This ZRO Delta FKS-9 Glock Clone Is Driving Me Crazy!

[@vborg001]

Congrats on your 50K, I'll try to be here for your next 50k👍👍

[@RTTGunsGear]

I'll try to be around for 50k more! Lol.. Thanks Vborg

[@eltenda]

Excellent review bro!

[@RTTGunsGear]

Thanks bro!

[@travistucker4067]

50k brother!🔥

[@RTTGunsGear]

@travistucker4067 Thanks man!! I appreciate it!

[@Bull1175]

Good job Matt on the 50k subs

[@RTTGunsGear]

@Bull1175 I appreciate it man!!!

[@desertrosetucson]

Congratulations on the 50,000 and it's a sharp looking clone

[@RTTGunsGear]

@@desertrosetucson Thank you!

[@drysori]

Try replacing the gen3 ejector with a gen5. I had the same problem with a P80 build and that solved it.

[@RTTGunsGear]

@drysori So I've since put a new OE Glock ejector in it and it "sort of" solved it. The ejection is still super erratic, but the cases aren't bouncing off my face..lol. I may try the gen 5 too. Thanks!

[@ChrisFromThe740]

Great review Matt

[@RTTGunsGear]

Thanks bro!

[@tonycall8059]

I've had similar issues that were fixed by changing the gen3 ejector to a gen4.

[@RTTGunsGear]

@tonycall8059 Thanks! Someone else here mentioned switching to gen 5 fixed their issue. I might just get one of each and start testing. Thanks!

[@fluffy10mmjeepguy92]

👍👍.....😂 on the opening scene.

[@RTTGunsGear]

@@fluffy10mmjeepguy92 Thanks bro!

[@jrh1704]

Loved the review! I was looking at this FKS-9 a month or so ago and didn't want to gamble on it, but I wanted the thumb rests on the frame so bad. I found out it was Grit Grips (I had never heard of before) and purchased a receiver instead. I'm glad the trigger is good as I will probably purchase a trigger from GG next. Unless anyone here can suggest otherwise for a RELIABLE trigger with 4lb pull or less and a short reset. I'm spoiled by all of my Canik triggers and find myself not enjoying the OEM triggers from most manufacturers on striker fire guns.

[@GeraldMeurer-ef7yv]

Congrats ok 50k

[@RTTGunsGear]

@GeraldMeurer-ef7yv Thanks man! And thanks for watching!

[@death-to-dogma6142]

Please tell Grit Grips to make a 17 frame.

[@RTTGunsGear]

@death-to-dogma6142 I've been hearing that request a lot. Hopefully they listen. Personally, I'd prefer a G45/19X frame.

[@death-to-dogma6142]

@RTTGunsGear I think that would slap. I have a 17 slide that needs a home and really like what Grit Grips is doing.

[@notagunchannel]

You can fix the ejection pattern issue by changing by changing out the ejector to a gen 5 ejector. Most glock gen 3 clones have this issue not sure why they dont change that

[@RTTGunsGear]

@notagunchannel You're the third or fourth person to suggest a gen 4 or 5 ejector. I'm probably going to play around with that. Of all of my gen 3 clones however. This is the only one to have had this issue. I appreciate it!

[@DesertTactical]

I seriously thought it was a CA Slide in the beginning. Cool intro, man. Lol. Did it come with a Gen 3 or Gen 4 ejector? A gen 4 would solve the ejection pattern issue.

[@peters303]

Looks a very competitive clone, pricewise also. I wonder if the ejection issues are a one-off model or this is a general design issue. Soild review 💪🏼🇺🇸 Congrats on a well deserved 50k

[@billbristow1768]

I got rid of a Kimber micro 9 because it discharged the brass in a similar fashion. It really will piss you off.

[@charles17508]

Nice review man . I try to have zero fcks to and that is why i only buy glocks .if i wanted a gen 3 id buy a police trade in for a few hundred if i needed a cheaper gun i would never get a cheap gun my friend bought a cheap slide and it cracked at 10 thousand rounds im good on that .

[@RTTGunsGear]

@@charles17508 I appreciate it! And thanks for watching! I have had a mixed bag of luck with aftermarket Glock clones. Some have been phenomenal. Some are not perfect and sometimes sort of ho-hum. But if I were to have only one Glock style pistol, it would definitely be a Glock and not a clone. Thanks again!

[@WileyE.Coyote-i7c]

I really wanted to like the ready rifles, snagged a blem from them a year ago, it is what it is. Have wondered about their pistols for over a year, just havent broken down to buy one

[@RTTGunsGear]

@@WileyE.Coyote-i7c I will say that other people I know with this pistol aren't having the same ejection issues. We'll see how this turns out at 1000 rounds.

[@jamoney5720]

My Swenson slide on my p80 throws brass back at me just like that I was like damn did I just get hit by ricochet

[@jrh1704]

If this is compatible with gen 3 parts, I wonder if changing out the extractor to an OEM glock would help?

[@RTTGunsGear]

I did. I put an OE gen 3 ejector in it. It has helped, some. I'm going to try a couple more things before I hit the 1000 round review.

[@T.A.B.Videos]

👍👍

[@RTTGunsGear]

@@T.A.B.Videos Thanks for watching Don!

[@jesseboutdoors]

Love the name of it 🤣

[@RTTGunsGear]

@@jesseboutdoors S-tier name for sure! Thanks Jesse

[@Watchdog78]

G45 grit grips frame