________________________________________
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@gregdownunderinOz]

Not only is your passion for wood turning evident, but also your passion for teaching . You are a born teacher tommi. I along with a lot of other people have learnt so much from you. Thank you .

[@tomislavtomasicwoodturning]

Thank you Greg soo much

[@balahmay]

Yes, I’m off to make a scraper. I’m going to hold back a little from the 45 degree angle. Learning these scraper techniques has really helped me.

[@STMwoodturning]

I’m planning the same except that I want one a little wider 😅

[@chuckandjanegoodguys2451]

So great! I just had a conversation with a fellow turner. He indicated that this could not be done... MY biggy smile is here. Thanks for this one.!!! Also I am going to grind out some OLD Files to make these.

[@tebscat]

Old files? Bad boy. I inherited several scrapers made from old files with my lathe. They are fantastic. I've got all shapes of them now. Rounded to various depths of curve, undercut box shape, etc. The carbon steel burr is so sharp. They take more regular touching up than HSS, but that's not a problem.

[@kentyler3233]

I’ve learned more from your channel than all the others I have watched. Thank you

[@tomislavtomasicwoodturning]

Thank You for watching

[@scottmedori1437]

The work you do with a scraper is unbelievable. I have learned so much from you

[@tomislavtomasicwoodturning]

Thank you Scott

[@jayscott306]

Very thorough, Tomiskav! Three years ago I hardly touched a scraper & now I really appreciate their usefulness. Looking forward to you next video. :)

[@tomislavtomasicwoodturning]

Glad to hear that sir😀

[@joncooke2450]

Thanks Tomislav, excellent, informative video 👍

[@mickleblade]

I hadn't realised the tool wasn't held against the bench when fitting the handle, thanks

[@mootnmike]

I love your passion for turning. I was resting but now I need to go to the shed and make some shavings. Thank you once again.

[@tomislavtomasicwoodturning]

Thank you, glad to hear that

[@MarklTucson]

Very useful video. I have a 1" square scraper that I need to grind with a curve like this - that will make it much more useful. You have a very clear and understandable style.

[@tomislavtomasicwoodturning]

Thank you Mark,you'll love it

[@claudepotter7763]

Turned out real nice.very cool

[@jorisdemoel3821]

Good thing you like it so much, because you do do it all day. ;-) Thanks for another interesting, amusing and educational video.

[@tomislavtomasicwoodturning]

Very true

[@baconsoda]

This is an excellent video and I will definitely be making one of these scrapers. Best Wishes, Brendan.

[@tomislavtomasicwoodturning]

Thank you Brendan

[@dakotamax2]

My blood pressure drops every time I watch one of your videos. Now, if I could just get it to stay level when I am turning. Looking forward to the debut of the new tool tomorrow!

[@tomislavtomasicwoodturning]

Sorry to hear about blood pressure, but I'm glad to lower it😄

[@calvinderuiter2033]

Excellent video I’m always excited for the next video but what a great cliffhanger 🎉

[@cobberpete1]

I've bee thinking about a 19mm scraper this last week. So now you have convinced me. I will order some tool steel and get one made 😎

[@tomislavtomasicwoodturning]

Glad to hear that 😀

[@TinyWoodworks]

Excellent video, I started using this grind after watching your previous sharpening videos. I had the opportunity to use a recess in one of my last bowls. Using the 1/2” scraper with this grind was so easy and had beautiful results. Thank you for all you have shared.

[@tomislavtomasicwoodturning]

Really glad to hear that, thank you

[@TheRekitter]

It is great how you explain the technique used instead of just demonstrating it. I have learned a lot from your videos. Thank you for another great video.

[@tomislavtomasicwoodturning]

Thank you

[@billstoffle7383]

Great information that every woodworker needs to know

[@orgcoast5990]

Many thanks for addressing end grain tearout!

[@tomislavtomasicwoodturning]

No problem, thank you for watching

[@turningwiththewoods]

Fantastic lesson tomislav

[@randyrockwell6136]

Excellent tutorial on using a scraper …. Can’t wait to try my hand at putting your information into practice. Looking forward to the launch of your Refiner …. Will be watching for the video 🤠🇨🇱

[@tomislavtomasicwoodturning]

Thank you Randy, it was posted today with big news

[@stevenhansen8641]

🕶great video Tomislav. Thanks

[@SteveWagner-re8bn]

Thank you for your time. You are the most informative turner I have watched

[@tomislavtomasicwoodturning]

Thanks soo much, I really appreciate that

[@carolriley8472]

Very informative video!

[@AlienLeader4]

Awesome information. Thanks for sharing. Keep up the amazing work. 👽

[@thomasgregory-g6u]

I broke my Parting tool today so Im off to make a new one after your brill Vidio.

[@allanjgray1]

Thank's for this one.

[@johnnyb95678]

Great information. Thank you!

[@therealjoshmandell]

Very helpful video! Thanks for this, as always. Looking forward to trying out your refiner when it is finally released!

[@tomislavtomasicwoodturning]

Thank you soo much

[@claudepotter7763]

I could watch you vidios all day it's so cool the way you explain everything. But could you show when your turning from your tool rest hight so I can see the angle and from the center I can't tell where to place mine I'm trying some of the things your teaching but isn't working for me.i want to get better. You teach so well

[@tomislavtomasicwoodturning]

I'll do my best, thank you soo much for watching

[@DavidBird-uu8km]

Great information, I look forward to the next video.

