20 Hp Johnson Parts Pickin Day & Repairs

20 Hp Johnson Parts Pickin Day & Repairs - THIS OLD OUTBOARD

Рет қаралды 1,986

THIS OLD OUTBOARD

Күн бұрын

Пікірлер: 51

@TheSteelworker 8 ай бұрын

When you’re done messing with that Chinese pump, I wanna see you do a wheelie on that Japanese bike! 🤣 Good video 👍

@THISOLDOUTBOARD1 8 ай бұрын

Hahaha! Thanks for tuning in! (its Italian)

@mikedurhan9941 8 ай бұрын

As Randy (below) said, put in two seals back-to-back. One keeps lube in, the other keeps water out. Thanks for the video.

@THISOLDOUTBOARD1 8 ай бұрын

Thanks for tuning in!

@VernonTate-y1i 8 ай бұрын

Coming along nice looking good 👍🏻🤘🏻

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Yeah. She'll get there! hahaha just hate the setbacks! Thanks !

@danielrobert7181 8 ай бұрын

From time to time, we all get one of those chewed up brass orifices. I then enlarge the orifice, stick the biggest bolt extractor that'll fit without damaging the bowl's threads, pull out the orifice and lightly seat a new one in there. Regards !

@THISOLDOUTBOARD1 8 ай бұрын

Thanks again !

@stevengaines1935 8 ай бұрын

Spring cleaning lots of fun

@THISOLDOUTBOARD1 8 ай бұрын

Fun Fun Fun! Thanks !

@skippystirling9770 8 ай бұрын

Them fuel pumps are a fiddley pain in the ass to rebuild good luck 🤞

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Thanks for tuning in. Yeah p-i-t-a! Hahaha Thanks again !

@kenleydixon1365 8 ай бұрын

Have a good day,✌🏾

@THISOLDOUTBOARD1 8 ай бұрын

Thank You!

@shawnsingleton3034 8 ай бұрын

The damn springs been rubbing on my 25 Evinrude now I got the fix thank you sir 👍

@THISOLDOUTBOARD1 8 ай бұрын

Hey! Glad it helped. Thanks for tuning in!

@CaptnGlenn 8 ай бұрын

Was that bushing you chiseled out brass? Maybe put a little bit of heat on it next time to save chance of damage to housing? Good luck on the smalls! Means to an end my friend!!

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Thanks for tuning in. Yes old school brass driveshaft oil seal. They don't make like that any more! Thanks again !

@stevewhite4621 8 ай бұрын

Gotta eat! Enjoy your videos!

@THISOLDOUTBOARD1 8 ай бұрын

You got that right! Thanks for tuning in!

@randyyoung9892 8 ай бұрын

Those little seals I would put in 2 thanks for the Saga get down and spear yourself a tilapia

@timenfinger41 8 ай бұрын

I put two in mine also, one facing down and one facing up.

@THISOLDOUTBOARD1 8 ай бұрын

What happen to my reply? Wow that was 5 hours ago! and your not in "comments I haven't answered" list. weird, anyway. I said I thought that was strange, its usually 2 seals but the schematic said 1 on marineengine.com. I was just coming back to ask if you think the one seal is gonna bite me in the ass! I see you got the heart. Hahaha Thanks

@randyyoung9892 8 ай бұрын

1 seal should do the trick I use 2 when the shaft is worn but if it's ok don't worry about it 👍

@THISOLDOUTBOARD1 8 ай бұрын

@@randyyoung9892 Cool man I'll keep an eye on it! Thanks

@timenfinger41 8 ай бұрын

Hopefully one does work for you, I'll stay tuned to see. But the diagram at Crowley Marine for my 1984 25hp shows 2 of them, one up and one down. The two seals fill the space of the single original single seal perfectly. The bottom seal is supposed to keep the oil in and the upper is supposed to keep the water out. Thank you for the great videos!!

@victorremick9721 8 ай бұрын

Maybe next time

@THISOLDOUTBOARD1 8 ай бұрын

Thanks again !