[@haenzwiesel7486]

Hi Tommi, perfect timing! Your scraper-training comes just in time and i'm really looking forward to the next vid. I'm still trying to make my scrapers a bit better and struggle with a good burr by finding correct angle on the very last edge. Maybe you can shed light on different angles, e.g. burr on negative rake and what happens with different types of steel grades... I have currently very nice spalted beech and has to handle so much tearouts. Can i finally by your Refiner now 😅?

[@taysider01]

Thanks for video, very informative Tomislav 👍

[@davedarrington7051]

Hi Tomislav I watch many of your videos . This is off subject but, do you have any video on making a Urn for a pet that had to be put down ( not mine but a friend’s ) thanks

[@tomislavtomasicwoodturning]

Unfortunately I don't have but it was on my to do list for videos...so maybe soon you'll see it

[@whittysworkshop982]

A beginner view here, coz I've made these mistakes already 😂 us noobs often want to make things as cheap as possible, but that can hinder us in ways. I bought HSS blanks off Amazon and made me own tools........ But this steel is soft compared to "real" HSS, il need to make a new burr after maybe 3 cuts, this doesn't seem good to me, so buy good steel, i feel a burr should last more than seconds. Make sure your handle blank has grain runnin from end to end; if it runs out to the side then it can more easily split when ya drive the tool steel home. And absolutely tap the backside of the handle to seat the steel....... If ya tap the steel itself into the handle, and ya have slight grain run out, then it'll split for sport...... I've done that with 2 tool handles 😂 tappin the end of the handle is much more gentle in that regard, follow Tomis lead. My main point is about the steel; cheap steel is exactly that, cheap. I got enough steel to make 4 tools for 30euro, one parting tool is about 50euro to buy. These 4 tools i made, already after a couple weeks work I know they are sheight, they dony hold an edge and i know they are the first thing im gonna replace. Yes, get yourself started, buy the cheap steel and make the tools ya need...... It'll also teach ya how to sharpen seeing as the edge will wear quickly. But, the steel really does make a difference. I made a handle and the copper ferrule was a bit long....... I used a homemade skew, a homemade parting tool, a homemade bedan, and a homemade scraper; the copper INSTANTLY took the edge off the tool (normal M2 HSS can cut steel, I use it on metal lathes, copper is like cuttin butter to hss) (these tools were made from the amazon blanks) but i touched it with my M42 Glenn Lucas gouge and it ATE the copper for fun. The steel really does matter lads......... Your homemade scraper/refiner might seem decent, but once ya use a tool with good steel ya won't look back. Buy the good steel, over time the cheap stuff is a waste.

[@cecilhash4698]

great!

[@Danielfrelliaro.]

Como todos tus videos tomislav muy bien explicados

[@julianmortimer5057]

Thanks Tomislav another very informative video. I have sent you a message on your Facebook channel.

[@tomislavtomasicwoodturning]

Hi, did I respond? Sometimes messages on Facebook are few days late, not sure why?

[@julianmortimer5057]

@tomislavtomasicwoodturning no I haven't receiveda response yet Tomislav, the message was sent on Sunday

[@tomislavtomasicwoodturning]

@@julianmortimer5057 on messenger?

[@julianmortimer5057]

@@tomislavtomasicwoodturning not on messenger, but I did leave my email address on the original Facebook chat

[@tomislavtomasicwoodturning]

@@julianmortimer5057 can't see it , send me a message in messenger please or email....😀

[@DamienParkinson-qv6yi]

Could you shear scrape on its side

[@tomislavtomasicwoodturning]

You might do it but its not easy due to shape

[@Amybaumgart]

You made a very long handle, how far will you have that tool end hang over the tool rest? Can’t wait to get your refiner!

[@tomislavtomasicwoodturning]

Thank you Amy, I hollow pretty much up to a ferrule if needed.

[@Joe-wi1yj]

Great video Tomislav. How did you like your handle you made?

[@tomislavtomasicwoodturning]

Actually its quite nice and comfy

[@wayne_hishandswoodworking]

Will the refiner be available in the states?

[@tomislavtomasicwoodturning]

I will be able to ship it to States 😀

[@jamesmccoll4211]

Where can I buy the scraper with tang, please.

[@tomislavtomasicwoodturning]

These square end are available from pretty much every woodturning store

[@mandyray23]

Do you sell these scrapers? Interested customer here! 🙋🏼‍♀️

[@tomislavtomasicwoodturning]

I will be custom making them, I posted a new video today on that topic

[@jeffdeluca1153]

You are a wealth of information! I'm learning a lot. Are you also familiar with Steve at Woodturner21? I believe he's in the UK. I love your teaching knowledge and willingness to make these videos. Jeff from USA

[@tomislavtomasicwoodturning]

Thank you Jeff,I'm honored to be able to pass on what I know. I know Steve, he is I believe 3rd generation turner in his family and all around nice person

[@jeffdeluca1153]

@tomislavtomasicwoodturning between Steve and you, I have lost any fear I had of the skew. It is becoming my tool of choice. Hope all is well in your corner of this world! 🙏

[@tomislavtomasicwoodturning]

@@jeffdeluca1153 really glad to hear that sir... yes we are OK,hopefully you as well

[@jeffdeluca1153]

@tomislavtomasicwoodturning We will be. Our country as you may have seen os in some political turmoil, but we have come through it before. We need to be an example for the world and our GOP has disappointed us lately. I pray daily for Ukraine as well 🙏

[@jimbrock8928]

Can you ship your tools to US?

[@tomislavtomasicwoodturning]

I will be able to😀

[@philliparm]

I worry when I watch you holding your left arm over the head stock while wearing long sleeves. You are obviously very experienced but still that’s very risky and has caused serious harm and even fatalities to workers making the same error. Otherwise respect to you