@brucem9868 8 ай бұрын

I’m look for a tiler handle for a 35 hp force if you got one

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Thanks for tuning in. Sorry no Force/Merc parts. Try ebay!

@ricksebrell8094 7 ай бұрын

Do you have any ideas or suggestions for how to fix a 20hp Johnson 50th Anniversary,outboard? It fell over and broke off the tiller arm end and the midsection hole where it connects?(its on the tiller arm side without the gear and linkage)

@THISOLDOUTBOARD1 7 ай бұрын

Hey. Thanks for tuning in. Best bet is to check ebay for parts and replace everything thats broken. 18 - 20/25 horse parts will work through that era. Thanks again & Stay tuned !

@ricksebrell8094 7 ай бұрын

Thanks, i’ve been looking. Haven’t had much luck yet for those parts. I was hoping maybe there was a way to weld them back together or something.

@landonwilson-pf8dj 8 ай бұрын

I have a 1974 9.9 evinrude that I am puzzled on and figured I would ask for help. I have good compression and spark. I am getting fuel to the fuel pump the from the fuel pump to the carb. I have clean everything in the carb all the little holes and jets and it will hit and sputter then die. Any idea on what I could try next? It’s almost like I can’t get gas through the intake or maybe I am. Are the reeds stuck?could it be the points? What would you try next?

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Thanks for tuning in. Is the choke working properly, if you don't open the choke up as soon as it fires it will flood and sputter out. After it sputters and dies pull the plugs out and see if they're wet or dry. If wet, then you'll know the fuel is getting to the plugs. If they're soaking wet then its getting to much fuel, flooding out, weak spark, timing is off. I think your best bet is to go here, web.archive.org/web/20160221095546/leeroysramblings.com/Outboard%20Motor%20Related/OMC%20outboard%20related%20articles.html. This is leeroys ramblings, the website is down but I was able to find this link through the "wayback" machine so be sure and bookmark it. Everything you ever need to know is there. Leeroys is where I learned everything! Thanks again !

@artstates960 8 ай бұрын

No start today😢. All the little gotcha stuff, but you are getting closer. TOO on the case.

@THISOLDOUTBOARD1 8 ай бұрын

Yep! Thanks for tuning in!

@seniorLu48 6 ай бұрын

Good morning friend, I have a question maybe you can help. It's regarding 1969 johnson 20hp lower unit spaghetti rubber seal, I go online and give them the right part number but keep sending me the wrong one. The 20hp seal is larger than one for a 10hp. I you have that part number and where you get your parts I appreciate it. Thank you

@THISOLDOUTBOARD1 6 ай бұрын

Hey. 309044, 0309044 is the part number according to marineengine.com, says it's 7/8. but boats.net says its 7/16. I use ebay for parts most of the time. Go there and search both numbers, you'll be able to see what your getting and can ask the seller for actual size. They'll cut the length you want also. Give it a shot! Thanks !

@seniorLu48 6 ай бұрын

Gracias friend I appreciate it...enjoy your videos you have great personality and down to earth.

@hunterlucas27 8 ай бұрын

Hey I got a 1996 25 hp Johnson how much compression should it have I have 74 psi on boat cylinder is that to low to run

@THISOLDOUTBOARD1 8 ай бұрын

Hey. Thanks for tuning in. Yeah thats low for a 25, but the rings may be stuck, did you just get it and/or has it been sitting for awhile? If thats the case take the bypass cover off and see if they're stuck and that way you can see the pistons too and what kind of shape they're in.

@hunterlucas27 8 ай бұрын

@@THISOLDOUTBOARD1 no sir I’ve been running it for years. Just the past weekend I was running across the the lake and it just died and would start back up

@THISOLDOUTBOARD1 8 ай бұрын

@@hunterlucas27 wow, Well if its been running that long you may have another issue. You'll have to go through it, is it a fuel issue or an ignition problem. Curious to know what you find out...